Stefan Helber, Carolin Kellenbrink & Insa Südbeck. (2023) Evaluation of stochastic flow lines with provisioning of auxiliary material. OR Spectrum.
Crossref
Salvatore Scrivano, Barış Tan & Tullio Tolio. (2023) Continuous-flow simulation of manufacturing systems with assembly/disassembly machines, multiple loops and general layout. Journal of Manufacturing Systems 69, pages 103-118.
Crossref
Theodor Freiheit. (2023) A discrete state Markov chain model and decomposition solution method for the transient behaviour of buffered long serial transfer lines. Journal of Manufacturing Systems 68, pages 493-507.
Crossref
M.C. Magnanini & T. Tolio. (2023) A Markovian model of asynchronous multi-stage manufacturing lines fabricating discrete parts. Journal of Manufacturing Systems 68, pages 325-337.
Crossref
Konstantinos S. Boulas, Georgios D. Dounias & Chrissoleon T. Papadopoulos. (2021) A hybrid evolutionary algorithm approach for estimating the throughput of short reliable approximately balanced production lines. Journal of Intelligent Manufacturing 34:2, pages 823-852.
Crossref
Kuo-Hao Chang & Cheng-Chieh Huang. (2023) An Interactive Two-Stage Framework for Simultaneous Machine Selection and Buffer Allocation. IEEE Transactions on Automation Science and Engineering 20:1, pages 675-689.
Crossref
Mehmet Ulaş Koyuncuoğlu & Leyla Demir. (2023) An adaptive hybrid variable-large neighborhood search algorithm for profit maximization problem in designing production lines. Computers & Industrial Engineering 175, pages 108871.
Crossref
Horst Tempelmeier, Stefan Helber & Heinrich Kuhn. 2019. Handbuch Logistik. Handbuch Logistik
1
34
.
Neven Hadžić, Viktor Ložar, Tihomir Opetuk & Zoran Kunkera. (2022) The Bernoulli Assembly Line: The Analytical and Semi-Analytical Evaluation of Steady-State Performance. Applied Sciences 12:23, pages 12447.
Crossref
F.E. Sachs, S. Helber & G.P. Kiesmüller. (2022) Evaluation of Unreliable Flow Lines with Limited Buffer Capacities and Spare Part Provisioning. European Journal of Operational Research 302:2, pages 544-559.
Crossref
Lingchen Liu, Chao-Bo Yan & Jingshan Li. (2022) Modeling, Analysis, and Improvement of Batch-Discrete Manufacturing Systems: A Systems Approach. IEEE Transactions on Automation Science and Engineering 19:3, pages 1567-1585.
Crossref
Heng Dong & Jingshan Li. (2022) Energy and Productivity Analysis in Serial Production Lines With Setups. IEEE Robotics and Automation Letters 7:3, pages 7108-7115.
Crossref
Yasmine Alaouchiche, Yassine Ouazene & Farouk Yalaoui. (2022) A fast and efficient analytical method for throughput evaluation of unreliable series-parallel production lines. Journal of Industrial and Management Optimization 0:0, pages 0-0.
Crossref
Xiaopeng Liu, Huiyu Zhang, Jun Lin, Xuanrui Chen, Qingxin Chen & Ning Mao. (2022) A Queuing Network Model for Solving Facility Layout Problem in Multifloor Flow Shop. IEEE Access 10, pages 61326-61341.
Crossref
Mehmet Ulaş Koyuncuoğlu & Leyla Demir. (2020) A comparison of combat genetic and big bang–big crunch algorithms for solving the buffer allocation problem. Journal of Intelligent Manufacturing 32:6, pages 1529-1546.
Crossref
Viktor Ložar, Neven Hadžić, Tihomir Opetuk & Vedran Slapničar. (2021) Accuracy of Semi-Analytical and Numerical Approaches in the Evaluation of Serial Bernoulli Production Lines. Mathematics 9:13, pages 1461.
Crossref
Ziwei Lin, Nicla Frigerio, Andrea Matta & Shichang Du. (2020) Multi-fidelity surrogate-based optimization for decomposed buffer allocation problems. OR Spectrum 43:1, pages 223-253.
Crossref
Neven Hadžić, Viktor Ložar & Filip Abdulaj. (2020) A Finite State Method in the Performance Evaluation of the Bernoulli Serial Production Lines. Applied Sciences 10:18, pages 6602.
Crossref
Yasmine Alaouchiche, Yassine Ouazene & Farouk Yalaoui. (2020) Economic and Energetic Performance Evaluation of Unreliable Production Lines: An Integrated Analytical Approach. IEEE Access 8, pages 185330-185345.
Crossref
Y. Alaouchiche, Y. Ouazene & F. Yalaoui. (2020) Energetic and Economic Performance Evaluation of Production Systems: Perspective Analysis. IFAC-PapersOnLine 53:2, pages 11150-11155.
Crossref
Chrissoleon T. Papadopoulos, Jingshan Li & Michael E.J. O'Kelly. (2019) A classification and review of timed Markov models of manufacturing systems. Computers & Industrial Engineering 128, pages 219-244.
Crossref
Konstantinos Boulas, Alexandros Tzanetos & Georgios Dounias. (2018) Acquisition of approximate throughput formulas for serial production lines with parallel machines using intelligent techniques. Acquisition of approximate throughput formulas for serial production lines with parallel machines using intelligent techniques.
Jun-Qiang Wang, Fei-Yi Yan, Peng-Hao Cui, Tian Xia, Fu-Dong Cui & Sicco Verwer. (2017) Modeling and analysis of non-homogenous fabrication/assembly systems with multiple failure modes. The International Journal of Advanced Manufacturing Technology 94:9-12, pages 3309-3325.
Crossref
Horst Tempelmeier, Stefan Helber & Heinrich Kuhn. 2018. Planung logistischer Systeme. Planung logistischer Systeme
29
70
.
J. MacGregor SmithJ. MacGregor Smith. 2018. Introduction to Queueing Networks. Introduction to Queueing Networks
133
180
.
Sabry Shaaban, Tom McNamara & Viatcheslav Dmitriev. (2017) Asymmetrical buffer allocation in unpaced merging assembly lines. Computers & Industrial Engineering 109, pages 211-220.
Crossref
Guan Wang, Yang Woo Shin & Dug Hee Moon. (2015) Comparison of three flow line layouts with unreliable machines and profit maximization. Flexible Services and Manufacturing Journal 28:4, pages 669-693.
Crossref
Feng Ju, Jingshan Li, Guoxian Xiao, Ningjian Huang, Jorge Arinez, Stephan Biller & Weiwen Deng. 2016. Advances in Battery Manufacturing, Service, and Management Systems. Advances in Battery Manufacturing, Service, and Management Systems
29
56
.
Wen Su, Xiaolei Xie, Jingshan Li & Li Zheng. (2016) An energy and productivity optimization model in Bernoulli serial lines. An energy and productivity optimization model in Bernoulli serial lines.
Beixin Xia, Binghai Zhou, Ci Chen & Lifeng Xi. (2014) A generalized-exponential decomposition method for the analysis of inhomogeneous assembly/disassembly systems with unreliable machines and finite buffers. Journal of Intelligent Manufacturing 27:4, pages 765-779.
Crossref
Yonlanan Chomnawung, Suksan Prombanpong & Chanakarn Klavohm. (2016) A Buffer Analysis in a Transfer Production Line. MATEC Web of Conferences 68, pages 06005.
Crossref
Ünsal Özdoğru & Tayfur Altiok. (2012) Continuous material flow systems: analysis of marine ports handling bulk materials. Annals of Operations Research 231:1, pages 79-104.
Crossref
Farshad Jarrahi & Walid Abdul-Kader. (2015) Performance evaluation of a multi-product production line: An approximation method. Applied Mathematical Modelling 39:13, pages 3619-3636.
Crossref
Michael Manitz. (2014) Analysis of assembly/disassembly queueing networks with blocking after service and general service times. Annals of Operations Research 226:1, pages 417-441.
Crossref
Ali Mohtashami. (2014) A new hybrid method for buffer sizing and machine allocation in unreliable production and assembly lines with general distribution time-dependent parameters. The International Journal of Advanced Manufacturing Technology 74:9-12, pages 1577-1593.
Crossref
Chuan Shi & Stanley B. Gershwin. (2014) Improvement of the evaluation of closed-loop production systems with unreliable machines and finite buffers. Computers & Industrial Engineering 75, pages 239-256.
Crossref
Yassine Ouazene, Hicham Chehade, Alice Yalaoui & Farouk Yalaoui. (2013) Equivalent machine method for approximate evaluation of buffered unreliable production lines. Equivalent machine method for approximate evaluation of buffered unreliable production lines.
Maria Koteoglou & Alexandros C. Diamantidis. (2013) Analysis of a three machine-one buffer merge system with quality and operational failures. IFAC Proceedings Volumes 46:9, pages 1298-1303.
Crossref
C.D. Senanayake & V. Subramaniam. (2013) Estimating customer service levels in automated multiple part-type production lines: An analytical method. Computers & Industrial Engineering 64:1, pages 109-121.
Crossref
Yassine Ouazene, Alice Yalaoui, Hicham Chehade & Farouk Yalaoui. 2013. Computational Logistics. Computational Logistics
229
241
.
Barış Tan. 2013. Handbook of Stochastic Models and Analysis of Manufacturing System Operations. Handbook of Stochastic Models and Analysis of Manufacturing System Operations
287
311
.
J. MacGregor Smith. 2013. Handbook of Stochastic Models and Analysis of Manufacturing System Operations. Handbook of Stochastic Models and Analysis of Manufacturing System Operations
249
285
.
Jingshan Li, Semyon M. Meerkov & Liang Zhang. 2013. Handbook of Stochastic Models and Analysis of Manufacturing System Operations. Handbook of Stochastic Models and Analysis of Manufacturing System Operations
167
210
.
Maghsoud Amiri & Ali Mohtashami. (2011) Buffer allocation in unreliable production lines based on design of experiments, simulation, and genetic algorithm. The International Journal of Advanced Manufacturing Technology 62:1-4, pages 371-383.
Crossref
Leyla Demir, Semra Tunalı & Deniz Türsel Eliiyi. (2012) An adaptive tabu search approach for buffer allocation problem in unreliable non-homogenous production lines. Computers & Operations Research 39:7, pages 1477-1486.
Crossref
Marcello Colledani & Tullio Tolio. (2009) Performance evaluation of transfer lines with general repair times and multiple failure modes. Annals of Operations Research 182:1, pages 31-65.
Crossref
Jun Liu, Dun Yan, Ruicheng Feng & Shengqiang Wang. (2010) Performance evaluation of production lines with unreliable buffer. Performance evaluation of production lines with unreliable buffer.
Y. Massim, F. Yalaoui, L. Amodeo, E. Chatelet & A. Zeblah. (2010) Efficient combined immune-decomposition algorithm for optimal buffer allocation in production lines for throughput and profit maximization. Computers & Operations Research 37:4, pages 611-620.
Crossref
Chuan Shi & Stanley B. Gershwin. (2009) An efficient buffer design algorithm for production line profit maximization. International Journal of Production Economics 122:2, pages 725-740.
Crossref
Diamantidis C. Alexandros & Papadopoulos T. Chrissoleon. (2009) Exact analysis of a two-workstation one-buffer flow line with parallel unreliable machines. European Journal of Operational Research 197:2, pages 572-580.
Crossref
Marcello Colledani & Tullio Tolio. (2009) Performance evaluation of production systems monitored by statistical process control and off-line inspections. International Journal of Production Economics 120:2, pages 348-367.
Crossref
Cao Yongxin & Velusamy Subramaniam. (2009) Modeling of a two-machine line with assignable cause quality failures. Modeling of a two-machine line with assignable cause quality failures.
Dennis E. Blumenfeld & Robert R. Inman. (2009) Impact of Absenteeism on Assembly Line Quality and Throughput. Production and Operations Management 18:3, pages 333-343.
Crossref
Diomidis Spinellis, Michael J. Vidalis, Michael E. J. O'Kelly & Chrissoleon T. PapadopoulosChrissoleon T. Papadopoulos, Michael J. Vidalis, Michael E. J. O’Kelly & Diomidis Spinellis. 2009. Analysis and Design of Discrete Part Production Lines. Analysis and Design of Discrete Part Production Lines
25
99
.
Jung-Tai Chen. (2008) Queueing models of certain manufacturing cells under product-mix sequencing rules. European Journal of Operational Research 188:3, pages 826-837.
Crossref
Michael Manitz. (2008) Queueing-model based analysis of assembly lines with finite buffers and general service times. Computers & Operations Research 35:8, pages 2520-2536.
Crossref
Elisa Gebennini, Andrea Grassi, Cristian Secchi & Cesare Fantuzzi. (2008) An analytical model for automated packaging lines design. An analytical model for automated packaging lines design.
Nabil Nahas, Mustapha Nourelfath & Daoud Ait‐Kadi. (2008) Ant colonies for structure optimisation in a failure prone series‐parallel production system. Journal of Quality in Maintenance Engineering 14:1, pages 7-33.
Crossref
. 2008. Handbuch Logistik. Handbuch Logistik
95
180
.
Mahyar Mahinzaeim. (2007) Stochastic modelling and simulation of production lines: a computer-based approach towards model validationStochastische Modellierung und Simulation von Produktionslinien: Ein computerbasiertes Verfahren zur Modellvalidierung. Forschung im Ingenieurwesen 71:3-4, pages 205-213.
Crossref
Davide Ferrari & Andrea Matta. (2007) ANALYTICAL PERFORMANCE EVALUATION OF SMALL FLOW LINES WITH SHARED BUFFER. IFAC Proceedings Volumes 40:6, pages 7-12.
Crossref
Nabil Nahas, Daoud Ait-Kadi & Mustapha Nourelfath. (2006) A new approach for buffer allocation in unreliable production lines. International Journal of Production Economics 103:2, pages 873-881.
Crossref
A.C. Diamantidis & C.T. Papadopoulos. (2006) Markovian analysis of a discrete material manufacturing system with merge operations, operation-dependent and idleness failures. Computers & Industrial Engineering 50:4, pages 466-487.
Crossref
L. Cauffriez & D. Willaeys. (2005) A predictive model for improving production line performance. The International Journal of Advanced Manufacturing Technology 29:9-10, pages 969-979.
Crossref
Walid Abdul-Kader. (2006) Capacity improvement of an unreliable production line—an analytical approach. Computers & Operations Research 33:6, pages 1695-1712.
Crossref
Young-Doo Lee & Tae-Eog Lee. 2006. Stochastic Modeling of Manufacturing Systems. Stochastic Modeling of Manufacturing Systems
149
166
.
Stefan Helber. 2006. Stochastic Modeling of Manufacturing Systems. Stochastic Modeling of Manufacturing Systems
55
76
.
Mustapha Nourelfath, Nabil Nahas & Daoud Ait‐Kadi. (2005) Optimal design of series production lines with unreliable machines and finite buffers. Journal of Quality in Maintenance Engineering 11:2, pages 121-138.
Crossref
J. Li. (2005) Overlapping Decomposition: A System-Theoretic Method for Modeling and Analysis of Complex Manufacturing Systems. IEEE Transactions on Automation Science and Engineering 2:1, pages 40-53.
Crossref
Jingshan Li, D.E. Blumenfeld & S.P. Marin. (2005) Manufacturing system design to improve quality buy rate. Manufacturing system design to improve quality buy rate.
Michael Manitz. 2005. Operations Research Proceedings 2004. Operations Research Proceedings 2004
110
117
.
A. Matta, Q. Semeraro & T. Tolio. 2005. Design of Advanced Manufacturing Systems. Design of Advanced Manufacturing Systems
125
189
.
Jingshan Li & Semyon M. Meerkov. 2005. Analysis, Control and Optimization of Complex Dynamic Systems. Analysis, Control and Optimization of Complex Dynamic Systems
61
90
.
Chin-Tai Chen & John Yuan. (2004) Transient throughput analysis for a series type system of machines in terms of alternating renewal processes. European Journal of Operational Research 155:1, pages 178-197.
Crossref
J. Sadr & R.P. Malhame. (2004) Decomposition/Aggregation-Based Dynamic Programming Optimization of PartiallyHomogeneous UnreliableTransfer Lines. IEEE Transactions on Automatic Control 49:1, pages 68-81.
Crossref
J. Sadr & R.P. Malhame. (2004) A characterization of the maximum throughput of unreliable transfer lines. A characterization of the maximum throughput of unreliable transfer lines.
R. Levantesi, A. Matta & T. Tolio. (2003) Performance evaluation of continuous production lines with machines having different processing times and multiple failure modes. Performance Evaluation 51:2-4, pages 247-268.
Crossref
R. Levantesi, A. Matta & T. Tolio. 2003. Analysis and Modeling of Manufacturing Systems. Analysis and Modeling of Manufacturing Systems
201
219
.
R. Levantesi, A. Matta & T. Tolio. 2003. Analysis and Modeling of Manufacturing Systems. Analysis and Modeling of Manufacturing Systems
181
200
.
Heinrich Kuhn. 2003. Analysis and Modeling of Manufacturing Systems. Analysis and Modeling of Manufacturing Systems
155
179
.
Jingshan Li & Semyon M. Meerkov. 2003. Analysis and Modeling of Manufacturing Systems. Analysis and Modeling of Manufacturing Systems
221
253
.
Frank Schultmann, Hans Sebastian Heese & Otto Rentz. (2002) Leistungsanalyse elastisch gekoppelter Fließfertigungssysteme. Zeitschrift für wirtschaftlichen Fabrikbetrieb 97:4, pages 195-204.
Crossref
Man-Soo Han & Dong-Jo Park. (2002) Optimal buffer allocation of serial production lines with quality inspection machines. Computers & Industrial Engineering 42:1, pages 75-89.
Crossref
J. Sadr & R.P. Malhame. (2002) Unreliable transfer lines throughput maximization. Unreliable transfer lines throughput maximization.
R. Lipset, R.P. Van Til & S. Sengupta. (1999) Steady-state performance analysis of serial transfer lines subject to machine and buffer failure. IEEE Transactions on Automatic Control 44:2, pages 319-325.
Crossref
Manish K. Govil & Michael C. Fu. (1999) Queueing theory in manufacturing: A survey. Journal of Manufacturing Systems 18:3, pages 214-240.
Crossref
Stefan Helber. (1998) Decomposition of unreliable assembly/disassembly networks with limited buffer capacity and random processing times. European Journal of Operational Research 109:1, pages 24-42.
Crossref
M. Chan & B. Szabados. (1998) A novel representation of tandem systems with inter-stage storage applied to on-line system monitoring. The International Journal of Advanced Manufacturing Technology 14:3, pages 220-227.
Crossref
Mitchell Burman, Stanley B. Gershwin & Curtis Suyematsu. (1998) Hewlett-Packard Uses Operations Research to Improve the Design of a Printer Production Line. Interfaces 28:1, pages 24-36.
Crossref
T. Tolio, A. Matta & F. Jovane. (1998) A Method for Performance Evaluation of Automated Flow Lines. CIRP Annals 47:1, pages 373-376.
Crossref
S. Yeralan & B. Tan. (1997) Analysis of multistation production systems with limited buffer capacity part 1: The subsystem model. Mathematical and Computer Modelling 25:7, pages 109-122.
Crossref
S.B. Gershwin. (1997) Design and operation of manufacturing systems-control- and system-theoretical models and issues. Design and operation of manufacturing systems-control- and system-theoretical models and issues.
Y. Dallery & H. Le Bihan. (1997) Homogenisation Techniques for the Analysis of Production Lines with Unreliable Machines Having Different Speeds. European Journal of Control 3:3, pages 200-215.
Crossref
Shimon Y. Nof, Wilbert E. Wilhelm & Hans-Jürgen WarneckeShimon Y. Nof, Wilbert E. Wilhelm & Hans-Jürgen Warnecke. 1997. Industrial Assembly. Industrial Assembly
259
311
.
Bariş Tan & Sencer Yeralan. (1996) A fuzzy decomposition method for multistation production systems subject to blocking. International Journal of Production Economics 42:3, pages 245-262.
Crossref
F.Frank Chen & Satanapa Thinphangnga. (1996) Analytical modeling and analysis of flexible manufacturing systems considering system component failure/repair rates. Journal of Manufacturing Systems 15:3, pages 143-154.
Crossref
Y. Dallery & H. Le Bihan. (1995) An improved decomposition method for the analysis of production lines with unreliable machines and finite buffers. An improved decomposition method for the analysis of production lines with unreliable machines and finite buffers.
Thomas F. Hassett & Duane L. Dietrich. (1995) Availability/reliability engineering analysis of three, four, and five-stage unreliable series transfer lines. Journal of Manufacturing Systems 14:6, pages 427-438.
Crossref
M. Baykal-Gürsoy, T. Altiok & H. Danhong. (1994) Look-back policies for two-stage, pull-type production/inventory systems. Annals of Operations Research 48:4, pages 381-400.
Crossref
Elias Yannopoulos & Attahiru Sule Alfa. (1994) An approximation method for queues in series with blocking. Performance Evaluation 20:4, pages 373-390.
Crossref
Petro Yuanidis, Maciej A. Styblinski, Donald R. Smith & Chanan Singh. (1994) Reliability modeling of flexible manufacturing systems. Microelectronics Reliability 34:7, pages 1203-1220.
Crossref
Harald Schmidbauer & Angi Rösch. (1994) A stochastic model of an unreliable kanban production system. OR Spektrum 16:2, pages 155-160.
Crossref
Chinho Lin, Christian N. Madu & Chu-Hua Kuei. (1994) Experimental design and regression analysis in simulation: An automated flowline case study. Microelectronics Reliability 34:5, pages 845-861.
Crossref
Rajan Suri & Bor-Ruey Fu. (1994) On using continuous flow lines to model discrete production lines. Discrete Event Dynamic Systems: Theory and Applications 4:2, pages 129-169.
Crossref
N. Viswanadham & R. Ram. (1994) Composite performance-dependability analysis of cellular manufacturing systems. IEEE Transactions on Robotics and Automation 10:2, pages 245-258.
Crossref
Yves Dallery. (1994) On modeling failure and repair times in stochastic models of manufacturing systems using generalized exponential distributions. Queueing Systems 15:1-4, pages 199-209.
Crossref
R. Alvarez-Vargas, Y. Dallery & R. David. (1994) A study of the continuous flow model of production lines with unreliable machines and finite buffers. Journal of Manufacturing Systems 13:3, pages 221-234.
Crossref
Tan Min. (1993) The reliability model on a two stage CIMS production line. Microelectronics Reliability 33:9, pages 1275-1280.
Crossref
Rajan Suri, Jerry L. Sanders & Manjunath Kamath. 1993. Logistics of Production and Inventory. Logistics of Production and Inventory
199
286
.
Yves Dallery & Stanley B. Gershwin. (1992) Manufacturing flow line systems: a review of models and analytical results. Queueing Systems 12:1-2, pages 3-94.
Crossref
R. Suri & B.-R. Fu. (1991) On using continuous flow lines for performance estimation of discrete production lines. On using continuous flow lines for performance estimation of discrete production lines.
Y.-T. Leung & R. Suri. (1990) Performance evaluation of discrete manufacturing systems. IEEE Control Systems Magazine 10:4, pages 77-86.
Crossref
Xiao-Gao Liu & John A. Buzacott. (1990) Approximate models of assembly systems with finite inventory banks. European Journal of Operational Research 45:2-3, pages 143-154.
Crossref
X. Xie. (1990) An efficient algorithm for performance analysis of transfer lines and its convergence. An efficient algorithm for performance analysis of transfer lines and its convergence.
Y. Dallery, R. David & X.-L. Xie. (1989) Approximate analysis of transfer lines with unreliable machines and finite buffers. IEEE Transactions on Automatic Control 34:9, pages 943-953.
Crossref