Advanced search
Publication Cover
Polymer-Plastics Technology and Engineering Volume 48, 2008 - Issue 1
Submit an article Journal homepage
142
Views
15
CrossRef citations to date
0
Altmetric
Original Articles

Injection-Compression Molded Part Shrinkage Uniformity Comparison between Semicrystalline and Amorphous Plastics

Han-Xiong Huang Lab for Micro Molding and Polymer Rheology, College of Industrial Equipment and Control Engineering, South China University of Technology, Guangzhou, P.R. ChinaCorrespondence[email protected]
,
Kun Li Lab for Micro Molding and Polymer Rheology, College of Industrial Equipment and Control Engineering, South China University of Technology, Guangzhou, P.R. China
&
Sha Li Lab for Micro Molding and Polymer Rheology, College of Industrial Equipment and Control Engineering, South China University of Technology, Guangzhou, P.R. China
Pages 64-68 | Published online: 17 Dec 2008

Citations (15)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (4)

Daniele Annicchiarico & JeffreyR. Alcock. (2014) Review of Factors that Affect Shrinkage of Molded Part in Injection Molding. Materials and Manufacturing Processes 29:6, pages 662-682.
Read now
Nik Mizamzul Mehat & Shahrul Kamaruddin. (2011) Multi-Response Optimization of Injection Moulding Processing Parameters Using the Taguchi Method. Polymer-Plastics Technology and Engineering 50:15, pages 1519-1526.
Read now
Chorng-Jyh Tzeng, Yung-Kuang Yang, Ming-Hua Hsieh & Chun-Yuan Chen. (2011) Adaptive Adjustment of Injection Molding Process for Mechanical Characteristics Using the Taguchi Method and Response Surface Methodology. Polymer-Plastics Technology and Engineering 50:6, pages 552-563.
Read now
Mirigul Altan & Mehmet Emin Yurci. (2009) Optimization of Residual Stresses in the Surface Regions of Injection Moldings. Polymer-Plastics Technology and Engineering 49:1, pages 32-37.
Read now

Articles from other publishers (11)

Yun Zhang, Wenjie Yu, Junjie Liang, Jianlin Lang & Dequn Li. (2018) Three-dimensional numerical simulation for plastic injection-compression molding. Frontiers of Mechanical Engineering 13:1, pages 74-84.
Crossref
Li-Ping Wu, Wu-Li Kang, Yi Chen, Xin Zhang, Xiao-Hong Lin, Li-Ye Chen & Jing-Gang Gai. (2017) Structures and properties of low-shrinkage polypropylene composites. Journal of Applied Polymer Science 134:7.
Crossref
Seokkwan Hong, Jeongho Hwang, Jeongjin Kang & Kyunghwan Yoon. (2015) Comparison of injection molding and injection/compression molding for the replication of microstructure. Korea-Australia Rheology Journal 27:4, pages 309-317.
Crossref
Han-Xiong Huang, Jia-Dong Tian & Wei-Sheng Guan. (2014) Microcellular injection-compression molding (micm): A novel technology for effectively improving cellular structure of polystyrene foams. Polymer Engineering & Science 54:2, pages 327-335.
Crossref
Seokkwan Hong, Inki Min, Kyunghwan Yoon & Jeongjin Kang. (2014) Effects of adding injection–compression to rapid heat cycle molding on the structure of a light guide plate. Journal of Micromechanics and Microengineering 24:1, pages 015009.
Crossref
Nik Mizamzul Mehat & Shahrul Kamaruddin. (2012) Quality control and design optimisation of plastic product using Taguchi method: a comprehensive review. International Journal of Plastics Technology 16:2, pages 194-209.
Crossref
Wen-Tsann Lin, Shen-Tsu Wang, Meng-Hua Li, Yu-Sheng Cheng & An-Hua Li. (2012) Optimization of a light guide plate injection molding stability process by integrating Taguchi quality engineering and the gray sequencing method. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 226:11, pages 1937-1946.
Crossref
Wei-Sheng Guan & Han-Xiong Huang. (2012) Back melt flow in injection–compression molding: Effect on part thickness distribution. International Communications in Heat and Mass Transfer 39:6, pages 792-797.
Crossref
Nik Mizamzul Mehat & Shahrul Kamaruddin. (2011) Optimization of mechanical properties of recycled plastic products via optimal processing parameters using the Taguchi method. Journal of Materials Processing Technology 211:12, pages 1989-1994.
Crossref
S.K. Hong, I.K. Min, J.J. Kang & K.H. Yoon. (2011) Numerical Prediction of Process Window for Injection-Compression Molding of 7-inch LGP. Transactions of Materials Processing 20:1, pages 5-10.
Crossref
Can Yang, Han-Xiong Huang & Kun Li. (2010) Investigation of fiber orientation states in injection-compression molded short-fiber-reinforced thermoplastics. Polymer Composites 31:11, pages 1899-1908.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.