741
Views
35
CrossRef citations to date
0
Altmetric
Original Articles

Experimental Studies of the Effect of Rough Surfaces and Air Speed on Aerosol Deposition in a Test Chamber

Pages 973-982 | Published online: 30 Nov 2010

Keep up to date with the latest research on this topic with citation updates for this article.

Read on this site (3)

D. Costa, J. Malet & E. Géhin. (2022) Dry aerosol particle deposition on indoor surfaces: Review of direct measurement techniques. Aerosol Science and Technology 56:3, pages 261-280.
Read now
Mingzhou Yu, Antti Joonas Koivisto, Kaarle Hämeri & Martin Seipenbusch. (2013) Size Dependence of the Ratio of Aerosol Coagulation to Deposition Rates for Indoor Aerosols. Aerosol Science and Technology 47:4, pages 427-434.
Read now
Longwen Gong, Bin Xu & Yifang Zhu. (2009) Ultrafine Particles Deposition Inside Passenger Vehicles. Aerosol Science and Technology 43:6, pages 544-553.
Read now

Articles from other publishers (32)

Jordi Pallares & Alexandre Fabregat. (2024) Numerical simulation of the particle wall mass transfer rates on rough surfaces confining turbulent natural convection flows. International Journal of Thermal Sciences 196, pages 108685.
Crossref
Akim Lavrinenko, Ferran Gisbert, Jordi Pallares & Alexandre Fabregat. (2023) Fully-resolved numerical simulations of the turbulent flow and particle deposition in a cubical cavity with two pairs of differentially heated opposed walls at Rayleigh number 3.6 × 109. International Communications in Heat and Mass Transfer 141, pages 106564.
Crossref
Michael B. Dillon, Richard G. Sextro & W. Woody Delp. (2022) Protecting building occupants against the inhalation of outdoor-origin aerosols. Atmospheric Environment 268, pages 118773.
Crossref
Tuan V. Vu & Roy M. Harrison. 2019. Indoor Air Pollution. Indoor Air Pollution 66 96 .
Georgios F. Kylafis, Alison S. Tomlin, P. Andrew Sleigh & Alexis Vignes. (2019) Evolution of particle interactions between accidentally released aerosol particles generated from powdered engineered nanomaterials into a simulated workplace atmosphere. Journal of Aerosol Science 129, pages 98-115.
Crossref
Nualpun Jai-Ngam & Kiatfa Tangchaichit. (2018) Simulation of Airflow inside a Computer Hard Disk Drive to Develop an Impinging Air Jet Particle Detachment System for Cleaning Head Stack Assemblies. IEEE Transactions on Magnetics 54:6, pages 1-8.
Crossref
Yan Wang, Xiaowei Fan, Angui Li, Liangyue Shang & Hui Wang. (2018) Deposition of fine particles on vertical textile surfaces: A small-scale chamber study. Building and Environment 135, pages 308-317.
Crossref
Karn Vohra, Kunal Ghosh, S.N. Tripathi, I. Thangamani, P. Goyal, Anu Dutta & V. Verma. (2017) Submicron particle dynamics for different surfaces under quiescent and turbulent conditions. Atmospheric Environment 152, pages 330-344.
Crossref
J. Kalilainen, P. Rantanen, T. Lind, A. Auvinen & A. Dehbi. (2016) Experimental investigation of a turbulent particle-laden flow inside a cubical differentially heated cavity. Journal of Aerosol Science 100, pages 73-87.
Crossref
Chun Chen, Chao-Hsin Lin, Daniel Wei & Qingyan Chen. (2016) Modeling particle deposition on the surfaces around a multi-slot diffuser. Building and Environment 107, pages 79-89.
Crossref
B. E. Boor, M. P. Spilak, R. L. Corsi & A. Novoselac. (2015) Characterizing particle resuspension from mattresses: chamber study. Indoor Air 25:4, pages 441-456.
Crossref
Xi Chen & Angui Li. (2014) An experimental study on particle deposition above near-wall heat source. Building and Environment 81, pages 139-149.
Crossref
Wan-Chen Lee, Jack M. Wolfson, Paul J. Catalano, Stephen N. Rudnick & Petros Koutrakis. (2014) Size-Resolved Deposition Rates for Ultrafine and Submicrometer Particles in a Residential Housing Unit. Environmental Science & Technology 48:17, pages 10282-10290.
Crossref
Xi Chen, Angui Li & Ran Gao. (2013) Numerical investigation on particle deposition in a chamber with an attached-wall heat source. Indoor and Built Environment 23:5, pages 640-652.
Crossref
D.A. Paterson, G. Threlfall, G. Griffin, N. Burke, S.H. Huang & Y. Zhu. (2013) Tailored surface roughnesses for enhanced deposition of fine liquid droplets from a flowing gas. Chemical Engineering Research and Design 91:12, pages 2369-2376.
Crossref
Ruoyu You & Bin Zhao. (2013) A simplified method for assessing particle deposition rate in aircraft cabins. Atmospheric Environment 67, pages 80-84.
Crossref
Xi Chen, Angui Li & Ran Gao. (2012) Effects of near-wall heat source on particle deposition. Building Simulation 5:4, pages 371-382.
Crossref
A.C.K. Lai, L.T. Wong, K.W. Mui, W.Y. Chan & H.C. Yu. (2012) An experimental study of bioaerosol (1–10 μm) deposition in a ventilated chamber. Building and Environment 56, pages 118-126.
Crossref
L. Ding, J.L.S. Fung, S. Seepana & A.C.K. Lai. (2012) Numerical study on particle dispersion and deposition in a scaled ventilated chamber using a lattice Boltzmann method. Journal of Aerosol Science 47, pages 1-11.
Crossref
Chun Chen, Bin Zhao, Wanting Zhou, Xinyi Jiang & Zhongchao Tan. (2012) A methodology for predicting particle penetration factor through cracks of windows and doors for actual engineering application. Building and Environment 47, pages 339-348.
Crossref
Simon Parker, James Nally, Timothy Foat & Steve Preston. (2010) Refinement and testing of the drift-flux model for indoor aerosol dispersion and deposition modelling. Journal of Aerosol Science 41:10, pages 921-934.
Crossref
Ke Zhong, Xiufeng Yang & Yanming Kang. (2010) Effects of ventilation strategies and source locations on indoor particle deposition. Building and Environment 45:3, pages 655-662.
Crossref
De-Ling Liu. 2010. Developments in Surface Contamination and Cleaning. Developments in Surface Contamination and Cleaning 1 56 .
Tareq Hussein & Markku Kulmala. 2010. Human Exposure to Pollutants via Dermal Absorption and Inhalation. Human Exposure to Pollutants via Dermal Absorption and Inhalation 251 277 .
Tareq Hussein, Lenka Kubincová, Lucie Džumbová, Aleš Hruška, Pavla Dohányosová, Jiří Hemerka & Jiří Smolík. (2009) Deposition of aerosol particles on rough surfaces inside a test chamber. Building and Environment 44:10, pages 2056-2063.
Crossref
Tareq Hussein, Aleš Hruška, Pavla Dohányosová, Lucie Džumbová, Jiří Hemerka, Markku Kulmala & Jiří Smolík. (2009) Deposition rates on smooth surfaces and coagulation of aerosol particles inside a test chamber. Atmospheric Environment 43:4, pages 905-914.
Crossref
Miriam A. Byrne. 2009. Airborne Radioactive Contamination in Inhabited Areas. Airborne Radioactive Contamination in Inhabited Areas 55 75 .
Tareq Hussein & Markku Kulmala. (2007) Indoor Aerosol Modeling: Basic Principles and Practical Applications. Water, Air, & Soil Pollution: Focus 8:1, pages 23-34.
Crossref
Huawei Shi, Clement Kleinstreuer & Zhe Zhang. (2007) Modeling of inertial particle transport and deposition in human nasal cavities with wall roughness. Journal of Aerosol Science 38:4, pages 398-419.
Crossref
Congrong He, Lidia Morawska & Dale Gilbert. (2005) Particle deposition rates in residential houses. Atmospheric Environment 39:21, pages 3891-3899.
Crossref
M. Airaksinen, J. Kurnitski, P. Pasanen & O. Seppanen. (2004) Fungal spore transport through a building structure. Indoor Air 14:2, pages 92-104.
Crossref
A. C. K. Lai. (2002) Particle deposition indoors: a review. Indoor Air 12:4, pages 211-214.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.