Ruochong Zhang, Yu Xia, Jiecong Zhang, Ying Wang, Haojie Zhang, Xiaodong Hu & Xuefeng Xu. (2023) Effects of electrostatic catalysis on the formation of chemical reaction films with charged lubricant containing sulfurized isobutylene additive. Tribology International 177, pages 108012.
Crossref
Ali Zahedi & Bahman Azarhoushang. 2022. Tribology and Fundamentals of Abrasive Machining Processes. Tribology and Fundamentals of Abrasive Machining Processes
689
719
.
G. F. Pavelko. (2021) Formation of Ferrous Didodecanethiolate in the Mechanochemical Reaction between Dodecanethiol and Metallic Iron and Iron Sulfides: Investigating the Effect of Different Additives and Solvents. Russian Journal of Physical Chemistry A 95:12, pages 2405-2409.
Crossref
Christoph Burkhart, Stefan Emrich, Michael Kopnarski & Bernd Sauer. (2020) Excessive shaft wear due to radial shaft seals in lubricated environment. Part II: Measures against excessive shaft wear. Wear 462-463, pages 203483.
Crossref
Ganlin Zheng, Tongmei Ding, Songhong Pang, Lei Zheng & Tianhui Ren. (2019) Friction-condition-dependent sulfide and sulfate evolution on dialkylpentasulfide tribofilm studied by XANES. Friction 8:5, pages 874-881.
Crossref
George E. Totten, Rajesh J. Shah & David R. ForesterWei Dai, Huaping Xiao, George E. Totten & Hong Liang. 2019. Fuels and Lubricants Handbook: Technology, Properties, Performance, and Testing, 2nd Edition. Fuels and Lubricants Handbook: Technology, Properties, Performance, and Testing, 2nd Edition
1565
1630
.
George E. Totten, Rajesh J. Shah & David R. ForesterSyed Q. A. Rizvi. 2019. Fuels and Lubricants Handbook: Technology, Properties, Performance, and Testing, 2nd Edition. Fuels and Lubricants Handbook: Technology, Properties, Performance, and Testing, 2nd Edition
351
512
.
Jonny Hansen, Marcus Björling, Ichiro Minami & Roland Larsson. (2018) Performance and mechanisms of silicate tribofilm in heavily loaded rolling/sliding non-conformal contacts. Tribology International 123, pages 130-141.
Crossref
Maria-Isabel De Barros Bouchet & Jean-Michel Martin. 2018. Advanced Analytical Methods in Tribology. Advanced Analytical Methods in Tribology
107
128
.
M. Clelia Righi. 2018. Advanced Analytical Methods in Tribology. Advanced Analytical Methods in Tribology
309
323
.
Tomohiro Takaki, Kazuhiro Yagishita, Teppei Tsujimoto & Toshiaki Wakabayashi. (2017) Influence of Organo-Sulfur Compounds with Overbased Calcium Compounds on Lubrication in Cold Forming. Lubricants 5:1, pages 8.
Crossref
M. C. Righi, S. Loehlé, M. I. De Barros Bouchet, S. Mambingo-Doumbe & J. M. Martin. (2016) A comparative study on the functionality of S- and P-based lubricant additives by combined first principles and experimental analysis. RSC Advances 6:53, pages 47753-47760.
Crossref
E. Brinksmeier, D. Meyer, A.G. Huesmann-Cordes & C. Herrmann. (2015) Metalworking fluids—Mechanisms and performance. CIRP Annals 64:2, pages 605-628.
Crossref
Gorla Geethanjali, Korlipara V. Padmaja, Arukali Sammaiah & Rachapudi B. N. Prasad. (2014) Synthesis, Characterization, and Evaluation of 10-Undecenoic Acid-Based Epithio Derivatives as Multifunctional Additives. Journal of Agricultural and Food Chemistry 62:47, pages 11505-11511.
Crossref
NWM Zulkifli, MA Kalam, HH Masjuki, KAH Al Mahmud & R Yunus. (2013) The effect of palm oil trimethylolpropane ester on extreme pressure lubrication. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 228:2, pages 160-169.
Crossref
A.G. Huesmann-Cordes, D. Meyer, E. Brinksmeier & J. Schulz. (2014) Influence of Additives in Metalworking Fluids on the Wear Resistance of Steels. Procedia CIRP 13, pages 108-113.
Crossref
. 2014. Engineering Tribology. Engineering Tribology
371
428
.
Joachim Schulz, Ekkard Brinksmeier & Daniel Meyer. (2013) On the Interactions of Additives in Metalworking Fluids with Metal Surfaces. Lubricants 1:4, pages 75-94.
Crossref
Ioan D. Marinescu, W. Brian Rowe, Boris Dimitrov & Hitoshi Ohmori. 2013. Tribology of Abrasive Machining Processes. Tribology of Abrasive Machining Processes
483
517
.
Octavio Furlong, Brendan Miller & Wilfred T. Tysoe. (2012) Shear-induced boundary film formation from dialkyl sulfides on copper. Wear 274-275, pages 183-187.
Crossref
Archana Singh, Ravi T. Gandra, Eric W. Schneider & Sanjay K. Biswas. (2011) Lubricant Degradation and Related Wear of a Steel Pin in Lubricated Sliding Against a Steel Disc. ACS Applied Materials & Interfaces 3:7, pages 2512-2521.
Crossref
Octavio J. Furlong, Brendan P. Miller, Peter Kotvis & Wilfred. T. Tysoe. (2011) Low-Temperature, Shear-Induced Tribofilm Formation from Dimethyl Disulfide on Copper. ACS Applied Materials & Interfaces 3:3, pages 795-800.
Crossref
Octavio Furlong, Brendan Miller, Zhenjun Li & Wilfred T. Tysoe. (2011) The surface chemistry of diethyl disulfide on copper. Surface Science 605:5-6, pages 606-611.
Crossref
Octavio J. Furlong, Brendan P. Miller, Zhenjun Li, Joshua Walker, Luke Burkholder & Wilfred T. Tysoe. (2010) The Surface Chemistry of Dimethyl Disulfide on Copper. Langmuir 26:21, pages 16375-16380.
Crossref
Brajendra K. Sharma, A. Adhvaryu & Sevim Z. Erhan. (2009) Friction and wear behavior of thioether hydroxy vegetable oil. Tribology International 42:2, pages 353-358.
Crossref
Chao Qiu, Sheng Han, Xingguo Cheng & Tianhui Ren. (2006) Determining the antioxidant activities of organic sulfides by rotary bomb oxidation test and pressurized differential scanning calorimetry. Thermochimica Acta 447:1, pages 36-40.
Crossref
Gwidon W. Stachowiak & Andrew W. Batchelor. 2006. Engineering Tribology. Engineering Tribology
363
417
.
Frank Hipler, Roland A. Fischer & Jens Müller. (2005) Matrix-isolation pyrolysis investigation of mercapto-functionalized 1,3,4-thiadiazoles: thermal stability of thiadiazole lubricant additives. Phys. Chem. Chem. Phys. 7:5, pages 731-737.
Crossref
Hon So, Mathias Woydt, Zygmunt Rymuza, Czeslaw Kajdas, Michael Furey, Joz¡e Viz¡intin, Wilfred Tysoe, Peter Kotvis, Ilia Buyanovsky, Zinaida Ignatieva, Ruvim Zaslavsky, Matgorzata Ziomek-Moroz, Jeffrey Hawk, Einar Bardal & Asgeir Bardal. 2004. Surface Modification and Mechanisms. Surface Modification and Mechanisms.
Paul Pigram, Narelle Brack, Kazuhisa Miyoshi, Nikolai Myshkin, Mark Petrokovets, Scott Edwards, Nguyen Duc Tran, Maria Provatas, Namita Roy Choudhury, Naba Dutta, Besim Ben-Nissan, Giuseppe Pezzotti, Wolfgang Mu¨ ller, Tadeusz Burakowski, Marian Szczerek, Waldemar Tuszynski, Christina Lim, S Lim, Jianbin Luo & Shizhu Wen. 2004. Mechanical Tribology. Mechanical Tribology.
Ioan D. Marinescu, W. Brian Rowe, Boris Dimitrov & Ichiro Inasaki. 2004. Tribology of Abrasive Machining Processes. Tribology of Abrasive Machining Processes
587
633
.
. 2003. Tribochemistry of Lubricating Oils. Tribochemistry of Lubricating Oils
317
350
.
. 2003. Lubricated Wear - Science and Technology. Lubricated Wear - Science and Technology
99
131
.
W. Piekoszewski, M. Szczerek & W. Tuszynski. (2006) A method for testing lubricants under conditions of scuffing. Part II. The anti‐seizure action of lubricating oils. Tribotest 9:1, pages 35-48.
Crossref
Zhang Ning, Zhuang Da-Ming, Liu Jia-Jun, Fang Xiao-Dong & Guan Ming-Xi. (2001) Effect of sulphide layers on the tribological behavior of steels under boundary lubrication conditions. Applied Surface Science 181:1-2, pages 61-67.
Crossref
W Piekoszewski, M Szczerek & W Tuszynski. (2001) The action of lubricants under extreme pressure conditions in a modified four-ball tester. Wear 249:3-4, pages 188-193.
Crossref
W. Piekoszezuski, M. Szczerek & W. Tuszynski. (2006) Method for scuffing propagation assessment. Tribotest 7:3, pages 219-228.
Crossref
J Lara, K.K Surerus, P.V Kotvis, M.E Contreras, J.L Rico & W.T Tysoe. (2000) The surface and tribological chemistry of carbon disulfide as an extreme-pressure additive. Wear 239:1, pages 77-82.
Crossref
I. E. Selezneva, A. Ya. Levin & S. V. Monin. (1999) Detergent-dispersant additives for motor oils. Alkylphenolates. Chemistry and Technology of Fuels and Oils 35:6, pages 389-395.
Crossref
Jen Fin Lin, Chau Chang Chou & San Tong Chen. (1999) Models for Temperature-Kinetic Aspect of Friction and Wear in Oil Lubrication. Journal of Tribology 121:4, pages 774-786.
Crossref
Ichiro Minami, Hyun‐Soo Hong & Naresh C. Mathur. (2006) Lubrication performance of model organic compounds in high oleic sunflower oil. Journal of Synthetic Lubrication 16:1, pages 1-12.
Crossref
G. F. Pavelko. (1998) A new mechanochemical reaction of thiols with iron metal. Russian Chemical Bulletin 47:11, pages 2316-2317.
Crossref
Javier Lara, Thomas Blunt, Peter Kotvis, Alan Riga & Wilfred T. Tysoe. (1998) Surface Chemistry and Extreme-Pressure Lubricant Properties of Dimethyl Disulfide. The Journal of Physical Chemistry B 102:10, pages 1703-1709.
Crossref
Christopher McFadden, Cristian Soto & Nicholas D Spencer. (1997) Adsorption and surface chemistry in tribology. Tribology International 30:12, pages 881-888.
Crossref
S. Płaza & R. Gruziński. (1996) Homogeneous and heterogeneous thermal decomposition of diphenyl disulphide. Wear 194:1-2, pages 212-218.
Crossref
Sung-H. Choa, Kenneth C. Ludema, Gregg E. Potter, Benjamin M. Dekoven, Ted A. Morgan & Kishore K. Kar. (1994) A model of the dynamics of boundary film formation. Wear 177:1, pages 33-45.
Crossref
S. Plaza, B. Mazurkiewicz & R. Gruziński. (1994) Thermal decomposition of dibenzyl disulphide and its load-carrying mechanism. Wear 174:1-2, pages 209-216.
Crossref
. 1993. Engineering TriBology. Engineering TriBology
425
484
.
O.N. Anand, Vijay Kumar, V.P. Malik & R.P.S. Bist. (1992) Load-carrying characteristics of reaction films of alkyl aryl sulphides. Wear 154:2, pages 349-359.
Crossref
. 1990. Encyclopedia of Tribology. Encyclopedia of Tribology
381
448
.
N. P. Mustafaev, N. A. Blinnikova & I. P. Ismailov. (1989) Lubricating effect of xanthic acid derivatives. Chemistry and Technology of Fuels and Oils 25:5, pages 251-254.
Crossref
D.F. Heenan, K.R. Januszkiewicz & H.H. Sulek. (1988) Wear and friction characteristics of aromatic thiocompounds during aluminum-on-steel sliding contact. Wear 123:3, pages 257-268.
Crossref
. 1985. Mechanics and Chemistry in Lubrication. Mechanics and Chemistry in Lubrication
255
307
.
Klaus Meyer. (2010) Schichtbildungsprozesse und Wirkungsmechanismus schichtbildender Additive für Schmierstoffe. Zeitschrift für Chemie 24:12, pages 425-435.
Crossref
R. Schumacher, E. Gegner, A. Schmidt, H.J. Mathieu & D. Landolt. (1980) Auger electron spectroscopy study on reaction layers formed under Reichert wear test conditions in the presence of extreme pressure additives. Tribology International 13:6, pages 311-317.
Crossref
K. Meyer, H. Berndt & B. Essiger. (1980) Interacting mechanisms of organic sulfides with metallic surfaces and their importance for problems of friction and lubrication. Applications of Surface Science 4:2, pages 154-161.
Crossref
Donald R. Wheeler. (1978) X-ray photoelectron spectroscopic study of surface chemistry of dibenzyl disulfide on steel under mild and severe wear conditions. Wear 47:2, pages 243-254.
Crossref
R.J. Bird & G.D. Galvin. (1976) The application of photoelectron spectroscopy to the study of e. p. films on lubricated surfaces. Wear 37:1, pages 143-167.
Crossref
R. M. Matveevskii, I. A. Buyanovskii, V. L. Lashkhi & A. B. Vipper. (1976) Estimation of activation energy of chemical modification of frictional surfaces under boundary lubrication conditions. Chemistry and Technology of Fuels and Oils 12:2, pages 151-153.
Crossref
R. J. BIRD & G. D. GALVIN. (1975) Electron spectroscopic observations on extreme pressure lubrication. Nature 254:5496, pages 130-131.
Crossref