Citations (36)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (2)
T. W. J. Kwok & D. Dye. (2023) A review of the processing, microstructure and property relationships in medium Mn steels. International Materials Reviews 68:8, pages 1098-1134.
Read now
Read now
Digvijay Singh, Atul M. Gatey, Rupesh S. Devan, Vinícius Antunes, Fernando Alvarez, Carlos A. Figueroa, Akshay A. Joshi & Santosh S. Hosmani. (2019) Surface treatment response of AISI 2205 and AISI 304L steels: SMAT and plasma-nitriding. Surface Engineering 35:3, pages 205-215.
Read now
Read now
Articles from other publishers (34)
M. Sadhasivam, S. Pavan Kumar, Mainak Saha, Chinmoy Mahata & K. G. Pradeep. (2024) Combinatorial Alloy Design: Renaissance in the Accelerated Development of High-Entropy Alloys. Transactions of the Indian National Academy of Engineering.
Crossref
Crossref
Abhinav Karanam, Arnab Sarkar, Erik Nenzen, Viraj Ashok Athavale, Mark Watson, Laura Nicole Bartlett & Lukas Bichler. (2023) Microstructure Evolution and Austenitic Grain Refinement of Ti-Modified High Mn Steels During Solution Annealing Heat Treatment. Metallurgical and Materials Transactions A 55:2, pages 389-402.
Crossref
Crossref
Saket Thapliyal, Jiahao Cheng, Jason Mayeur, Yukinori Yamamoto, Patxi Fernandez-Zelaia, Andrzej Nycz & Michael M. Kirka. (2023) Outlook on texture evolution in additively manufactured stainless steels: Prospects for hydrogen embrittlement resistance, overview of mechanical, and solidification behavior. Journal of Materials Research 39:1, pages 48-62.
Crossref
Crossref
Yiliang Tu, Chuang Chen & Enling Tang. (2024) Dynamic Constitutive Parameters Determination and Numerical Simulation Verification of HfZrTiTaNbCux High Entropy Alloy. Journal of Materials Engineering and Performance.
Crossref
Crossref
Shreevalli M．, Ran Vijay Kumar, Divakar Ramachandran, Padmaprabu C．, Karthik V．Archna Sagdeo. (2023) X-ray diffraction line profile analysis of defects in neutron-irradiated austenitic stainless steels at low displacement damage levels. Journal of Nuclear Materials 577, pages 154338.
Crossref
Crossref
Sanjeev Singh Yadav, Samir Chandra Roy & Sunil Goyal. (2022) A comprehensive review and analysis of Masing/non‐Masing behavior of materials under fatigue. Fatigue & Fracture of Engineering Materials & Structures 46:3, pages 759-783.
Crossref
Crossref
Han-Jin Kim, Min-Kyung Cho, Gyeungho Kim, Seung-Yong Lee, Min-Gu Jo, Hayoung Kim, Jin-Yoo Suh & Joonho Lee. (2022) Influence of Hydrogen Absorption on Stacking Fault of Energy of a Face-Centered Cubic High Entropy Alloy. Metals and Materials International 28:11, pages 2637-2645.
Crossref
Crossref
Z. Sangarimotlagh, B. Tolaminejad, A. Momeni & H. R. Jafarian. (2022) Deformation Behavior and Dynamic Recrystallization Mechanism(s) of AMS 5643 Stainless Steel. Metallography, Microstructure, and Analysis 11:5, pages 790-800.
Crossref
Crossref
Rashid Khan, Tasneem Pervez, Adel Alfozan, Sayyad Zahid Qamar & Sumiya Mohsin. (2022) Numerical Modeling and Simulations of Twinning-Induced Plasticity Using Crystal Plasticity Finite Element Method. Crystals 12:7, pages 930.
Crossref
Crossref
Priyanka Agrawal, Sanya Gupta, Shivakant Shukla, Saurabh S. Nene, Saket Thapliyal, Michael P. Toll & Rajiv S. Mishra. (2022) Role of Cu addition in enhancing strength-ductility synergy in transforming high entropy alloy. Materials & Design 215, pages 110487.
Crossref
Crossref
Meimei Li, Wei-Ying Chen & Xuan Zhang. (2022) Effect of heat treatment on creep behavior of 316 L stainless steel manufactured by laser powder bed fusion. Journal of Nuclear Materials 559, pages 153469.
Crossref
Crossref
U. Martin, J. Ress & D.M. Bastidas. (2022) Intergranular SCC mechanism of ultrasonic nanocrystalline surface modified AISI 304 SS in H2SO4 solution containing chloride. Electrochimica Acta 405, pages 139622.
Crossref
Crossref
Thomas Wegener, Marcel Krochmal, Torben Oevermann & Thomas Niendorf. (2021) Consequences of Deep Rolling at Elevated Temperature on Near-Surface and Fatigue Properties of High-Manganese TWIP Steel X40MnCrAl19-2. Applied Sciences 11:21, pages 10406.
Crossref
Crossref
Sharvan Kumar, Ankitendran Mishra, Sunil Mohan & Girija Shankar Mahobia. (2021) The solid particle erosion of pre oxidized high manganese nitrogen stabilized austenitic stainless steel (18Cr-21Mn-0.65N-Fe) at 400 to 700 °C. Surface Topography: Metrology and Properties 9:3, pages 035002.
Crossref
Crossref
A.K. Chandan, S. Tripathy, B. Sen, M. Ghosh & S. Ghosh Chowdhury. (2021) Temperature dependent deformation behavior and stacking fault energy of Fe40Mn40Co10Cr10 alloy. Scripta Materialia 199, pages 113891.
Crossref
Crossref
Mahmoud M. Maghawry, Mohamed K. ElfawakhryHoda El FaramwySabreen A. Abdelwahab & Khaled Abdel Wahed. (2021) Precipitation Hardening of Triplex Steel by Using Nickel Aluminum Inter-Metallic Precipitates. Solid State Phenomena 318, pages 25-37.
Crossref
Crossref
Ann-Kathrin Müller, Zhi-Kang Xu & Andreas Greiner. (2021) Preparation and Performance Assessment of Low-Pressure Affinity Membranes Based on Functionalized, Electrospun Polyacrylates for Gold Nanoparticle Filtration. ACS Applied Materials & Interfaces 13:13, pages 15659-15667.
Crossref
Crossref
Tak Min Park, Mun Sik Jeong, Chanwon Jung, Won Seok Choi, Pyuck-Pa Choi & Jeongho Han. (2021) Improved strength of a medium-Mn steel by V addition without sacrificing ductility. Materials Science and Engineering: A 802, pages 140681.
Crossref
Crossref
Dorian Hachet, Stéphane Gorsse & Stéphane Godet. (2021) Microstructure study of cold rolled Al0.32CoCrFeMnNi high-entropy alloy: Interactions between recrystallization and precipitation. Materials Science and Engineering: A 802, pages 140452.
Crossref
Crossref
Thomas Voisin, Jean-Baptiste Forien, Aurelien Perron, Sylvie Aubry, Nicolas Bertin, Amit Samanta, Alexander Baker & Y. Morris Wang. (2021) New insights on cellular structures strengthening mechanisms and thermal stability of an austenitic stainless steel fabricated by laser powder-bed-fusion. Acta Materialia 203, pages 116476.
Crossref
Crossref
Mahesh C. Somani, Matias Jaskari, Saeed Sadeghpour, Chengyang Hu, R. Devesh K. Misra, Tun Tun Nyo, Chung Yang & L. Pentti Karjalainen. (2020) Improving the yield strength of an antibacterial 304Cu austenitic stainless steel by the reversion treatment. Materials Science and Engineering: A 793, pages 139885.
Crossref
Crossref
Jairo Alberto Muñoz & Alexander Komissarov. (2020) Back stress and strength contributions evolution of a heterogeneous austenitic stainless steel obtained after one pass by equal channel angular sheet extrusion (ECASE). The International Journal of Advanced Manufacturing Technology 109:3-4, pages 607-617.
Crossref
Crossref
Sung-Il Baik & Young-Woon Kim. (2020) A transmission electron microscopy study of strain-induced secondary twin and epsilon-martensitic transformation in Fe-15Mn-2Cr-0.6C-0.06N austenitic steel. Materialia 10, pages 100677.
Crossref
Crossref
M. Souissi, M.H.F. Sluiter, T. Matsunaga, M. Tabuchi, M.J. Mills & R. Sahara. (2020) Direct observation and modeling of growth-induced stacking fault in chromium-rich γ-M23C6 carbides. Scripta Materialia 178, pages 290-294.
Crossref
Crossref
Anja WeidnerAnja Weidner. 2020. Deformation Processes in TRIP/TWIP Steels. Deformation Processes in TRIP/TWIP Steels
47
69
.
Hedayat Mohammad SoltaniMohsen Asadi AsadabadMalek Naderi. (2019) The effect of thermomechanical treatment on the microstructure and mechanical properties of high Mn–Cr austenitic steels. International Journal of Materials Research 110:10, pages 946-953.
Crossref
Crossref
Xianglong Wang, Jose Alberto Muñiz-Lerma, Mohammad Attarian Shandiz, Oscar Sanchez-Mata & Mathieu Brochu. (2019) Crystallographic-orientation-dependent tensile behaviours of stainless steel 316L fabricated by laser powder bed fusion. Materials Science and Engineering: A 766, pages 138395.
Crossref
Crossref
J.T. Benzing, A. Kwiatkowski da Silva, L. Morsdorf, J. Bentley, D. Ponge, A. Dutta, J. Han, J.R. McBride, B. Van Leer, B. Gault, D. Raabe & J.E. Wittig. (2019) Multi-scale characterization of austenite reversion and martensite recovery in a cold-rolled medium-Mn steel. Acta Materialia 166, pages 512-530.
Crossref
Crossref
Xu Zhang, Dianzhong Li, Yiyi Li & Shanping Lu. (2019) The influence of niobium on the plastic deformation behaviors of 310s austenitic stainless steel weld metals at different temperatures. Materials Science and Engineering: A 743, pages 648-655.
Crossref
Crossref
Santosh Kumar, Dipti Samantaray, B. Aashranth, Nachiket Keskar, M. Arvinth Davinci, Utpal Borah, Dinesh Srivastava & A.K. Bhaduri. (2019) Dependency of rate sensitive DRX behaviour on interstitial content of a Fe-Cr-Ni-Mo alloy. Materials Science and Engineering: A 743, pages 148-158.
Crossref
Crossref
Seung-Joon Lee, Yufeng Sun & Hidetoshi Fujii. (2018) Stacking-fault energy, mechanical twinning and strain hardening of Fe-18Mn-0.6C-(0, 1.5)Al twinning-induced plasticity steels during friction stir welding. Acta Materialia 148, pages 235-248.
Crossref
Crossref
Xing Li, Liqing Chen, Yang Zhao & Raja Devesh Kumar Misra. (2018) Influence of manganese content on ε-/α′-martensitic transformation and tensile properties of low-C high-Mn TRIP steels. Materials & Design 142, pages 190-202.
Crossref
Crossref
Huan Zhao, Quanming Yao, James T. Kwok & Dik Lun Lee. (2017) Collaborative Filtering with Social Local Models. Collaborative Filtering with Social Local Models.
Qilong Gu, Joshua D. Trzasko & Arindam Banerjee. (2017) Scalable Algorithms for Locally Low-Rank Matrix Modeling. Scalable Algorithms for Locally Low-Rank Matrix Modeling.