Advanced search
Publication Cover
Drying Technology
An International Journal
Volume 25, 2007 - Issue 1
Submit an article Journal homepage
238
Views
21
CrossRef citations to date
0
Altmetric
Original Articles

Experimental Validation of the Heat and Mass Transfer Model for Convective Drying

S.J. Kowalski Institute of Technology and Chemical Engineering, Poznań University of Technology, Poznań, PolandCorrespondence[email protected]
,
G. Musielak Institute of Technology and Chemical Engineering, Poznań University of Technology, Poznań, Poland
&
J. Banaszak Institute of Technology and Chemical Engineering, Poznań University of Technology, Poznań, Poland
Pages 107-121 | Published online: 10 Apr 2007

Citations (21)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (11)

Maciel da Costa Furtado, Arthur José Cunha da Silva, Arthur dos Reis Lemos Fontana, André Luiz Amarante Mesquita & Ronaldo Menezes dos Santos Junior. (2023) Numerical and experimental study on the drying process of iron ore in wagons. Drying Technology 41:11, pages 1783-1802.
Read now
Thomas Busser, Julien Berger, Amandine Piot, Mickael Pailha & Monika Woloszyn. (2019) Comparison of model numerical predictions of heat and moisture transfer in porous media with experimental observations at material and wall scales: An analysis of recent trends. Drying Technology 37:11, pages 1363-1395.
Read now
A. Compaore, A. O. Dissa, Yann Rogaume, Aditya Putranto, Xiao Dong Chen, Dave Mangindaan, André Zoulalian, Romain Rémond & E. Tiendrebeogo. (2017) Application of the reaction engineering approach (REA) for modeling of the convective drying of onion. Drying Technology 35:4, pages 500-508.
Read now
Ebru Mancuhan, Selin Özen, Perviz Sayan & Sibel Titiz Sargut. (2016) Experimental investigation of green brick shrinkage behavior with Bigot’s curves. Drying Technology 34:13, pages 1535-1545.
Read now
Lyes Bennamoun, Laurent Fraikin & Angélique Léonard. (2014) Modeling and Simulation of Heat and Mass Transfer During Convective Drying of Wastewater Sludge with Introduction of Shrinkage Phenomena. Drying Technology 32:1, pages 13-22.
Read now
A.J. J. van der Zanden & M.H. de Wit. (2012) A Procedure to Measure the Diffusion Coefficient of Water in Brick as a Function of the Water Concentration. Drying Technology 30:5, pages 526-534.
Read now
Yugang Li, Huanbin Liu, Jigeng Li & Jinsong Tao. (2011) Process Parameters Optimization for Energy Saving in Paper Machine Dryer Section. Drying Technology 29:8, pages 910-917.
Read now
H. Shokouhmand, V. Abdollahi, S. Hosseini & K. Vahidkhah. (2011) Performance Optimization of a Brick Dryer Using Porous Simulation Approach. Drying Technology 29:3, pages 360-370.
Read now
S. J. Kowalski & A. Pawłowski. (2010) Modeling of Kinetics in Stationary and Intermittent Drying. Drying Technology 28:8, pages 1023-1031.
Read now
S. J. Kowalski & A. Pawłowski. (2010) Drying of Wet Materials in Intermittent Conditions. Drying Technology 28:5, pages 636-643.
Read now
Stefan Jan Kowalski & Bolesław Mielniczuk. (2007) Analysis of Effectiveness and Stress Development during Convective and Microwave Drying. Drying Technology 26:1, pages 64-77.
Read now

Articles from other publishers (10)

P Broadbridge & B S Tilley. (2021) Diffusion of dermatological irritant in drying laundered cloth. Mathematical Medicine and Biology: A Journal of the IMA 38:4, pages 474-489.
Crossref
Tushar Gulati, Huacheng Zhu & Ashim K. Datta. (2016) Coupled electromagnetics, multiphase transport and large deformation model for microwave drying. Chemical Engineering Science 156, pages 206-228.
Crossref
Alptug Yataganbaba & İrfan Kurtbaş. (2016) A scientific approach with bibliometric analysis related to brick and tile drying: A review. Renewable and Sustainable Energy Reviews 59, pages 206-224.
Crossref
Dario Donnarumma, Giovanna Tomaiuolo, Sergio Caserta, Yonas Gizaw & Stefano Guido. (2015) Water evaporation from porous media by Dynamic Vapor Sorption. Colloids and Surfaces A: Physicochemical and Engineering Aspects 480, pages 159-164.
Crossref
M. Van Belleghem, M. Steeman, A. Janssens & M. De Paepe. (2014) Drying behaviour of calcium silicate. Construction and Building Materials 65, pages 507-517.
Crossref
G. Musielak & T. Śliwa. (2012) Fracturing of Clay During Drying: Modelling and Numerical Simulation. Transport in Porous Media 95:2, pages 465-481.
Crossref
Aditya Putranto, Xiao Dong Chen, Sakamon Devahastin, Zongyuan Xiao & Paul A. Webley. (2011) Application of the reaction engineering approach (REA) for modeling intermittent drying under time-varying humidity and temperature. Chemical Engineering Science 66:10, pages 2149-2156.
Crossref
S.J. Kowalski & A. PawŁowski. (2011) Intermittent drying of initially saturated porous materials. Chemical Engineering Science 66:9, pages 1893-1905.
Crossref
S.J. Kowalski. (2010) Control of mechanical processes in drying. Theory and experiment. Chemical Engineering Science 65:2, pages 890-899.
Crossref
Stefan J. Kowalski, Grzegorz Musielak & Jacek Banaszak. (2009) Heat and mass transfer during microwave-convective drying. AIChE Journal, pages NA-NA.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.