Xikai Yu, Yilun Xu, Guillermo Morales-Espejel, Fionn Dunne & Daniele Dini. (2024) On the importance of Crystal Plasticity Finite Element discretisation for the identification of crack initiation in RCF using energy-based criteria. Computational Materials Science 232, pages 112651.
Crossref

J.X. Li, B.N. Wu, H.H. Ding, R. Galas, M. Omasta, Z.F. Wen, J. Guo & W.J. Wang. (2023) Wear and damage behaviours of wheel and rail materials: Effects of friction modifier and environmental temperature. Wear 523, pages 204796.
Crossref

Björn Kunzelmann, Pawel Rycerz, Yilun Xu, Nagaraj K. Arakere & Amir Kadiric. (2023) Prediction of rolling contact fatigue crack propagation in bearing steels using experimental crack growth data and linear elastic fracture mechanics. International Journal of Fatigue 168, pages 107449.
Crossref

Florian Meray, Thibaut Chaise, Anthony Gravouil, Pierre Depouhon, Bruno Descharrieres & Daniel Nélias. (2022) A novel SAM/X-FEM coupling approach for the simulation of 3D fatigue crack growth under rolling contact loading. Finite Elements in Analysis and Design 206, pages 103752.
Crossref

Chris J Hooke. (2021) Rapid analysis of the effects of surface and sub-surface defects in elastohydrodynamic contacts. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 236:1, pages 593-606.
Crossref

Luís Coelho, António C. Batista, João Paulo Nobre & Maria José Marques. (2021) Rolling and Rolling-Sliding Contact Fatigue Failure Mechanisms in 32 CrMoV 13 Nitrided Steel—An Experimental Study. Applied Sciences 11:21, pages 10499.
Crossref

T. Touret, C. Changenet, F. Ville, J. Cavoret & V. Abousleiman. (2020) Experimental investigations on the effect of micropitting on friction – Part 1. Tribology International 149, pages 105678.
Crossref

Grzegorz Lesiuk, Michał Smolnicki, Rafał Mech, Anna Zięty & Cristiano Fragassa. (2020) Analysis of fatigue crack growth under mixed mode (I + II) loading conditions in rail steel using CTS specimen. Engineering Failure Analysis 109, pages 104354.
Crossref

Oleksandra Datsyshyn & Volodymyr PanasyukOleksandra Datsyshyn & Volodymyr Panasyuk. 2020. Structural Integrity Assessment of Engineering Components Under Cyclic Contact. Structural Integrity Assessment of Engineering Components Under Cyclic Contact 25 64 .

Pawel Rycerz & Amir Kadiric. (2019) The Influence of Slide–Roll Ratio on the Extent of Micropitting Damage in Rolling–Sliding Contacts Pertinent to Gear Applications. Tribology Letters 67:2.
Crossref

Rubing Guo, Guangxue Yang, Zhengyang Li, Zhiming Liu & Yujie Wei. (2019) Statistical analysis on rolling contact fatigue in railroad axle bearing steel. Fatigue & Fracture of Engineering Materials & Structures 42:3, pages 651-663.
Crossref

Francesco Manieri, Kenred Stadler, Guillermo E. Morales-Espejel & Amir Kadiric. (2019) The origins of white etching cracks and their significance to rolling bearing failures. International Journal of Fatigue 120, pages 107-133.
Crossref

Guillaume Vouaillat, Jean-Philippe Noyel, Fabrice Ville, Xavier Kleber & Sylvain Rathery. (2019) From Hertzian contact to spur gears: analyses of stresses and rolling contact fatigue. Mechanics & Industry 20:6, pages 626.
Crossref

S. Ancellotti, V. Fontanari, M. Dallago & M. Benedetti. (2018) A novel experimental procedure to reproduce the load history at the crack tip produced by lubricated rolling sliding contact fatigue. Engineering Fracture Mechanics 192, pages 129-147.
Crossref

Francisco Gutiérrez Guzmán, Mehmet Oezel, Georg Jacobs, Gero Burghardt, Christoph Broeckmann & Thomas Janitzky. (2018) Influence of Slip and Lubrication Regime on the Formation of White Etching Cracks on a Two-Disc Test Rig. Lubricants 6:1, pages 8.
Crossref

F. Gutiérrez Guzmán, M. Oezel, G. Jacobs, G. Burghardt, C. Broeckmann & T. Janitzky. (2017) Reproduction of white etching cracks under rolling contact loading on thrust bearing and two-disc test rigs. Wear 390-391, pages 23-32.
Crossref

Simone Ancellotti, Matteo Benedetti, Michele Dallago & Vigilio Fontanari. (2017) The role of the second body on the pressurization and entrapment of oil in cracks produced under lubricated rolling-sliding contact fatigue. Theoretical and Applied Fracture Mechanics 91, pages 3-16.
Crossref

Marion Le, Fabrice Ville, Xavier Kleber, Jean-Yves Buffière, Jérôme Cavoret, Marie-Christine Sainte-Catherine & Laurence Briancon. (2017) Rolling contact fatigue crack propagation in nitrided alloyed steels. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 231:9, pages 1192-1208.
Crossref

Pawel Rycerz, Andrew Olver & Amir Kadiric. (2017) Propagation of surface initiated rolling contact fatigue cracks in bearing steel. International Journal of Fatigue 97, pages 29-38.
Crossref

O. P. Datsyshyn & V. V. Panasyuk. (2017) Methods for the Evaluation of the Contact Durability of Elements of the Tribojoints (A Survey). Materials Science 52:4, pages 447-459.
Crossref

M. Dallago, M. Benedetti, S. Ancellotti & V. Fontanari. (2016) The role of lubricating fluid pressurization and entrapment on the path of inclined edge cracks originated under rolling–sliding contact fatigue: Numerical analyses vs. experimental evidences. International Journal of Fatigue 92, pages 517-530.
Crossref

Philipp Rettenmeier, Eberhard Roos, Stefan Weihe & Xaver Schuler. (2016) Assessment of mixed mode crack propagation of crane runway girders subjected to cyclic loading. Engineering Fracture Mechanics 153, pages 11-24.
Crossref

O.P. Datsyshyn, V.V. Panasyuk & A.Yu. Glazov. (2016) The model of the residual life time estimation of tribojoint elements by formation criteria of the typical contact fatigue damages. International Journal of Fatigue 83, pages 300-312.
Crossref

Simone Ancellotti, Matteo Benedetti, Michele Dallago & Vigilio Fontanari. (2016) Fluid Pressurization and Entrapment Effects on the SIFs of Cracks produced under lubricated Rolling-Sliding Contact Fatigue. Procedia Structural Integrity 2, pages 3098-3108.
Crossref

Marion Le, Fabrice Ville, Xavier Kleber, Jérôme Cavoret, Marie C Sainte-Catherine & Laurence Briancon. (2015) Influence of grain boundary cementite induced by gas nitriding on the rolling contact fatigue of alloyed steels for gears. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 229:8, pages 917-928.
Crossref

Arnaud Ruellan, Xavier Kleber, Fabrice Ville, Jérôme Cavoret & Bernard Liatard. (2014) Understanding white etching cracks in rolling element bearings: Formation mechanisms and influent tribochemical drivers. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 229:8, pages 886-901.
Crossref

David I. Fletcher. (2014) Numerical simulation of near surface rail cracks subject to thermal contact stress. Wear 314:1-2, pages 96-103.
Crossref

J. Jurenka & M. Španiel. (2014) Advanced FE model for simulation of pitting crack growth. Advances in Engineering Software 72, pages 218-225.
Crossref

V.V. Panasyuk & O.P. Datsyshyn. (2014) Material Damages and Life Time of Solids under a Cyclic Contact. Procedia Materials Science 3, pages 1250-1256.
Crossref

Jianbin Chen, Qihong Fang & Youwen Liu. (2013) Interaction between dislocation and subsurface crack under condition of slip caused by half-plane contact surface normal force. Engineering Fracture Mechanics 114, pages 115-126.
Crossref

M. Ševčík, P. Hutař, L. Náhlík & S. Seitl. (2013) The effect of constraint level on a crack path. Engineering Failure Analysis 29, pages 83-92.
Crossref

M. Berer, Z. Major & G. Pinter. (2013) Elevated pitting wear of injection molded polyetheretherketone (PEEK) rolls. Wear 297:1-2, pages 1052-1063.
Crossref

Shunsuke Oyama, Katsuyuki Kida, Edson Costa Santos, Hitonobu Koike, Takashi Honda & Yuji Kashima. (2012) Observations of Cracks from Microscopic Holes of PEEK Bearings under Rolling-Contact Fatigue in Water. Advanced Materials Research 566, pages 197-202.
Crossref

Ali Beheshti & M.M. Khonsari. (2011) On the prediction of fatigue crack initiation in rolling/sliding contacts with provision for loading sequence effect. Tribology International 44:12, pages 1620-1628.
Crossref

O. P. Datsyshyn. (2011) Modeling of the initiation of contact fatigue damages and estimation of the durability of elements of tribological conjunctions. Materials Science 47:2, pages 188-200.
Crossref

Arthur Francisco, Houssein Abbouchi & Bernard Villechaise. (2011) A New Approach for Rolling Contact Fatigue Numerical Study. Application to a Brittle Epoxy Resin. Journal of Tribology 133:3.
Crossref

Radim Halama, Rostislav Fajkoš, Petr Matušek, Petra Bábková, František Fojtík & Leo Václavek. (2011) Contact defects initiation in railroad wheels – Experience, experiments and modelling. Wear 271:1-2, pages 174-185.
Crossref

F.J. Franklin, A. Gahlot, D.I. Fletcher, J.E. Garnham & C. Davis. (2011) Three-dimensional modelling of rail steel microstructure and crack growth. Wear 271:1-2, pages 357-363.
Crossref

O.P. Datsyshyn, V.V. Panasyuk & A.Yu. Glazov. (2011) Modeling of fatigue contact damages formation in rolling bodies and assessment of their lifetime. Wear 271:1-2, pages 186-194.
Crossref

J E Garnham, D I Fletcher, C L Davis & F J Franklin. (2016) Visualization and Modelling to Understand Rail Rolling Contact Fatigue Cracks in Three Dimensions. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit 225:2, pages 165-178.
Crossref

G. Vallone & M. Guagliano. (2011) Photoelastic analysis of surface-cracked elements in presence of Hertzian contact and interposed fluid. Procedia Engineering 10, pages 3575-3581.
Crossref

G K Nikas. (2010) A state-of-the-art review on the effects of particulate contamination and related topics in machine-element contacts. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 224:5, pages 453-479.
Crossref

Jun Guo, Wei Li, Ze Feng Wen & Xue Song Jin. (2010) Mutual Interaction of Two Rail Surface Cracks under Thermo-Mechanical Contact Loading. Advanced Materials Research 97-101, pages 543-546.
Crossref

D.I. Fletcher, L. Smith & A. Kapoor. (2009) Rail rolling contact fatigue dependence on friction, predicted using fracture mechanics with a three-dimensional boundary element model. Engineering Fracture Mechanics 76:17, pages 2612-2625.
Crossref

Y. Ding & J.A. Gear. (2009) Spalling depth prediction model. Wear 267:5-8, pages 1181-1190.
Crossref

G. Fajdiga & M. Sraml. (2009) Fatigue crack initiation and propagation under cyclic contact loading. Engineering Fracture Mechanics 76:9, pages 1320-1335.
Crossref

M. Ishida. 2009. Wheel–Rail Interface Handbook. Wheel–Rail Interface Handbook 701 758 .

S.R. Lewis & R.S. Dwyer-Joyce. 2009. Wheel–Rail Interface Handbook. Wheel–Rail Interface Handbook 437 455 .

D.I. Fletcher, F.J. Franklin & A. Kapoor. 2009. Wheel–Rail Interface Handbook. Wheel–Rail Interface Handbook 280 310 .

G Donzella, A Mazzù & C Petrogalli. (2009) Competition between wear and rolling contact fatigue at the wheel—rail interface: some experimental evidence on rail steel. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit 223:1, pages 31-44.
Crossref

Stanislav Pehan, Janez Kramberger, Jože Flašker & Boštjan Zafošnik. (2008) Investigation of crack propagation scatter in a gear tooth’s root. Engineering Fracture Mechanics 75:5, pages 1266-1283.
Crossref

S. Glodež, R. Potočnik, J. Flašker & B. Zafošnik. (2008) Numerical modelling of crack path in the lubricated rolling–sliding contact problems. Engineering Fracture Mechanics 75:3-4, pages 880-891.
Crossref

G. Fajdiga, Z. Ren & J. Kramar. (2007) Comparison of virtual crack extension and strain energy density methods applied to contact surface crack growth. Engineering Fracture Mechanics 74:17, pages 2721-2734.
Crossref

Paweł Pyrzanowski. (2007) Estimation and consequences of the crack thickness parameter in the assessment of crack growth behaviour of “squat” type cracks in the rail–wheel contact zone. Engineering Fracture Mechanics 74:16, pages 2574-2584.
Crossref

Xiaoqing Jin, Leon M. Keer & Eugene L. Chez. (2007) Numerical simulation of growth pattern of a fluid-filled subsurface crack under moving hertzian loading. International Journal of Fracture 142:3-4, pages 219-232.
Crossref

K. KIDA, K. YOSHIDOME, K. YAMAKAWA, H. HARADA & N. OGUMA. (2006) Flaking failures originating from microholes of bearings under rolling contact fatigue. Fatigue & Fracture of Engineering Materials and Structures 29:12, pages 1021-1030.
Crossref

D I Fletcher & A Kapoor. (2006) Rapid method of stress intensity factor calculation for semi-elliptical surface breaking cracks under three-dimensional contact loading. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit 220:3, pages 219-234.
Crossref

G. Fajdiga, M. Sraml & J. Flasker. 2006. Fracture of Nano and Engineering Materials and Structures. Fracture of Nano and Engineering Materials and Structures 197 198 .

O. P. Datsyshyn. (2005) Service life and fracture of solid bodies under the conditions of cyclic contact interaction. Materials Science 41:6, pages 709-733.
Crossref

Boštjan Zafošnik, Zoran Ren, Jože Flašker & Gennady Mishuris. (2005) Modelling of Surface Crack Growth under Lubricated Rolling–Sliding Contact Loading. International Journal of Fracture 134:2, pages 127-149.
Crossref

Yu Zhang, Jun-Kwang Song & Brian R. Lawn. (2005) Deep-penetrating conical cracks in brittle layers from hydraulic cyclic contact. Journal of Biomedical Materials Research Part B: Applied Biomaterials 73B:1, pages 186-193.
Crossref

Stanisław Bogdański, Paweł Lewicki & Maciej Szymaniak. (2005) Experimental and theoretical investigation of the phenomenon of filling the RCF crack with liquid. Wear 258:7-8, pages 1280-1287.
Crossref

Stanisław Bogdański & Marcin Trajer. (2005) A dimensionless multi-size finite element model of a rolling contact fatigue crack. Wear 258:7-8, pages 1265-1272.
Crossref

S. Beretta, F. Braghin, G. Bucca & H. Desimone. (2005) Structural integrity analysis of a tram-way: load spectra and material damage. Wear 258:7-8, pages 1255-1264.
Crossref

G. Donzella, M. Faccoli, A. Ghidini, A. Mazzù & R. Roberti. (2005) The competitive role of wear and RCF in a rail steel. Engineering Fracture Mechanics 72:2, pages 287-308.
Crossref

M. Guagliano & L. Vergani. (2005) Experimental and numerical analysis of sub-surface cracks in railway wheels. Engineering Fracture Mechanics 72:2, pages 255-269.
Crossref

S. Bogdański. 2005. Life Cycle Tribology. Life Cycle Tribology 709 721 .

Sandrine Coulon, Fabrice Vtlle & Ton Lubrecht. 2005. Life Cycle Tribology. Life Cycle Tribology 691 702 .

K. KIDA, T. URAKAMI, T. YAMAZAKI & K. KITAMURA. (2004) Surface crack growth of silicon nitride bearings under rolling contact fatigue. Fatigue <html_ent glyph="@amp;" ascii="&"/> Fracture of Engineering Materials and Structures 27:8, pages 657-668.
Crossref

K. KIDA, T. YAMAZAKI, M. SHIBATA, N. OGUMA & H. HARADA. (2004) Crack initiation from micro surface holes in bearings under rolling contact fatigue. Fatigue & Fracture of Engineering Materials & Structures 27:6, pages 481-493.
Crossref

G. Fajdiga, J. Flašker & S. Glodež. (2004) The influence of different parameters on surface pitting of contacting mechanical elements. Engineering Fracture Mechanics 71:4-6, pages 747-758.
Crossref

Yan Ding & Neville F Rieger. (2003) Spalling formation mechanism for gears. Wear 254:12, pages 1307-1317.
Crossref

M. ISHIDA, M. AKAMA, K. KASHIWAYA & A. KAPOOR. (2003) The current status of theory and practice on rail integrity in Japanese railways—rolling contact fatigue and corrugations. Fatigue & Fracture of Engineering Materials & Structures 26:10, pages 909-919.
Crossref

J. W. RINGSBERG & A. BERGKVIST. (2008) On propagation of short rolling contact fatigue cracks. Fatigue & Fracture of Engineering Materials & Structures 26:10, pages 969-983.
Crossref

M. F. FROLISH, D. I. FLETCHER & J. H. BEYNON. (2002) A quantitative model for predicting the morphology of surface initiated rolling contact fatigue cracks in back‐up roll steels. Fatigue & Fracture of Engineering Materials & Structures 25:11, pages 1073-1086.
Crossref

Z. Ren, S. Glodez, G. Fajdiga & M. Ulbin. (2002) Surface initiated crack growth simulation in moving lubricated contact. Theoretical and Applied Fracture Mechanics 38:2, pages 141-149.
Crossref

Makoto Akama & Tadao Mori. (2002) Boundary element analysis of surface initiated rolling contact fatigue cracks in wheel/rail contact systems. Wear 253:1-2, pages 35-41.
Crossref

S. Glodež, Z. Ren & G. Fajdiga. (2001) Computational modelling of the surface fatigue crack growth on gear teeth flanks. Communications in Numerical Methods in Engineering 17:8, pages 529-541.
Crossref

N Gao, R. S. Dwyer-Joyce & D. G. Grieve. (2005) Disc machine testing to assess the life of surface-damaged railway track. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit 215:4, pages 261-275.
Crossref

C.H. Chue, H.H. Chung, J.F. Lin & C.C. Chou. (2001) The effects of strain hardened layer on pitting formation during rolling contact. Wear 249:1-2, pages 108-115.
Crossref

C.H Chue & H.H Chung. (2000) Pitting formation under rolling contact. Theoretical and Applied Fracture Mechanics 34:1, pages 1-9.
Crossref

N Gao & R. S. Dwyer-Joyce. (2005) The effects of surface defects on the fatigue of water-and oil-lubricated contacts. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 214:6, pages 611-626.
Crossref

D. I. Fletcher & J. H. Beynon. (2005) The effect of intermittent lubrication on the fatigue life of pearlitic rail steel in rolling-sliding contact. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit 214:3, pages 145-158.
Crossref

D. I. Fletcher & J. H. Beynon. (2005) Equilibrium of crack growth and wear rates during unlubricated rolling-sliding contact of pearlitic rail steel. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit 214:2, pages 93-105.
Crossref

B. J. Roylance, J. A. Williams & R Dwyer-Joyce. (2005) Wear debris and associated wear phenomena—fundamental research and practice. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 214:1, pages 79-105.
Crossref

D. I. Fletcher & J. H. Beynon. (2005) A simple method of stress intensity factor calculation for inclined surface-breaking cracks with crack face friction under contact loading. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 213:6, pages 481-486.
Crossref

D I Fletcher & J H Beynon. (2005) A simple method of stress intensity factor calculation for inclined fluid-filled surface-breaking cracks under contact loading. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 213:4, pages 299-304.
Crossref

D. Ne´lias, M. L Dumont, F. Champiot, A. Vincent, D. Girodin, R. Fouge´res & L. Flamand. (1999) Role of Inclusions, Surface Roughness and Operating Conditions on Rolling Contact Fatigue. Journal of Tribology 121:2, pages 240-251.
Crossref

Y Wang & M Hadfield. (1999) Rolling contact fatigue failure modes of lubricated silicon nitride in relation to ring crack defects. Wear 225-229, pages 1284-1292.
Crossref

A. W. Eberhardt & B. S. Kim. (1998) Stress Intensity Factors for a Vertical Surface Crack in Polyethylene Subject to Rolling and Sliding Contact. Journal of Biomechanical Engineering 120:6, pages 778-783.
Crossref

M. Kaneta, K. Matsuda, K. Murakami & H. Nishikawa. (1998) A Possible Mechanism for Rail Dark Spot Defects. Journal of Tribology 120:2, pages 304-309.
Crossref

C. H. Kuo, L. M. Keer & M. P. Bujold. (1997) Effects of Multiple Cracking on Crack Growth and Coalescence in Contact Fatigue. Journal of Tribology 119:3, pages 385-390.
Crossref

Y. Murakami & S. Hamada. (1997) A NEW METHOD FOR THE MEASUREMENT OF MODE II FATIGUE THRESHOLD STRESS INTENSITY FACTOR RANGE Δ K τth . Fatigue & Fracture of Engineering Materials & Structures 20:6, pages 863-870.
Crossref

V. Lamacq, M. C. Dubourg & L. Vincent. (1996) Crack Path Prediction Under Fretting Fatigue—A Theoretical and Experimental Approach. Journal of Tribology 118:4, pages 711-720.
Crossref

Takahito GOSHIMA & Yuuji KAMISHIMA. (1996) Mutual Interference of Two Surface Cracks in a Semi-Infinite Body Due to Rolling Contact with Frictional Heating by a Rigid Roller. JSME international journal. Ser. A, Mechanics and material engineering 39:1, pages 26-33.
Crossref

S. Bogdanski, M. Olzak & J. Stupnicki. (1996) Numerical stress analysis of rail rolling contact fatigue cracks. Wear 191:1-2, pages 14-24.
Crossref

O. P. Datsyshyn, H. P. Marchenko, O. D. Zynyuk & P. M. Hrytsyshyn. (1996) Residual durability of the surface layer of ShKh15 bearing steel. Materials Science 31:2, pages 192-199.
Crossref

Yan Ding, Rhys Jones & Bruce Kuhnell. (1995) Numerical analysis of subsurface crack failure beneath the pitch line of a gear tooth during engagement. Wear 185:1-2, pages 141-149.
Crossref

Alan W. Eberhardt & Shrinivas Peri. (1995) A Vertical Surface Breaking Crack in Normal and Sliding Joint Contact. Journal of Biomechanical Engineering 117:1, pages 153-155.
Crossref

W.R. Tyfour & J.H. Beynon. (1994) The effect of rolling direction reversal on fatigue crack morphology and propagation. Tribology International 27:4, pages 273-282.
Crossref

Takahito Goshima & Yuuji Kamishima. (1994) Mutual Interference of Multiple Surface Cracks Due to Rolling-Sliding Contact with Frictional Heating. JSME international journal. Ser. A, Mechanics and material engineering 37:3, pages 216-223.
Crossref

P.C. Bastias, G.T. Hahn, C.A. Rubin, V. Gupta & X. Leng. (1994) Analysis of rolling contact spall life in 440C bearing steel. Wear 171:1-2, pages 169-178.
Crossref

Y. Kimura. 1992. Wear Particles: Frorn the Cradle to the Grave, Proceedings of the 18th Leeds-Lyon Symposium on Tribology. Wear Particles: Frorn the Cradle to the Grave, Proceedings of the 18th Leeds-Lyon Symposium on Tribology 427 434 .

Yoshitsugu Kimura & Masayuki Shima. (1991) Longitudinal contact-point model for calculating stress-intensity factors at surface cracks in sliding wear. Wear 141:2, pages 335-347.
Crossref

Metin Ozen. Analysis of a Surface Crack Subject to a Rolling/Sliding Contact. Analysis of a Surface Crack Subject to a Rolling/Sliding Contact.

Norio Hasebe, Mikiya Okumura & Takuji Nakamura. (1989) Frictional Punch and Crack in Plane Elasticity. Journal of Engineering Mechanics 115:6, pages 1137-1149.
Crossref

M. Kaneta & Y. Murakami. (1987) Effects of oil hydraulic pressure on surface crack growth in rolling/sliding contact. Tribology International 20:4, pages 210-217.
Crossref

J.C. Lee, T.N. Farris & L.M. Keer. (1987) Stress intensity factors for cracks of arbitrary shape near an interfacial boundary. Engineering Fracture Mechanics 27:1, pages 27-41.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.

People also read
Recommended articles
Cited by

To cite this article:

Reference style: APA Chicago Harvard

Citation copied to clipboard

Reference styles above use APA (6th edition), Chicago (16th edition) & Harvard (10th edition)

Download citation

Download a citation file in RIS format that can be imported by citation management software including EndNote, ProCite, RefWorks and Reference Manager.

Choose format: RIS BibTex RefWorks Direct Export

Choose options: Citation Citation & abstract Citation & references

Mechanism of Crack Growth in Lubricated Rolling/Sliding Contact

Articles from other publishers (109)

Information for

Open access

Opportunities

Help and information

Your download is now in progress and you may close this window

Login or register to access this feature