Advanced search
Publication Cover
Drying Technology
An International Journal
Volume 29, 2011 - Issue 3
Submit an article Journal homepage
207
Views
20
CrossRef citations to date
0
Altmetric
Original Articles

Particle–Gas Mass Transfer in a Spouted Bed with Adjustable Air Inlet

T. Hoffmann Thermal Process Engineering, Otto von Guericke University Magdeburg, Magdeburg, GermanyCorrespondence[email protected]
,
A. Hailu Bedane Thermal Process Engineering, Otto von Guericke University Magdeburg, Magdeburg, Germany
,
M. Peglow Thermal Process Engineering, Otto von Guericke University Magdeburg, Magdeburg, Germany
,
E. Tsotsas Thermal Process Engineering, Otto von Guericke University Magdeburg, Magdeburg, Germany
&
M. Jacob Glatt Engineering GmbH, Weimar, Germany
Pages 257-265 | Published online: 06 Feb 2011

Citations (20)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (3)

J. N. M. Batista & R. Béttega. (2022) Evaluation of the effect of cone geometry on spouted bed fluid dynamics by CFD-DEM simulation. Drying Technology 40:10, pages 2073-2086.
Read now
Maysam Saidi, Hassan Basirat Tabrizi, Goodarz Ahmadi, John R. Grace & C. Jim Lim. (2016) Hydrodynamics of pulsed spouted beds: Effects of pulsation waveform, amplitude, and frequency. Drying Technology 34:13, pages 1546-1557.
Read now
C.H. Zhang, L.X. Huang, P.J. Xie, F. You, Y.L. Zhang & A.S. Mujumdar. (2013) Numerical Simulation of a Spouted Bed Using Computational Fluid Dynamics (CFD). Drying Technology 31:15, pages 1879-1887.
Read now

Articles from other publishers (17)

Subash Reddy Kolan, Rui Wang, Torsten Hoffmann & Evangelos Tsotsas. (2024) Mixing nanoparticles in a ProCell type spouted bed. Powder Technology 431, pages 119129.
Crossref
Subash Reddy Kolan, Rui Wang, Torsten Hoffmann & Evangelos Tsotsas. (2023) Mixing sub-micron particles in a ProCell type spouted bed. Powder Technology 428, pages 118828.
Crossref
Jiali Du, Feng Wu & Xiaoxun Ma. (2023) Progress in research of process intensification of spouted beds: A comprehensive review. Chinese Journal of Chemical Engineering 62, pages 238-260.
Crossref
Xinxin Che, Feng Wu, Haibo Ren, Meng Li & Haowen Zhang. (2023) Numerical study on the effect of longitudinal vortex generator on semi-dry desulfurization process in 3D spouted beds. Advanced Powder Technology 34:3, pages 103961.
Crossref
María J. San José, Sonia Alvarez & Raquel López. (2023) Conical spouted bed combustor to obtain clean energy from avocado waste. Fuel Processing Technology 239, pages 107543.
Crossref
Xabier Sukunza, Roberto Aguado, Aitor Pablos, Mikel Tellabide, Idoia Estiati & Martin Olazar. (2022) Mass transfer in conical spouted beds equipped with internal devices. Powder Technology 410, pages 117850.
Crossref
H.Q. Che, H.G. Wang, L.J. Xu & R.H. Ge. (2022) Investigation of gas-solid heat and mass transfer in a Wurster coater using a scaled CFD-DEM model. Powder Technology 406, pages 117598.
Crossref
Xabier Sukunza, Aitor Pablos, Mikel Tellabide, Idoia Estiati, Fábio Bentes Freire, Roberto Aguado & Martin Olazar. (2022) A model for predicting the performance of a batch fountain confined spouted bed dryer at low and moderate temperatures. Powder Technology 405, pages 117506.
Crossref
María J. San José, Sonia Alvarez & Raquel López. (2021) Drying kinetics of sawdust in conical spouted beds: Influence of geometric and operational factors. Fuel Processing Technology 221, pages 106950.
Crossref
Jesper Aronsson, David Pallarès, Magnus Rydén & Anders Lyngfelt. (2019) Increasing Gas–Solids Mass Transfer in Fluidized Beds by Application of Confined Fluidization—A Feasibility Study. Applied Sciences 9:4, pages 634.
Crossref
Evangelos Tsotsas. 2019. VDI-Wärmeatlas. VDI-Wärmeatlas 1719 1730 .
Rani Puthukulangara Ramachandran, Mohsen Akbarzadeh, Jitendra Paliwal & Stefan Cenkowski. (2017) Computational Fluid Dynamics in Drying Process Modelling—a Technical Review. Food and Bioprocess Technology 11:2, pages 271-292.
Crossref
Evangelos Tsotsas. 2017. Handbuch Vakuumtechnik. Handbuch Vakuumtechnik 1 12 .
Evangelos Tsotsas, Stefan Heinrich, Michael Jacob, Mirko Peglow & Lothar Mörl. 2014. Modern Drying Technology. Modern Drying Technology 85 130 .
Mirko Peglow, Sergiy Antonyuk, Michael Jacob, Stefan Palzer, Stefan Heinrich & Evangelos Tsotsas. 2014. Modern Drying Technology. Modern Drying Technology 295 378 .
Evangelos Tsotsas, Stefan Heinrich, Michael Jacob, Mirko Peglow & Lothar Mörl. 2014. Modern Drying Technology. Modern Drying Technology 85 130 .
Mirko Peglow, Sergiy Antonyuk, Michael Jacob, Stefan Palzer, Stefan Heinrich & Evangelos Tsotsas. 2011. Modern Drying Technology. Modern Drying Technology 295 378 .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.