Citations (42)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (3)
Krsto Sbutega & Ivan Catton. (2016) Galerkin method solution of a volume-averaged model for efficient conjugate heat transfer analysis. Numerical Heat Transfer, Part B: Fundamentals 69:1, pages 1-25.
Read now
Read now
Binoy Baby & ChoondalB. Sobhan. (2012) Investigations on Forced Convection in Compact Passages With Surface Irregularities. Heat Transfer Engineering 33:13, pages 1105-1119.
Read now
Read now
SatishG. Kandlikar & CliffordN. Hayner$suffix/text()$suffix/text(). (2009) Liquid Cooled Cold Plates for Industrial High-Power Electronic Devices—Thermal Design and Manufacturing Considerations. Heat Transfer Engineering 30:12, pages 918-930.
Read now
Read now
Articles from other publishers (39)
Bairi Levi Rakshith, Lazarus Godson Asirvatham, Appadurai Anitha Angeline, Stephen Manova, Jefferson Raja Bose, J Perinba Selvin Raj, Omid Mahian & Somchai Wongwises. (2022) Cooling of high heat flux miniaturized electronic devices using thermal ground plane: An overview. Renewable and Sustainable Energy Reviews 170, pages 112956.
Crossref
Crossref
Guangming Liu, Caiwei He, Qiaowei Wen, Zhangyuan Wang, Xianling Wang, Samson Shittu, Xudong Zhao & Menglong Hu. (2022) Investigation on visualization and heat transfer performance study of the mini-channel flow boiling. International Communications in Heat and Mass Transfer 138, pages 106360.
Crossref
Crossref
Moza Alteneiji, Mohamed I. Hassan Ali, Kamran A. Khan & Rashid K. Abu Al-Rub. (2022) Heat transfer effectiveness characteristics maps for additively manufactured TPMS compact heat exchangers. Energy Storage and Saving 1:3, pages 153-161.
Crossref
Crossref
Ehtesham Ali, Jaehyun Park, Jaemun Choi, Changwoo Han & Heesung Park. (2022) Enhanced thermal performance of vortex generating liquid heat sink for the application of cooling high voltage direct current devices. Heat and Mass Transfer 58:7, pages 1157-1169.
Crossref
Crossref
Murat Parlak, Abuzer Özsunar & Ali Koşar. (2022) High aspect ratio microchannel heat sink optimization under thermally developing flow conditions based on minimum power consumption. Applied Thermal Engineering 201, pages 117700.
Crossref
Crossref
Pengyang Qu, Wei Li, Yu Dong, Hanzhong Tao, Jianjie Cheng & Yannan Li. (2021) Heat dissipation performance of a heat pipe radiator with rectangular longitudinal fin under natural convection. Journal of Physics: Conference Series 1885:2, pages 022057.
Crossref
Crossref
Wei Lin & C. P. Wong. 2021. Nano-Bio- Electronic, Photonic and MEMS Packaging. Nano-Bio- Electronic, Photonic and MEMS Packaging
31
60
.
Jinzhi Zhou, Xiaoling Cao, Nan Zhang, Yanping Yuan, Xudong Zhao & David Hardy. (2020) Micro-Channel Heat Sink: A Review. Journal of Thermal Science 29:6, pages 1431-1462.
Crossref
Crossref
D. E. Alnak & K. Karabulut. (2021) Effect of Arc Shaped Bar on Heat Transfer and Fluid
Characteristics at Cooling of Electronic Equipment. Journal of Engineering Thermophysics 29:4, pages 657-673.
Crossref
Crossref
Claude Aurélien Kamdem Kamdem & Xiaolu Zhu. (2020) Numerical Study on the Flow and Heat Transfer Coupled in a Rectangular Mini-Channel by Finite Element Method for Industrial Micro-Cooling Technologies. Fluids 5:3, pages 151.
Crossref
Crossref
Anil Yuksel, Vic Mahaney & Chris Marroquin. (2020) Coldplate Design for Optimal Thermal Performance of High-Speed Electronics. Coldplate Design for Optimal Thermal Performance of High-Speed Electronics.
Ruikang Wu, Yiwen Fan, Tao Hong, Hao Zou, Run Hu & Xiaobing Luo. (2019) An immersed jet array impingement cooling device with distributed returns for direct body liquid cooling of high power electronics. Applied Thermal Engineering 162, pages 114259.
Crossref
Crossref
Linquan Ping, Peng-Xiang Hou, Chang Liu & Hui-Ming Cheng. (2019) Vertically aligned carbon nanotube arrays as a thermal interface material. APL Materials 7:2.
Crossref
Crossref
Eren Sevinchan, Ibrahim Dincer & Haoxiang Lang. (2018) A review on thermal management methods for robots. Applied Thermal Engineering 140, pages 799-813.
Crossref
Crossref
Katharina Lang & Peer Löbmann. (2018) BN—hybrid polymer composites: influence of particle surface functionalization. Journal of Sol-Gel Science and Technology 86:1, pages 135-140.
Crossref
Crossref
Hafiz Muhammad Ali & Adeel Arshad. (2017) Experimental investigation of n-eicosane based circular pin-fin heat sinks for passive cooling of electronic devices. International Journal of Heat and Mass Transfer 112, pages 649-661.
Crossref
Crossref
Mathias Fink, Daniela Collin & Peer Löbmann. (2017) Hybrid polymer incorporating BN particles: Thermal, mechanical, and electrical properties. Journal of Sol-Gel Science and Technology 83:2, pages 489-494.
Crossref
Crossref
A. S. Rosas, R. K. Ali, A. A. Abdel-Aziz & K. M. Elshazly. (2016) An experimental investigation of convective heat transfer enhancement in electronic module using curved deflector. Heat and Mass Transfer 53:3, pages 985-994.
Crossref
Crossref
Fatemeh Tavakkoli, Siavash Ebrahimi, Shujuan Wang & Kambiz Vafai. (2016) Analysis of critical thermal issues in 3D integrated circuits. International Journal of Heat and Mass Transfer 97, pages 337-352.
Crossref
Crossref
Arthur Suszko & Mohamed S. El-Genk. (2016) Thermally anisotropic composite heat spreaders for enhanced thermal management of high-performance microprocessors. International Journal of Thermal Sciences 100, pages 213-228.
Crossref
Crossref
A. K. Lakshminarayanan, M. Suresh & M. Sibi Varshan. (2015) Thermal Performance Evaluation of Friction Stir Welded and Bolted Cold Plates with Al/Cu Interface. JOM 67:5, pages 1032-1044.
Crossref
Crossref
Tisha Dixit & Indranil Ghosh. (2015) Review of micro- and mini-channel heat sinks and heat exchangers for single phase fluids. Renewable and Sustainable Energy Reviews 41, pages 1298-1311.
Crossref
Crossref
Krsto Sbutega, David Geb & Ivan Catton. 2015.
1
165
.
Meamer El Nakla. (2013) Forced Convection Heat Transfer in Two-Dimensional Ribbed Channels with Varying Heat Flux Profiles Using ANSYS’ Software and Modeling. Arabian Journal for Science and Engineering 39:3, pages 2157-2164.
Crossref
Crossref
Gongnan Xie, Fengli Zhang, Bengt Sundén & Weihong Zhang. (2014) Constructal design and thermal analysis of microchannel heat sinks with multistage bifurcations in single-phase liquid flow. Applied Thermal Engineering 62:2, pages 791-802.
Crossref
Crossref
Rajesh Baby & C. Balaji. (2013) Thermal optimization of PCM based pin fin heat sinks: An experimental study. Applied Thermal Engineering 54:1, pages 65-77.
Crossref
Crossref
S. Shenoy, J.F. Tullius & Y. Bayazitoglu. (2011) Minichannels with carbon nanotube structured surfaces for cooling applications. International Journal of Heat and Mass Transfer 54:25-26, pages 5379-5385.
Crossref
Crossref
Kazuhisa Yuki & Koichi Suzuki. (2011) Applicability of Minichannel Cooling Fins to the Next Generation Power Devices as a Single-Phase-Flow Heat Transfer Device. Transactions of The Japan Institute of Electronics Packaging 4:1, pages 52-60.
Crossref
Crossref
Giulio Lorenzini, Simone Moretti & Alessandra ContiGiulio Lorenzini, Simone Moretti & Alessandra Conti. 2011. Fin Shape Thermal Optimization Using Bejan’s Constructal Theory. Fin Shape Thermal Optimization Using Bejan’s Constructal Theory
5
17
.
Giulio Lorenzini, Simone Moretti & Alessandra Conti. 2011. Fin Shape Thermal Optimization Using Bejan’s Constructal Theory. Fin Shape Thermal Optimization Using Bejan’s Constructal Theory.
R. Navaneetha Krishnan, S. Vivek, Dhiman Chatterjee & Sarit K. Das. (2010) Performance of numerical schemes in the simulation of two-phase free flows and wall bounded mini channel flows. Chemical Engineering Science 65:18, pages 5117-5136.
Crossref
Crossref
Wei Lin & C.P. Wong. 2010. Nano-Bio- Electronic, Photonic and MEMS Packaging. Nano-Bio- Electronic, Photonic and MEMS Packaging
87
138
.
Giulio Lorenzini & Simone Moretti. (2009) Numerical Performance Analysis of Constructal I and Y Finned Heat Exchanging Modules. Journal of Electronic Packaging 131:3.
Crossref
Crossref
Giulio Lorenzini & Simone Moretti. (2009) A Bejan’s Constructal Theory Approach to the Overall Optimization of Heat Exchanging Finned Modules With Air in Forced Convection and Laminar Flow Condition. Journal of Heat Transfer 131:8.
Crossref
Crossref
Qizhen Liang, Yonghao Xiu, Wei Lin, Kyoung-Sik Moon & C. P. Wong. (2009) Epoxy/h-BN composites for thermally conductive underfill material. Epoxy/h-BN composites for thermally conductive underfill material.
Qizhen Liang, Kyoung-Sik Moon & C. P. Wong. (2008) High thermal conductive underfill materials for flip-chip application. High thermal conductive underfill materials for flip-chip application.
Qizhen Liang, Kyoung-Sik Moon, Yuelan Zhang & C. P. Wong. (2008) Low stress and high thermal conductive underfill for cu/low-k application. Low stress and high thermal conductive underfill for cu/low-k application.
P.Y. Paik, V.K. Pamula & K. Chakrabarty. (2008) Adaptive Cooling of Integrated Circuits Using Digital Microfluidics. IEEE Transactions on Very Large Scale Integration (VLSI) Systems 16:4, pages 432-443.
Crossref
Crossref
Giulio Lorenzini & Simone Moretti. (2007) Numerical analysis on heat removal from Y-shaped fins: Efficiency and volume occupied for a new approach to performance optimisation. International Journal of Thermal Sciences 46:6, pages 573-579.
Crossref
Crossref