Advanced search
Publication Cover
Tribology Transactions Volume 47, 2004 - Issue 2
Submit an article Journal homepage
1,578
Views
176
CrossRef citations to date
0
Altmetric
Original Articles

The Effect of Laser Texturing of Steel Surfaces and Speed-Load Parameters on the Transition of Lubrication Regime from Boundary to Hydrodynamic

Andriy Kovalchenko Energy Technology Division Argonne National Laboratory Argonne, Illinois, 60439
,
Oyelayo Ajayi Energy Technology Division Argonne National Laboratory Argonne, Illinois, 60439
,
Ali Erdemir Energy Technology Division Argonne National Laboratory Argonne, Illinois, 60439
,
George Fenske Energy Technology Division Argonne National Laboratory Argonne, Illinois, 60439
&
Izhak Etsion Department of Mechanical Engineering Technion Haifa, Israel, 32000
Pages 299-307 | Published online: 12 Aug 2010

Citations (176)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (9)

Archit Shrivastava, D. Ravi Kumar, G. Manikandan & Rahul K. Verma. (2023) Laser surface texturing of dies in strip drawing of DP600 steel sheet. Surface Engineering 39:7-12, pages 870-881.
Read now
Xijun Hua, Zhixiang Tian, Xuan Xie, Peiyun Zhang, Jinfeng Xu, Yihang Zhu, Hang Du & Bifeng Yin. (2020) Tribological Behavior and Abrasion Resistance Mechanism of Laser Micro-Bulge Texturing Surface under Full Oil Lubrication. Tribology Transactions 63:4, pages 726-735.
Read now
Jian Zhan & Mingjiang Yang. (2012) Investigation on Dimples Distribution Angle in Laser Texturing of Cylinder–Piston Ring System. Tribology Transactions 55:5, pages 693-697.
Read now
Tianchang Hu & Litian Hu. (2011) Tribological Properties of Lubricating Films on the Al-Si Alloy Surface via Laser Surface Texturing. Tribology Transactions 54:5, pages 800-805.
Read now
Jing Han, Liang Fang, Jiapeng Sun, Yanqing Wang, Shirong Ge & Hua Zhu. (2011) Hydrodynamic Lubrication of Surfaces with Asymmetric Microdimple. Tribology Transactions 54:4, pages 607-615.
Read now
M. Fesanghary & M.M. Khonsari. (2010) On Self-Adaptive Surface Grooves. Tribology Transactions 53:6, pages 871-880.
Read now
KennethK. Chao & CostandyS. Saba. (2008) Pretreatment of Steel Racetracks by using a Sand-Blasting Technique with a Special Emphasis on Si3N4 Powder—Part One. Tribology Transactions 52:1, pages 96-105.
Read now
U. Pettersson & S. Jacobson. (2007) Textured surfaces in sliding boundary lubricated contacts – mechanisms, possibilities and limitations. Tribology - Materials, Surfaces & Interfaces 1:4, pages 181-189.
Read now
Dooroo Kim, RobertL. Jackson & Itzhak Green. (2006) Experimental Investigation of Thermal and Hydrodynamic Effects on Radially Grooved Thrust Washer Bearings. Tribology Transactions 49:2, pages 192-201.
Read now

Articles from other publishers (167)

Na Zhang, Jian Ma, Zhentao Li, Xianghua Zhan, Qingyang Zheng, Jindong Gao & Yancong Liu. (2023) Tribological behavior of squamous textured SiC sliding against graphite under mixed lubrication. Journal of Manufacturing Processes 108, pages 639-652.
Crossref
Chansovannkumpheak Phun, Witthaya Daodon, Kamthon Septham, Peerapong Kumkhuntod, Hao Zhu & Viboon Saetang. (2023) Laser-Fabricated Micro-Dimples for Improving Frictional Property of SKH51 Tool Steel Surfaces. Lubricants 11:11, pages 456.
Crossref
Robert Mašović, Daniel Miler, Ivan Čular, Suzana Jakovljević, Mario Šercer & Dragan Žeželj. (2023) The Effect of Steel Electropolishing on the Tribological Behavior of a Steel–Bronze Pair in the Mixed and Boundary Lubrication Regimes. Lubricants 11:8, pages 325.
Crossref
Jintao Wang, Chenxi Qu, Jianwei Geng, Xiaoqiang Li & Shengguan Qu. (2023) Effect of ultrasonic nanocrystal treatment combined with nitriding process on fretting wear behavior of textured 20CrMoH steel. Surface and Coatings Technology 457, pages 129263.
Crossref
Kai Ma, Zhiwei Guo & Chengqing Yuan. (2021) Insight into friction and lubrication performances of surface-textured cylinder liners and piston rings. International Journal of Engine Research 24:2, pages 408-419.
Crossref
Qibiao Yang, Yunhan You, Bojin Cheng, Lie Chen, Jian Cheng, Deyuan Lou, Yutao Wang & Dun Liu. (2022) Wettability surface and friction characterisation of ZrO 2 ceramics by femtosecond laser texturing . Industrial Lubrication and Tribology 75:1, pages 118-125.
Crossref
Zhiqiang Wang, Rihong Ye & Jinbo Xiang. (2023) The performance of textured surface in friction reducing: A review. Tribology International 177, pages 108010.
Crossref
Wangjie Hu, Pengfei Du, Xu Qiu, Xuesen Zhao, Zhenjiang Hu, Junjie Zhang & Yingxiang Liu. (2022) Enhanced dry machinability of TC4 titanium alloy by longitudinal-bending hybrid ultrasonic vibration-assisted milling. Journal of Cleaner Production 379, pages 134866.
Crossref
Clement Tom Scaria, R. Pugazhenthi, Ajith Arul Daniel & K. Santhosh. (2022) Mechanical and Wear Studies on AA7075/Nano TiC/Graphite Hybrid Composites for Tribological Applications. Advances in Materials Science and Engineering 2022, pages 1-8.
Crossref
Tao Nie, Kun Yang, Lei Zhou, Xin Wu & Yin Wang. (2022) CFD analysis of load capacity of journal bearing with surface texture. Energy Reports 8, pages 327-334.
Crossref
Tao Nie, Kun Yang, Lei Zhou, Xin Wu & Yin Wang. (2022) Experimental study on the effect of post-injection parameters on performance of extra-high pressure common-rail diesel engine. Energy Reports 8, pages 356-363.
Crossref
Aneta Gądek-Moszczak, Norbert Radek, Izabela Pliszka, Joanna Augustyn-Nadzieja & Łukasz J. Orman. (2022) Nano X-ray Tomography Application for Quantitative Surface Layer Geometry Analysis after Laser Beam Modification. Materials 15:17, pages 5935.
Crossref
Guido Boidi, Philipp G. Grützmacher, Markus Varga, Márcio Rodrigues da Silva, Carsten Gachot, Daniele Dini, Francisco J. Profito & Izabel F. Machado. 2022. Tribology of Machine Elements - Fundamentals and Applications. Tribology of Machine Elements - Fundamentals and Applications.
Amani Khaskhoussi, Giacomo Risitano, Luigi Calabrese & Danilo D’Andrea. (2022) Investigation of the Wettability Properties of Different Textured Lead/Lead-Free Bronze Coatings. Lubricants 10:5, pages 82.
Crossref
Marjetka Conradi, Bojan Podgornik, Aleksandra Kocijan, Maja Remškar & Damjan Klobčar. (2022) Water versus Oil Lubrication of Laser-Textured Ti6Al4V Alloy upon Addition of MoS2 Nanotubes for Green Tribology. Materials 15:9, pages 2974.
Crossref
K. Gavrilov, A. Doikin & M. Izzatulloev. 2022. Proceedings of the 7th International Conference on Industrial Engineering (ICIE 2021). Proceedings of the 7th International Conference on Industrial Engineering (ICIE 2021) 851 859 .
Shengguan Qu, Jintao Wang, Xiongfeng Hu, Fuqiang Lai, Yunqing Deng & Xiaoqiang Li. (2021) Effect of ultrasonic nanocrystalline surface modification process on fretting wear behavior of laser surface textured 20CrMoH steel. Surface and Coatings Technology 427, pages 127827.
Crossref
Vimal Edachery, V. Swamybabu, H. Rajneesh & Satish V. Kailas. (2021) Friction, Scuffing and Transfer Layer Formation in Lubricated Sliding of EN31 Steel and Tungsten Carbide (WC): Surface Topography Effects. Key Engineering Materials 901, pages 182-186.
Crossref
Hongbo Zou, Shuai Yan, Tong Shen, Haoji Wang, Yining Li, Jingyue Chen, Yaqi Meng, Shichao Men, Zhongjiang Zhang, Tianyi Sui & Bin Lin. (2021) Efficiency of surface texturing in the reducing of wear for tests starting with initial point contact. Wear 482-483, pages 203957.
Crossref
G. Boidi, P. G. Grützmacher, A. Kadiric, F. J. Profito, I. F. Machado, C. Gachot & D. Dini. (2021) Fast laser surface texturing of spherical samples to improve the frictional performance of elasto-hydrodynamic lubricated contacts. Friction 9:5, pages 1227-1241.
Crossref
Yin Bifeng, Jiang Yuhao, Xu Bo, Jia Hekun & Wang Xuefeng. (2021) Study on Tribological Properties of Laser-Textured Plunger in Methanol Engine. International Journal of Automotive Technology 22:4, pages 1045-1055.
Crossref
Lorcan O’Toole, Cheng-Wei Kang & Feng-Zhou Fang. (2020) Precision micro-milling process: state of the art. Advances in Manufacturing 9:2, pages 173-205.
Crossref
Jiaxin Ye, Jiazhou Xuan, Yongliang Qiao, Yifan Zhang, Haiyang Zhang, Jimin Xu, Xiaojun Liu & Kun Liu. (2021) A Simple Analysis of Texture-Induced Friction Reduction Based on Surface Roughness Ratio. Tribology Letters 69:2.
Crossref
Wenzheng Zhai, Lichun Bai, Runhua Zhou, Xueling Fan, Guozheng Kang, Yong Liu & Kun Zhou. (2021) Recent Progress on Wear‐Resistant Materials: Designs, Properties, and Applications. Advanced Science 8:11.
Crossref
Jiang Zhao, Zhengminqing Li, Hong Zhang & Rupeng Zhu. (2021) Prediction of Contact and Lubrication Characteristics of Micro-textured Surface Under Thermal Line Contact EHL. Frontiers in Mechanical Engineering 7.
Crossref
Shelby R. Maddox, Arup Gangopadhyay, Hamed Ghaednia, Jiyu Cai, Xiaoxiao Han, Xiangbo Meng, Josue A. Goss & Min Zou. (2021) Fabrication and Testing of Bioinspired Surface Designs for Friction Reduction at the Piston Ring and Liner Interface. Journal of Tribology 143:5.
Crossref
G. Boidi, F.J. Profito, A. Kadiric, I.F. Machado & D. Dini. (2021) The use of Powder Metallurgy for promoting friction reduction under sliding-rolling lubricated conditions. Tribology International 157, pages 106892.
Crossref
Adolfo Senatore, Giacomo Risitano, Lorenzo Scappaticci & Danilo D’Andrea. (2021) Investigation of the Tribological Properties of Different Textured Lead Bronze Coatings under Severe Load Conditions. Lubricants 9:4, pages 34.
Crossref
Andreas Rosenkranz, Henara L. Costa, Mehmet Z. Baykara & Ashlie Martini. (2021) Synergetic effects of surface texturing and solid lubricants to tailor friction and wear – A review. Tribology International 155, pages 106792.
Crossref
Andreas Rosenkranz, Philipp G. Grützmacher, Kevin Murzyn, Cedric Mathieu & Frank Mücklich. (2019) Multi-scale surface patterning to tune friction under mixed lubricated conditions. Applied Nanoscience 11:3, pages 751-762.
Crossref
Yu Pang, Pingfa Feng, Jianjian Wang, Huiting Zha & Jie Xu. (2021) Performance analysis of the longitudinal-torsional ultrasonic milling of Ti-6Al-4V. The International Journal of Advanced Manufacturing Technology 113:5-6, pages 1255-1266.
Crossref
V Kashyap & P Ramkumar. (2020) Comprehensive analysis of geometrical parameters of crosshatched texture for enhanced tribological performance under biological environment. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 235:2, pages 434-452.
Crossref
Hisham Abdel-Aal. 2021. Inspiration and Design for Bio-Inspired Surfaces in Tribology. Inspiration and Design for Bio-Inspired Surfaces in Tribology 161 187 .
P. Shanmugapriya, V. Srinivasan, B. Karthikeyan & B. Asaithambi. (2020) Wear Study on SOL–GEL-Coated Ti-6Al-4V Alloy. Journal of Bio- and Tribo-Corrosion 6:4.
Crossref
Agnieszka Lenart, Pawel Pawlus, Andrzej Dzierwa, Slawomir Wos & Rafal Reizer. (2020) The Effect of Surface Texture on Lubricated Fretting. Materials 13:21, pages 4886.
Crossref
G. Boidi, I.S. Tertuliano, F.J. Profito, W. de Rossi & I.F. Machado. (2020) Effect of laser surface texturing on friction behaviour in elastohydrodynamically lubricated point contacts under different sliding-rolling conditions. Tribology International 149, pages 105613.
Crossref
Hongqin Ding, Peng Lu, Chao Zhang, Yi Zhu & Huayong Yang. (2020) Friction and Lubrication Behavior of a Selective Laser Melted Hydraulic Spool Valve Under Contaminated Conditions. Journal of Tribology 142:6.
Crossref
Keying Chen, Liangcai Zeng, Feilong Zheng, Juan Chen & Xianzhong Ding. (2020) Effects of distribution density and location of subsurface particles on elastohydrodynamic lubrication. AIP Advances 10:5.
Crossref
Ruslan Melentiev & Fengzhou Fang. (2020) Tailoring of surface topography for tribological purposes by controlled solid particle impacts. Wear 444-445, pages 203164.
Crossref
Qimin Hou, Xuefeng Yang, Jian Cheng, Shouren Wang, Derong Duan, Jupeng Xiao & Wanyang Li. (2020) Optimization of Performance Parameters and Mechanism of Bionic Texture on Friction Surface. Coatings 10:2, pages 171.
Crossref
Paul Braun & Karsten Durst. (2020) A Multiple Length-Scales Nanoimprinting Approach on Nanocrystalline and Strongly Deformed CuZn30 Alloys. Scientific Reports 10:1.
Crossref
Juan Chen, Liangcai Zeng, Qiang Wan, Keying Chen & Yan Lu. (2019) Effects of texture geometry on the tribological performance of brass with a TiN coating under lubricated rotation. AIP Advances 9:10.
Crossref
Bijani, Deladi, Rooij & Schipper. (2019) The Influence of Surface Texturing on the Frictional Behaviour in Starved Lubricated Parallel Sliding Contacts. Lubricants 7:8, pages 68.
Crossref
Koji Miyake, Takamasa Ueki, Koji Ikeda & Yasuhisa Ando. (2019) Effect of adhesion on frictional properties of nanostripe surface structures composed of Au and Fe. Japanese Journal of Applied Physics 58:SI, pages SIIC06.
Crossref
Yufu Xu, Quan Zheng, Rasha Abuflaha, Dustin Olson, Octavio Furlong, Tao You, Qiangqiang Zhang, Xianguo Hu & Wilfred T. Tysoe. (2019) Influence of dimple shape on tribofilm formation and tribological properties of textured surfaces under full and starved lubrication. Tribology International 136, pages 267-275.
Crossref
Kenneth Holmberg & Ali Erdemir. (2019) The impact of tribology on energy use and CO2 emission globally and in combustion engine and electric cars. Tribology International 135, pages 389-396.
Crossref
D. Nazeer Basha, G. Padmanabham & Ravi Bathe. (2019) Tribological Behavior of Surface Textured Gray Cast Iron at Different Texture Density by Ultrafast Laser. Materials Performance and Characterization 8:6, pages 20180092.
Crossref
Manoj D. Nikam, Dipak Shimpi, Kiran Bhole & Sachin A. Mastud. (2019) Design and Development of Surface Texture for Tribological Application. Key Engineering Materials 803, pages 55-59.
Crossref
Chao Gui & Fanming Meng. (2018) Comparative study of spherical dimple and bump effects on the tribological performances of journal bearing. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 233:1, pages 139-157.
Crossref
Jesus Resendiz, Philip Egberts & Simon S. Park. (2018) Tribological Behavior of Multi-scaled Patterned Surfaces Machined Through Inclined End Milling and Micro Shot Blasting. Tribology Letters 66:4.
Crossref
Philipp G. Grützmacher, Andreas Rosenkranz, Adam Szurdak, Florian König, Georg Jacobs, Gerhard Hirt & Frank Mücklich. (2018) From lab to application - Improved frictional performance of journal bearings induced by single- and multi-scale surface patterns. Tribology International 127, pages 500-508.
Crossref
Max Marian, Stephan Tremmel & Sandro Wartzack. (2018) Microtextured surfaces in higher loaded rolling-sliding EHL line-contacts. Tribology International 127, pages 420-432.
Crossref
Paarth Mehta, Ryan Liu, James B. Mann, Christopher Saldana & Patricia Iglesias. (2018) Effect of textured surfaces created by modulation-assisted machining on the Stribeck curve and wear properties of steel-aluminum contact. The International Journal of Advanced Manufacturing Technology 99:1-4, pages 399-409.
Crossref
Dariush Bijani, Elena Deladi, Matthijn de Rooij & Dirk Schipper. (2018) The Influence of Surface Texturing on the Film Thickness in Starved Lubricated Parallel Sliding Contacts. Lubricants 6:3, pages 61.
Crossref
Di Zhang, Li Hua Liu, Hai Liang Du & Zhi Lan Chen. (2018) Effects of surface texturing on the tribological performance of the rolling bearing system. IOP Conference Series: Materials Science and Engineering 382, pages 042010.
Crossref
G. Kibria, S. Chatterjee, I. Shivakoti, B. Doloi & B. Bhattacharyya. (2018) RSM Based Experimental Investigation and Analysis into Laser Surface Texturing on Titanium using Pulsed Nd:YAG Laser. IOP Conference Series: Materials Science and Engineering 377, pages 012203.
Crossref
N.J. Morris, H. Shahmohamadi, R. Rahmani, H. Rahnejat & C.P. Garner. (2018) Combined experimental and multiphase computational fluid dynamics analysis of surface textured journal bearings in mixed regime of lubrication. Lubrication Science 30:4, pages 161-173.
Crossref
Wieslaw Grabon, Pawel Pawlus, Slawomir Wos, Waldemar Koszela & Michal Wieczorowski. (2018) Effects of cylinder liner surface topography on friction and wear of liner-ring system at low temperature. Tribology International 121, pages 148-160.
Crossref
Sriharitha Rowthu & Patrik Hoffmann. (2018) Perfluoropolyether-Impregnated Mesoporous Alumina Composites Overcome the Dewetting–Tribological Properties Trade-Off. ACS Applied Materials & Interfaces 10:12, pages 10560-10570.
Crossref
Ping Lu, Robert J. K. Wood, Mark G. Gee, Ling Wang & Wilhelm Pfleging. (2018) A Novel Surface Texture Shape for Directional Friction Control. Tribology Letters 66:1.
Crossref
Slawomir Wos, Waldemar Koszela, Pawel Pawlus, Jolanta Drabik & Elzbieta Rogos. (2018) Effects of surface texturing and kind of lubricant on the coefficient of friction at ambient and elevated temperatures. Tribology International 117, pages 174-179.
Crossref
G. Kibria, A. Sen, H. M. Tariq Aziz, B. Doloi & B. Bhattacharyya. 2018. Precision Product-Process Design and Optimization. Precision Product-Process Design and Optimization 361 390 .
Bojan Podgornik. 2017. Friction, Lubrication, and Wear Technology. Friction, Lubrication, and Wear Technology 706 722 .
Sriharitha Rowthu, Edin E Balic & Patrik Hoffmann. (2017) Molecular dimensions and surface diffusion assisted mechanically robust slippery perfluoropolyether impregnated mesoporous alumina interfaces. Nanotechnology 28:50, pages 505605.
Crossref
Jiaxin Ye, Haiyang Zhang, Xiaojun Liu & Kun Liu. (2017) Low Wear Steel Counterface Texture Design: A Case Study Using Micro-pits Texture and Alumina–PTFE Nanocomposite. Tribology Letters 65:4.
Crossref
Andreas Rosenkranz, Saad Ahmed Khan, Adam Szurdak, Gerhard Hirt & Carsten Gachot. (2017) Wear behavior of micro-coined steel surfaces under mixed lubrication. Industrial Lubrication and Tribology 69:6, pages 1033-1039.
Crossref
G. Boidi, I. S. Tertuliano, M.F. Cano, G.A.A. Machado, R.M. Souza & I.F. Machado. Tribological Evaluation of Sintered and Conventional Gear Materials. Tribological Evaluation of Sintered and Conventional Gear Materials.
Kenneth Holmberg, Päivi Kivikytö-Reponen, Pirita Härkisaari, Kati Valtonen & Ali Erdemir. (2017) Global energy consumption due to friction and wear in the mining industry. Tribology International 115, pages 116-139.
Crossref
Ping Lu, Robert J.K. Wood, Mark G. Gee, Ling Wang & Wilhelm Pfleging. (2017) The use of anisotropic texturing for control of directional friction. Tribology International 113, pages 169-181.
Crossref
Kenneth Holmberg & Ali Erdemir. (2017) Influence of tribology on global energy consumption, costs and emissions. Friction 5:3, pages 263-284.
Crossref
K. Kadirgama, D. Ramasamy, K. Abou El-Hossein, K. C. Hwa & G. Kadirgama. (2017) Assessment of alternative methods of preparing internal combustion engine cylinder bore surfaces for frictional improvement. Journal of the Brazilian Society of Mechanical Sciences and Engineering 39:9, pages 3591-3605.
Crossref
Simon Bettscheider, Philipp Grützmacher & Andreas Rosenkranz. (2017) Low Friction and High Solid-Solid Contact Ratio—A Contradiction for Laser-Patterned Surfaces?. Lubricants 5:3, pages 35.
Crossref
Johannes Schneider, Daniel Braun & Christian Greiner. (2017) Laser Textured Surfaces for Mixed Lubrication: Influence of Aspect Ratio, Textured Area and Dimple Arrangement. Lubricants 5:3, pages 32.
Crossref
A. M. Kovalchenko, A. Erdemir, O. O. Ajayi & I. Etsion. (2017) Tribological Behavior of Oil-Lubricated Laser Textured Steel Surfaces in Conformal Flat and Non-Conformal Contacts. Materials Performance and Characterization 6:2, pages MPC20160013.
Crossref
L.R.R. da Silva & H.L. Costa. (2017) Tribological behavior of gray cast iron textured by maskless electrochemical texturing. Wear 376-377, pages 1601-1610.
Crossref
Siming Ren, Jinxia Huang, Mingjun Cui, Jibin Pu & Liping Wang. (2017) Improved adaptability of polyaryl-ether-ether-ketone with texture pattern and graphite-like carbon film for bio-tribological applications. Applied Surface Science 400, pages 24-37.
Crossref
Haifeng Zhang, Peng Zhang, Qi Sui, Kai Zhao, Hong Zhou & Luquan Ren. (2017) Influence of Multiple Bionic Unit Coupling on Sliding Wear of Laser-Processed Gray Cast Iron. Journal of Materials Engineering and Performance 26:4, pages 1614-1625.
Crossref
C. Gachot, A. Rosenkranz, S.M. Hsu & H.L. Costa. (2017) A critical assessment of surface texturing for friction and wear improvement. Wear 372-373, pages 21-41.
Crossref
Andreas Rosenkranz, Frederik Krupp, Leander Reinert, Frank Mücklich & Bernd Sauer. (2017) Tribological performance of laser-patterned chain links – Influence of pattern geometry and periodicity. Wear 370-371, pages 51-58.
Crossref
Lei Han, Yunxin Wu, Hai Gong & Wenze Shi. (2016) Effect of Surface Texturing on Stresses during Rapid Changes in Temperature. Metals 6:11, pages 290.
Crossref
Hisham A Abdel-Aal. (2016) Functional surfaces for tribological applications: inspiration and design. Surface Topography: Metrology and Properties 4:4, pages 043001.
Crossref
Dan Zheng, Zhen-bing Cai, Ming-xue Shen, Zheng-yang Li & Min-hao Zhu. (2016) Investigation of the tribology behaviour of the graphene nanosheets as oil additives on textured alloy cast iron surface. Applied Surface Science 387, pages 66-75.
Crossref
P. Sperka, I. Krupka & M. Hartl. (2016) The effect of surface grooves on film breakdowns in point contacts. Tribology International 102, pages 249-256.
Crossref
Zhuo Wang, Cheng-Wei Wang, Min Wang & Quan-Zhong Zhao. (2016) Manipulation of tribological properties of stainless steel by picosecond laser texturing and quenching. Tribology International 99, pages 14-22.
Crossref
S. Zhang, X. Zeng, D. T. A. Matthews, A. Igartua, E. Rodriguez-Vidal, J. Contreras Fortes, V. Saenz de Viteri, F. Pagano, B. Wadman, E. D. Wiklund & E. van der Heide. (2016) Selection of micro-fabrication techniques on stainless steel sheet for skin friction. Friction 4:2, pages 89-104.
Crossref
Andreas Rosenkranz, Andreas Stratmann, Carsten Gachot, Gero Burghardt, Georg Jacobs & Frank Mücklich. (2016) Improved Wear Behavior of Cylindrical Roller Thrust Bearings by Three-Beam Laser Interference . Advanced Engineering Materials 18:5, pages 854-862.
Crossref
Zhen-bing Cai, Lei Zhao, Xu Zhang, Wen Yue & Min-hao Zhu. (2016) Combined Effect of Textured Patterns and Graphene Flake Additives on Tribological Behavior under Boundary Lubrication. PLOS ONE 11:4, pages e0152143.
Crossref
Andrés F. Lasagni, Tim Kunze, Matthias Bieda, Denise Günther, Anne Gärtner, Valentin Lang, Andreas Rank & Teja Roch. Large area micro-/nano-structuring using direct laser interference patterning. Large area micro-/nano-structuring using direct laser interference patterning.
Andreas Rosenkranz, Adam Szurdak, Carsten Gachot, Gerhard Hirt & Frank Mücklich. (2016) Friction reduction under mixed and full film EHL induced by hot micro-coined surface patterns. Tribology International 95, pages 290-297.
Crossref
Daniel Gropper, Ling Wang & Terry J. Harvey. (2016) Hydrodynamic lubrication of textured surfaces: A review of modeling techniques and key findings. Tribology International 94, pages 509-529.
Crossref
Andreas Rosenkranz, Carsten Gachot, Esteban Ramos-Moore & Frank Mücklich. (2016) Laser Interference Patterning of Steel Surfaces - Influence on the Frictional Performance under Dry and Lubricated Sliding Conditions. Tribology Online 11:5, pages 575-582.
Crossref
Kosuke YasakaYoshihiko KosekiKiyoshi YoshinakaKoji Miyake. (2016) Effects of Surface Texture on Soft-Materials for Medical Applications. Tribology Online 11:2, pages 288-297.
Crossref
Khagendra Tripathi, Bhupendra Joshi, Gobinda Gyawali, Auezhan Amanov & Soo Wohn Lee. (2016) A Study on the Effect of Laser Surface Texturing on Friction and Wear Behavior of Graphite Cast Iron. Journal of Tribology 138:1.
Crossref
A. Sethuramiah & Rajesh Kumar. 2016. Modeling of Chemical Wear. Modeling of Chemical Wear 1 23 .
K.E. Trinh, A. Tsipenyuk, M. Varenberg, A. Rosenkranz, N. Souza & F. Mücklich. (2015) Wear debris and electrical resistance in textured Sn-coated Cu contacts subjected to fretting. Wear 344-345, pages 86-98.
Crossref
Y.L. Zhang, X.G. Zhang & G. Matsoukas. (2015) Numerical study of surface texturing for improving tribological properties of ultra-high molecular weight polyethylene. Biosurface and Biotribology 1:4, pages 270-277.
Crossref
Zhuo Wang, Quanzhong Zhao & Chengwei Wang. (2015) Reduction of Friction of Metals Using Laser-Induced Periodic Surface Nanostructures. Micromachines 6:11, pages 1606-1616.
Crossref
Christian Greiner, Tobias Merz, Daniel Braun, Andrea Codrignani & Franco Magagnato. (2015) Optimum dimple diameter for friction reduction with laser surface texturing: the effect of velocity gradient. Surface Topography: Metrology and Properties 3:4, pages 044001.
Crossref
Xu Feng, Jianzhong Zhou, Yufen Mei, Shu Huang, Jie Sheng & Weili Zhu. (2015) Improving tribological performance of gray cast iron by laser peening in dynamic strain aging temperature regime. Chinese Journal of Mechanical Engineering 28:5, pages 904-910.
Crossref
N. Kumar, Gomathi Natarajan, D. Dinesh Kumar, Nanda Gopala Krishna, T.R. Ravindran, S. Dash & A.K. Tyagi. (2015) Wear resistant multiphase compound of Ti(C, O, N)/a-C:H nano composite film. Thin Solid Films 590, pages 17-27.
Crossref
Andreas Rosenkranz, Steffen Jaeger, Carsten Gachot, Sabrina Vogel & Frank Mücklich. (2015) Wear Behavior of Laser-Patterned Piston Rings in Squeeze Film Dampers. Advanced Engineering Materials 17:8, pages 1208-1214.
Crossref
U. Sudeep, N. Tandon & R. K. Pandey. (2015) Performance of Lubricated Rolling/Sliding Concentrated Contacts With Surface Textures: A Review. Journal of Tribology 137:3.
Crossref
Andreas Rosenkranz, Tobias Heib, Carsten Gachot & Frank Mücklich. (2015) Oil film lifetime and wear particle analysis of laser-patterned stainless steel surfaces. Wear 334-335, pages 1-12.
Crossref
Ala Alazizi, Anthony J. Barthel, Nicholas D. Surdyka, Jiawei Luo & Seong H. Kim. (2015) Vapors in the ambient—A complication in tribological studies or an engineering solution of tribological problems?. Friction 3:2, pages 85-114.
Crossref
Zhuo Wang, Quanzhong Zhao, Chengwei Wang & Yang Zhang. (2015) Modulation of dry tribological property of stainless steel by femtosecond laser surface texturing. Applied Physics A 119:3, pages 1155-1163.
Crossref
Bolutife Olofinjana, Cinta Lorenzo-Martin, Oyelayo O. Ajayi & Ezekiel O. Ajayi. (2015) Effect of laser surface texturing (LST) on tribochemical films dynamics and friction and wear performance. Wear 332-333, pages 1225-1230.
Crossref
Xiaolei Wang, Jingqiu Wang, Bo Zhang & Wei Huang. (2014) Design principles for the area density of dimple patterns. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 229:4, pages 538-546.
Crossref
Guoxin Xie, Dan Guo & Jianbin Luo. (2015) Lubrication under charged conditions. Tribology International 84, pages 22-35.
Crossref
Y. Saito & H. Yabu. (2015) Bio-Inspired Low Frictional Surfaces Having Micro-Dimple Arrays Prepared with Honeycomb Patterned Porous Films as Wet Etching Masks. Langmuir 31:3, pages 959-963.
Crossref
Daniela G Coblas, Aurelian Fatu, Abdelghani Maoui & Mohamed Hajjam. (2014) Manufacturing textured surfaces: State of art and recent developments. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 229:1, pages 3-29.
Crossref
Wang Wenzhong, Shen Dian, Zhang Shengguang & Zhao Ziqiang. (2015) Investigation of Patterned Textures in Ball-on-Disk Lubricated Point Contacts. Journal of Tribology 137:1.
Crossref
Matthias Bieda, Cindy Schmädicke, Teja Roch & Andrés Lasagni. (2015) Ultra-Low Friction on 100Cr6-Steel Surfaces After Direct Laser Interference Patterning. Advanced Engineering Materials 17:1, pages 102-108.
Crossref
Andreas Rosenkranz, Björn Martin, Simon Bettscheider, Carsten Gachot, Herbert Kliem & Frank Mücklich. (2014) Correlation between solid–solid contact ratios and lubrication regimes measured by a refined electrical resistivity circuit. Wear 320, pages 51-61.
Crossref
Ling Wang. (2014) Use of structured surfaces for friction and wear control on bearing surfaces. Surface Topography: Metrology and Properties 2:4, pages 043001.
Crossref
Kenneth Holmberg, Peter Andersson, Nils-Olof Nylund, Kari Mäkelä & Ali Erdemir. (2014) Global energy consumption due to friction in trucks and buses. Tribology International 78, pages 94-114.
Crossref
Ravi Bathe, V. Sai Krishna, S. K. Nikumb & G. Padmanabham. (2014) Laser surface texturing of gray cast iron for improving tribological behavior. Applied Physics A 117:1, pages 117-123.
Crossref
Daniel Braun, Christian Greiner, Johannes Schneider & Peter Gumbsch. (2014) Efficiency of laser surface texturing in the reduction of friction under mixed lubrication. Tribology International 77, pages 142-147.
Crossref
Ala’ A. Al-Azizi, Osman Eryilmaz, Ali Erdemir & Seong H. Kim. (2014) Nano-texture for a wear-resistant and near-frictionless diamond-like carbon. Carbon 73, pages 403-412.
Crossref
Robert Jackson & Jiang Lei. (2014) Hydrodynamically Lubricated and Grooved Biomimetic Self-Adapting Surfaces. Journal of Functional Biomaterials 5:2, pages 78-98.
Crossref
Jian Zhan & Mingjiang Yang. (2014) Investigation on the application of YAG laser texturing technology to the cylinder wall of auto engine. Industrial Lubrication and Tribology 66:3, pages 387-392.
Crossref
Miki Nakano, Koji Miyake, Atsushi Korenaga & Yasuhisa Ando. (2014) Effect of Lubricant Additives on the Tribological Properties of Nanostripe Surfaces. Tribology Online 9:2, pages 37-44.
Crossref
. 2014. Engineering Tribology. Engineering Tribology 105 210 .
T R Thomas. (2013) Roughness and function. Surface Topography: Metrology and Properties 2:1, pages 014001.
Crossref
Ala’ A. Al-Azizi, Osman Eryilmaz, Ali Erdemir & Seong H. Kim. (2013) Effects of Nanoscale Surface Texture and Lubricant Molecular Structure on Boundary Lubrication in Liquid. Langmuir 29:44, pages 13419-13426.
Crossref
Hendra Prima Syahputra & Tae Jo Ko. (2013) Application of image processing to micro-milling process for surface texturing. International Journal of Precision Engineering and Manufacturing 14:9, pages 1507-1512.
Crossref
Kenneth Holmberg, Roope Siilasto, Tarja Laitinen, Peter Andersson & Ari Jäsberg. (2013) Global energy consumption due to friction in paper machines. Tribology International 62, pages 58-77.
Crossref
Kazuyuki Yagi & Joichi Sugimura. (2013) Balancing Wedge Action: A Contribution of Textured Surface to Hydrodynamic Pressure Generation. Tribology Letters 50:3, pages 349-364.
Crossref
Wen-zhong Wang, Zhixiang Huang, Dian Shen, Lingjia Kong & Shanshan Li. (2013) The Effect of Triangle-Shaped Surface Textures on the Performance of the Lubricated Point-Contacts. Journal of Tribology 135:2.
Crossref
Ping Guo & Kornel F. Ehmann. (2013) Development of a tertiary motion generator for elliptical vibration texturing. Precision Engineering 37:2, pages 364-371.
Crossref
Ping Guo & Kornel F. Ehmann. (2013) An analysis of the surface generation mechanics of the elliptical vibration texturing process. International Journal of Machine Tools and Manufacture 64, pages 85-95.
Crossref
Mingfeng Qiu, Adis Delic & Bart Raeymaekers. (2012) The Effect of Texture Shape on the Load-Carrying Capacity of Gas-Lubricated Parallel Slider Bearings. Tribology Letters 48:3, pages 315-327.
Crossref
Bifeng Yin, Xiaodong Li, Yonghong Fu & Wang Yun. (2012) Effect of laser textured dimples on the lubrication performance of cylinder liner in diesel engine. Lubrication Science 24:7, pages 293-312.
Crossref
W. Huang, W.B. Wu & X.L. Wang. (2012) Tribological properties of magnetic surface lubricated by ferrofluids. The European Physical Journal Applied Physics 59:3, pages 31301.
Crossref
Yuankai Zhou, Hua Zhu, Wei Tang, Chenbo Ma & Wenqian Zhang. (2012) Development of the theoretical model for the optimal design of surface texturing on cylinder liner. Tribology International 52, pages 1-6.
Crossref
B. Raillard, L. Gouton, E. Ramos-Moore, S. Grandthyll, F. Müller & F. Mücklich. (2012) Ablation effects of femtosecond laser functionalization on steel surfaces. Surface and Coatings Technology 207, pages 102-109.
Crossref
Kenneth Holmberg, Peter Andersson & Ali Erdemir. (2012) Global energy consumption due to friction in passenger cars. Tribology International 47, pages 221-234.
Crossref
Tianchang Hu & Litian Hu. (2012) The study of tribological properties of laser‐textured surface of 2024 aluminium alloy under boundary lubrication. Lubrication Science 24:2, pages 84-93.
Crossref
J. Sampedro, R. Ferre, E. Fernández, I. Pérez, B. Cárcel, T. Molina & J.A. Ramos. (2012) Surface Functionalization of AISI 316 Steel by Laser Texturing of Shaped Microcavities with Picosecond Pulses. Physics Procedia 39, pages 636-641.
Crossref
Wei Huang, Sijie Liao & Xiaolei Wang. (2012) Wettability and friction coefficient of micro-magnet arrayed surface. Applied Surface Science 258:7, pages 3062-3067.
Crossref
M. Wolski, P. Podsiadlo & G.W. Stachowiak. (2011) Effects of information loss in texture details due to the PIFS encoding on load and friction in hydrodynamic bearings. Tribology International 44:12, pages 2002-2012.
Crossref
H Yu, H Deng, W Huang & X Wang. (2011) The effect of dimple shapes on friction of parallel surfaces. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 225:8, pages 693-703.
Crossref
Andriy Kovalchenko, Oyelayo Ajayi, Ali Erdemir & George Fenske. (2011) Friction and wear behavior of laser textured surface under lubricated initial point contact. Wear 271:9-10, pages 1719-1725.
Crossref
Miki Nakano & Yasuhisa Ando. (2011) Recent studies on the application of microfabrication technologies for improving tribological properties. Lubrication Science 23:3, pages 99-117.
Crossref
K Miyake, M Nakano, A Korenaga, H Mano & Y Ando. (2010) Tribological properties of nanostripe surface structures—a design concept for improving tribological properties. Journal of Physics D: Applied Physics 43:46, pages 465302.
Crossref
Yan Qing Wang, Hai Feng Yang, Qing Gong Han, Liang Fang & Shi Rong Ge. (2010) Tribological and Lubrication Properties of Sandblast-Textured Surfaces with Varied Roughness. Advanced Materials Research 154-155, pages 1019-1022.
Crossref
D Zhu, T Nanbu, N Ren, Y Yasuda & Q J Wang. (2010) Model-based virtual surface texturing for concentrated conformal-contact lubrication. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 224:8, pages 685-696.
Crossref
Min-soo Suh, Young-hun Chae, Seock-sam Kim, Tatsuya Hinoki & Akira Kohyama. (2010) Effect of geometrical parameters in micro-grooved crosshatch pattern under lubricated sliding friction. Tribology International 43:8, pages 1508-1517.
Crossref
A. K. Rai, H. K. Trivedi, R. S. Bhattacharya, C. J. Klenke & N. H. Forster. (2010) An Approach to Evaluate the Abrasive Land Wear of High-Speed Bearings. Tribology Letters 39:2, pages 143-149.
Crossref
Robert L. Jackson. (2010) A Scale Dependent Simulation of Liquid Lubricated Textured Surfaces. Journal of Tribology 132:2.
Crossref
Liu Hongbin, Li Lun, Xue Yujun, Li JiShun & Ma Wei. 2010. Proceedings of the 6th CIRP-Sponsored International Conference on Digital Enterprise Technology. Proceedings of the 6th CIRP-Sponsored International Conference on Digital Enterprise Technology 597 606 .
Wang Yan-qing, Wu Gao-feng, Han Qing-gong, Fang Liang & Ge Shi-rong. (2009) Tribological properties of surface dimple-textured by pellet-pressing. Procedia Earth and Planetary Science 1:1, pages 1513-1518.
Crossref
Miki Nakano, Koji Miyake, Atsushi Korenaga, Shinya Sasaki & Yasuhisa Ando. (2009) Tribological Properties of Patterned NiFe-Covered Si Surfaces. Tribology Letters 35:2, pages 133-139.
Crossref
Omer Rustu Ergen, Goktan Kurnaz, Nedim Gungor Soydemir & Ozgen Akalin. (2008) Reduced Oil Consumption by Laser Surface Texturing on Cylinders. SAE International Journal of Commercial Vehicles 1:1, pages 446-453.
Crossref
Shuting Lei, Sasikumar Devarajan & Zenghu Chang. (2009) A study of micropool lubricated cutting tool in machining of mild steel. Journal of Materials Processing Technology 209:3, pages 1612-1620.
Crossref
Shotaro OZU, Takayuki TOKOROYAMA, Atsushi KORENAGA, Shinya SASAKI & Noritsugu UMEHARA. (2009) The Influence of Micro-Grooves for Friction Dependant on Sliding Velocity in Slide Bearing Under Oil Lubrication(Machine Elements and Manufacturing). Transactions of the Japan Society of Mechanical Engineers Series C TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C 75:754, pages 1866-1871.
Crossref
Toshikazu Nanbu, Ning Ren, Yoshiteru Yasuda, Dong Zhu & Q. Jane Wang. (2008) Micro-Textures in Concentrated Conformal-Contact Lubrication: Effects of Texture Bottom Shape and Surface Relative Motion. Tribology Letters 29:3, pages 241-252.
Crossref
Gustavo C. Buscaglia, Ionel Ciuperca & Mohammed Jai. (2007) On the optimization of surface textures for lubricated contacts. Journal of Mathematical Analysis and Applications 335:2, pages 1309-1327.
Crossref
Ning Ren, Toshikazu Nanbu, Yoshiteru Yasuda, Dong Zhu & Qian Wang. (2007) Micro Textures in Concentrated-Conformal-Contact Lubrication: Effect of Distribution Patterns. Tribology Letters 28:3, pages 275-285.
Crossref
Roberto Ausas, Patrick Ragot, Jorge Leiva, Mohammed Jai, Guy Bayada & Gustavo C. Buscaglia. (2007) The Impact of the Cavitation Model in the Analysis of Microtextured Lubricated Journal Bearings. Journal of Tribology 129:4, pages 868-875.
Crossref
Miki Nakano, Atsuko Korenaga, Atsushi Korenaga, Koji Miyake, Takashi Murakami, Yasuhisa Ando, Hatsuhiko Usami & Shinya Sasaki. (2007) Applying Micro-Texture to Cast Iron Surfaces to Reduce the Friction Coefficient Under Lubricated Conditions. Tribology Letters 28:2, pages 131-137.
Crossref
H.L. Costa & I.M. Hutchings. (2007) Hydrodynamic lubrication of textured steel surfaces under reciprocating sliding conditions. Tribology International 40:8, pages 1227-1238.
Crossref
M. Fowell, A. V. Olver, A. D. Gosman, H. A. Spikes & I. Pegg. (2007) Entrainment and Inlet Suction: Two Mechanisms of Hydrodynamic Lubrication in Textured Bearings. Journal of Tribology 129:2, pages 336-347.
Crossref
Zhengyang Li, Yang Mingjiang, Wenjin Liu & Minlin Zhong. (2006) Investigation on crater morphology by high repetitive rate YAG laser-induced discharge texturing. Surface and Coatings Technology 200:14-15, pages 4493-4499.
Crossref
Gustavo C. Buscaglia, Ionel Ciuperca & Mohammed Jai. (2005) The Effect of Periodic Textures on the Static Characteristics of Thrust Bearings. Journal of Tribology 127:4, pages 899-902.
Crossref
P. Brajdic-Mitidieri, A. D. Gosman, E. Ioannides & H. A. Spikes. (2005) CFD Analysis of a Low Friction Pocketed Pad Bearing. Journal of Tribology 127:4, pages 803-812.
Crossref
A. Erdemir. (2005) Review of engineered tribological interfaces for improved boundary lubrication. Tribology International 38:3, pages 249-256.
Crossref
Izhak Etsion. (2005) State of the Art in Laser Surface Texturing. Journal of Tribology 127:1, pages 248-253.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.