540
Views
26
CrossRef citations to date
0
Altmetric
Original Articles

Analysis of Drying Kinetics and Moisture Distribution in Convective Textile Fabric Drying

, &
Pages 485-497 | Published online: 06 Feb 2007

Keep up to date with the latest research on this topic with citation updates for this article.

Read on this site (12)

Miguel Thomas Yaovi Adankpo, Zhong Xiang, Huang Ye Feng & Miao Qian. (2023) Optimum design of stenter machine hot air supply chamber by coupling CFD & DOE. The Journal of The Textile Institute 0:0, pages 1-15.
Read now
amarjeet Daberao, Prafull Kolte, Ranjit Turukmane & Sujit Gulhane. (2022) Reproducibility of Shade During Dyeing of Cotton/Polyester Fabric by Varying the Process Condition. Journal of Natural Fibers 19:17, pages 15836-15845.
Read now
Miao Qian, Pengli Wei, Chengzhang Ma, Zhong Xiang, Jianzhang Xiao & Xudong Hu. (2022) Study on drying characters of a thin cotton fabric under uneven radial heating by the hot air jet. Drying Technology 40:15, pages 3115-3127.
Read now
Nikunjkumar G. Patel, Dadasaheb J. Shendage, Munjal G. Parikh, Surajit K. Basu & Mukund H. Bade. (2021) Energy model-based benchmarking of the drying process in the stenter machine. Drying Technology 39:8, pages 1114-1133.
Read now
Xinchen Yu, Wei Cao & Xuemei Ding. (2021) The effects of fabric’s mechanical properties on its motion and drying performance in a domestic tumble dryer. Drying Technology 39:4, pages 528-547.
Read now
Xinchen Yu & Xuemei Ding. (2020) The transverse motion of fabrics in domestic tumble dryers under different drying conditions. Drying Technology 39:1, pages 35-51.
Read now
Sabyasachi Mondal, Suvankar Dutta, Puja Agarwala, Vishvas Nimbalkar & Sunil S. Dhumal. (2020) Intensification of cellulosic fiber drying through fundamental insights and process modeling. Drying Technology 38:16, pages 2151-2161.
Read now
Xinchen Yu, Wei Cao, Yuhui Wei & Xuemei Ding. (2018) Wrinkling mechanism of woven cotton fabrics during domestic tumble drying. Drying Technology 36:9, pages 1098-1106.
Read now
Yuhui Wei, Jiale Hua & Xuemei Ding. (2017) A mathematical model for simulating heat and moisture transfer within porous cotton fabric drying inside the domestic air-vented drum dryer. The Journal of The Textile Institute 108:6, pages 1074-1084.
Read now
Ahmet Cay, Gokhan Gurlek & Nida Oglakcioglu. (2017) Analysis and modeling of drying behavior of knitted textile materials. Drying Technology 35:4, pages 509-521.
Read now
Rossane Mailde Santos, John Wilmer Parra Llanos, Marintho Bastos Quadri & Ivan CarlosC. da Rocha. (2015) Study of Drying and Consumption of Natural Gas in a Textile Stenter of Direct Heating. Drying Technology 33:1, pages 37-54.
Read now
Ahmet Cay, Işık Tarakçıoğlu & Arif Hepbasli. (2010) Exergetic Analysis of Textile Convective Drying with Stenters by Subsystem Models: Part 2—Parametric Study on Exergy Analysis. Drying Technology 28:12, pages 1368-1376.
Read now

Articles from other publishers (14)

Sumit Mandal, Ishmam Zahin Chowdhury, Nur-Us-Shafa Mazumder, Robert J. Agnew & Lynn M. Boorady. (2022) Characterization of Sweat Drying Performance of Single Layered Thermal Protective Fabrics Used in High-Risk Sector Workers’ Clothing. Polymers 14:24, pages 5393.
Crossref
Ngoctan Tran, Akash Sengupta, Jane-Sunn Liaw & Chi-Chuan Wang. (2022) Parametric Analysis of Cylinder Drying Process in Association with Various Materials. Applied Sciences 12:20, pages 10489.
Crossref
Jia-ao Dai & Yong fa Diao. (2022) Numerical analysis of transient coupled heat and moisture transfer in textile drying with porous relative impact jet. Applied Thermal Engineering 212, pages 118613.
Crossref
Branko Neral, Selestina Gorgieva & Manja Kurečič. (2022) Decontamination Efficiency of Thermal, Photothermal, Microwave, and Steam Treatments for Biocontaminated Household Textiles. Molecules 27:12, pages 3667.
Crossref
Xiao-Mei Huang, Lian-Sen Xiong, Yan-Wen Zheng, Hui-Qing Liu, Yi-Zhen Xu & Yong-Cai Li. (2021) Comparative investigation of performance of gas dryer and two other types of domestic clothes dryers. International Journal of Low-Carbon Technologies 16:2, pages 294-304.
Crossref
Volodymyr Atamanyuk, Zoriana Gnativ, Diana Kindzera, Dauren Janabayev, Alisher Khusanov & Botagoz Kaldybaeva. (2020) Hydrodynamics of Cotton Filtration Drying. Chemistry & Chemical Technology 14:3, pages 426-432.
Crossref
Yuhui Wei, Zhaowei Su, Huashan Lu & Xue Mei Ding. (2018) An efficient termination control strategy of air-vented dryer for fabric drying. International Journal of Clothing Science and Technology 30:3, pages 412-427.
Crossref
Karolina Słomka-Polonis, Bogusława Kordon-Łapczyńska & Jarosław Frączek. (2018) Drying kinetics of RDF: Experimental investigation and modeling. BIO Web of Conferences 10, pages 02030.
Crossref
Dinçer Akal, Kamil Kahveci, Ugur Akyol & Ahmet Cihan. (2016) Drying kinetics of cotton based yarn bobbins in a pressurized hot-air convective dryer. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 231:2, pages 294-308.
Crossref
Ugur Akyol, Pınar Tüfekci, Kamil Kahveci & Ahmet Cihan. (2014) A model for predicting drying time period of wool yarn bobbins using computational intelligence techniques. Textile Research Journal 85:13, pages 1367-1380.
Crossref
Pavla Križman Lavrič, Brigita Tomšič, Barbara Simončič, Marijn M. C. G. Warmoeskerken & Dragan Jocic. (2011) Functionalization of cotton with poly-NiPAAm/chitosan microgel: Part II. Stimuli-responsive liquid management properties. Cellulose 19:1, pages 273-287.
Crossref
Fang Long Zhu & Ke Jing Li. (2012) Modeling Heat and Moisture Transfer within Porous Textiles under High Temperature Gradients. Advanced Materials Research 455-456, pages 1136-1139.
Crossref
Ahmet Cihan, Kamil Kahveci, Ugur Akyol & Dinçer Akal. (2011) Drying Behavior of Polyester Based Yarn Bobbins in a Hot-Air Bobbin Dryer. Defect and Diffusion Forum 312-315, pages 848-853.
Crossref
A. Cay, I. Tarakçıo??lu & A. Hepbasli. (2007) Exergetic performance assessment of a stenter system in a textile finishing mill. International Journal of Energy Research 31:13, pages 1251-1265.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.