http://orcid.org/0000-0002-3547-800X
Citations (25)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (11)
K. N. Uday & G. Rajamurugan. (2023) Influence of process parameters and its effects on friction stir welding of dissimilar aluminium alloy and its composites – a review. Journal of Adhesion Science and Technology 37:5, pages 767-800.
Read now
Read now
Pradyumn Kumar Arya, Neelesh Kumar Jain, Jayaprakash Murugesan & Vinay Kumar Patel. (2022) Developments in friction stir welding of aluminium to magnesium alloy. Journal of Adhesion Science and Technology 36:13, pages 1365-1402.
Read now
Read now
Husain Mehdi & R. S. Mishra. (2022) Consequence of reinforced SiC particles on microstructural and mechanical properties of AA6061 surface composites by multi-pass FSP. Journal of Adhesion Science and Technology 36:12, pages 1279-1298.
Read now
Read now
Ravi Butola, Deepak Pandit, Chandra Pratap & Prakash Chandra. (2022) Two decades of friction stir processing–a review of advancements in composite fabrication. Journal of Adhesion Science and Technology 36:8, pages 795-832.
Read now
Read now
Jayashree Das, P. Sreedharan Robi & Sankar Mamilla Ravi. (2022) Estimation of deformation behaviour at different weld zones of FSWed 2014 aluminium alloy through impression creep technique. Journal of Adhesion Science and Technology 36:3, pages 240-260.
Read now
Read now
Mansour Mardalizadeh, Mohammad Ali Safarkhanian & Mehrdad Khandaei. (2021) Macro- and microstructure analysis and mechanical characteristics of thick AlMg5 alloy plates joined by floating-bobbin friction stir welding. Journal of Adhesion Science and Technology 35:12, pages 1284-1304.
Read now
Read now
Xiaopeng Li, Chenshuo Li, Zhimin Liang, Qian Xusheng & Dianlong Wang. (2021) Research on the corrosion behavior of double-side friction stir welded 6082Al alloy thick plate. Journal of Adhesion Science and Technology 35:9, pages 993-1005.
Read now
Read now
Akbar Heidarzadeh, Babak Taghizadeh & Ahad Mohammadzadeh. (2021) In-situ formation of Zn oxide particles in CuZn matrix during friction stir processing. Journal of Adhesion Science and Technology 35:9, pages 1006-1013.
Read now
Read now
Sameer M. D.Anil Kumar Birru. (2021) Selection of friction stir welding tool rotational speed for joining dual phase DP600 steel sheets – an experimental approach. Journal of Adhesion Science and Technology 35:7, pages 751-776.
Read now
Read now
Sunil Kumar Tiwari, Harsh Sharma & Akula Umamaheswara Rao. A comprehensive review of the recent developments in friction stir welding of metals, alloys, and polymers: a review of process parameters and properties. Journal of Adhesion Science and Technology 0:0, pages 1-24.
Read now
Read now
Mithilesh K. Dikshit, R. Srinivas, Sanket Panchal, Manoj Agrawal, Arti Verma & Vimal K. Pathak. Experimental investigation on the mechanical properties of resistance seam welding of thin sheet. Journal of Adhesion Science and Technology 0:0, pages 1-21.
Read now
Read now
Articles from other publishers (14)
Jitendra Kumar, Gaurav Kumar, Husain Mehdi & Mukesh Kumar. (2023) Optimization of FSW parameters on mechanical properties of different aluminum alloys of AA6082 and AA7050 by response surface methodology. International Journal on Interactive Design and Manufacturing (IJIDeM) 18:3, pages 1359-1371.
Crossref
Crossref
Chendra Sekhar sunnapu & Murahari kolli. (2024) Experimental investigation of Al 5083 alloy using friction stir welding process through taguchi method. International Journal on Interactive Design and Manufacturing (IJIDeM).
Crossref
Crossref
Rajesh Rathore, Manoj Kumar Gupta, Nitesh Singh Rajput & Amit Kumar Kundu. (2023) Effects of Tool Rotational Speed on Friction Stir Welded Joints of 1120 Al. Iranian Journal of Science and Technology, Transactions of Mechanical Engineering 47:4, pages 1891-1901.
Crossref
Crossref
Behrouz Abnar, Samaneh Gashtiazar & Mousa Javidani. (2023) Friction Stir Welding of Non-Heat Treatable Al Alloys: Challenges and Improvements Opportunities. Crystals 13:4, pages 576.
Crossref
Crossref
Amit Kumar Kundu, Manoj Kumar Gupta, Nitesh Singh Rajput & Rajesh Rathore. (2022) Adhesive assisted TiB2 coating effects on friction stir welded joints. Scientific Reports 12:1.
Crossref
Crossref
Gurijala Chakravarthi, Krishan Giridharan, Balasubramaniam Stalin, Sambandam Padmanabhan, Subramani Sekar, Nagaraj Nagaprasad, Leta Tesfaye Jule & Ramaswamy Krishnaraj. (2022) Investigation on the effect of process parameters on mechanical and microstructural properties of AA8011 similar FSW weld joints. Advances in Mechanical Engineering 14:7, pages 168781322211121.
Crossref
Crossref
Utkarsh Chadha, Senthil Kumaran Selvaraj, Neha Gunreddy, S. Sanjay Babu, Swapnil Mishra, Deepesh Padala, M. Shashank, Rhea Mary Mathew, S. Ram Kishore, Shraddhanjali Panigrahi, R. Nagalakshmi, R. Lokesh Kumar & Addisalem Adefris. (2022) A Survey of Machine Learning in Friction Stir Welding, including Unresolved Issues and Future Research Directions. Material Design & Processing Communications 2022, pages 1-28.
Crossref
Crossref
Chandra Pratap, Prakash Chandra, Ravi Butola & Anurag Shukla. (2022)
Fabrication and Characterization of AA6063/B
4
C Metal Matrix Surface Nanocomposite Using Friction Stir Processing
. ECS Journal of Solid State Science and Technology 11:3, pages 033010.
Crossref
Crossref
Lin-yue Bai, Fei Shao, Qing-na Ma, Qian Xu, Jian-xiang Hu & Yi-nan Hou. (2022) Mechanism of corrosion fatigue fracture of friction stir welding joints of 7075 aluminium alloy in 3.5% NaCl solution7075铝合金搅拌摩擦焊焊接接头在3.5%NaCl溶液中的腐蚀疲劳断裂机理. Journal of Central South University 29:3, pages 1015-1028.
Crossref
Crossref
K. Giridharan, P. Sevvel, B. Stalin, M. Ravichandran & P. Sureshkumar. (2022) Microstructural Analysis and Mechanical Behaviour of Copper CDA 101/AISI-SAE 1010 Dissimilar Metal Welds Processed by Friction Stir Welding. Materials Research 25.
Crossref
Crossref
Amit Kumar & Vineet Kumar. (2022) A review of recent progress in the fabrication of surface composites through friction stir processing. Materials Today: Proceedings 63, pages 494-503.
Crossref
Crossref
M. Vetrivel Sezhian, K. Giridharan, D. Peter Pushpanathan, G. Chakravarthi, B. Stalin, Alagar Karthick, P. Manoj Kumar & Murugesan Bharani. (2021) Microstructural and Mechanical Behaviors of Friction Stir Welded Dissimilar AA6082-AA7075 Joints. Advances in Materials Science and Engineering 2021, pages 1-13.
Crossref
Crossref
Bhanodaya Kiran Babu Nadikudi. (2021) Effect of friction stir welding tool profiles on mechanical properties of dissimilar welded aluminum alloy plates. International Journal of Structural Integrity 12:4, pages 562-568.
Crossref
Crossref
Mansour Mardalizadeh, Mehrdad Khandaei & Mohammad Ali Safarkhanian. (2021) Floating-Bobbin-Tool Friction Stir Welding of 20-mm-Thick AA5456-H112 Plates: Microstructure and Weld Strength. Journal of Materials Engineering and Performance 30:5, pages 3284-3297.
Crossref
Crossref