Citations (44)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (10)
Dhruv Rathod, Mihir Rathod, Ronak Patel, S.M. Shahabaz, S. Divakara Shetty & Nagaraja Shetty. (2021) A review on strengthening, delamination formation and suppression techniques during drilling of CFRP composites. Cogent Engineering 8:1.
Read now
Read now
Kali Dass, S. R. Chauhan & Bharti Gaur. (2017) Study on the effects of nanoparticulates of SiC, Al2O3, and ZnO on the mechanical and tribological performance of epoxy-based nanocomposites. Particulate Science and Technology 35:5, pages 589-606.
Read now
Read now
Singubiru M. Khatake, V. L. Mathe & Girish M. Joshi. (2015) Grafting of Amine-Functionalized Multiwall Carbon Nanotubes with Free Acid Anhydride in Carboxylic Acid Modified Epoxy. Polymer-Plastics Technology and Engineering 54:8, pages 851-860.
Read now
Read now
Lei Xiong, Ze-Yang Lian, Hong-Bo Liang, Xiao-Feng Li & Sheng-Mei Huang. (2013) Influence of Hyperbranched Poly(2-(2-bromopropionyloxy)ethyl acrylate)-Modified TiO2 Nanoparticles on the Properties of Epoxy Resin Nanocomposites. Polymer-Plastics Technology and Engineering 52:9, pages 900-906.
Read now
Read now
ParagA. Wasekar & ShashankT. Mhaske. (2013) Dielectric Coating of Castor-Oil-Based Polyurethane Modified with Leucoemeralidine Polyaniline. International Journal of Polymeric Materials and Polymeric Biomaterials 62:4, pages 231-235.
Read now
Read now
Junheng Zhang, Qinhua Qiu, Wei
Yeat Yek, Feidi Wang, Zhixin Jia, Baochun Guo & Demin Jia. (2012) Preparation and Application of a New Curing Agent for Epoxy Resin. International Journal of Polymeric Materials and Polymeric Biomaterials 61:7, pages 520-531.
Read now
Read now
Fabrizio Quadrini, Loredana Santo & Erica
Anna Squeo. (2012) Solid-state Foaming of Nano–Clay-Filled Thermoset Foams with Shape Memory Properties. Polymer-Plastics Technology and Engineering 51:6, pages 560-567.
Read now
Read now
Qinghong Liu, Xufeng Zhou, Xinyu Fan, Chunyang Zhu, Xiayin Yao & Zhaoping Liu. (2012) Mechanical and Thermal Properties of Epoxy Resin Nanocomposites Reinforced with Graphene Oxide. Polymer-Plastics Technology and Engineering 51:3, pages 251-256.
Read now
Read now
Mir
Mohammad Alavi Nikje, Amir
Bagheri Garmarudi, Zahra
Mazaheri Tehrani, Moslem Haghshenas & Saeed Shakhesi. (2011) Thermal and Mechanical Evaluation of Epoxy Resin Composites by Synthesis of Amine-Based Coupling Agent-Nano Silica Complex. Polymer-Plastics Technology and Engineering 50:6, pages 646-650.
Read now
Read now
S.R. Lim & W.S. Chow. (2011) Fracture Toughness Enhancement of Epoxy by Organo-Montmorillonite. Polymer-Plastics Technology and Engineering 50:2, pages 182-189.
Read now
Read now
Articles from other publishers (34)
Chunqi Zhang, Ruofeng Wei, Hangjie Mo, Yujia Zhai & Dong Sun. (2024) Deep learning-assisted 3D laser steering using an optofluidic laser scanner. Biomedical Optics Express 15:3, pages 1668.
Crossref
Crossref
Shiv Ranjan Kumar. (2023)
Comparative analysis between size and mass ratio of nano-Al
2
O
3
in the performance of dental composite and finding the optimum composition
. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Crossref
Crossref
S.M. Shahabaz, Prakhar Mehrotra, Hridayneel Kalita, Sathyashankara Sharma, Nithesh Naik, Dilifa Jossley Noronha & Nagaraja Shetty. (2023) Effect of Al2O3 and SiC Nano-Fillers on the Mechanical Properties of Carbon Fiber-Reinforced Epoxy Hybrid Composites. Journal of Composites Science 7:4, pages 133.
Crossref
Crossref
Anna Dąda, Paweł Błaut, Maciej Kuniewski & Paweł Zydroń. (2023) Analysis of Selected Dielectric Properties of Epoxy-Alumina Nanocomposites Cured at Stepwise Increasing Temperatures. Energies 16:5, pages 2091.
Crossref
Crossref
Athraa A. Ridha, Saad K. Shather & Mostafa A.Rajab. Effect of adding nanoparticles on material removal rate for composite materials in milling process. Effect of adding nanoparticles on material removal rate for composite materials in milling process.
Minjie Wu, Wenshuang Han, Chun Zhang, Shuo Zhang, Xinyang Zhang, Xinggang Chen, Kimiyoshi Naito, Xiaoyan Yu & Qingxin Zhang. (2022) Rational Design of Fluorinated Phthalonitrile/Hollow Glass Microsphere Composite with Low Dielectric Constant and Excellent Heat Resistance for Microelectronic Packaging. Nanomaterials 12:22, pages 3973.
Crossref
Crossref
Shakila Parveen Asrafali, Thirukumaran Periyasamy, Rajesh Haldhar, Santhamoorthy Madhappan & Seong-Cheol Kim. (2022) Fabrication of SiO2-reinforced polybenzoxazine composites and their thermal and dielectric properties. Journal of Polymer Research 29:5.
Crossref
Crossref
Mohsen Fallahi, Omid Moini Jazani & Payam Molla‐Abbasi. (2022) Design and characterization of high‐performance epoxy adhesive with block copolymer and alumina nanoparticles in aluminum‐aluminum bonded joints: Mechanical properties, lap shear strength, and thermal stability. Polymer Composites 43:3, pages 1637-1655.
Crossref
Crossref
V. I. Irzhak & I. E. Uflyand. (2022) Epoxy Nanocomposites with Metal-Containing Fillers: Synthesis, Structure, and Properties. Russian Journal of Applied Chemistry 95:2, pages 167-190.
Crossref
Crossref
B.R. Lokesh Yadhav, C. Chandan, T. Raghavendra, B. Suresha & H.K. Govinda Raju. (2022) Role of alumina filler on thermal properties of carbon-epoxy nanocomposites. Materials Today: Proceedings 59, pages 166-170.
Crossref
Crossref
Xia Luo, Huan Hu, Jiajun Ma, Yawen Huang & Junxiao Yang. (2020) Synthesis and characterization of dicyclic silicon‐/phosphorus‐grafted alumina and its application in improving flame retardancy of epoxy resin. Journal of Applied Polymer Science 138:7.
Crossref
Crossref
Harish Kallagunta & Jitendra S Tate. (2019) Low-velocity impact behavior of glass fiber epoxy composites modified with nanoceramic particles. Journal of Composite Materials 54:16, pages 2217-2228.
Crossref
Crossref
Rani Mankar & Wasudeo Gurnule. (2019) Synthesis, Characterization, Environmental Properties and Mechanical Studies of SBR-Nano Aluminum Oxide Composites. Current Applied Polymer Science 3:2, pages 139-153.
Crossref
Crossref
V Yamunadevi, K Palaniradja, A Thiagarajan, P Ganeshan & K Raja. (2019) Characterization and dynamic mechanical analysis of woven roven glass fiber/cerium-zirconium oxide epoxy nanocomposite materials. Materials Research Express 6:9, pages 095057.
Crossref
Crossref
Samane Maghsoudian, Ali Salimi & Mojgan Mirzataheri. (2019) The effect of nanoalumina silanisation in tetraglycidylether epoxy adhesive. International Journal of Adhesion and Adhesives 92, pages 119-124.
Crossref
Crossref
Yasin Ramazan Eker, Muciz Özcan, Ali Osman Özkan & Hülya Kırkıcı. (2019)
The Influence of Al
2
O
3
and TiO
2
Additives on the Electrical Resistivity of Epoxy Resin‐Based Composites at Low Temperature
. Macromolecular Materials and Engineering 304:7.
Crossref
Crossref
Bhuvaneshwari Balasubramaniam, Govindasamy Sathiyan, Gadyam S. Palani, Nagesh R. Iyer & Raju Kumar Gupta. 2006. Materials Science and Technology. Materials Science and Technology
1
20
.
Guotao Zhang, Yanguo Yin, Ting Xie, Dan Li, Ming Xu & Congmin Li. (2018) Tribological properties of the epoxy resin-based solid lubricant coating modified by Kevlar fibers. Industrial Lubrication and Tribology 70:9, pages 1706-1713.
Crossref
Crossref
Zhao Liu, Lehan Yao, Xun Pan, Qiong Liu & He Huang. (2018) A green and facile approach to the efficient surface modification of alumina nanoparticles with fatty acids. Applied Surface Science 447, pages 664-672.
Crossref
Crossref
Halil B. Kaybal, Hasan Ulus, Okan Demir, Ömer S. Şahin & Ahmet Avcı. (2018) Effects of alumina nanoparticles on dynamic impact responses of carbon fiber reinforced epoxy matrix nanocomposites. Engineering Science and Technology, an International Journal 21:3, pages 399-407.
Crossref
Crossref
Yi-Shien Liou & Shenq-Yih Luo. (2018) Fabrication of bilayer resin-bonded fixed abrasive wires using the pultrusion process. Journal of Polymer Engineering 38:2, pages 187-195.
Crossref
Crossref
Dandan Xu, Tingting Wang, Xinghao Han & Ru Qiao. (2018)
Enhanced dielectric properties of epoxy resin with high content of nano-Al
2
O
3
composites
. IOP Conference Series: Earth and Environmental Science 108, pages 022074.
Crossref
Crossref
Shadpour Mallakpour & Rozita Sadeghzadeh. (2015)
A Benign and Simple Strategy for Surface Modification of Al
2
O
3
Nanoparticles with Citric Acid and L(+)‐Ascorbic Acid and Its Application for the Preparation of Novel Poly(vinyl chloride) Nanocomposite Films
. Advances in Polymer Technology 36:4, pages 409-417.
Crossref
Crossref
Kai Wu, Chuxin Lei, Weixing Yang, Songgang Chai, Feng Chen & Qiang Fu. (2016) Surface modification of boron nitride by reduced graphene oxide for preparation of dielectric material with enhanced dielectric constant and well-suppressed dielectric loss. Composites Science and Technology 134, pages 191-200.
Crossref
Crossref
Qing Xie, Yang Wang, Xiong Liu, He Huang, Cheng Zhang & Tao Shao. (2016)
Characteristics of microsecond-pulse surface flashover on epoxy resin surfaces in SF
6
. IEEE Transactions on Dielectrics and Electrical Insulation 23:4, pages 2328-2336.
Crossref
Crossref
E. Bakhshandeh, S. Sobhani, A. Jannesari, A.S. Pakdel, M.G. Sari & M.R. Saeb. (2015) Structure-property relationship in epoxy-silica hybrid nanocomposites: The role of organic solvent in achieving silica domains. Journal of Vinyl and Additive Technology 21:4, pages 305-313.
Crossref
Crossref
G.X. Glenis, G. Papalampris, Th.G. Argyropoulos & C.T. Dervos. (2015) Dielectric spectroscopy on alumina-epoxy composites towards the quantification of filler-particulate microstructure effects. Dielectric spectroscopy on alumina-epoxy composites towards the quantification of filler-particulate microstructure effects.
Cheng Zhou, Aijuan Gu, Guozheng Liang & Yu Xia. (2015) Tough Silica-Hybridized Epoxy Resin/Anhydride System with Good Corona Resistance and Thermal Stability for Permanent Magnet Synchronous Wind-Driven Generators through Vacuum Pressure Impregnation. Industrial & Engineering Chemistry Research 54:28, pages 7102-7112.
Crossref
Crossref
Kali Dass, SR Chauhan & Bharti Gaur. (2013) Mechanical and dry sliding wear characterization of microsize silicon carbide and aluminum oxide–filled ortho cresol novalac epoxy composites. Journal of Composite Materials 48:22, pages 2747-2759.
Crossref
Crossref
R.K. Goyal & A.S. Kapadia. (2013) Study on phenyltrimethoxysilane treated nano-silica filled high performance poly(etheretherketone) nanocomposites. Composites Part B: Engineering 50, pages 135-143.
Crossref
Crossref
Xingyi Huang, Chunyi Zhi, Pingkai Jiang, Dmitri Golberg, Yoshio Bando & Toshikatsu Tanaka. (2012) Polyhedral Oligosilsesquioxane‐Modified Boron Nitride Nanotube Based Epoxy Nanocomposites: An Ideal Dielectric Material with High Thermal Conductivity. Advanced Functional Materials 23:14, pages 1824-1831.
Crossref
Crossref
Alireza Kaboorani & Bernard Riedl. (2012) Nano-aluminum oxide as a reinforcing material for thermoplastic adhesives. Journal of Industrial and Engineering Chemistry 18:3, pages 1076-1081.
Crossref
Crossref
Jong-Pil Won, Yi-Na Yoon, Byung-Tak Hong, Tei-Joon Choi & Su-Jin Lee. (2012) Durability characteristics of nano-GFRP composite reinforcing bars for concrete structures in moist and alkaline environments. Composite Structures 94:3, pages 1236-1242.
Crossref
Crossref
Apostolos Kyritsis, Georgios Vikelis, Panayiotis Maroulas, Polycarpos Pissis, Boryana Milosheva, Rumiana Kotsilkova, Antonia Toplijska, Clara Silvestre & Donatella Duraccio. (2011) Polymer dynamics in epoxy/alumina nanocomposites studied by various techniques. Journal of Applied Polymer Science 121:6, pages 3613-3627.
Crossref
Crossref