Citations (46)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (3)
Sivasankara Raju, Srihari Palli, Pilla Devi Prasad, Venkata Ramana Menda & Bondala Ramakrishna. (2024) A hybrid AHP-TOPSIS, MOORA technique for multi-objective optimization of thermal, mechanical, and water absorption behavior of epoxy/hemp, pine apple, and palm fiber composites. Journal of the Chinese Institute of Engineers 47:1, pages 23-36.
Read now
Read now
Venkatesan K, Devendiran S & Murali T. (2023) A hybrid algorithm for multi-objective optimisation of parameters nanofluid in MQL-turning of Inconel X-750. Advances in Materials and Processing Technologies 9:4, pages 1652-1682.
Read now
Read now
Isa Masoumi, Kaveh Ahangari & Ali Noorzad. (2018) Integrated fuzzy decision approach for reliability improvement of dam instrumentation and monitoring. Journal of Structural Integrity and Maintenance 3:2, pages 114-125.
Read now
Read now
Articles from other publishers (43)
B. Singaravel, T. Niranjan, M. Vasu Babu & K. Nagarjuna. 2024. Sustainable Machining and Green Manufacturing. Sustainable Machining and Green Manufacturing
289
304
.
Ranjit Anil Patil, Santosh B. Rane & Samir B. Kumbhar. (2024) Optimization of a shift in the natural frequency of a nitinol-reinforced composite beam. International Journal on Interactive Design and Manufacturing (IJIDeM) 18:3, pages 1761-1775.
Crossref
Crossref
Bin Tang, Zhengyi Yang, Haobin Jiang, Ziyan Lin, Zhanxiang Xu & Zitian Hu. (2024) Stability-Considered Lane Keeping Control of Commercial Vehicles Based on Improved APF Algorithm. Chinese Journal of Mechanical Engineering 37:1.
Crossref
Crossref
Nitin Kumar Sahu, Mukesh Kumar Singh, Atul Kumar Sahu & Anoop Kumar Sahu. (2023) Employment of cylindrical electrolytic copper grade electrode under EDMed Inconel 825 super alloy: emphasis on machining behavior accompanied with surface topography for sustainability. The International Journal of Advanced Manufacturing Technology 131:5-6, pages 2207-2233.
Crossref
Crossref
BISWAJEET NAYAK & THINGUJAM JACKSON SINGH. (2023) A TAGUCHI-TOPSIS HYBRID TECHNIQUE TO ENHANCE THE FRETTING WEAR CHARACTERISTICS FOR SiC AND SILICA-ENRICHED BLA-REINFORCED AZ91D Mg ALLOY-BASED MMCs. Surface Review and Letters 31:01.
Crossref
Crossref
Rabinarayan Bag, Amlana Panda, Ashok Kumar Sahoo & Ramanuj Kumar. (2022) Machinability characteristics analysis of hard turning operation on AISI 4340 steel using physical vapor deposition multilayer coated carbide cutting tool in the dry environment. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 237:6, pages 2222-2233.
Crossref
Crossref
Mohd Bilal Naim Shaikh, Mohammed Ali, Zahid A. Khan & Mohammad Asjad. (2023) An MCDM approach for multi-response optimisation of machining parameters in turning of EN8 steel (AISI-1040) for sustainable manufacturing. International Journal on Interactive Design and Manufacturing (IJIDeM) 17:6, pages 3159-3176.
Crossref
Crossref
Nikhil J. Rathod, Manoj K. Chopra, Prem Kumar Chaurasiya, Umesh S. Vidhate & Abhishek Dasore. (2022) Optimization on the Turning Process Parameters of SS 304 Using Taguchi and TOPSIS. Annals of Data Science 10:5, pages 1405-1419.
Crossref
Crossref
Rabinarayan Bag, Amlana Panda, Ashok Kumar Sahoo & Ramanuj Kumar. (2022) Sustainable High-Speed Hard Machining of AISI 4340 Steel Under Dry Environment. Arabian Journal for Science and Engineering 48:3, pages 3073-3096.
Crossref
Crossref
Mihir Solanki, Aakarsh Jain & Purnank Bhatt. Deployment of fuzzy TOPSIS for multi-objective optimization during turning of Al - 6082. Deployment of fuzzy TOPSIS for multi-objective optimization during turning of Al - 6082.
R. Chandana & K. Saraswathamma. (2023) Impact of tool pin profiles in friction stir welding process-A review. Materials Today: Proceedings 76, pages 602-606.
Crossref
Crossref
B. Chakradhar, B. Singaravel, G. Ugrasen & A. Kiran Kumar. (2023) Prediction of cutting forces using MRA, GMDH and ANN techniques in micro end milling of titanium alloy. Materials Today: Proceedings 72, pages 1943-1949.
Crossref
Crossref
K. Anoop & Kalyan Chakraborty. 2023. Recent Trends in Product Design and Intelligent Manufacturing Systems. Recent Trends in Product Design and Intelligent Manufacturing Systems
787
795
.
Nafisa Anzum Sristi, Prianka B. Zaman & Nikhil R. Dhar. (2022) Multi-response optimization of hard turning parameters: a comparison between different hybrid Taguchi-based MCDM methods. International Journal on Interactive Design and Manufacturing (IJIDeM) 16:4, pages 1779-1795.
Crossref
Crossref
S. ARULSELVAN, D. RAVINDRAN, G. SELVAKUMAR & A. ARUL MARCEL MOSHI. (2022) STUDY ON THE INFLUENCE OF ZINC-COATED WIRE MATERIAL ON 3D PROFILE MACHINING OF INCONEL 825 ALLOY USING WEDM PROCESS. Surface Review and Letters 29:11.
Crossref
Crossref
NITIN KUMAR SAHU, MUKESH KUMAR SINGH, ATUL KUMAR SAHU & ANOOP KUMAR SAHU. (2022) SURFACE TOPOGRAPHY AND OPTIMAL MACHINING CHARACTERISTICS INVESTIGATION FOR ADVANCED ENGINEERING MATERIAL INCONEL 825 ALLOY EXPLORING STATISTICAL TGRA ACCOMPANIED WITH T-TOPSIS METHODOLOGY. Surface Review and Letters 29:11.
Crossref
Crossref
Shankha Shubhra Goswami, Dhiren Kumar Behera, Soupayan Mitra, C Ahamed Saleel, Bahaa Saleh, Abdul Razak, Abdulrajak Buradi & Abiot Ketema. (2022) Development of entropy embedded COPRAS-ARAS hybrid MCDM model for optimizing EDM parameters while machining high carbon chromium steel plate. Advances in Mechanical Engineering 14:10, pages 168781322211297.
Crossref
Crossref
Santonab Chakraborty & Shankar Chakraborty. (2022) A Scoping Review on the Applications of MCDM Techniques for Parametric Optimization of Machining Processes. Archives of Computational Methods in Engineering 29:6, pages 4165-4186.
Crossref
Crossref
Mehak Nisar & M. S. Charoo. (2021) Optimization of Fretting Wear Parameters and Effect of High Temperature on Fretting Wear Behavior of Al6061 Alloy and Al6061-SiC Composite. Silicon 14:8, pages 3949-3961.
Crossref
Crossref
Ravichandra Rangappa, G. C. Manjunath Patel, Ganesh R. Chate, Deepak Lokare, Avinash Lakshmikanthan, Khaled Giasin & Danil Yu. Pimenov. (2022) Coaxiality error analysis and optimization of cylindrical parts of CNC turning process. The International Journal of Advanced Manufacturing Technology 120:9-10, pages 6617-6634.
Crossref
Crossref
S. Devaraj, M. Ramakrishna & B. Singaravel. Design parameters of micro groove textured cutting inserts and its significance in turning process-a review. Design parameters of micro groove textured cutting inserts and its significance in turning process-a review.
T. Prabhuram, S. Prathap Singh, J. Immanuel Durairaj, D. Elilraja, M. Chrispin Das & D. Arthur Jebastine Sunderraj. (2022) Optimization of operation parameters in machining of functionally graded metal matrix composite using TOPSIS. Materials Today: Proceedings 62, pages 429-433.
Crossref
Crossref
T. Niranjan, B. Singaravel & S. Srinivasulu Raju. (2022) Optimization of hole quality parameters using TOPSIS method in drilling of GFRP composite. Materials Today: Proceedings 62, pages 2109-2114.
Crossref
Crossref
Yue-Peng Zeng, Chiang-Lung Lin, Hong-Mei Dai, Yan-Cherng Lin & Jung-Chou Hung. (2021) Multi-Performance Optimization in Electrical Discharge Machining of Al2O3 Ceramics Using Taguchi Base AHP Weighted TOPSIS Method. Processes 9:9, pages 1647.
Crossref
Crossref
S. V. Alagarsamy, P. Raveendran & M. Ravichandran. (2020) Investigation of Material Removal Rate and Tool Wear Rate in Spark Erosion Machining of Al-Fe-Si Alloy Composite Using Taguchi Coupled TOPSIS Approach. Silicon 13:8, pages 2529-2543.
Crossref
Crossref
Ramakant Rana, R. S. Walia & Qasim Murtaza. (2021) Characterization and Parametric Optimization of Performance Parameters of DLC-Coated Tungsten Carbide (WC) Tool Using TOPSIS. Coatings 11:7, pages 760.
Crossref
Crossref
Min-Chih Hsieh, Po-Yi Chiang, Yu-Chi Lee, Eric Min-Yang Wang, Wen-Chuan Kung, Ya-Tzu Hu, Ming-Shi Huang & Huei-Chi Hsieh. (2021) An Investigation of Human Errors in Medication Adverse Event Improvement Priority Using a Hybrid Approach. Healthcare 9:4, pages 442.
Crossref
Crossref
T Niranjan.B. Singaravel & S. Srinivasulu Raju. (2021) Integrated Fuzzy Criteria Evaluation with Metaheuristic Optimization for Green Supplier Selection and Order Allocation. IOP Conference Series: Materials Science and Engineering 1057:1, pages 012074.
Crossref
Crossref
Roshan Kuruvila, S Thirumalai Kumaran, M Adam Khan & M Uthayakumar. (2021) Optimization of solid particle erosion of 2205 duplex stainless steel under air jet using Taguchi method. IOP Conference Series: Materials Science and Engineering 1057:1, pages 012073.
Crossref
Crossref
B Singaravel, M Radhika, M Mohammed Asif & Kathhi Palaksha Reddy. (2021) Analysis of hole quality errors in drilling of GFRP composite. IOP Conference Series: Materials Science and Engineering 1057:1, pages 012069.
Crossref
Crossref
S. Deva Prasad, S. Vishai, P. Vishwa Sai, K. Bhargav & K. Rohith. (2021) Cylindrical grinding - experimental investigation and Taguchi study of process parameters on EN31 and mild steel. IOP Conference Series: Materials Science and Engineering 1057:1, pages 012066.
Crossref
Crossref
N Venkateshwarlu, B Singaravel, K Chandra Shekar & S Deva Prasad. (2021) Analysis and optimization of circularity error in drilling Process using statistical technique. IOP Conference Series: Materials Science and Engineering 1057:1, pages 012063.
Crossref
Crossref
Anup Kumar Jana, R Ranjith Kumar, Sarat Chandra Mohanty, K Mangapathi Rao, V Guru Shanker & A Yashwanth Reddy. (2021) Parametric Optimization of Die Sinking EDM in AISI D2 Steel considering Canola oil as Dielectric using TOPSIS and GRA. IOP Conference Series: Materials Science and Engineering 1057:1, pages 012061.
Crossref
Crossref
Rachakonda Ranjith Kumar, Anup Kumar Jana, Sarat Chandra Mohanty, K Mangapathi Rao, V. Guru Shanker & D Rohit Reddy. (2021) Optimizing process parameters of die sinking EDM in AISI D2 steel by using TOPSIS using EDM oil as dielectric. IOP Conference Series: Materials Science and Engineering 1057:1, pages 012060.
Crossref
Crossref
K MangapathiRao, D Vinaykumar, K Chandra Shekar & Rachakonda Ranjith Kumar. (2021)
Investigation and analysis of EDM process – a new approach with Al
2
O
3
nano powder mixed in sunflower oil
. IOP Conference Series: Materials Science and Engineering 1057:1, pages 012059.
Crossref
Crossref
K Amarnath, K Jayanendra Babu & M V Satish Kumar. (2021) Selection of optimal Flax Fiber Reinforced Components for Experimental Investigation by using TOPSIS method. IOP Conference Series: Materials Science and Engineering 1057:1, pages 012055.
Crossref
Crossref
Ch. Divya, L. Suvarna Raju & B. Singaravel. 2021. Recent Trends in Mechanical Engineering. Recent Trends in Mechanical Engineering
199
207
.
Muhammad Abas, Bashir Salah, Qazi Salman Khalid, Iftikhar Hussain, Abdur Rehman Babar, Rashid Nawaz, Razaullah Khan & Waqas Saleem. (2020) Experimental Investigation and Statistical Evaluation of Optimized Cutting Process Parameters and Cutting Conditions to Minimize Cutting Forces and Shape Deviations in Al6026-T9. Materials 13:19, pages 4327.
Crossref
Crossref
Ranvijay Kumar, Jasgurpreet Singh Chohan, Raman Kumar, Aniket Yadav, Piyush & Narinder Singh. (2020) Hybrid fused filament fabrication for manufacturing of Al microfilm reinforced PLA structures. Journal of the Brazilian Society of Mechanical Sciences and Engineering 42:9.
Crossref
Crossref
Milan Trifunović, Miloš Madić & Miroslav Radovanović. (2020) Pareto optimization of multi-pass turning of grey cast iron with practical constraints using a deterministic approach. The International Journal of Advanced Manufacturing Technology 110:7-8, pages 1893-1909.
Crossref
Crossref
Garima Joshi, Sukhwinder Singh & Renu Vig. (2020) Taguchi-TOPSIS based HOG parameter selection for complex background sign language recognition. Journal of Visual Communication and Image Representation 71, pages 102834.
Crossref
Crossref
Barış Şimşek, Fatma Pakdil, Yusuf Tansel İç & Ali Bilge Güvenç. (2018) Building a Graphical User Interface for Concrete Production Processes: A Combined Application of Statistical Process Control and Design of Experiment. Arabian Journal for Science and Engineering 44:5, pages 4373-4393.
Crossref
Crossref
A Muniappan, A P Jaivaakheish, V Jayakumar, A Arunagiri & R Senthilkumar. (2018) Multi objective optimization of process parameters in WEDM of aluminum hybrid composite using taguchi and topsis techniques. IOP Conference Series: Materials Science and Engineering 402, pages 012002.
Crossref
Crossref