Citations (21)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (15)
Yunqiang Zhao, Haokun Yang, Detao Cai, Aloshyn Andrii, Jiaxin Li & Xuan Chen. (2024) Hot-pressing treatment to improve the shear strength of refill friction stir spot-welded 1060 Al–carbon fiber–reinforced plastic joint. Journal of Adhesion Science and Technology 38:5, pages 704-715.
Read now
Read now
Di Jiang, I. N. Kolupaev, HongFeng Wang & Xiaole Ge. (2023) Analysis of mechanical properties of 6010-T6 aluminum alloy without Tool Tilt Angle friction stir welding. Journal of Adhesion Science and Technology 37:13, pages 2010-2024.
Read now
Read now
S. Yaknesh, K. Sampathkumar, P. Sevvel & I. John Solomon. (2023) Generation of force and torque during joining of AZ91C plates by FSW under distinctive tool tilt angle and their impact on mechanical strength and micro-structure. Journal of Adhesion Science and Technology 37:6, pages 1071-1090.
Read now
Read now
K. N. Uday & G. Rajamurugan. (2023) Influence of process parameters and its effects on friction stir welding of dissimilar aluminium alloy and its composites – a review. Journal of Adhesion Science and Technology 37:5, pages 767-800.
Read now
Read now
Muhsin Ahmad Khan, Ravi Butola & Nirman Gupta. (2023) A review of nanoparticle reinforced surface composites processed by friction stir processing. Journal of Adhesion Science and Technology 37:4, pages 565-601.
Read now
Read now
Ramin Delir Nazarlou & Faraz Omidbakhsh. (2022) Evaluation of bulk defects area in friction stir welded 1080 aluminum alloy utilizing electrical resistivity measurements. Journal of Adhesion Science and Technology 36:17, pages 1921-1931.
Read now
Read now
AnandhaKumar C. J.Gopi S.Dhanesh G. Mohan & ShashiKumar S.. (2022) Predicting the ultimate tensile strength and wear rate of aluminium hybrid surface composites fabricated via friction stir processing using computational methods. Journal of Adhesion Science and Technology 36:16, pages 1707-1726.
Read now
Read now
Jayashree Das, P. Sreedharan Robi & Sankar Mamilla Ravi. (2022) Estimation of deformation behaviour at different weld zones of FSWed 2014 aluminium alloy through impression creep technique. Journal of Adhesion Science and Technology 36:3, pages 240-260.
Read now
Read now
Chang Li, Dacheng Zhang, Xing Gao, Hexin Gao & Xing Han. (2021) Numerical simulation and experimental research on friction stir welding of 2024-T3 aeronautical aluminum alloy. Journal of Adhesion Science and Technology 35:20, pages 2230-2248.
Read now
Read now
Wenming Liu, Yinfei Yan, Ruiyang Ni, Tao Sun, Siyu Wu & Yifu Shen. (2021) Numerical simulation and experimental investigation of subzero liquid SFSW of ME20M magnesium alloy. Journal of Adhesion Science and Technology 35:20, pages 2184-2201.
Read now
Read now
Mansour Mardalizadeh, Mehrdad Khandaei & Mohammad Ali Safarkhanian. (2021) Influence of travel speed on the microstructural evaluation and mechanical characteristics of bobbin tool friction stir-welded thick AA5456-H112 plates. Journal of Adhesion Science and Technology 35:1, pages 90-109.
Read now
Read now
Ting Liu, Xiaohong Zhan & Yue Kang. (2020) The influence of thermal distribution on macro profile and dendrites morphology based on temperature field simulation of 6061 aluminum alloy laser welded joint. Journal of Adhesion Science and Technology 34:19, pages 2144-2160.
Read now
Read now
Manoj Kumar Gupta. (2020) Effects of tool profile on mechanical properties of aluminium alloy Al 1120 friction stir welds. Journal of Adhesion Science and Technology 34:18, pages 2000-2010.
Read now
Read now
Sunil Kumar Tiwari, Harsh Sharma & Akula Umamaheswara Rao. A comprehensive review of the recent developments in friction stir welding of metals, alloys, and polymers: a review of process parameters and properties. Journal of Adhesion Science and Technology 0:0, pages 1-24.
Read now
Read now
Yibo Sun, Yuan Zhang, Haiwei Long, Jianning Zhu, Libin Fu & Xinhua Yang. Study on the interfacial microstructure evolution of aluminum and CFRTP on FSLW joints: influence of pin length. Journal of Adhesion Science and Technology 0:0, pages 1-13.
Read now
Read now
Articles from other publishers (6)
Q. Qiao, M. Zhou, X. Gong, S. Jiang, Y. Lin, H. Wang, W.I. Lam, H. Qian, D. Guo, D. Zhang, C.T. Kwok, X. Li & L.M. Tam. (2024) In-situ monitoring of additive friction stir deposition of AA6061: Effect of layer thickness on the microstructure and mechanical properties. Additive Manufacturing 84, pages 104141.
Crossref
Crossref
Tianfan Jiang, Jinpeng Hu, Yifu Shen, Tao Sun, Ruiyang Ni, Fujun Cao, Tao Yu & Guangming Zhou. (2024) Effect of a novel pin tool with large diameter disc on the microstructure and mechanical properties of Al/Mg dissimilar friction stir lap joint. The International Journal of Advanced Manufacturing Technology 130:11-12, pages 5251-5267.
Crossref
Crossref
Rahul Biradar & Sachinkumar Patil. (2023) Tensile, microhardness and microstructural characteristics of friction stir welded/processed AA7075 alloy: A review. Materials Today: Proceedings.
Crossref
Crossref
Surendra Kumar Lader, Mayuri Baruah, Raj Ballav & Swarup Bag. (2023) Recent Developments in Friction Stir Welding Tools for Weld Bead Defects Minimization – A Review. Soldagem & Inspeção 28.
Crossref
Crossref
K. Giridharan, P. Sevvel, B. Stalin, M. Ravichandran & P. Sureshkumar. (2022) Microstructural Analysis and Mechanical Behaviour of Copper CDA 101/AISI-SAE 1010 Dissimilar Metal Welds Processed by Friction Stir Welding. Materials Research 25.
Crossref
Crossref
Pradyumn Kumar Arya, Dan Sathiaraj, Neelesh Kumar Jain, Murugesan Jayaprakash & Kuldeep K. Saxena. (2022) Microstructure, mechanical and corrosion behaviour of friction stir welding of AA6061 Al alloy and AZ31B Mg alloy. Metallurgical Research & Technology 119:4, pages 413.
Crossref
Crossref