https://orcid.org/0000-0002-1168-0617
Citations (20)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (13)
Mengfei Cui, Zhentai Zheng, Shuai Li, Liang Chang & Peng Du. (2024) Joining mechanism, microstructure, and mechanical properties of AZ31/6061 joint prepared by pouring fusion welding process assisted with Zn-xSn brazing filler. Journal of Adhesion Science and Technology 38:8, pages 1247-1283.
Read now
Read now
Soumya Sangita Nayak, Md Perwej Iqbal, Rahul Jain, Surjya K. Pal & Prakash Srirangam. (2024) A computationally efficient multiphysics model for friction stir welding with polygonal pin profiles. Journal of Adhesion Science and Technology 38:5, pages 654-686.
Read now
Read now
Yunqiang Zhao, Haokun Yang, Detao Cai, Aloshyn Andrii, Jiaxin Li & Xuan Chen. (2024) Hot-pressing treatment to improve the shear strength of refill friction stir spot-welded 1060 Al–carbon fiber–reinforced plastic joint. Journal of Adhesion Science and Technology 38:5, pages 704-715.
Read now
Read now
Hemendra Kumar Srivastava, V. Balasubramanian, S. Malarvizhi & A. Gourav Rao. (2023) Influence of post weld aging treatment on microstructural features and fatigue behaviour of unnotched and notched specimens of friction stir welded AA6061-T651 aluminium alloy joints under completely reversed stress cycle. Welding International 37:10, pages 579-596.
Read now
Read now
Vivek Kumar, Pradyumn Kumar Arya, I.A. Palani, Yuvraj Kumar Madhukar, Dan Sathiaraj & Vinay Kumar Patel. (2023) Microstructure and mechanical properties of dissimilar laser welding of NiTi to copper. Advances in Materials and Processing Technologies 9:4, pages 1811-1824.
Read now
Read now
C. Ramchandra Reddy, Pradyumn Kumar Arya, G Dan Sathiaraj & Vinay Kumar Patel. (2023) Experimental and numerical study on friction stir processing of Al0.3CoCrFeNi high entropy alloy. Advances in Materials and Processing Technologies 0:0, pages 1-19.
Read now
Read now
Jiafei Pu, Bondarev Sergii Grigorievicth, Hongfeng Wang, Shengrong Liu, Weiwei Song, Di Jiang, Xiaole Ge, Cao Shouzhen & Qi Dong. (2023) Analysis of Microstructure and Mechanical Properties of AZ31B Thick Plate Magnesium Alloy Stir Friction Welded Joints. Integrated Ferroelectrics 236:1, pages 70-84.
Read now
Read now
Gurel Çam, Vahid Javaheri & Akbar Heidarzadeh. (2023) Advances in FSW and FSSW of dissimilar Al-alloy plates. Journal of Adhesion Science and Technology 37:2, pages 162-194.
Read now
Read now
Muhammad Atif Saeed, Faraz Junejo & Imran Amin. Machine parameter optimization for sustainable machining of magnesium alloys: a review of current research gaps and opportunities. Advances in Materials and Processing Technologies 0:0, pages 1-47.
Read now
Read now
Junjie Zhao, Bo Zhao, Chuansong Wu & Najib Ahmad Muhammad. The effect of Sn interlayer on weld structure, intermetallic compounds, and joint properties of Al/Mg friction stir welding with ultrasonic assistance. Journal of Adhesion Science and Technology 0:0, pages 1-25.
Read now
Read now
Behzad Avishan, Mehdi Hosseinzadeh Khanmiri, Majid Charchi Aghdam & Akbar Heidarzadeh. Tailoring friction stir welding and postheat treatment of high-carbon steels to obtain nanostructured bainite. Journal of Adhesion Science and Technology 0:0, pages 1-15.
Read now
Read now
Liang Chang, Da Yu, Zhentai Zheng, Yang Zhang, Mengfei Cui & Peng Du. Study on process, microstructure and mechanical properties of 6061/AZ31 dissimilar metal joining with direct contact reaction brazing. Journal of Adhesion Science and Technology 0:0, pages 1-26.
Read now
Read now
Yibo Sun, Weibo Wang, Haiwei Long, Yuan Zhang, Jianning Zhu, Xinhua Yang & Libin Fu. Investigation on the pretreatment groove of metal surface of the aluminium alloy/polycarbonate friction stir lap welding. Journal of Adhesion Science and Technology 0:0, pages 1-12.
Read now
Read now
Articles from other publishers (7)
C. Rajendran, Tushar Sonar, Mikhail Ivanov, Jinyang Xu, R. B. Manoram, D. Selva Muthukumaran & V. Amarnath. (2023) Mathematical modeling, optimization and prediction of friction stir spot welding parameters for dissimilar joining AA2024-T6 aluminium and AZ31B magnesium alloy in lap weld configuration. International Journal on Interactive Design and Manufacturing (IJIDeM).
Crossref
Crossref
Miao Wang & Chongxu Pei. (2023) Study on stress corrosion properties of aviation aluminum alloy friction stir welded joint at the different strain rate. Journal of Physics: Conference Series 2587:1, pages 012027.
Crossref
Crossref
Guanlan Zhang, Jinqiang Gao & ChuanSong Wu. (2023) Revealing the acoustic effects on heat transfer and material flow in ultrasonic assisted friction stir welding of dissimilar Al/Mg alloys. Journal of Materials Research and Technology 26, pages 1882-1902.
Crossref
Crossref
T. V. B. Babu, M. Amala Justus Selvam & Natrayan L.. (2022) Improvising of dissimilar friction stir weld strengths using biosilica nanoparticle: mechanical, fatigue and microstructure properties. Biomass Conversion and Biorefinery.
Crossref
Crossref
Pradyumn Kumar Arya, Neelesh Kumar Jain, Murugesan Jayaprakash & Vinay Kumar Patel. (2022) Microstructure, mechanical and corrosion properties of differently cooled friction stir welded joints of Al and Mg alloys. Surface Topography: Metrology and Properties 10:3, pages 035017.
Crossref
Crossref
Vivek Kumar, I. A. Palani & Yuvaraj Kumar Madhukar. 2022. Recent Advances in Materials and Modern Manufacturing. Recent Advances in Materials and Modern Manufacturing
155
163
.
Priya, Gupta Manoj Kumar & Patel Vinay Kumar. (2021) Effect of Carbonitriding on Tribomechanical and Corrosion-Resistant Properties of Friction Stir Welded Aluminium 2024 Alloy. Strojnícky časopis - Journal of Mechanical Engineering 71:2, pages 199-212.
Crossref
Crossref