Citations (42)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (18)
Chang-Jin Lee & Seung-Won Oh. (2023) Effect of the drying condition on the strength properties of Japanese larch board after vacuum heat treatment. Drying Technology 41:14, pages 2349-2356.
Read now
Read now
Fengze Sun, Kaiwen Chen, Yujing Tan, Hui Peng, Jiali Jiang, Tianyi Zhan & Jianxiong Lyu. (2023) Experimental and numerical assessment of the orthotropic imbibition dynamics of wood. Wood Material Science & Engineering 18:2, pages 607-617.
Read now
Read now
Steve Riley, Jonathan Harrington & Diego Elustondo. (2022) A theoretical analysis of the potential effect of negative pressure in wood drying based on a CT-scanner study. Drying Technology 40:14, pages 2975-2989.
Read now
Read now
Thiago Campos Monteiro, José Tarcísio Lima, Paulo Ricardo Gherardi Hein, José Reinaldo Moreira da Silva, Raul de Abreu Neto & Lucieli Rossi. (2022) Drying kinetics in Eucalyptus urophylla wood: analysis of anisotropy and region of the stem. Drying Technology 40:10, pages 2046-2057.
Read now
Read now
Thomas Metzger. (2019) A personal view on pore network models in drying technology. Drying Technology 37:5, pages 497-512.
Read now
Read now
S. Sandoval-Torres, A. Pérez-Santiago & E. Hernández-Bautista. (2019) Drying model for softwood and moisture patterns measured by magnetic resonance imaging. Drying Technology 37:4, pages 458-467.
Read now
Read now
Jingyao Zhao, Zongying Fu, Xiaoran Jia & Yingchun Cai. (2016) Modeling conventional drying of wood: Inclusion of a moving evaporation interface. Drying Technology 34:5, pages 530-538.
Read now
Read now
Maria Fredriksson & Peter Johansson. (2016) A Method for Determination of Absorption Isotherms at High Relative Humidity Levels: Measurements on Lime-Silica Brick and Norway Spruce (Picea abies (L.) Karst.). Drying Technology 34:1, pages 132-141.
Read now
Read now
RubénA. Ananias, Patricio Perez, Carlos Salinas & Diego Elustondo. (2013) Drying Schedules for Canelo Wood. Drying Technology 31:3, pages 282-285.
Read now
Read now
Zhengbin He, Fei Yang, Songlin Yi & Jianmin Gao. (2012) Effect of Ultrasound Pretreatment on Vacuum Drying of Chinese Catalpa Wood. Drying Technology 30:15, pages 1750-1755.
Read now
Read now
Jimmy Johansson & Jarl-Gunnar Salin. (2011) Application of percolation modelling on end-grain water absorption in aspen (Populus tremula L.). Wood Material Science & Engineering 6:3, pages 112-118.
Read now
Read now
Jarl-Gunnar Salin. (2010) Problems and solutions in wood drying modelling: History and future. Wood Material Science & Engineering 5:2, pages 123-134.
Read now
Read now
Ciprian Lazarescu, Stavros Avramidis & Luiz Oliveira. (2010) Modeling Shrinkage Response to Tensile Stresses in Wood Drying III. Stress—Tensile Set Correlation in Short Pieces of Lumber. Drying Technology 28:6, pages 745-751.
Read now
Read now
Ciprian Lazarescu, Stavros Avramidis & Luiz Oliveira. (2010) Modeling Shrinkage Response to Tensile Stresses in Wood Drying II. Stress–Shrinkage Correlation in Restrained Specimens. Drying Technology 28:2, pages 186-192.
Read now
Read now
Ciprian Lazarescu, Stavros Avramidis & Luiz Oliveira. (2009) Modeling Shrinkage Response to Tensile Stresses in Wood Drying: I. Shrinkage-Moisture Interaction in Stress-Free Specimens. Drying Technology 27:11, pages 1183-1191.
Read now
Read now
Boštjan Lesar, Željko Gorišek & Miha Humar. (2009) Sorption Properties of Wood Impregnated with Boron Compounds, Sodium Chloride and Glucose. Drying Technology 27:1, pages 94-102.
Read now
Read now
C. A. Oyarzun & L. A. Segura. (2009) Design and Construction of Glass Micromodels for the Study of Moisture Transport in Softwoods. Drying Technology 27:1, pages 14-29.
Read now
Read now
Jarl-Gunnar Salin. (2008) Modelling water absorption in wood. Wood Material Science & Engineering 3:3-4, pages 102-108.
Read now
Read now
Articles from other publishers (24)
Bin Huang, Xianke Wang, Lin Chen, Na Su, Litong Liu, Yu Luan, Xinxin Ma, Benhua Fei & Changhua Fang. (2024) Impact of the natural structure of cortex and pith ring on water loss and deformation in bamboo processing. Construction and Building Materials 411, pages 134396.
Crossref
Crossref
Víctor Rosales, Gonzalo Rodríguez-Grau, Carlos Galarce, Claudio Montero, Claudia Alvarado, Lisa Muñoz & Régis Pommier. (2023) Feasibility of Bonding High-Moisture-Content Wood Using Nothofagus chilean Species. Forests 14:12, pages 2386.
Crossref
Crossref
Yipeng Chen, Baokang Dang, Chao Wang, Yuanyuan Wang, Yushan Yang, Ming Liu, Hongjie Bi, Dan Sun, Yingying Li, Jian Li, Xiaoping Shen & Qingfeng Sun. (2023) Intelligent designs from nature: Biomimetic applications in wood technology. Progress in Materials Science 139, pages 101164.
Crossref
Crossref
Abdullah Sadeq, Dennis Heinrich, Swantje Pietsch-Braune & Stefan Heinrich. (2023) Influence of oscillating water content on the structure of biomass pellets. Powder Technology 426, pages 118631.
Crossref
Crossref
Emil Engelund Thybring & Maria Fredriksson. 2023. Springer Handbook of Wood Science and Technology. Springer Handbook of Wood Science and Technology
355
397
.
Magdalena Broda, Morwenna J. Spear, Simon F. Curling & Athanasios Dimitriou. (2022) Effects of Biological and Chemical Degradation on the Properties of Scots Pine—Part II: Wood-Moisture Relations and Viscoelastic Behaviour. Forests 13:9, pages 1390.
Crossref
Crossref
Marion Cocusse, Matteo Rosales, Benjamin MailletRahima Sidi-BoulenouarElisa Julien, Sabine Caré & Philippe Coussot. (2022) Two-step diffusion in cellular hygroscopic (vascular plant-like) materials. Science Advances 8:19.
Crossref
Crossref
Te Ma, Genki Morita, Tetsuya Inagaki & Satoru Tsuchikawa. (2021) Moisture transport dynamics in wood during drying studied by long-wave near-infrared hyperspectral imaging. Cellulose 29:1, pages 133-145.
Crossref
Crossref
Ya. I. Sokolovskyy & O. V. Sinkevych. (2021) The use of cellular automata in modeling the processes of wood drying in a stack. Ukrainian Journal of Information Technology 3:2, pages 39-44.
Crossref
Crossref
Yaroslav Sokolovskyy, Oleksiy Sinkevych, Volodymyr Shymanskyi, Iryna Boretska & Tetiana Samotii. (2021) Construction of Asynchronous Cell-Automatic Model for Research the Thermal Mass Transfer Process. Construction of Asynchronous Cell-Automatic Model for Research the Thermal Mass Transfer Process.
Hélène Penvern, Meng Zhou, Benjamin Maillet, Denis Courtier-Murias, Mario Scheel, Jonathan Perrin, Timm Weitkamp, Sandrine Bardet, Sabine Caré & Philippe Coussot. (2020) How Bound Water Regulates Wood Drying. Physical Review Applied 14:5.
Crossref
Crossref
Bernard S. W. Dawson, Hamish Pearson, Mark O. Kimberley, Bruce Davy & Alan R. Dickson. (2020) Effect of supercritical CO2 treatment and kiln drying on collapse in Eucalyptus nitens wood. European Journal of Wood and Wood Products 78:2, pages 209-217.
Crossref
Crossref
Maria Fredriksson & Emil Engelund Thybring. (2019) On sorption hysteresis in wood: Separating hysteresis in cell wall water and capillary water in the full moisture range. PLOS ONE 14:11, pages e0225111.
Crossref
Crossref
Hamish Pearson, Bernard Dawson, Mark Kimberley & Bruce Davy. (2019) Modelling and optimisation of ceramic and wood dewatering using supercritical CO2. The Journal of Supercritical Fluids 146, pages 15-22.
Crossref
Crossref
S. Florisson, S. Ormarsson & J. Vessby. (2019) A NUMERICAL STUDY OF THE EFFECT OF GREEN-STATE MOISTURE CONTENT ON STRESS DEVELOPMENT IN TIMBER BOARDS DURING DRYING S Florisson, S Ormarsson, J Vessby. Wood and Fiber Science 51:1, pages 41-57.
Crossref
Crossref
Maria Fredriksson & Emil Engelund Thybring. (2018) Scanning or desorption isotherms? Characterising sorption hysteresis of wood. Cellulose 25:8, pages 4477-4485.
Crossref
Crossref
Emil Engelund Thybring, Maija Kymäläinen & Lauri Rautkari. (2017) Experimental techniques for characterising water in wood covering the range from dry to fully water-saturated. Wood Science and Technology 52:2, pages 297-329.
Crossref
Crossref
Takashi Tanaka, Kaori Murakami, Atsushi Kumata & Yasuo Kawai. (2015) Influence of drying temperature on the migration of cesium chloride initially dissolved in the liquid water of sugi (Cryptomeria japonica D. Don) sapwood. Wood Science and Technology 49:5, pages 915-924.
Crossref
Crossref
Wilton Pereira da Silva, Cleide Maria Diniz Pereira da Silva e Silva & Andréa Fernandes Rodrigues. (2014) Comparison between two- and three-dimensional diffusion models to describe wood drying at low temperature. European Journal of Wood and Wood Products 72:4, pages 527-533.
Crossref
Crossref
Wilton Pereira da Silva, Laerson Duarte da Silva, Vera Solange de Oliveira Farias, Cleide Maria Diniz Pereira da Silva e Silva & Jair Stefanini Pereira de Ataíde. (2013) Three-dimensional numerical analysis of water transfer in wood: determination of an expression for the effective mass diffusivity. Wood Science and Technology 47:5, pages 897-912.
Crossref
Crossref
Magdalena Sterley, Stacy Trey, Åsa Lundevall & Sara Olsson. (2012) Influence of cure conditions on the properties of a one-component moisture-cured polyurethane adhesive in the context of green gluing of wood. Journal of Applied Polymer Science 126:S1, pages E297-E304.
Crossref
Crossref
Wilton Pereira da Silva, Laerson Duarte da Silva, Cleide M. D. P. S. e Silva & Pedro L. Nascimento. (2010) Optimization and simulation of drying processes using diffusion models: application to wood drying using forced air at low temperature. Wood Science and Technology 45:4, pages 787-800.
Crossref
Crossref
M. Prat. (2011) Pore Network Models of Drying, Contact Angle, and Film Flows. Chemical Engineering & Technology 34:7, pages 1029-1038.
Crossref
Crossref
T. Metzger & E. Tsotsas. (2010) Network models for capillary porous media: application to drying technology. Chemie Ingenieur Technik 82:6, pages 869-879.
Crossref
Crossref