Advanced search
Publication Cover
Drying Technology
An International Journal
Volume 29, 2011 - Issue 6
Submit an article Journal homepage
774
Views
48
CrossRef citations to date
0
Altmetric
Original Articles

Determination of Moisture Diffusion Coefficient of Concrete at Early Age from Interior Humidity Measurements

Jun Zhang Key Laboratory of Structural Engineering and Vibration of China Education Ministry, Department of Civil Engineering, Tsinghua University, Beijing, ChinaCorrespondence[email protected]
,
Dongwei Hou Key Laboratory of Structural Engineering and Vibration of China Education Ministry, Department of Civil Engineering, Tsinghua University, Beijing, China
,
Yuan Gao Key Laboratory of Structural Engineering and Vibration of China Education Ministry, Department of Civil Engineering, Tsinghua University, Beijing, China
&
Sun Wei Jiangsu Key Laboratory of Construction Materials, School of Materials Science and Engineering, Southeast University, Nanjing, China
Pages 689-696 | Published online: 29 Apr 2011

Citations (48)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (5)

Jiahe Wang, Yongjiang Xie, Xinhua Zhong, Xun Luo & Jiaxuan Wang. (2023) Drying characteristics of concrete under surface low air pressure. Drying Technology 41:8, pages 1252-1267.
Read now
Jiahe Wang, Yongjiang Xie, Xinhua Zhong & Zhongwei Feng. (2022) Surface drying characteristic of early-age concrete considering cement hydration process. Drying Technology 40:15, pages 3084-3099.
Read now
Jun Zhang, Jiahe Wang & Xiaoping Ding. (2018) Test and simulation on moisture flow in earlyage concrete under drying. Drying Technology 36:2, pages 221-233.
Read now
A.J. J. van der Zanden & A. Taher. (2014) A Gravitational Procedure to Measure the Diffusion Coefficient of Water in Porous Materials: A Case Study on Concrete. Drying Technology 32:6, pages 708-712.
Read now
Jun Zhang, Yuan Gao, Yudong Han & Wei Sun. (2012) Shrinkage and Interior Humidity of Concrete under Dry–Wet Cycles. Drying Technology 30:6, pages 583-596.
Read now

Articles from other publishers (43)

Guoyi Zhang, Ye Tian, Ruoyi Zhao, Yu Liu, Yinzhe Shao, Huiping Feng, Nanguo Jin, Xianyu Jin, Hongxiao Wu, Dongming Yan, Zheng Zhou, Shenshan Wang, Zhiqiang Zhang, Bei Li & Jiaxi Wang. (2023) Dynamic self-balanced electrochemical model for non-uniform corrosion of steel reinforcement in concrete under combined effects of heat-moisture-chlorine-oxygen. Journal of Building Engineering 80, pages 108117.
Crossref
Jiahe Wang, Yongjiang Xie, Xinhua Zhong & Yanan Qu. (2022) Humidity field in early-age shotcrete with alkaline and alkali-free accelerators. Mechanics of Time-Dependent Materials 27:2, pages 583-603.
Crossref
Chuyuan Wen, Dejian Shen, Zhizhuo Feng, Ci Liu & Shucheng Deng. (2022) Relationship between internal relative humidity and autogenous shrinkage of early‐age concrete containing prewetted lightweight aggregates. Structural Concrete 24:3, pages 4110-4125.
Crossref
Ci LiuDejian Shen, Ming Li, Chengcai LiJiacheng KangMingliang Wang. (2023) Investigation on the Internal Relative Humidity of Superabsorbent Polymer–Modified Concrete Exposed to Various Ambient Humidities at Early Age. Journal of Materials in Civil Engineering 35:4.
Crossref
Bodol Momha Merlin, Djopkop Kouanang Landry, Amba Jean Chills, Nkongho Anyi Joseph, Zoa Ambassa & Nzengwa Robert. (2023) Investigation of differential shrinkage stresses in a revolution shell structure due to the evolving parameters of concrete. Curved and Layered Structures 10:1.
Crossref
Dejian ShenDejian Shen. 2023. Cracking Control on Early-Age Concrete Through Internal Curing. Cracking Control on Early-Age Concrete Through Internal Curing 51 103 .
Dejian ShenDejian Shen. 2023. Cracking Control on Early-Age Concrete Through Internal Curing. Cracking Control on Early-Age Concrete Through Internal Curing 1 50 .
Qiuwei Yang, Yun Sun & Xi Peng. (2022) Experimental Study on Mechanical Properties of Concrete at Super-Early Age. Materials 15:21, pages 7582.
Crossref
Hyeon Woo Park, V. M. Balasubramaniam, Abigail B. Snyder & J. A. Sekhar. (2022) Influence of Superheated Steam Temperature and Moisture Exchange on the Inactivation of Geobacillus stearothermophilus Spores in Wheat Flour-Coated Surfaces. Food and Bioprocess Technology 15:7, pages 1550-1562.
Crossref
Mohammad Kamran & Kaustav Sarkar. (2022) Temperature and RH of normal concrete and mortar subjected to drying in an indoor residential environment. Advances in Cement Research 34:4, pages 175-186.
Crossref
Shubham Kumar Verma, Y. Anand, Navin Gupta, B.B. Jindal, V.V. Tyagi & S. Anand. (2022) Hygrothermal dynamics for developing energy-efficient buildings: Building materials and ventilation system considerations. Energy and Buildings 260, pages 111932.
Crossref
Lei Ma, Qing Zhang, Zijian Jia, Chao Liu, Zhicong Deng & Yamei Zhang. (2022) Effect of drying environment on mechanical properties, internal RH and pore structure of 3D printed concrete. Construction and Building Materials 315, pages 125731.
Crossref
Hua Rong, Wei Dong, Wenyan Yuan & Xiangming Zhou. (2021) An improved ring test to assess cracking resistance of concrete under restrained shrinkage. Theoretical and Applied Fracture Mechanics 113, pages 102976.
Crossref
Kun Zhu, Wei Jiang, Long Yu, Peilu Guo & Zhenghong Yang. (2021) Deformation analysis and failure prediction of bonding mortar in external thermal insulation cladding system (ETICS) by coupled multi physical fields method. Construction and Building Materials 278, pages 122017.
Crossref
Hua Rong, Wei Dong, Xiaoyu Zhao & Xiangming Zhou. (2021) Investigation on multi-cracks initiation and propagation of fiber reinforced concrete in restrained shrinkage ring tests. Theoretical and Applied Fracture Mechanics 111, pages 102856.
Crossref
Dejian Shen, Ci Liu, Mingliang Wang, Xingcan Jin & Hui Tang. (2020) Prediction model for internal relative humidity in early-age concrete under different curing humidity conditions. Construction and Building Materials 265, pages 119987.
Crossref
Chiwon Song, Geuntae Hong & Seongcheol Choi. (2020) Modeling autogenous shrinkage of hydrating cement paste by estimating the meniscus radius. Construction and Building Materials 257, pages 119521.
Crossref
Lena Mengel, Hans-Werner Krauss & Dirk Lowke. (2020) Water transport through cracks in plain and reinforced concrete – Influencing factors and open questions. Construction and Building Materials 254, pages 118990.
Crossref
Weijie You, Fengping Zhang, Yue Huang, Mi Gao, Chengqian Wen & Guotao Yang. (2020) A coupled hygro-thermo-mechanical model for the evolution of saturation in early-age concrete. International Journal of Heat and Mass Transfer 156, pages 119817.
Crossref
. (2020) Advanced Calibration of Historic Apparent Moisture Diffusivity Models for Mortar. ACI Materials Journal 117:2.
Crossref
Domenico Giaccone, Ulderico Santamaria & Marco Corradi. (2020) An Experimental Study on the Effect of Water on Historic Brickwork Masonry. Heritage 3:1, pages 29-46.
Crossref
Wei Cui, Yanjun Luo & Shuang Peng. (2020) Early-Age Cracking Analysis of a HVFA Concrete Structure Based on Thermo-Hygro-Mechanical Modeling Combined with XFEM. Advances in Materials Science and Engineering 2020, pages 1-13.
Crossref
Shuo Chen, Haitao Zhao, Yu Chen, Donghui Huang, Yuzhi Chen & Xiaodong Chen. (2020) Experimental study on interior relative humidity development in early-age concrete mixed with shrinkage-reducing and expansive admixtures. Construction and Building Materials 232, pages 117204.
Crossref
Merlin Simo-Tagne, Macmanus Chinenye Ndukwu & Yann Rogaume. (2019) Modelling and numerical simulation of hygrothermal transfer through a building wall for locations subjected to outdoor conditions in Sub-Saharan Africa. Journal of Building Engineering 26, pages 100901.
Crossref
Shuai-Qi Tian, Ke Wang, Li-Wu Fan, Zi-Tao Yu & Jian Ge. (2019) Effects of sample length on the transient measurement results of water vapor diffusion coefficient of porous building materials: A case study of autoclave aerated concrete (AAC) with various porosities. International Journal of Heat and Mass Transfer 135, pages 209-219.
Crossref
Wei Dong, Xiaoyu Zhao, Xiangming Zhou & Wenyan Yuan. (2019) Effects of moisture gradient of concrete on fracture process in restrained concrete rings: Experimental and numerical. Engineering Fracture Mechanics 208, pages 189-208.
Crossref
Wei Zhou, Tianqi Qi, Xinghong Liu, Shuhan Yang & Chuqiao Feng. (2019) A meso-scale analysis of the hygro-thermo-chemical characteristics of early-age concrete. International Journal of Heat and Mass Transfer 129, pages 690-706.
Crossref
Maha A. Abusogi & Xiaosheng Wei. (2018) Experimental and Numerical Analysis of Restrained Early Age Cracking based on Electrical Resistivity Using Eccentric Sample. Journal of Wuhan University of Technology-Mater. Sci. Ed. 33:6, pages 1472-1480.
Crossref
Wojciech Kubissa, Michał A. Glinicki & Mariusz Dąbrowski. (2018) Permeability testing of radiation shielding concrete manufactured at industrial scale. Materials and Structures 51:4.
Crossref
Hamza Samouh, Emmanuel Rozière & Ahmed Loukili. (2018) Shape effect on drying behavior of cement-based materials: Mechanisms and numerical analysis. Cement and Concrete Research 110, pages 42-51.
Crossref
Jun Zhang, Jiahe Wang & Xiaoping Ding. (2018) Calculation of shrinkage stress in concrete structures with impact of internal curing. Engineering Fracture Mechanics 192, pages 54-76.
Crossref
Jiahe Wang, Jun Zhang, Xiaoping Ding & Jiajia Zhang. (2017) Effect of cementitious permanent formwork on moisture field of internal-cured concrete under drying. Mechanics of Time-Dependent Materials 22:1, pages 95-127.
Crossref
Wei Zhou, Tianqi Qi, Xinghong Liu, Chuqiao Feng & Shuhan Yang. (2017) A hygro-thermo-chemical analysis of concrete at an early age and beyond under dry-wet conditions based on a fixed model. International Journal of Heat and Mass Transfer 115, pages 488-499.
Crossref
Jun Zhang, Yuan Gao, Yudong Han & Jiahe Wang. (2015) Evaluation of shrinkage induced cracking in early age concrete: From ring test to circular column. International Journal of Damage Mechanics 26:5, pages 771-797.
Crossref
Samaila Muazu Bawa, Xiaosheng Wei & Lei Wang. (2016) The relationship between electrical resistivity of cement paste and its restrained shrinkage crack with the aid of novel apparatus and ANSYS simulation. KSCE Journal of Civil Engineering 21:1, pages 339-345.
Crossref
Ippei Maruyama, Hiroshi Sasano & Mao Lin. (2016) Impact of aggregate properties on the development of shrinkage-induced cracking in concrete under restraint conditions. Cement and Concrete Research 85, pages 82-101.
Crossref
Jun Zhang, Jiahe Wang & Yuan Gao. (2016) Moisture movement in early-age concrete under cement hydration and environmental drying. Magazine of Concrete Research 68:8, pages 391-408.
Crossref
José L. GranjaMiguel AzenhaChristoph de SousaRui FariaJoaquim Barros. (2014) Hygrometric Assessment of Internal Relative Humidity in Concrete: Practical Application Issues. Journal of Advanced Concrete Technology 12:8, pages 250-265.
Crossref
Shui-Long Shen, Dong-Wei Hou, Jian-Li Zhao, Suksun Horpibulsuk & Zhen-Yu Yin. (2014) Assessment of internal forces for intermediate anchorage zone of post-tensioned concrete structure. Construction and Building Materials 64, pages 370-378.
Crossref
Yuan Gao, Jun Zhang & Yiming Luosun. (2013) Shrinkage stress in concrete under dry–wet cycles: an example with concrete column. Mechanics of Time-Dependent Materials 18:1, pages 229-252.
Crossref
Jun ZhangDongwei HouYuan Gao. (2013) Calculation of Shrinkage Stress in Early-Age Concrete Pavements. I: Calculation of Shrinkage Strain. Journal of Transportation Engineering 139:10, pages 961-970.
Crossref
Yuan Gao, Jun Zhang & Po Han. (2013) Determination of stress relaxation parameters of concrete in tension at early-age by ring test. Construction and Building Materials 41, pages 152-164.
Crossref
Jun ZhangYuan GaoYudong Han. (2012) Interior Humidity of Concrete under Dry-Wet Cycles. Journal of Materials in Civil Engineering 24:3, pages 289-298.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.