Advanced search
Publication Cover
Tribology Transactions Volume 48, 2005 - Issue 1
Submit an article Journal homepage
373
Views
80
CrossRef citations to date
0
Altmetric
Original Articles

Finish Machining of Nickel-Base Inconel 718 Alloy with Coated Carbide Tool under Conventional and High-Pressure Coolant Supplies

E. O. Ezugwu Machining Research Centre, Faculty of Engineering Science and the Built Environment London South Bank University, London, SE1 0AA, England
&
J. Bonney Machining Research Centre, Faculty of Engineering Science and the Built Environment London South Bank University, London, SE1 0AA, England
Pages 76-81 | Received 24 Oct 2004, Published online: 25 Mar 2008

Citations (80)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (10)

Anish Nair, Somasundaram Kumanan, Chander Prakash, Dhanesh G. Mohan, Kuldeep Kumar Saxena, Sandeep Kumar & Gaurav Kumar. (2023) Research developments and technological advancements in conventional and non-conventional machining of superalloys – a review. Journal of Adhesion Science and Technology 37:22, pages 3053-3124.
Read now
Prasad Kawade & Sanjay Bokade. (2023) Review of cooling techniques used in metal cutting processes. Advances in Materials and Processing Technologies 9:3, pages 1137-1182.
Read now
Kore Mahesh, Jibin T Philip, S N Joshi & Basil Kuriachen. (2021) Machinability of Inconel 718: A critical review on the impact of cutting temperatures. Materials and Manufacturing Processes 36:7, pages 753-791.
Read now
Thrinadh Jadam, Saurav Datta & Manoj Masanta. (2021) Influence of cutting tool material on machinability of Inconel 718 superalloy. Machining Science and Technology 25:3, pages 349-397.
Read now
Rongkai Tan, Xuesen Zhao, Shuo Zhang, Xicong Zou, Shusen Guo, Zhenjiang Hu & Tao Sun. (2019) Study on ultra-precision processing of Ti-6Al-4V with different ultrasonic vibration-assisted cutting modes. Materials and Manufacturing Processes 34:12, pages 1380-1388.
Read now
Mingyang Wu, Lubin Li, Xianli Liu, Yaonan Cheng & Yongxin Yu. (2018) Analysis and experimental study of the cutting mechanism in machined nickel-base superalloys GH4169 with PCBN tools under high pressure cooling. Integrated Ferroelectrics 189:1, pages 105-120.
Read now
A. Thakur, S. Gangopadhyay, K. P. Maity & S. K. Sahoo. (2016) Evaluation on Effectiveness of CVD and PVD Coated Tools during Dry Machining of Incoloy 825. Tribology Transactions 59:6, pages 1048-1058.
Read now
A. Mohanty, S. Gangopadhyay & A. Thakur. (2016) On Applicability of Multilayer Coated Tool in Dry Machining of Aerospace Grade Stainless Steel. Materials and Manufacturing Processes 31:7, pages 869-879.
Read now
A. Thakur, S. Gangopadhyay & A. Mohanty. (2015) Investigation on Some Machinability Aspects of Inconel 825 During Dry Turning. Materials and Manufacturing Processes 30:8, pages 1026-1034.
Read now
Salman Pervaiz, Amir Rashid, Ibrahim Deiab & Mihai Nicolescu. (2014) Influence of Tool Materials on Machinability of Titanium- and Nickel-Based Alloys: A Review. Materials and Manufacturing Processes 29:3, pages 219-252.
Read now

Articles from other publishers (70)

Xuming Zha, Hao Qin, Zhi Yuan, Linqing Xi, Tao Zhang & Feng Jiang. (2023) Effect of cutting feed rate on machining performance and surface integrity in cutting process of Ti-6Al-4V alloy. The International Journal of Advanced Manufacturing Technology.
Crossref
Gustavo Henrique Nazareno Fernandes, Lucas Melo Queiroz Barbosa, Pedro Henrique Pires França, Paulo Sérgio Martins & Álisson Rocha Machado. (2023) Towards green machining: wear analysis of a novel eco-friendly cooling strategy for Inconel 718. The International Journal of Advanced Manufacturing Technology.
Crossref
Mst Nazma Sultana & Nikhil Ranjan Dhar. (2023) Performance evaluation of high-pressure cooling by using external rotary liquid applicator in milling Ti–6Al–4V alloy. Heliyon 9:7, pages e17671.
Crossref
Ganesh S. Kadam & Raju S. Pawade. (2023) Water Vapour assisted machining of Inconel 718 incorporating through-tool cutting fluid delivery approach. International Journal on Interactive Design and Manufacturing (IJIDeM).
Crossref
Rafat Tabassum Sukonna, Prianka B. Zaman & Nikhil R. Dhar. (2022) Estimation of machining responses in hard turning under dry and HPC conditions using different AI based and statistical techniques. International Journal on Interactive Design and Manufacturing (IJIDeM) 16:4, pages 1705-1725.
Crossref
SABANA AZIM, ARUNA THAKUR & SOUMYA GANGOPADHYAY. (2022) Analysis of surface layer characteristics after machining of a Ni-based superalloy. Sādhanā 47:4.
Crossref
SARTHAK PRASAD SAHOO, KSHITIJ PANDEY & SAURAV DATTA. (2022) Performance of uncoated/coated carbide inserts during MQL (sunflower oil) assisted machining of Inconel 718 superalloy. Sādhanā 47:4.
Crossref
Uma Maheshwera Reddy Paturi, Vidhya Darshini B.N.S. Reddy. (2021) Progress of machinability on the machining of Inconel 718: A comprehensive review on the perception of cleaner machining. Cleaner Engineering and Technology 5, pages 100323.
Crossref
Antonia Splettstoesser, Daniel Schraknepper & Thomas Bergs. (2021) Influence of the frequency of pulsating high-pressure cutting fluid jets on the resulting chip length and surface finish. The International Journal of Advanced Manufacturing Technology 117:7-8, pages 2185-2196.
Crossref
Mohd Danish, Munish Kumar Gupta, Saeed Rubaiee, Anas Ahmed & Mehmet Erdi Korkmaz. (2021) Influence of hybrid Cryo-MQL lubri-cooling strategy on the machining and tribological characteristics of Inconel 718. Tribology International 163, pages 107178.
Crossref
Haithem Khochtali, Yessine Ayed, Farhat Zemzemi & Wacef Bensalem. (2021) Tool wear characteristics in rough turning of Inconel 718 with coated carbide tool under conventional and high-pressure coolant supplies. The International Journal of Advanced Manufacturing Technology 114:7-8, pages 2371-2386.
Crossref
Sanjeev Kumar & Sandeep Gandotra. (2021) Effect of cooling air on machining performance during hard turning. Materials Today: Proceedings 38, pages 2213-2216.
Crossref
Thrinadh Jadam, Deepankar Panda, Suman Chatterjee, Saurav Datta, Santosh Kumar Sahoo & Subash Chandra Mishra. 2021. Sustainable Manufacturing and Design. Sustainable Manufacturing and Design 103 132 .
Joanna Lisowicz, Witold Habrat, Krzysztof Krupa & Mateusz Fiedeń. 2021. Advances in Manufacturing Engineering and Materials II. Advances in Manufacturing Engineering and Materials II 226 235 .
M.A. Makhesana, K.M. Patel & B.K. Mawandiya. (2020) Environmentally conscious machining of Inconel 718 with solid lubricant assisted minimum quantity lubrication. Metal Powder Report.
Crossref
Zhenglong Fang & Toshiyuki Obikawa. (2020) Influence of cutting fluid flow on tool wear in high-pressure coolant turning using a novel internally cooled insert. Journal of Manufacturing Processes 56, pages 1114-1125.
Crossref
Rahul Anand, Mir Irfan Ul Haq & Ankush Raina. 2020. Nanomaterials and Environmental Biotechnology. Nanomaterials and Environmental Biotechnology 333 380 .
Djordje Cica & Davorin Kramar. (2019) Multi-objective optimization of high-pressure jet-assisted turning of Inconel 718. The International Journal of Advanced Manufacturing Technology 105:11, pages 4731-4745.
Crossref
C.J. Vishwas, M. Naik Gajanan, B. Sachin, Roy Abhinaba, N.P. Puneet, B.N. Anjan & N. Kulkarni Vinayak. (2019) Study on Surface Roughness in Minimum Quantity Lubrication Turning of Al-6082/SiC Metal Matrix Composites. Applied Mechanics and Materials 895, pages 127-133.
Crossref
Toshiyuki Obikawa, Zhenglong Fang, Wataru Matsumoto, Mamoru Hayashi, Hideaki Hattori & Chikara Morigo. (2019) Deposition of Trace Coolant Elements on Flank Face in Turning of mboxInconel 718 Under High Pressure Conditions. International Journal of Automation Technology 13:1, pages 41-48.
Crossref
B. S. Nishanth, Vinayak N. Kulkarni & V. N. Gaitonde. A review on conventional and non-conventional machining of titanium and nickel based alloys. A review on conventional and non-conventional machining of titanium and nickel based alloys.
Siddharam Mane, Jai Ramchandani, Deepak Marla & Suhas S. Joshi. (2019) Experimental Investigation of Oil Mist Assisted Cooling on Orthogonal Cutting of Ti6Al4V. Procedia Manufacturing 34, pages 369-378.
Crossref
T. Lakner, T. Bergs & B. Döbbeler. (2019) Additively manufactured milling tool with focused cutting fluid supply. Procedia CIRP 81, pages 464-469.
Crossref
Sayed E Mirmohammadsadeghi & H Amirabadi. (2017) High-pressure jet-assisted turning of AISI 304: Experimental and multi-objective optimization approach. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 232:6, pages 734-750.
Crossref
Aziz Ul Hassan Mohsan, Zhanqiang Liu, Xiaoping Ren & Wentao Liu. (2018) Influences of cutting fluid conditions and cutting parameters on surface integrity of Inconel 718 under high-pressure jet-assisted machining (HPJAM). Lubrication Science 30:6, pages 269-284.
Crossref
Mozammel Mia, Prithbey R. Dey, Mohammad S. Hossain, Md T. Arafat, Md Asaduzzaman, Md. Shoriat Ullah & S.M. Tareq Zobaer. (2018) Taguchi S/N based optimization of machining parameters for surface roughness, tool wear and material removal rate in hard turning under MQL cutting condition. Measurement 122, pages 380-391.
Crossref
Prashant Kumar Shrivastava & Arun Kumar Pandey. (2018) Parametric optimization of multiple quality characteristics in laser cutting of Inconel-718 by using hybrid approach of multiple regression analysis and genetic algorithm. Infrared Physics & Technology 91, pages 220-232.
Crossref
Fritz Klocke, Benjamin Döbbeler & Thomas Lakner. (2018) Influence of the coolant nozzle orientation and size on the tool temperature under high-pressure coolant supply using an analogy test bench. Production Engineering 12:3-4, pages 473-480.
Crossref
Yassmin Seid Ahmed & Stephen Clarence Veldhuis. (2018) Effects of High pressure coolant on machining temperature and machinability of AISI 304 stainless steel. Effects of High pressure coolant on machining temperature and machinability of AISI 304 stainless steel.
Lubin Li, Mingyang Wu, Xianli Liu, Yaonan Cheng & Yongxin Yu. (2017) Experimental study of the wear behavior of PCBN inserts during cutting of GH4169 superalloys under high-pressure cooling. The International Journal of Advanced Manufacturing Technology 95:5-8, pages 1941-1951.
Crossref
Mozammel Mia & Nikhil Ranjan Dhar. (2018) Effects of duplex jets high-pressure coolant on machining temperature and machinability of Ti-6Al-4V superalloy. Journal of Materials Processing Technology 252, pages 688-696.
Crossref
Ganesh S. Kadam & Raju S. Pawade. (2018) Chip Deformation Aspects in Relative Eco-friendly HSM of Inconel 718. Procedia Manufacturing 20, pages 35-40.
Crossref
Akhtar Khan & Kalipada Maity. (2018) Influence of cutting speed and cooling method on the machinability of commercially pure titanium (CP-Ti) grade II. Journal of Manufacturing Processes 31, pages 650-661.
Crossref
Philipp Hoier, Uta Klement, Nageswaran Tamil Alagan, Tomas Beno & Anders Wretland. (2017) Flank wear characteristics of WC-Co tools when turning Alloy 718 with high-pressure coolant supply. Journal of Manufacturing Processes 30, pages 116-123.
Crossref
P. Hoier, U. Klement, N. Tamil Alagan, T. Beno & A. Wretland. (2017) Characterization of tool wear when machining alloy 718 with high-pressure cooling using conventional and surface-modified WC–Co tools. Journal of Superhard Materials 39:3, pages 178-185.
Crossref
Ali Çelik, Melike Sert Alağaç, Servet Turan, Alpagut Kara & Ferhat Kara. (2017) Wear behavior of solid SiAlON milling tools during high speed milling of Inconel 718. Wear 378-379, pages 58-67.
Crossref
Mozammel Mia, Md Awal Khan & Nikhil Ranjan Dhar. (2016) High-pressure coolant on flank and rake surfaces of tool in turning of Ti-6Al-4V: investigations on surface roughness and tool wear. The International Journal of Advanced Manufacturing Technology 90:5-8, pages 1825-1834.
Crossref
Md Awal Khan, Mozammel Mia & Nikhil Ranjan Dhar. (2016) High-pressure coolant on flank and rake surfaces of tool in turning of Ti-6Al-4V: investigations on forces, temperature, and chips. The International Journal of Advanced Manufacturing Technology 90:5-8, pages 1977-1991.
Crossref
Safian Sharif, Ibrahim Ogu Sadiq, Mohd Azlan Suhaimi & Shayfull Zamree Abd Rahim. Overview of nanofluid application through minimum quantity lubrication (MQL) in metal cutting process. Overview of nanofluid application through minimum quantity lubrication (MQL) in metal cutting process.
A. Thakur & S. Gangopadhyay. (2016) Influence of tribological properties on the performance of uncoated, CVD and PVD coated tools in machining of Incoloy 825. Tribology International 102, pages 198-212.
Crossref
Jinkai Xu, Zhe Xu, Chuanpeng Chu, Zhichao Wang & Huadong Yu. (2016) Study on process and performance of laser heating assisted micro cutting of alumina ceramics. Study on process and performance of laser heating assisted micro cutting of alumina ceramics.
A. Thakur & S. Gangopadhyay. (2016) Dry machining of nickel-based super alloy as a sustainable alternative using TiN/TiAlN coated tool. Journal of Cleaner Production 129, pages 256-268.
Crossref
K. Venkatesan, R. Ramanujam & P. Kuppan. (2016) Parametric modeling and optimization of laser scanning parameters during laser assisted machining of Inconel 718. Optics & Laser Technology 78, pages 10-18.
Crossref
A. Thakur & S. Gangopadhyay. (2016) State-of-the-art in surface integrity in machining of nickel-based super alloys. International Journal of Machine Tools and Manufacture 100, pages 25-54.
Crossref
Ahmadreza Hosseini Tazehkandi, Mohammadreza Shabgard & Farid Pilehvarian. (2015) On the feasibility of a reduction in cutting fluid consumption via spray of biodegradable vegetable oil with compressed air in machining Inconel 706. Journal of Cleaner Production 104, pages 422-435.
Crossref
Vivek Aggarwal, Rajiv K Garg & Sehijpal Singh Khangura. (2015) Technological Innovations in Machining of Inconel 718. International Journal of Manufacturing, Materials, and Mechanical Engineering 5:2, pages 17-43.
Crossref
Rachid M'Saoubi(1)(1), Dragos Axinte(1)(1), Sein Leung Soo(2)(2), Christoph Nobel, Helmi Attia(1)(1), Gregor Kappmeyer(3)(3), Serafettin Engin(3)(3) & Wei-Ming Sim. (2015) High performance cutting of advanced aerospace alloys and composite materials. CIRP Annals 64:2, pages 557-580.
Crossref
Willey Liew Yun HsienWilley Liew Yun Hsien. 2015. Towards Green Lubrication in Machining. Towards Green Lubrication in Machining 19 31 .
Mohd Sayuti Ab Karim & Ahmed Aly Diaa Mohammed Sarhan. 2015. Transactions on Engineering Technologies. Transactions on Engineering Technologies 551 565 .
Rasool Mokhtari Homami, Alireza Fadaei Tehrani, Hamed Mirzadeh, Behrooz Movahedi & Farhad Azimifar. (2013) Optimization of turning process using artificial intelligence technology. The International Journal of Advanced Manufacturing Technology 70:5-8, pages 1205-1217.
Crossref
A. Thakur, A. Mohanty, S. Gangopadhyay & K.P. Maity. (2014) Tool Wear and Chip Characteristics during Dry Turning of Inconel 825. Procedia Materials Science 5, pages 2169-2177.
Crossref
Alexander Krämer, Fritz Klocke, Hubertus Sangermann & Dieter Lung. (2014) Influence of the lubricoolant strategy on thermo-mechanical tool load. CIRP Journal of Manufacturing Science and Technology 7:1, pages 40-47.
Crossref
Bert Lauwers, Fritz Klocke, Andreas Klink, A. Erman Tekkaya, Reimund Neugebauer & Don Mcintosh. (2014) Hybrid processes in manufacturing. CIRP Annals 63:2, pages 561-583.
Crossref
Virginia Garcí;a Navas, Iban Arriola, Oscar Gonzalo & Josu Leunda. (2013) Mechanisms involved in the improvement of Inconel 718 machinability by laser assisted machining (LAM). International Journal of Machine Tools and Manufacture 74, pages 19-28.
Crossref
Guangming Zheng, Jun Zhao, Yonghui Zhou, Anhai Li, Xiaobin Cui & Xianhua Tian. (2013) Performance of graded nano-composite ceramic tools in ultra-high-speed milling of Inconel 718. The International Journal of Advanced Manufacturing Technology 67:9-12, pages 2799-2810.
Crossref
Guangming Zheng, Jun Zhao, Anhai Li, Xiaobin Cui & Yonghui Zhou. (2013) Failure mechanisms of graded ceramic tool in ultra high speed dry milling of Inconel 718. International Journal of Precision Engineering and Manufacturing 14:6, pages 943-949.
Crossref
Luiz Eduardo de Angelo Sanchez, Geraldo L Palma, Ioan Marinescu, Delson L Modolo, Luis J Nalon & Alex E Santos. (2012) Effect of different methods of cutting fluid application on turning of a difficult-to-machine steel (SAE EV-8). Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 227:2, pages 220-234.
Crossref
Sunday Albert Lawal, Imtiaz Ahmed Choudhury & Yusoff Nukman. (2013) A critical assessment of lubrication techniques in machining processes: a case for minimum quantity lubrication using vegetable oil-based lubricant. Journal of Cleaner Production 41, pages 210-221.
Crossref
Emel Kuram, Babur Ozcelik & Erhan Demirbas. 2013. Green Manufacturing Processes and Systems. Green Manufacturing Processes and Systems 23 47 .
A. Krämer, Dieter Lung & Fritz Klocke. (2012) High Performance Cutting of Aerospace Materials. Advanced Materials Research 498, pages 127-132.
Crossref
Zydrunas Vagnorius & Knut Sørby. (2010) Effect of high-pressure cooling on life of SiAlON tools in machining of Inconel 718. The International Journal of Advanced Manufacturing Technology 54:1-4, pages 83-92.
Crossref
F Klocke, H Sangermann, A Krämer & D Lung. (2011) Influence of a High-Pressure Lubricoolant Supply on Thermo-Mechanical Tool Load and Tool Wear Behaviour in the Turning of Aerospace Materials. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 225:1, pages 52-61.
Crossref
B. Lauwers. (2011) Surface Integrity in Hybrid Machining Processes. Procedia Engineering 19, pages 241-251.
Crossref
Abhay Bhatt, Helmi Attia, R. Vargas & V. Thomson. (2010) Wear mechanisms of WC coated and uncoated tools in finish turning of Inconel 718. Tribology International 43:5-6, pages 1113-1121.
Crossref
H. Attia, S. Tavakoli, R. Vargas & V. Thomson. (2010) Laser-assisted high-speed finish turning of superalloy Inconel 718 under dry conditions. CIRP Annals 59:1, pages 83-88.
Crossref
Vishal S. Sharma, Manu Dogra & N.M. Suri. (2009) Cooling techniques for improved productivity in turning. International Journal of Machine Tools and Manufacture 49:6, pages 435-453.
Crossref
Emmanuel O. Ezugwu, John Bonney, Rosemar B. Da Silva & O. Çakir. (2007) Surface integrity of finished turned Ti–6Al–4V alloy with PCD tools using conventional and high pressure coolant supplies. International Journal of Machine Tools and Manufacture 47:6, pages 884-891.
Crossref
Y. Su, N. He, L. Li, A. Iqbal, M.H. Xiao, S. Xu & B.G. Qiu. (2007) Refrigerated cooling air cutting of difficult-to-cut materials. International Journal of Machine Tools and Manufacture 47:6, pages 927-933.
Crossref
. (2006) . Journal of the Japan Institute of Energy 85:8, pages 624-627.
Crossref
E.O. Ezugwu. (2005) Key improvements in the machining of difficult-to-cut aerospace superalloys. International Journal of Machine Tools and Manufacture 45:12-13, pages 1353-1367.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.