Citations (40)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (4)
Steffi Höft, Sebastian Grahn, Ingmar Bialuch, Wolfgang Augustin & Stephan Scholl. (2020) Low-Fouling Heat Exchanger for Biofuel Usage in Combined Heat and Power Units. Heat Transfer Engineering 41:4, pages 311-323.
Read now
Read now
Ali Reza Razmavar & Mohammad Reza Malayeri. (2019) Mitigation of Soot Deposition on Modified Surfaces of Exhaust Gas Recirculation Coolers. Heat Transfer Engineering 40:20, pages 1680-1690.
Read now
Read now
Fadhilah Shikh Anuar, M. Reza Malayeri & Kamel Hooman. (2017) Particulate Fouling and Challenges of Metal Foam Heat Exchangers. Heat Transfer Engineering 38:7-8, pages 730-742.
Read now
Read now
M.R. Malayeri, T. Zornek, S. Balestrino, A. Warey & P.G. Szymkowicz. (2013) Deposition of Nanosized Soot Particles in Various EGR Coolers Under Thermophoretic and Isothermal Conditions. Heat Transfer Engineering 34:8-9, pages 665-673.
Read now
Read now
Articles from other publishers (36)
Oz Oren, Gordon McTaggart-Cowan & Sami Khan. (2024) Enhancing soot oxidation using microtextured surfaces. Scientific Reports 14:1.
Crossref
Crossref
Fabrizio D'Orrico, Giuseppe Cicalese, Sebastiano Breda, Stefano Fontanesi, Ivan Cozza, Sergio Tosi & Venkatesh Gopalakrishnan. Predictive 3D-CFD Model for the Analysis of the Development of Soot Deposition Layer on Sensor Surfaces. Predictive 3D-CFD Model for the Analysis of the Development of Soot Deposition Layer on Sensor Surfaces.
Yipeng Yao, Zhiqiang Han, Wei Tian, Xueshun Wu, Yi Wu, Yan Yan, Qi Xia, Jia Fang, Liping Luo & Guy De Weireld. (2023) Three condensation paths of exhaust and its five effects on exhaust gas recirculation (EGR) cooler fouling and thermal performance: A review. Case Studies in Thermal Engineering 47, pages 103099.
Crossref
Crossref
Jesús Vence, Concepción Paz, Eduardo Suárez, Adrián Cabarcos & Miguel Concheiro. (2023) Analysis of the local growth and density evolution of soot deposits generated under hydrocarbon condensation: 3D simulation and detailed experimental validation. Results in Engineering 18, pages 101166.
Crossref
Crossref
Ahmed M. Hassan, Adil Abbas Alwan & Hameed Kadhem Hamzah. (2022) Metallic foam with cross flow heat exchanger: A review of parameters, performance, and challenges. Heat Transfer 52:3, pages 2618-2650.
Crossref
Crossref
Yuanxun Ding, Tianyu Chen, Hua Tian, Gequn Shu & Hongfei Zhang. (2023) Experimental and numerical investigation of soot deposition on exhaust heat exchanger tube banks. Thermal Science and Engineering Progress 39, pages 101699.
Crossref
Crossref
Alireza Khoshnood, Mehdi Maerefat & Gholamreza Imani. (2022) Lattice Boltzmann simulation of laminar forced convection in a parallel-plate duct with evolving porous layers at the walls. International Communications in Heat and Mass Transfer 136, pages 106204.
Crossref
Crossref
Stephan Liebsch, Mirko Leesch, Philipp Zumpf, Jörg Jacob, Ronny Mehnert, Peter Martin & Max Kneisel. EGR Cooler Fouling Reduction: A New Method for Assessment in Early Engine Development Phase. EGR Cooler Fouling Reduction: A New Method for Assessment in Early Engine Development Phase.
Dominik Appel, Fabian P. Hagen, Uwe Wagner, Thomas Koch, Henning Bockhorn & Dimosthenis Trimis. (2021) Influence of Low Ambient Temperatures on the Exhaust Gas and Deposit Composition of Gasoline Engines. Journal of Energy Resources Technology 143:8.
Crossref
Crossref
Concepción Paz, Eduardo Suárez, Jesús Vence & Adrián Cabarcos. 2021. Environmental Issues and Sustainable Development. Environmental Issues and Sustainable Development.
Alireza Razmavar, M. Reza Malayeri & M.S. Abd-Elhady. (2021) Influence of secondary flow on the thermal performance of exhaust gas recirculation (EGR) coolers. International Journal of Thermal Sciences 161, pages 106720.
Crossref
Crossref
Kotaro Tanaka, Takumi Sakai, Takumi Fujino, Satoshi Sakaida, Mitsuru Konno, Koichi Kinoshita & Yoshinaka Takeda. (2020) Evaluation of Mechanism for EGR Deposit Formation Based on Spatially- and Time-Resolved Scanning-Electron-Microscope Observation. SAE International Journal of Advances and Current Practices in Mobility 3:1, pages 150-158.
Crossref
Crossref
Jose Manuel Luján, Vicente Dolz, Javier Monsalve-Serrano & Miguel Angel Bernal Maldonado. (2019) High-pressure exhaust gas recirculation line condensation model of an internal combustion diesel engine operating at cold conditions. International Journal of Engine Research 22:2, pages 407-416.
Crossref
Crossref
C. Paz, E. Suárez, J. Vence & A. Cabarcos. (2020) Fouling evolution on ribbed surfaces under EGR dry soot conditions: Experimental measurements and 3D model validation. International Journal of Thermal Sciences 151, pages 106271.
Crossref
Crossref
Huihui Zhang, Xin Jin, Sunday Segbenu Nunayon & Alvin Chi-keung Lai. (2020) Hydraulic performance and deposition enhancement of ultrafine particles for in-duct twisted tapes under stationary and rotating conditions. Applied Thermal Engineering 165, pages 114519.
Crossref
Crossref
Ali Reza Razmavar & M. Reza Malayeri. (2019) Thermal performance of a rectangular exhaust gas recirculation cooler subject to hydrocarbon and water vapor condensation. International Journal of Thermal Sciences 143, pages 1-13.
Crossref
Crossref
Satoshi Sakaida, Shogo Kimiyama, Takumi Sakai, Kotaro Tanaka, Mitsuru Konno, Koichi Kinoshita, Satoshi Kodama & Shinsuke Mori. Effect of exhaust gas composition on EGR deposit formation. Effect of exhaust gas composition on EGR deposit formation.
Shinya Furukawa, Hirotaka Suzuki, Keiko Shibata, Hiroaki Saito, Kazuya Miyashita, Yoshinori Ishii & Naoki Shimazaki. Investigation of Particulate Matter Formation in a Diesel Engine Using In-Cylinder Total Sampling and Thermal Desorption-GCMS/Carbon Analysis. Investigation of Particulate Matter Formation in a Diesel Engine Using In-Cylinder Total Sampling and Thermal Desorption-GCMS/Carbon Analysis.
Norimitsu Matsudaira, Mitsuru Iwasaki, Junichiro Hara, Tomohiko Furuhata, Tatsuya Arai, Yasuo Moriyoshi & Naohiro Hasegawa. Visualization of the Heat Transfer Surface of EGR Cooler to Examine Soot Adhesion and Abruption Phenomena. Visualization of the Heat Transfer Surface of EGR Cooler to Examine Soot Adhesion and Abruption Phenomena.
A. Al-Janabi & M.R. Malayeri. (2017) Turbulence induced structures in Exhaust Gas Recirculation coolers to enhance thermal performance. International Journal of Thermal Sciences 112, pages 118-128.
Crossref
Crossref
Xiaohua Li, Weijun Li, Yixi Cai, Yunxi Shi, Yi Zheng, Hui Xu, Xiaoyu Pu & Linbo Gu. (2017) Deposit removal in EGR cooler and effectiveness improvement by non-thermal plasma reactor with different gas sources. Applied Thermal Engineering 111, pages 694-702.
Crossref
Crossref
Ashwin A. Salvi, John Hoard, Dan Styles & Dennis Assanis. (2016) In Situ Thermophysical Properties of an Evolving Carbon Nanoparticle Based Deposit Layer Utilizing a Novel Infrared and Optical Methodology. Journal of Energy Resources Technology 138:5.
Crossref
Crossref
Kotaro Tanaka, Kazuki Hiroki, Tomoki Kikuchi, Mitsuru Konno & Mitsuharu Oguma. (2016) Investigation of Mechanism for Formation of EGR Deposit by in situ ATR-FTIR Spectrometer and SEM. SAE International Journal of Engines 9:4, pages 2242-2249.
Crossref
Crossref
A. Reza Razmavar & M. Reza Malayeri. (2016) A Simplified Model for Deposition and Removal of Soot Particles in an Exhaust Gas Recirculation Cooler. Journal of Engineering for Gas Turbines and Power 138:1.
Crossref
Crossref
F.J. Fernández, M.M. Prieto & J.M. Fernández-Díaz. (2014) Numerical calculation of the condensational growth of liquid particles in non-dilute and non-ideal media. International Journal of Heat and Mass Transfer 77, pages 1102-1114.
Crossref
Crossref
Alok Warey, Anil Singh Bika, Alberto Vassallo, Sandro Balestrino & Patrick Szymkowicz. (2014) Combination of Pre-EGR Cooler Oxidation Catalyst and Water Vapor Condensation to Mitigate Fouling. SAE International Journal of Engines 7:1, pages 21-31.
Crossref
Crossref
Michael J. Lance, John Storey, Sam Lewis & C. Scott Sluder. Analysis of Lacquer Deposits and Plugging Found in Field-Tested EGR Coolers. Analysis of Lacquer Deposits and Plugging Found in Field-Tested EGR Coolers.
Alok Warey, Anil Singh Bika, David Long, Sandro Balestrino & Patrick Szymkowicz. (2013) Influence of water vapor condensation on exhaust gas recirculation cooler fouling. International Journal of Heat and Mass Transfer 65, pages 807-816.
Crossref
Crossref
M.S. Abd-Elhady & M.R. Malayeri. (2013) Asymptotic characteristics of particulate deposit formation in exhaust gas recirculation (EGR) coolers. Applied Thermal Engineering 60:1-2, pages 96-104.
Crossref
Crossref
Ashwin A. Salvi, John Hoard, Pavan Karthik Jagarlapudi, Theera Pornphaithoonsakun, Kevin Collao, Dennis N. Assanis, Daniel J. Styles, Mehdi Abarham & Eric W. Curtis. Optical and Infrared In-Situ Measurements of EGR Cooler Fouling. Optical and Infrared In-Situ Measurements of EGR Cooler Fouling.
Michael J. Lance, John Storey, C. Scott Sluder, Harry Meyer III, Brad Watkins, Michele Kaiser & Ponnaiyan Ayyappan. Microstructural Analysis of Deposits on Heavy-Duty EGR Coolers. Microstructural Analysis of Deposits on Heavy-Duty EGR Coolers.
Alok Warey, David Long, Sandro Balestrino, Patrick Szymkowicz & Anil Singh Bika. Visualization and Analysis of Condensation in Exhaust Gas Recirculation Coolers. Visualization and Analysis of Condensation in Exhaust Gas Recirculation Coolers.
Anil Singh Bika, Alok Warey, Patrick Szymkowicz, Sandro Balestrino & David Long. An Investigation of Diesel EGR Cooler Fouling and Effectiveness Recovery. An Investigation of Diesel EGR Cooler Fouling and Effectiveness Recovery.
Bhaskar Prabhakar & André L. Boehman. (2013) Effect of Engine Operating Conditions and Coolant Temperature on the Physical and Chemical Properties of Deposits From an Automotive Exhaust Gas Recirculation Cooler. Journal of Engineering for Gas Turbines and Power 135:2.
Crossref
Crossref
Meisam Mehravaran & Giles Brereton. Thermophoretic Transport of Submicron Particles in Pulsating Surface Sublayers. Thermophoretic Transport of Submicron Particles in Pulsating Surface Sublayers.
Alireza Khoshnood, Mehdi Maerefat & Gholamreza Imani. (2022) Lattice Boltzmann Simulation of Laminar Forced Convection in a Parallel-Plate Duct with Evolving Porous Layers at the Walls. SSRN Electronic Journal.
Crossref
Crossref