Citations (47)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (19)
Kal Kalayanamitra & Rittichai Assawarachan. (2022) Modeling the Drying of Coconut Residue in Fluidized Bed Dryer. Journal of Culinary Science & Technology 0:0, pages 1-15.
Read now
Read now
R.G. Bait, S.B. Pawar, A.N. Banerjee, A.S. Mujumdar & B.N. Thorat. (2011) Mechanically Agitated Fluidized Bed Drying of Cohesive Particles at Low Air Velocity. Drying Technology 29:7, pages 808-818.
Read now
Read now
Marzouk Benali & Tadeusz Kudra. (2010) Process Intensification for Drying and Dewatering. Drying Technology 28:10, pages 1127-1135.
Read now
Read now
Zhanyong Li, Weiguang Su, Zhonghua Wu, Ruifang Wang & A. S. Mujumdar. (2009) Investigation of Flow Behaviors and Bubble Characteristics of a Pulse Fluidized Bed via CFD Modeling. Drying Technology 28:1, pages 78-93.
Read now
Read now
Marcello Nitz & OsvaldirP. Taranto. (2009) Drying of a Porous Material in a Pulsed Fluid Bed Dryer: The Influences of Temperature, Frequency of Pulsation, and Air Flow Rate. Drying Technology 27:2, pages 212-219.
Read now
Read now
Alejandro Reyes, Ricardo Vega, Rubén Bustos & Carmen Araneda. (2008) Effect of Processing Conditions on Drying Kinetics and Particle Microstructure of Carrot. Drying Technology 26:10, pages 1272-1285.
Read now
Read now
A. Reyes, R. Vega & G. García. (2008) Drying Sawdust in a Pulsed Fluidized Bed. Drying Technology 26:4, pages 476-486.
Read now
Read now
Alejandro Reyes, Nicolás Herrera & Ricardo Vega. (2007) Drying Suspensions in a Pulsed Fluidized Bed of Inert Particles. Drying Technology 26:1, pages 122-131.
Read now
Read now
A. Reyes, P. Moyano & J. Paz. (2007) Drying of Potato Slices in a Pulsed Fluidized Bed. Drying Technology 25:4, pages 581-590.
Read now
Read now
A. Reyes, C. Campos & R. Vega. (2006) Drying of Turnip Seeds with Microwaves in Fixed and Pulsed Fluidized Beds. Drying Technology 24:11, pages 1469-1480.
Read now
Read now
Zbigniew Gawrzyński & Bartosz Pieczaba. (2006) Hydrodynamics of the Pulsed Fluid Bed with Cyclically Relocated Gas Stream with Lengthwise Pulsation. Drying Technology 24:9, pages 1133-1137.
Read now
Read now
G. Efremov & T. Kudra. (2004) Calculation of the Effective Diffusion Coefficients by Applying A Quasi-Stationary Equation for Drying Kinetics. Drying Technology 22:10, pages 2273-2279.
Read now
Read now
Arun S. Mujumdar. (2004) Research and Development in Drying: Recent Trends and Future Prospects. Drying Technology 22:1-2, pages 1-26.
Read now
Read now
Md. Raisul Islam, J. C. Ho & A. S. Mujumdar. (2003) Convective Drying with Time-Varying Heat Input: Simulation Results. Drying Technology 21:7, pages 1333-1356.
Read now
Read now
T. Kudra & G. I. Efremov. (2003) A Quasi-stationary Approach to Drying Kinetics of Fluidized Particulate Materials. Drying Technology 21:6, pages 1077-1090.
Read now
Read now
T. Kudra, Z. Gawrzynski, R. Glaser, J. Stanislawski & M. Poirier. (2002) DRYING OF PULP AND PAPER SLUDGE IN A PULSED FLUID BED DRYER. Drying Technology 20:4-5, pages 917-933.
Read now
Read now
Y.
K. Pan, J.
G. Li, L.
J. Zhao, W.
H. Ye, A.
S. Mujumdar & T. Kudra. (2001) PERFORMANCE CHARACTERISTICS OF THE VIBRATED FLUID BED OF INERT PARTICLES FOR DRYING OF LIQUID FEEDS. Drying Technology 19:8, pages 2003-2018.
Read now
Read now
Wijitha Senadeera, BheshR. Bhandari, Gordon Young & Bandu Wijesinghe. (2000) METHODS FOR EFFECTIVE FLUIDIZATION OF PARTICULATE FOOD MATERIALS. Drying Technology 18:7, pages 1537-1557.
Read now
Read now
Z. Gawrzynski, R. Glaser & T. Kudra. (1999) DRYING OF POWDERY MATERIALS IN A PULSED FLUID BED DRYER. Drying Technology 17:7-8, pages 1523-1532.
Read now
Read now
Articles from other publishers (28)
Chen Li, Carter Blocka & Lifeng Zhang. (2022) Experimental investigation on drying performance of pharmaceutical granules in a pulsation‐assisted fluidized bed dryer. The Canadian Journal of Chemical Engineering 100:9, pages 2608-2622.
Crossref
Crossref
Zhizhong Ding, Shashank S. Tiwari, Mayank Tyagi & Krishnaswamy Nandakumar. (2021) Computational fluid dynamic simulations of regular bubble patterns in pulsed fluidized beds using a two‐fluid model. The Canadian Journal of Chemical Engineering 100:2, pages 405-422.
Crossref
Crossref
Antipov Sergey, Klyuchnikov Andrey, Pribytkov Aleksey & Rudoy Dmitriy. 2022. XIV International Scientific Conference “INTERAGROMASH 2021". XIV International Scientific Conference “INTERAGROMASH 2021"
33
40
.
Pham Quang Phu & Bui Trung Thanh. 2021. Proceedings of the 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2020). Proceedings of the 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2020)
721
730
.
Dening Jia, Xiaotao Bi, C. Jim Lim, Shahab Sokhansanj & Atsushi Tsutsumi. (2017) Gas-solid mixing and mass transfer in a tapered fluidized bed of biomass with pulsed gas flow. Powder Technology 316, pages 373-387.
Crossref
Crossref
Liang Dong, Enhui Zhou, Liping Peng, Chenlong Duan, Yuemin Zhao, Zhenfu Luo & Qingxia Liu. (2017) Analysis of interaction between bubbles and particles in a dense gas-vibro fluidized bed. Chemical Engineering Science 161, pages 265-273.
Crossref
Crossref
Hong-Wei Li & Hao Guo. (2017) Analysis of drying characteristics in mixed pulsed rectangle fluidized beds. Powder Technology 308, pages 451-460.
Crossref
Crossref
Dening Jia, Océane Cathary, Jianghong Peng, Xiaotao Bi, C. Jim Lim, Shahab Sokhansanj, Yuping Liu, Ruixu Wang & Atsushi Tsutsumi. (2015) Fluidization and drying of biomass particles in a vibrating fluidized bed with pulsed gas flow. Fuel Processing Technology 138, pages 471-482.
Crossref
Crossref
Robert Driscoll & George Srzednicki. 2014. Food Engineering Handbook. Food Engineering Handbook
437
488
.
Y. Vega-Valencia, M.T. Cruz y Victoria, M.G. Vizcarra Mendoza & I. Anaya Sosa. (2014)
Intermittent Drying of Nopal (
O
puntia Ficus Indica
) in a Fluidized Bed Pilot Dryer Adapted with Revolving Chambers
. Journal of Food Process Engineering 37:3, pages 211-219.
Crossref
Crossref
Hamed Khosravi Bizhaem & Hassan Basirat Tabrizi. (2013) Experimental study on hydrodynamic characteristics of gas–solid pulsed fluidized bed. Powder Technology 237, pages 14-23.
Crossref
Crossref
Bashar Hadi, J. Ruud van Ommen & Marc-Olivier Coppens. (2011) Enhanced Particle Mixing in Pulsed Fluidized Beds and the Effect of Internals. Industrial & Engineering Chemistry Research 51:4, pages 1713-1720.
Crossref
Crossref
Hamid Reza GAZOR & Ahmad MOHSENIMANESH. (2010) Modelling the drying kinetics of canola in fluidised bed dryer. Czech Journal of Food Sciences 28:6, pages 531-537.
Crossref
Crossref
L. F. G. de Souza, M. Nitz, P. A. Lima & O. P. Taranto. (2010) Drying of Sodium Acetate in a Pulsed Fluid Bed Dryer. Chemical Engineering & Technology 33:12, pages 2015-2020.
Crossref
Crossref
Lin-Feng Wu, Ming-Quan Geng & Xue-Ying Xu. (2010) Optimization design of water jetting Pile Extractor by FEM. Optimization design of water jetting Pile Extractor by FEM.
Michael C. FlickingerChung Lim Law & Arun S. Mujumdar. 2009. Encyclopedia of Industrial Biotechnology. Encyclopedia of Industrial Biotechnology
1
17
.
Tadeusz Kudra & Arun Mujumdar. 2009. Advanced Drying Technologies, Second Edition. Advanced Drying Technologies, Second Edition
129
141
.
Tadeusz Kudra & Arun Mujumdar. 2009. Advanced Drying Technologies, Second Edition. Advanced Drying Technologies, Second Edition
77
88
.
Ali AkhavanJ. Ruud van OmmenJohn NijenhuisXiao S. WangMarc-Olivier CoppensMartin J. Rhodes. (2008) Improved Drying in a Pulsation-Assisted Fluidized Bed. Industrial & Engineering Chemistry Research 48:1, pages 302-309.
Crossref
Crossref
German Efremov, Marek Markowski, Ireneusz Białobrzewski & Magdalena Zielinska. (2008) Approach to calculation time-dependent moisture diffusivity for thin layered biological materials. International Communications in Heat and Mass Transfer 35:9, pages 1069-1072.
Crossref
Crossref
Marcello Nitz & Osvaldir Pereira Taranto. (2008) Film coating of theophylline pellets in a pulsed fluid bed coater. Chemical Engineering and Processing: Process Intensification 47:8, pages 1412-1419.
Crossref
Crossref
David M. King, Joseph A. SpencerIIII, Xinhua Liang, Luis F. Hakim & Alan W. Weimer. (2007) Atomic layer deposition on particles using a fluidized bed reactor with in situ mass spectrometry. Surface and Coatings Technology 201:22-23, pages 9163-9171.
Crossref
Crossref
Marcello Nitz & Osvaldir Pereira Taranto. (2007) Drying of beans in a pulsed fluid bed dryer: Drying kinetics, fluid-dynamic study and comparisons with conventional fluidization. Journal of Food Engineering 80:1, pages 249-256.
Crossref
Crossref
M. C. B. Ambrosio-Ugri & O. P. Taranto. (2007) Drying in the rotating-pulsed fluidized bed. Brazilian Journal of Chemical Engineering 24:1, pages 95-100.
Crossref
Crossref
Somkiat Prachayawarakorn, Warunee Tia, Korakot Poopaiboon & Somchart Soponronnarit. (2005) Comparison of performances of pulsed and conventional fluidised-bed dryers. Journal of Stored Products Research 41:5, pages 479-497.
Crossref
Crossref
Zhanyong Li, Noriyuki Kobayashi, Seiichi Deguchi & Masanobu Hasatani. (2004) Investigation on the Drying Kinetics in a Pulsed Fluidized Bed. JOURNAL OF CHEMICAL ENGINEERING OF JAPAN 37:9, pages 1179-1182.
Crossref
Crossref
K.J. Chua, A.S. Mujumdar & S.K. Chou. (2003) Intermittent drying of bioproducts––an overview. Bioresource Technology 90:3, pages 285-295.
Crossref
Crossref
E.R.G. Eckert, R.J. Goldstein, W.E. Ibele, T.W. Simon, T.H. Kuehn, P.J. Strykowski, K.K. Tamma, A. Bar-Cohen, J.V.R. Heberlein, J.H. Davidson, J. Bischof, F. Kulacki & U. Kortshagen. (2000) Heat transfer — a review of 1996 literature. International Journal of Heat and Mass Transfer 43:8, pages 1273-1371.
Crossref
Crossref