Advanced search
Publication Cover
Polymer-Plastics Technology and Engineering Volume 54, 2015 - Issue 4
Submit an article Journal homepage
449
Views
15
CrossRef citations to date
0
Altmetric
Original Articles

Thermal Characterization of Polyhydroxyalkanoates and Poly(lactic acid) Blends Obtained by Injection Molding

Nuno Calçada LoureiroFaculty of Engineering, Mechanical Engineering Department, University of Porto, Porto, Portugal;ISVOUGA – Superior Institute of Douro and Vouga, Santa Maria da Feira, PortugalCorrespondence[email protected]
,
Satyabrata GhoshIPC/I3N – Institute for Polymers and Composites, Polymer Engineering Department, University of Minho, Campus de Azurém, Guimarães, Portugal
,
Júlio C. VianaIPC/I3N – Institute for Polymers and Composites, Polymer Engineering Department, University of Minho, Campus de Azurém, Guimarães, Portugal
&
José Luis EstevesFaculty of Engineering, Mechanical Engineering Department, University of Porto, Porto, Portugal
Pages 350-356 | Published online: 23 Feb 2015

Citations (15)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (2)

Song Chen, Jian Li, Yongliang Jin, Jun Xiao, Tushar Khosla, Meng Hua, Dan Jia & Haitao Duan. (2018) Fabrication of Polyimide-Modified UHMWPE Composites and Enhancement Effect on Tribological Properties. Polymer-Plastics Technology and Engineering 57:7, pages 700-707.
Read now
Renu Jose, H. B. Ravikumar, L. M. Munirathnamma, Lity Alen Varghese & G. Unnikrishnan. (2018) Microstructural Analysis of Natural Rubber/Millable Polyurethane Blends Using Positron Annihilation Lifetime Spectroscopy. Polymer-Plastics Technology and Engineering 57:3, pages 196-205.
Read now

Articles from other publishers (13)

Alice Boarino, Justine Charmillot, Monique Bernardes Figueirêdo, Thanh T. H. Le, Nicola Carrara & Harm-Anton Klok. (2023) Ductile, High-Lignin-Content Thermoset Films and Coatings. ACS Sustainable Chemistry & Engineering 11:46, pages 16442-16452.
Crossref
Fernando Guzmán-Lagunes, Phavit Wongsirichot, James Winterburn, Carlos Guerrero Sanchez & Carmina Montiel. (2023) Polyhydroxyalkanoates Production: A Challenge for the Plastic Industry. Industrial & Engineering Chemistry Research 62:44, pages 18133-18158.
Crossref
Nazan Koca, Clizia Aversa & Massimiliano Barletta. (2023) Blown film extrusion of poly(lactic)acid/poly(3‐hydroxybutyrate‐4‐hydroxybutyrate) blends for improved toughness and processability. Polymer Engineering & Science.
Crossref
Bryan Dalton, Purabi Bhagabati, Jessica De Micco, Ramesh Babu Padamati & Kevin O’Connor. (2022) A Review on Biological Synthesis of the Biodegradable Polymers Polyhydroxyalkanoates and the Development of Multiple Applications. Catalysts 12:3, pages 319.
Crossref
Gülben Torğut & Nedim Gürler. (2021) Nanofiller reinforced biodegradable PHA/PLA composites: physico-chemical, thermal and dielectric properties. Journal of Polymer Research 28:12.
Crossref
Aophat Choonut, Poonsuk Prasertsan, Sappasith Klomklao & Kanokphorn Sangkharak. (2021) An Environmentally Friendly Process for Textile Wastewater Treatment with a Medium-Chain-Length Polyhydroxyalkanoate Film. Journal of Polymers and the Environment 29:10, pages 3335-3346.
Crossref
Aophat Choonut, Poonsuk Prasertsan, Sappasith Klomklao & Kanokphorn Sangkharak. (2020) Study on mcl-PHA Production by Novel Thermotolerant Gram-Positive Isolate. Journal of Polymers and the Environment 28:9, pages 2410-2421.
Crossref
Ziyang Chen, Zuoxian Zhao, Jianhan Hong & Zhijuan Pan. (2020) Novel bioresource‐based poly(3‐Hydroxybutyrate‐co‐4‐Hydroxybutyrate)/poly(LacticAcid) blend fibers with high strength and toughness via melt‐spinning. Journal of Applied Polymer Science 137:32, pages 48956.
Crossref
D. Tharani & Muthusamy Ananthasubramanian. 2020. Microalgae Biotechnology for Food, Health and High Value Products. Microalgae Biotechnology for Food, Health and High Value Products 373 396 .
Burçin Kaygusuz & Sezer Özerinç. (2019) Improving the ductility of polylactic acid parts produced by fused deposition modeling through polyhydroxyalkanoate additions. Journal of Applied Polymer Science 136:43, pages 48154.
Crossref
M. Barletta & M. Puopolo. (2019) Thermo-Mechanical Properties of Injection Molded Components Manufactured by Engineered Biodegradable Blends. Journal of Polymers and the Environment 27:10, pages 2105-2118.
Crossref
Obinna C. Nwinyi & Tolulope A. Owolabi. (2019) Scanning electron microscopy and Fourier transmission analysis of polyhydroxyalkanoates isolated from bacteria species from abattoir in Ota, Nigeria. Journal of King Saud University - Science 31:3, pages 285-298.
Crossref
Ganesan Sathiyanarayanan, Shashi Kant Bhatia, Hun-Suk Song, Jong-Min Jeon, Junyoung Kim, Yoo Kyung Lee, Yun-Gon Kim & Yung-Hun Yang. (2017) Production and characterization of medium-chain-length polyhydroxyalkanoate copolymer from Arctic psychrotrophic bacterium Pseudomonas sp. PAMC 28620. International Journal of Biological Macromolecules 97, pages 710-720.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.