Sami Arsoy. (2024) Infrared Drying for Water Content Measurements of Soils. Geotechnical Testing Journal 47:2, pages 20220122.
Crossref
Achilleas L. Arvanitidis, Margaritis Kostoglou & Michael C. Georgiadis. (2023) Optimal Tunnel Dryer Operating Strategies for the Production of Ceramic Roof Tiles under Tight Quality Considerations. Industrial & Engineering Chemistry Research 62:31, pages 12235-12254.
Crossref
Maryam Askarishahi, Mohammad-Sadegh Salehi & Stefan Radl. (2023) Challenges in the Simulation of Drying in Fluid Bed Granulation. Processes 11:2, pages 569.
Crossref
Gabriella Rossi, Ruxandra-Stefania Chiujdea, Laura Hochegger, Ayoub Lharchi, John Harding, Paul Nicholas, Martin Tamke & Mette Ramsgaard Thomsen. 2023. Towards Radical Regeneration. Towards Radical Regeneration
487
500
.
C.P. Batuwatta-Gamage, C.M. Rathnayaka, H.C.P. Karunasena, W.D.C.C. Wijerathne, H. Jeong, Z.G. Welsh, M.A. Karim & Y.T. Gu. (2022) A physics-informed neural network-based surrogate framework to predict moisture concentration and shrinkage of a plant cell during drying. Journal of Food Engineering 332, pages 111137.
Crossref
Hugo Perazzini & Maisa Tonon Bitti Perazzini. 2022. Handbook of Biomass Valorization for Industrial Applications. Handbook of Biomass Valorization for Industrial Applications
129
178
.
Vasileios Chasiotis, Dimitrios Tzempelikos & Andronikos Filios. (2021) Evaluation of a Moisture Diffusion Model for Analyzing the Convective Drying Kinetics of Lavandula x allardii Leaves. Computation 9:12, pages 141.
Crossref
Emmanuel Purlis, Chiara Cevoli & Angelo Fabbri. (2021) Modelling Volume Change and Deformation in Food Products/Processes: An Overview. Foods 10:4, pages 778.
Crossref
Kottayat Nidhul, Sachin Kumar, Ajay Kumar Yadav & S. Anish. (2020) Computational and experimental studies on the development of an energy-efficient drier using ribbed triangular duct solar air heater. Solar Energy 209, pages 454-469.
Crossref
Mark A. Uebersax & Muhammad Siddiq. 2020. Handbook of Banana Production, Postharvest Science, Processing Technology, and Nutrition. Handbook of Banana Production, Postharvest Science, Processing Technology, and Nutrition
117
140
.
Gabriele A. Nagata, Thiago V. Costa, Maisa T.B. Perazzini & Hugo Perazzini. (2020) Coupled heat and mass transfer modelling in convective drying of biomass at particle-level: Model validation with experimental data. Renewable Energy 149, pages 1290-1299.
Crossref
H. Nelson, S. Deyo, S. Granzier-Nakajima, P. Puente, K. Tully & J. Webb. (2020) A mathematical model for meat cooking. The European Physical Journal Plus 135:3.
Crossref
A.M. Castro, E.Y. Mayorga & F.L. Moreno. (2019) Mathematical modelling of convective drying of feijoa (Acca sellowiana Berg) slices. Journal of Food Engineering 252, pages 44-52.
Crossref
Brais Martínez‐López, Niklas W. Bertelsen & Flemming Jessen. (2019) Determination of transport properties and mechanistic modeling of the coupled salt and water transport during osmotic dehydration of salmon induced by dry salting. Journal of Food Process Engineering 42:4.
Crossref
Esmaeel Seyedabadi, Mehdi Khojastehpour & Mohammad Hossein Abbaspour-Fard. (2019) Online measuring of quality changes of banana slabs during convective drying. Engineering in Agriculture, Environment and Food 12:1, pages 111-117.
Crossref
Atsushi Tanaka, Alexey Khakalo, Lauri Hauru, Antti Korpela & Hannes Orelma. (2018) Conversion of paper to film by ionic liquids: manufacturing process and properties. Cellulose 25:10, pages 6107-6119.
Crossref
Natalia M. Espector, Agustina Portu, Gustavo A. Santa Cruz & Gisela Saint Martin. (2018) Evaporation process in histological tissue sections for neutron autoradiography. Radiation and Environmental Biophysics 57:2, pages 153-162.
Crossref
Montana Rungsiyopas & Thierry Ruiz. (2018) Modelling of the shape effect on the drying shrinkage of wet granular materials. Chemical Engineering Research and Design 132, pages 295-302.
Crossref
Rani Puthukulangara Ramachandran, Mohsen Akbarzadeh, Jitendra Paliwal & Stefan Cenkowski. (2017) Computational Fluid Dynamics in Drying Process Modelling—a Technical Review. Food and Bioprocess Technology 11:2, pages 271-292.
Crossref
Alien Arias Barreto, Rita Abalone, Analía Gastón, Dario Ochandio, Leandro Cardoso & Ricardo Bartosik. (2017) Validation of a heat, moisture and gas concentration transfer model for soybean ( Glycine max ) grains stored in plastic bags (silo bags). Biosystems Engineering 158, pages 23-37.
Crossref
Thijs Defraeye. (2017) When to stop drying fruit: Insights from hygrothermal modelling. Applied Thermal Engineering 110, pages 1128-1136.
Crossref
Stamatios Babalis, Elias Papanicolaou & Vassilios Belessiotis. 2017. Solar Drying Technology. Solar Drying Technology
89
175
.
N. Shahari, N. Jamil & KA. Rasmani. (2016) Comparative Study of Shrinkage and Non-Shrinkage Model of Food Drying. Journal of Physics: Conference Series 738, pages 012087.
Crossref
Tushar Gulati & Ashim K. Datta. (2016) Coupled multiphase transport, large deformation and phase transition during rice puffing. Chemical Engineering Science 139, pages 75-98.
Crossref
Mohammad U.H. Joardder, Azharul Karim, Chandan Kumar & Richard J. BrownMohammad U. H. Joardder, Azharul Karim, Chandan Kumar & Richard J. Brown. 2016. Porosity. Porosity
47
64
.
Theodoros Varzakas & Constantina TziaAthanasia Goula. 2015. Handbook of Food Processing. Handbook of Food Processing
157
221
.
Julián Andrés Gómez Salazar, Gabriela Clemente Polo & Neus Sanjuán Pelliccer. (2015) Review of mathematical models to describe the food salting process. DYNA 82:190, pages 23-30.
Crossref
S. J. Sanabria, C. Lanvermann, F. Michel, D. Mannes & P. Niemz. (2014) Adaptive Neutron Radiography Correlation for Simultaneous Imaging of Moisture Transport and Deformation in Hygroscopic Materials. Experimental Mechanics 55:2, pages 403-415.
Crossref
S.J. Kowalski, A. Rybicki & K. Rajewska. (2014) Intensification of drying processes due to optimal operations. Chemical Engineering and Processing: Process Intensification 86, pages 22-29.
Crossref
Thijs Defraeye. (2014) Advanced computational modelling for drying processes – A review. Applied Energy 131, pages 323-344.
Crossref
Amira Touil, Saber Chemkhi & Fethi Zagrouba. (2014)
Moisture Diffusivity and Shrinkage of Fruit and Cladode of
Opuntia ficus-indica
during Infrared Drying
. Journal of Food Processing 2014, pages 1-9.
Crossref
S. Parthasarathi & C. Anandharamakrishnan. (2014) Modeling of Shrinkage, Rehydration and Textural Changes for Food Structural Analysis: A Review. Journal of Food Process Engineering 37:2, pages 199-210.
Crossref
Miloš Vasić, Željko Grbavčić & Zagorka Radojević. (2014) Determination of the moisture diffusivity coefficient and mathematical modeling of drying. Chemical Engineering and Processing: Process Intensification 76, pages 33-44.
Crossref
I. Lesov, S. Tcholakova & N. Denkov. (2014) Drying of particle-loaded foams for production of porous materials: mechanism and theoretical modeling. RSC Adv. 4:2, pages 811-823.
Crossref
Wan Noor Aidawati Wan Nadhari, Rokiah Hashim, Othman Sulaiman & Nadiah Jumhuri. (2014) Drying kinetics of oil palm trunk waste in control atmosphere and open air convection drying. International Journal of Heat and Mass Transfer 68, pages 14-20.
Crossref
S. J. Kowalski, A. Rybicki & K. Rajewska. (2013) Optimal control of convective drying of saturated porous materials. AIChE Journal 59:12, pages 4846-4857.
Crossref
Laura A. Ramallo, Miriam D. Hubinger & Rodolfo H. Mascheroni. (2013) Effect of Pulsed Vacuum Treatment on Mass Transfer and Mechanical Properties during Osmotic Dehydration of Pineapple Slices. International Journal of Food Engineering 9:4, pages 403-412.
Crossref
L.A RAMALLO & R.H. MASCHERONI. (2013) EFFECT OF SHRINKAGE ON PREDICTION ACCURACY OF THE WATER DIFFUSION MODEL FOR PINEAPPLE DRYING. Journal of Food Process Engineering 36:1, pages 66-76.
Crossref
G. Musielak & T. Śliwa. (2012) Fracturing of Clay During Drying: Modelling and Numerical Simulation. Transport in Porous Media 95:2, pages 465-481.
Crossref
Abdolreza Kharaghani, Thomas Metzger & Evangelos Tsotsas. (2012) An irregular pore network model for convective drying and resulting damage of particle aggregates. Chemical Engineering Science 75, pages 267-278.
Crossref
Emmanuel Stathatos, George-Christopher Vosniakos, Titos Giannakakis & Dimitrios Pantelis. (2012) Shrinkage-based die design for drying ceramic parts. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 226:5, pages 919-929.
Crossref
Ashish Dhall & Ashim K. Datta. (2011) Transport in deformable food materials: A poromechanics approach. Chemical Engineering Science 66:24, pages 6482-6497.
Crossref
G. Clemente, J. Bon, N. Sanjuán & A. Mulet. (2011) Drying modelling of defrosted pork meat under forced convection conditions. Meat Science 88:3, pages 374-378.
Crossref
Ratiya Thuwapanichayanan, Somkiat Prachayawarakorn, Jaruwan Kunwisawa & Somchart Soponronnarit. (2011) Determination of effective moisture diffusivity and assessment of quality attributes of banana slices during drying. LWT - Food Science and Technology 44:6, pages 1502-1510.
Crossref
Amit Halder, Ashish Dhall, Ashim K. Datta, D. Glenn Black, P.M. Davidson, Jiajie Li & Svetlana Zivanovic. (2011) A user-friendly general-purpose predictive software package for food safety. Journal of Food Engineering 104:2, pages 173-185.
Crossref
Abdolreza Kharaghani, Thomas Metzger & Evangelos Tsotsas. (2011) A proposal for discrete modeling of mechanical effects during drying, combining pore networks with DEM. AIChE Journal 57:4, pages 872-885.
Crossref
Sakamon Devahastin & Chalida Niamnuy. (2010) Invited review: Modelling quality changes of fruits and vegetables during drying: a review. International Journal of Food Science & Technology 45:9, pages 1755-1767.
Crossref
S.J. Kowalski. (2010) Control of mechanical processes in drying. Theory and experiment. Chemical Engineering Science 65:2, pages 890-899.
Crossref
D. Mihoubi & A. Bellagi. (2009) Stress Generated During Drying of Saturated Porous Media. Transport in Porous Media 80:3, pages 519-536.
Crossref
L.S. Arrieche, R.G. Corrêa & D.J.M. Sartori. (2009) Drying stresses and strains in a spherical food model. Computers & Chemical Engineering 33:11, pages 1805-1813.
Crossref
Chalida Niamnuy, Sakamon Devahastin, Somchart Soponronnarit & G.S. Vijaya Raghavan. (2008) Modeling coupled transport phenomena and mechanical deformation of shrimp during drying in a jet spouted bed dryer. Chemical Engineering Science 63:22, pages 5503-5512.
Crossref
S. Chemkhi & F. Zagrouba. (2008) Development of A Darcy-flow model applied to simulate the drying of shrinking media. Brazilian Journal of Chemical Engineering 25:3, pages 503-514.
Crossref
Ireneusz Białobrzewski, Magdalena Zielińska, Arun S. Mujumdar & Marek Markowski. (2008) Heat and mass transfer during drying of a bed of shrinking particles – Simulation for carrot cubes dried in a spout-fluidized-bed drier. International Journal of Heat and Mass Transfer 51:19-20, pages 4704-4716.
Crossref
Kamlesh C. Patel & Xiao Dong Chen. (2008) Drying of aqueous lactose solutions in a single stream dryer. Food and Bioproducts Processing 86:3, pages 185-197.
Crossref
Frédéric Couture, Stéphane Laurent & Michel A. Roques. (2007) Drying of two-phase media: Simulation with liquid pressure as driven force. AIChE Journal 53:7, pages 1703-1717.
Crossref