Advanced search
Publication Cover
Drying Technology
An International Journal
Volume 25, 2007 - Issue 1
Submit an article Journal homepage
1,336
Views
29
CrossRef citations to date
0
Altmetric
Original Articles

Screw Conveyor Dryer: Process and Equipment Design

S. S. Waje Chemical Engineering Department, Institute of Chemical Technology, University of Mumbai, Mumbai, India
,
B. N. Thorat Chemical Engineering Department, Institute of Chemical Technology, University of Mumbai, Mumbai, IndiaCorrespondence[email protected]
&
A. S. Mujumdar Engineering Science Program & Department of Mechanical Engineering, National University of Singapore, Singapore
Pages 241-247 | Published online: 10 Apr 2007

Citations (29)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (8)

Heron Faggion, Loyse Tussolini, Fábio Bentes Freire, José Teixeira Freire & Everton Fernando Zanoelo. (2016) Mechanisms of heat and mass transfer during drying of mate (Ilex paraguariensis) twigs. Drying Technology 34:4, pages 474-482.
Read now
Chaofei Huo, Ping Feng, Chuigang Fan, Weigang Lin & Wenli Song. (2016) Characterization of transverse mixing in a screw mixer by image analysis. Drying Technology 34:2, pages 194-205.
Read now
Tolga Tunçal & Orhan Uslu. (2014) A Review of Dehydration of Various Industrial Sludges. Drying Technology 32:14, pages 1642-1654.
Read now
Mitsuo Tazaki, Hiroshi Tsuno, Masaki Takaoka & Koh Shimizu. (2011) Modeling of Sludge Behavior in a Steam Dryer. Drying Technology 29:14, pages 1748-1757.
Read now
Tolga Tunçal, SachinV. Jangam & Elçin Güneş. (2011) Abatement of Organic Pollutant Concentrations in Residual Treatment Sludges: A Review of Selected Treatment Technologies Including Drying. Drying Technology 29:14, pages 1601-1610.
Read now
S.V. Jangam, M. Karthikeyan & A.S. Mujumdar. (2011) A Critical Assessment of Industrial Coal Drying Technologies: Role of Energy, Emissions, Risk and Sustainability. Drying Technology 29:4, pages 395-407.
Read now
S. S. Waje, B. N. Thorat & A. S. Mujumdar. (2007) Hydrodynamic Characteristics of a Pilot-Scale Screw Conveyor Dryer. Drying Technology 25:4, pages 609-616.
Read now
S. S. Waje, A. K. Patel, B. N. Thorat & A. S. Mujumdar. (2007) Study of Residence Time Distribution in a Pilot-Scale Screw Conveyor Dryer. Drying Technology 25:1, pages 249-259.
Read now

Articles from other publishers (21)

Lucas Chatre, Marc Bataille, Marie Debacq, Tojonirina Randriamanantena, Jeremy Nos & Florian Herbelet. (2023) Modelling of powder hydrodynamics in a screw reactor. Powder Technology 420, pages 118367.
Crossref
Mohammad-Sadegh Salehi, Maryam Askarishahi, Dalibor Jajcevic, Isabella Aigner, Manuel Zettl & Johannes Khinast. (2023) Steady-state modeling of a new continuous API dryer: Reduced-order model and investigation of dryer performance. International Journal of Pharmaceutics 635, pages 122701.
Crossref
Raja Sekhar Mathangi & Shukadev Mangaraj. (2021) Design and development of an automated soy chaap making machine. Journal of Food Process Engineering 45:6.
Crossref
Claas Steenweg, Astrid Ina Seifert, Nils Böttger & Kerstin Wohlgemuth. (2021) Process Intensification Enabling Continuous Manufacturing Processes Using Modular Continuous Vacuum Screw Filter. Organic Process Research & Development 25:11, pages 2525-2536.
Crossref
Francis Gagnon, André Desbiens, Éric Poulin, Jocelyn Bouchard & Pierre-Philippe Lapointe-Garant. (2021) Grey-box model calibration and validation for a continuous horizontal fluidized bed dryer. Chemical Engineering Research and Design 174, pages 254-266.
Crossref
Paphakorn Pittayachaval & Thanakharn Baothong. (2021) An Effect of Screw Extrusion Parameters on a Pottery Model Formed by a Clay Printing Machine. Materials Science Forum 1046, pages 29-38.
Crossref
Francis Gagnon, Jocelyn Bouchard, André Desbiens, Éric Poulin & Pierre-Philippe Lapointe-Garant. (2021) A dynamic simulation model of a continuous horizontal fluidized bed dryer. Chemical Engineering Science 233, pages 116258.
Crossref
Guangji Hu, Huan Liu, Anber Rana, Jianbing Li, Saeed Bikass, Kasun Hewage & Rehan Sadiq. (2021) Life cycle assessment of low-temperature thermal desorption-based technologies for drill cuttings treatment. Journal of Hazardous Materials 401, pages 123865.
Crossref
Xiaogang Shi, Frederik Ronsse, Jelle Roegiers & Jan G. Pieters. (2019) 3D Eulerian-Eulerian modeling of a screw reactor for biomass thermochemical conversion. Part 1: Solids flow dynamics and back-mixing. Renewable Energy 143, pages 1465-1476.
Crossref
Soumitra Banerjee & Shanker Lal Shrivastava. (2019) Design and development of rapid and environment friendly conditioner for cashew nut processing. Journal of Food Process Engineering 42:4.
Crossref
Peng Zeng & Ziqiang Fang. (2019) Computational Analysis on Material Movement of LS Screw Conveyor. IOP Conference Series: Materials Science and Engineering 562:1, pages 012059.
Crossref
Adrian Schmidt, Hans de Waard, Peter Kleinebudde & Markus Krumme. (2018) Continuous Single-Step Wet Granulation with Integrated in-Barrel-Drying. Pharmaceutical Research 35:8.
Crossref
Ahmad Mustaffar, Anh Phan & Kamelia Boodhoo. (2018) Hybrid heat pipe screw dryer: A novel, continuous and highly energy-efficient drying technology. Chemical Engineering and Processing - Process Intensification 128, pages 199-215.
Crossref
Ozgur Kaplan & Cenk Celik. (2018) An experimental research on woodchip drying using a screw conveyor dryer. Fuel 215, pages 468-473.
Crossref
Alejandro Grimm, Diego Elustondo, Mikko Mäkelä, Markus Segerström, Gunnar Kalén, Laurent Fraikin, Angélique Léonard & Sylvia H. Larsson. (2017) Drying recycled fiber rejects in a bench-scale cyclone: Influence of device geometry and operational parameters on drying mechanisms. Fuel Processing Technology 167, pages 631-640.
Crossref
Fenglei Qi, Theodore J. Heindel & Mark Mba Wright. (2017) Numerical study of particle mixing in a lab-scale screw mixer using the discrete element method. Powder Technology 308, pages 334-345.
Crossref
Yuping Liu, Jianghong Peng, Yasuki Kansha, Masanori Ishizuka, Atsushi Tsutsumi, Dening Jia, Xiaotao T. Bi, C.J. Lim & Shahab Sokhansanj. (2014) Novel fluidized bed dryer for biomass drying. Fuel Processing Technology 122, pages 170-175.
Crossref
Yuping Liu, Muhammad Aziz, Yasuki Kansha, Sankar Bhattacharya & Atsushi Tsutsumi. (2014) Application of the self-heat recuperation technology for energy saving in biomass drying system. Fuel Processing Technology 117, pages 66-74.
Crossref
Yuping Liu, Muhammad Aziz, Yasuki Kansha & Atsushi Tsutsumi. (2013) A novel exergy recuperative drying module and its application for energy-saving drying with superheated steam. Chemical Engineering Science 100, pages 392-401.
Crossref
Ozgur Kaplan & Cenk Celik. (2012) Woodchip drying in a screw conveyor dryer. Journal of Renewable and Sustainable Energy 4:6, pages 063110.
Crossref
Si Zhu Zhou, Chun Xue Liu, Hong Yu Jia, Zhi Peng Lv & Zhong Xiao Sun. (2012) Design and Research of Large-Inclination Screw Conveyor Angle Changing Test Equipment. Advanced Materials Research 544, pages 99-104.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.