Advanced search
Publication Cover
Materials Science and Technology Volume 33, 2017 - Issue 14
Journal homepage
2,713
Views
30
CrossRef citations to date
0
Altmetric
Articles

Effects of ultrasonic impact treatment on weld microstructure, hardness, and residual stress

Chuan LiuProvincial Key Lab of Advanced Welding Technology, Jiangsu University of Science and Technology, Zhenjiang, ChinaView further author information
,
Dongjun ChenProvincial Key Lab of Advanced Welding Technology, Jiangsu University of Science and Technology, Zhenjiang, ChinaView further author information
,
Michael R. HillDepartment of Mechanical and Aerospace Engineering, University of California, Davis, CA, USACorrespondence[email protected]
ORCID Iconhttp://orcid.org/0000-0002-9168-211XView further author information
ORCID Icon,
Minh N. TranDepartment of Mechanical and Aerospace Engineering, University of California, Davis, CA, USAView further author information
&
Jiasheng ZouProvincial Key Lab of Advanced Welding Technology, Jiangsu University of Science and Technology, Zhenjiang, ChinaView further author information
Pages 1601-1609 | Received 01 Jan 2017, Accepted 21 Feb 2017, Published online: 09 Mar 2017

Citations (30)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (1)

Chuan Liu, Jiawei Yang, Qinglei Ge, Fei Gao & Jiasheng Zou. (2018) Mechanical properties improvement of thick multi-pass weld by layered ultrasonic impact treatment. Science and Technology of Welding and Joining 23:2, pages 95-104.
Read now

Articles from other publishers (29)

Xu Wei, Laiqi Zhang & Xianlong Li. (2024) Effect of in-situ ultrasonic impact treatment on residual stress of laser deposition layer. CIRP Journal of Manufacturing Science and Technology 50, pages 1-13.
Crossref
V.V. Knysh, B.N. Mordyuk, S.O. Solovei, V.V. Savitsky, O.L. Mikhodui, D.A. Lesyk & S.I. Motrunich. (2024) HFMI-induced fatigue strength improvement of S355 steel transverse non-load-carrying attachments with lack of fusion in the weld root. International Journal of Fatigue 181, pages 108147.
Crossref
V. V. Knysh, S. O. Solovei, L. M. Lobanov, O. L. Mikhodui, P. Yu. Volosevich, D. A. Lesyk, A. P. Burmak & B. N. Mordyuk. (2024) Synergetic Effects of Macro- and Microscopic Residual Stresses Induced by High-Frequency Mechanical Impact Post-weld Treatment on Fatigue Strength Enhancement of S335 Steel T-Weld. Journal of Materials Engineering and Performance.
Crossref
Sivakumar Rakesh, Srinivasan Raghuraman & Ramamoorthi Venkatraman. (2023) Investigation on post-weld heat treatment (PWHT) inputs for controlling average fusion zone hardness in fibre laser-welded modified 9Cr–1Mo steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Crossref
Shi-Wei Hua, Ming Pang, Feng-Qin Ji, Jie Chen & Guang Liu. (2023) Microstructure and tribological properties of Ti2AlC-B particle-enhanced self-lubricating coatings on Ti6Al4V by ultrasonic impact treatment and laser cladding. Materials Today Communications 34, pages 105165.
Crossref
D. A. Lesyk, B. N. Mordyuk, V. V. Dzhemelinskyi, S. M. Voloshko & A. P. Burmak. (2022) Optimization of Ultrasonic Impact Treatment for Surface Finishing and Hardening of AISI O2 Tool Steel by Experimental Design. Journal of Materials Engineering and Performance 31:10, pages 8567-8584.
Crossref
Gökçe Mehmet GENÇER, Coşkun YOLCU & Fatih KAHRAMAN. (2022) Tig Alın Kaynaklı Alüminyum Birleştirmelerin Mikroyapı ve Mekanik Özelliklerinin SKP ve T6 Isıl İşlemi Yoluyla Kaynak Sonrası Modifikasyonu Üzerine Bir AraştırmaA Survey on Post-Weld Modification of Microstructural and Mechanical Properties of GTAWed Aluminum Butt Joints Through FSP and T6 Heat Treatment. Mühendis ve Makina 63:708, pages 511-524.
Crossref
Xu Wei, Xianlong Li, Laiqi Zhang & Qinggong Lv. (2022) Effect of in-situ ultrasonic impact treatment on flow and solidification behavior of laser metal deposition: By finite element simulation. International Journal of Heat and Mass Transfer 192, pages 122914.
Crossref
Ana Marques, Ângela Cunha, Mariana Rodrigues Silva, Maria Isabel Osendi, Filipe Samuel Silva, Óscar Carvalho & Flávio Bartolomeu. (2022) Inconel 718 produced by laser powder bed fusion: an overview of the influence of processing parameters on microstructural and mechanical properties. The International Journal of Advanced Manufacturing Technology 121:9-10, pages 5651-5675.
Crossref
Alexey Panin, Andrey Dmitriev, Anton Nikonov, Olga Perevalova, Lyudmila Kazantseva, Alexander Bakulin & Svetlana Kulkova. (2022) Transformations of the Microstructure and Phase Compositions of Titanium Alloys during Ultrasonic Impact Treatment. Part II: Ti-6Al-4V Titanium Alloy. Metals 12:5, pages 732.
Crossref
Vinh Tran-The Chung, Thai Cong Nguyen, Duy Khanh Bui, Huu Loc Nguyen, Anh Van Nguyen & Thanh-Hai Nguyen. (2022) Penetration and microstructure of steel joints by ultrasonic-assisted gas metal arc welding. Japanese Journal of Applied Physics 61:4, pages 046502.
Crossref
Chuan Liu, Changhua Lin, Weihua Liu, Shuang Wang, Yuefeng Chen, Jianfei Wang & Jianxin Wang. (2021) Effects of local ultrasonic impact treatment on residual stress in an engineering-scale stainless steel pipe girth weld. International Journal of Pressure Vessels and Piping 192, pages 104420.
Crossref
Chuan Liu, Jianfei Wang, Lihui Tian, Zhenguang Liu, Jianxin Wang & Jianxun Zhang. (2021) Properties and formation mechanism of cladding layer on high-strength low-alloy steel subjected to ultrasonic impact treatment with titanium alloy pin. Surface and Coatings Technology 418, pages 127256.
Crossref
Fangzhou Yang & Bing Liu. (2021) Microstructure Evolution and Strengthening Mechanism of Galvanized Steel/Mg Alloy Joint Obtained by Ultrasonic Vibration-Assisted Welding Process. Materials 14:7, pages 1674.
Crossref
Yinbao Tian, Junqi Shen, Shengsun Hu, Jian Han, Qian Wang & Yangchuan Cai. (2021) Effects of ultrasonic peening treatment layer by layer on microstructure of components fabricated by wire and arc additive manufacturing. Materials Letters 284, pages 128917.
Crossref
Yajie Wang, Chun Yu, Hao Lu & Junmei Chen. (2020) Research status and future perspectives on ultrasonic arc welding technique. Journal of Manufacturing Processes 58, pages 936-954.
Crossref
A.V. Kolubaev, O.V. Sizova, S.V. Fortuna, A.V. Vorontsov, A.N. Ivanov & E.A. Kolubaev. (2020) Weld structure of low-carbon structural steel formed by ultrasonic-assisted laser welding. Journal of Constructional Steel Research 172, pages 106190.
Crossref
Chuan Liu, Changhua Lin, Jianfei Wang, Jianxin Wang, Lianju Yan, Yin Luo & Min Yang. (2020) Residual stress distributions in thick specimens excavated from a large circular wire+arc additive manufacturing mockup. Journal of Manufacturing Processes 56, pages 474-481.
Crossref
Chuan Liu, Jiabin Shen, Jialing Yan, Qiaoling Chu, Jianxin Wang & Yong Zhao. (2020) Experimental Investigations on Welding Stress Distribution in Thick Specimens After Postweld Heat Treatment and Ultrasonic Impact Treatment. Journal of Materials Engineering and Performance 29:3, pages 1820-1829.
Crossref
Liu, Fu, Li, He & Dong. (2019) Influence of Crack Size on Stress Evaluation of Ferromagnetic Low Alloy Steel with Metal Magnetic Memory Technology. Materials 12:24, pages 4028.
Crossref
Guoxiang Xu, Qinghu Guo, Qingxian Hu, Haichao Pan, Hongwei Qian & Baoshuai Du. (2019) Numerical and Experimental Analysis of Dissimilar Repair Welding Residual Stress in P91 Steel Considering Solid-State Phase Transformation. Journal of Materials Engineering and Performance 28:9, pages 5734-5748.
Crossref
Yi Yan, Chuan Liu, Chunjing Wang & Jiabing Shen. (2019) Mechanical Properties and Stress Variations in Multipass Welded Joint of Low-Alloy High-Strength Steel after Layer-by-Layer Ultrasonic Impact Treatment. Journal of Materials Engineering and Performance 28:5, pages 2726-2735.
Crossref
Ilesanmi Afolabi Daniyan, Khumbulani Mpofu & Adefemi Omowole Adeodu. (2018) Investigating the effect of carbon steel STKM 13a thermal and electrical properties during welding assembly of the lower brackets of a rail car. The International Journal of Advanced Manufacturing Technology 102:1-4, pages 43-53.
Crossref
Ilesanmi Afolabi Daniyan, Khumbulani Mpofu & Adefemi Omowole Adeodu. (2018) Optimization of welding parameters using Taguchi and response surface methodology for rail car bracket assembly. The International Journal of Advanced Manufacturing Technology 100:9-12, pages 2221-2228.
Crossref
I.A. Daniyan, K. Mpofu, A.O. Adeodu & O.L. Rominiyi. (2019) Investigation of Distortion, Stress and Temperature Distribution during Assembly of the Suspension System of a Rail Car. Procedia Manufacturing 38, pages 1792-1800.
Crossref
I.A. Daniyan, K. Mpofu & A.O. Adeodu. (2019) Investigating the Thermal Properties of Carbon Steel STKM13a for the Welding Assembly of Rail Car Suspension System. Procedia CIRP 81, pages 886-891.
Crossref
Qiaoling Chu, Min Zhang, Jihong Li, Ning Hu & Cheng Yan. (2018) Investigation of Microstructure and Mechanical Properties of Fe-V Dissimilar Welds. Metallurgical and Materials Transactions A 49:11, pages 5402-5410.
Crossref
Chuan Liu, Jiawei Yang, Yifeng Shi, Qiang Fu & Yong Zhao. (2018) Modelling of residual stresses in a narrow-gap welding of ultra-thick curved steel mockup. Journal of Materials Processing Technology 256, pages 239-246.
Crossref
Chuan Liu, Chunjing Wang, Xiaohua Cheng, Yi Yan, Jiawei Yang & Yuhang Guo. (2018) Experimental Investigation on the Residual Stresses in a Thick Joint with a Partial Repair Weld Using Multiple-Cut Contour Method. Materials 11:4, pages 633.
Crossref

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.