Advanced search
Publication Cover
Drying Technology
An International Journal
Volume 33, 2015 - Issue 7
Submit an article Journal homepage
679
Views
32
CrossRef citations to date
0
Altmetric
Original Articles

CFD Modeling of Air Flow on Wall Deposition in Different Spray Dryer Geometries

Samaneh KeshaniInstitute of Fuel Cell Technology, University Kebangsaan Malaysia, Bangi, Malaysia;Institute of Tropical Forestry and Forest Products, University Putra Malaysia, Selangor, MalaysiaCorrespondence[email protected]
,
Mohammad Hossein MontazeriDepartment of Mechanical Engineering, Shiraz University, Shiraz, Iran
,
Wan Ramli Wan DaudInstitute of Fuel Cell Technology, University Kebangsaan Malaysia, Bangi, Malaysia;Department of Chemical and Process Engineering, Faculty of Engineering, University Kebangsaan Malaysia, Bangi, Malaysia
&
M. Mohsen NourouziInstitute of Tropical Forestry and Forest Products, University Putra Malaysia, Selangor, Malaysia;Islamic Azad University Isfahan, Khorasgan Branch, Isfahan, Iran
Pages 784-795 | Published online: 01 Apr 2015

Citations (32)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (6)

Sara Moradi Maryamnegari, Ali Ashrafizadeh & Maciej Jaskulski. (2023) A novel approach for the reduction of powder deposition in spray drying chambers. Drying Technology 41:6, pages 1017-1030.
Read now
Haileeyesus Habtegebriel, Dintwa Edward, Oboetswe Motsamai, Michael Wawire, Eyassu Seifu & Sila Daniel. (2021) The potential of computational fluid dynamics simulation to investigate the relation between quality parameters and outlet temperature during spray drying of camel milk. Drying Technology 39:13, pages 2010-2024.
Read now
Xing Huang, Mona Edrisi Sormoli & Timothy A. G. Langrish. (2018) Review of some common commercial and noncommercial lab-scale spray dryers and preliminary tests for a prototype new spray dryer. Drying Technology 36:15, pages 1900-1912.
Read now
Mustafa Aktaş, Adnan Sözen, Ali Amini & Ataollah Khanlari. (2017) Experimental analysis and CFD simulation of infrared apricot dryer with heat recovery. Drying Technology 35:6, pages 766-783.
Read now
Pierre Schuck, Romain Jeantet, Bhesh Bhandari, Xiao Dong Chen, Ítalo Tuler Perrone, Antônio Fernandes de Carvalho, Mark Fenelon & Phil Kelly. (2016) Recent advances in spray drying relevant to the dairy industry: A comprehensive critical review. Drying Technology 34:15, pages 1773-1790.
Read now
M. Jaskulski, P. Wawrzyniak & I. Zbiciński. (2015) CFD Model of Particle Agglomeration in Spray Drying. Drying Technology 33:15-16, pages 1971-1980.
Read now

Articles from other publishers (26)

Jairo Andrés Gutiérrez Suárez, Carlos Humberto Galeano Urueña & Alexánder Gómez Mejía. (2023) Adaptive Mesh Refinement Strategies for Cost-Effective Eddy-Resolving Transient Simulations of Spray Dryers. ChemEngineering 7:5, pages 100.
Crossref
Jae Woo Sim, Haeyeon Lee, Sungwon Jo, Sanghyun Oh, Sungil Kim & Dong Rip Kim. (2023) Increasing energy saving of pilot-scale spray dryers with enhanced yield by low-adhesive surfaces. Case Studies in Thermal Engineering 49, pages 103218.
Crossref
Pengdi Cui, Yang Yu, Qilong Xue, Zhouyou Wu, Kunhong Miao, Changqing Liu, Lijun Zhao & Zheng Li. (2023) Numerical simulation and optimization of Lonicerae Japonicae Flos extract spray drying process based on temperature field verification and deep reinforcement learning. Journal of Food Engineering 345, pages 111425.
Crossref
Sara Moradi Maryamnegari, Ali Ashrafizadeh, Egbert Baake & Mattia Guglielmi. (2023) Effects of thermal boundary conditions on the performance of spray dryers. Journal of Food Engineering 338, pages 111250.
Crossref
Ali M. Sefidan, Mathieu Sellier, James N. Hewett, Ayoub Abdollahi, Geoff R. Willmott & Sid M. Becker. (2022) Numerical model to study the statistics of whole milk spray drying. Powder Technology 411, pages 117923.
Crossref
Vivek V. Ranade & Ranjeet P. Utikar. 2022. Multiphase Flows for Process Industries. Multiphase Flows for Process Industries 589 632 .
Somayeh Jafari, Hassan Khaleghi & Reza Maddahian. (2022) A new approach to account for porosity variations on the solidification of a skim milk droplet. Chemical Engineering Science 248, pages 117080.
Crossref
Jairo Andrés Gutiérrez Suárez, Alexánder Gómez Mejía & Carlos Humberto Galeano Urueña. (2021) Low-Cost Eddy-Resolving Simulation in the Near-Field of an Annular Swirling Jet for Spray Drying Applications. ChemEngineering 5:4, pages 80.
Crossref
Umair Jamil Ur Rahman & Artur K. Pozarlik. (2021) Numerical Study and Experimental Validation of Skim Milk Drying in a Process Intensified Counter Flow Spray Dryer. Energies 14:16, pages 4974.
Crossref
Sho Mitsuduka, Makoto Takano, Shinjiro Shinkawa, Haruyuki Funahashi, Yoshifumi Ogami & Koichiro Yoshioka. (2021) Evaluation of Deposition of Whey Powder in Spray Dryer Using CFD SimulationCFDシミュレーションによる噴霧乾燥機内のホエイ粉の付着堆積の評価. Nippon Shokuhin Kagaku Kogaku Kaishi 68:2, pages 65-76.
Crossref
Peng Wang, Gehan Liu, Shangmin Ao, Dongliang Sun, Bo Yu & Xiaohua Wu. (2021) Numerical investigation of airflow and heat transfer characteristics and optimal design of the American ginseng drying room. Applied Thermal Engineering 183, pages 115885.
Crossref
Timothy A. G. Langrish, James Harrington, Xing Huang & Chao Zhong. (2020) Using CFD Simulations to Guide the Development of a New Spray Dryer Design. Processes 8:8, pages 932.
Crossref
Hande Özge Güler, Adnan Sözen, Azim Doğuş Tuncer, Faraz Afshari, Ataollah Khanlari, Ceylin Şirin & Afsin Gungor. (2020) Experimental and CFD survey of indirect solar dryer modified with low-cost iron mesh. Solar Energy 197, pages 371-384.
Crossref
Mónica P. A. Ferreira, João Pedro Martins, Jouni Hirvonen & Hélder A. Santos. 2020. Nanotechnology for Oral Drug Delivery. Nanotechnology for Oral Drug Delivery 253 284 .
Ahmad Ziaee, Ahmad B. Albadarin, Luis Padrela, Tim Femmer, Emmet O'Reilly & Gavin Walker. (2019) Spray drying of pharmaceuticals and biopharmaceuticals: Critical parameters and experimental process optimization approaches. European Journal of Pharmaceutical Sciences 127, pages 300-318.
Crossref
Yueming Liu, Jing Yu, Liang Chen & Sumin Jin. (2018) Theoretical investigation and experimental verification of a mathematical model for counter-flow spray separation tower. International Journal of Heat and Mass Transfer 120, pages 316-327.
Crossref
Rani Puthukulangara Ramachandran, Mohsen Akbarzadeh, Jitendra Paliwal & Stefan Cenkowski. (2017) Computational Fluid Dynamics in Drying Process Modelling—a Technical Review. Food and Bioprocess Technology 11:2, pages 271-292.
Crossref
Mi-Jeong Park, Sang-Bum Kim, Sook-Jin Kim, Kyung-Mi Kim, Song-Yi Choi, Mi Chang & Gi-Chang Kim. (2017) Optimization of spray drying conditions of soft persimmon and milk mixture using response surface methodology. Korean Journal of Food Preservation 24:7, pages 957-964.
Crossref
Pengfei Zhang, Pengpeng Wu, Qi Zhang, Zhenzhen Shi, Mingjun Wei & Majid Jaberi-Douraki. (2017) Optimization of feed thickness on distribution of airflow velocity in belt dryer using computational fluid dynamics. Energy Procedia 142, pages 1595-1602.
Crossref
Pengfei Zhang, Yanbin Mu, Zhenzhen Shi, Qi Zhang, Mingjun Wei & Majid Jaberi-Douraki. (2017) Computational fluid dynamic analysis of airflow in belt dryer: effects of conveyor position on airflow distribution. Energy Procedia 142, pages 1367-1374.
Crossref
Gbenga A. Olatunde & Griffiths G. Atungulu. (2017) Potential of turbulence interference in rough rice bin drying and storage systems fitted with cabling technology. Biosystems Engineering 163, pages 1-14.
Crossref
Xiaojing Wang, Yuankui Li, Dongyun Ma, Yaqian Liu, Yiping Huang & Fengxiang Qin. (2017) Hydrodynamics of Continuous Spiral Dryer with Rotatory Conical Sleeves: Experiments versus CFD Simulations. Transactions of Tianjin University 23:6, pages 511-520.
Crossref
Yi Liu, Yong Luo, Guang-Wen Chu, Jiang-Zhou Luo, Moses Arowo & Jian-Feng Chen. (2017) 3D numerical simulation of a rotating packed bed with structured stainless steel wire mesh packing. Chemical Engineering Science 170, pages 365-377.
Crossref
Meena Shrestha, Thao M. Ho & Bhesh R. Bhandari. (2017) Encapsulation of tea tree oil by amorphous beta-cyclodextrin powder. Food Chemistry 221, pages 1474-1483.
Crossref
Víctor Francia, Luis Martín, Andrew E. Bayly & Mark J.H. Simmons. (2017) Agglomeration during spray drying: Airborne clusters or breakage at the walls?. Chemical Engineering Science 162, pages 284-299.
Crossref
Samaneh Keshani, Wan Ramli Wan Daud, M.M. Nourouzi, Farideh Namvar & Mostafa Ghasemi. (2015) Spray drying: An overview on wall deposition, process and modeling. Journal of Food Engineering 146, pages 152-162.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.