Citations (24)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (7)
Eric B. Weston, Alexander Aurand, Jonathan S. Dufour, Gregory G. Knapik & William S. Marras. (2018) Biomechanically determined hand force limits protecting the low back during occupational pushing and pulling tasks. Ergonomics 61:6, pages 853-865.
Read now
Read now
Amy Y. Chow, Nicholas J. La Delfa & Clark R. Dickerson. (2017) Muscular Exposures During Standardized Two-Handed Maximal Pushing and Pulling Tasks. IISE Transactions on Occupational Ergonomics and Human Factors 5:3-4, pages 136-147.
Read now
Read now
Amy Y. Chow & Clark R. Dickerson. (2016) Determinants and magnitudes of manual force strengths and joint moments during two-handed standing maximal horizontal pushing and pulling. Ergonomics 59:4, pages 534-544.
Read now
Read now
M.G. Boocock, R.A. Haslam, P. Lemon & S. Thorpe. (2006) Initial force and postural adaptations when pushing and pulling on floor surfaces with good and reduced resistance to slipping. Ergonomics 49:9, pages 801-821.
Read now
Read now
A. J. Van Der Beek, B. D. R. Kluver, M. H. W. Frings-Dresen & M. J. M. Hoozemans. (2000) Gender differences in exerted forces and physiological load during pushing and pulling of wheeled cages by postal workers. Ergonomics 43:2, pages 269-281.
Read now
Read now
MARCO J. M. HOOZEMANS, ALLARD J. VAN DER BEEK, MONIQUE H. W. FRINGSDRESEN, FRANK J. H. VAN DIJK & LUC H. V. VAN DER WOUDE. (1998) Pushing and pulling in relation to musculoskeletal disorders: a review of risk factors. Ergonomics 41:6, pages 757-781.
Read now
Read now
L. H.V. van der Woude, C. M. Van Konlngsbruggen, A. L. Kroes & I. Kingma. (1995) Effect of push handle height on net moments and forces on the musculoskeletal system during standardized wheelchair pushing tasks. Prosthetics and Orthotics International 19:3, pages 188-201.
Read now
Read now
Articles from other publishers (17)
Jacqueline Toner, Jeremy Rickards, Kenneth Seaman & Usha Kuruganti. (2021) Alteration in HDEMG Spatial Parameters of Trunk Muscle Due to Handle Design during Pushing. Sensors 21:19, pages 6646.
Crossref
Crossref
Lucia Botti, Francesco Gabriele Galizia, Cristina Mora & Giorgio Zecchi. (2020) A thorough investigation on pushing activities in industry: The impact of the variation in the speed of motion and load conditions on initial and sustained forces. Applied Ergonomics 85, pages 103080.
Crossref
Crossref
Lucia Botti, Cristina Mora, Giorgio Zecchi & Giulia Baruffaldi. 2019. Advances in Manufacturing, Production Management and Process Control. Advances in Manufacturing, Production Management and Process Control
169
178
.
Cannan Yi, Fan Tang, Lu Peng, Kai Way Li, Liang Ma & Hong Hu. (2018) Modeling of maximum endurance time for static pulling tasks. Work 60:3, pages 455-463.
Crossref
Crossref
M. Brütting, I. Hermanns, A. Nienhaus & R. Ellegast. (2016) Muskel-Skelett-Belastungen beim Schieben und Ziehen von Krankenbetten und RollstühlenMusculoskeletal stress during pushing and pulling hospital beds and wheelchairs. Zentralblatt für Arbeitsmedizin, Arbeitsschutz und Ergonomie 67:2, pages 64-77.
Crossref
Crossref
Aimee Cloutier, James Yang, Debajyoti Pati & Shabboo Valipoor. (2016) Experimental identification of potential falls in older adult hospital patients. Journal of Biomechanics 49:7, pages 1016-1020.
Crossref
Crossref
Huei Chu Kao, Chiuhsiang Joe Lin, Yung Hui Lee & Su Huang Chen. (2015) The Effects of Direction of Exertion, Path, and Load Placement in Nursing Cart Pushing and Pulling Tasks: An Electromyographical Study. PLOS ONE 10:10, pages e0140792.
Crossref
Crossref
Arun Garg, Thomas Waters, Jay Kapellusch & Waldemar Karwowski. (2014) Psychophysical basis for maximum pushing and pulling forces: A review and recommendations. International Journal of Industrial Ergonomics 44:2, pages 281-291.
Crossref
Crossref
Yi-Lang CHEN, Yu-Chi LEE & Tin-Chi HSU. (2011) Isometric Push and Pull Strengths of Young Taiwanese Males. Industrial Health 49:6, pages 696-702.
Crossref
Crossref
Kai Way Li, Chien-Chi Chang & Wen-Ruey Chang. (2008) Slipping of the foot on the floor when pulling a pallet truck. Applied Ergonomics 39:6, pages 812-819.
Crossref
Crossref
Myung-Chul JUNG, Joel M. HAIGHT & M. Susan HALLBECK. (2007) Biomechanical and Physiological Analyses of a Luggage-Pulling Task. Industrial Health 45:6, pages 756-765.
Crossref
Crossref
Ruey-Maw Chen, Shih-Tang Lo & Yueh-Min Huang. 2007. New Trends in Applied Artificial Intelligence. New Trends in Applied Artificial Intelligence
715
724
.
Myung-Chul Jung, Joel M. Haight & Andris Freivalds. (2005) Pushing and pulling carts and two-wheeled hand trucks. International Journal of Industrial Ergonomics 35:1, pages 79-89.
Crossref
Crossref
J.T Harvey, J Culvenor, W Payne, S Cowley, M Lawrance, D Stuart & R Williams. (2002) An analysis of the forces required to drag sheep over various surfaces. Applied Ergonomics 33:6, pages 523-531.
Crossref
Crossref
R.A Haslam, M Boocock, P Lemon & S Thorpe. (2002) Maximum acceptable loads for pushing and pulling on floor surfaces with good and reduced resistance to slipping. Safety Science 40:7-8, pages 625-637.
Crossref
Crossref
R A Haslam, M Boocock, P Lemon & S Thorpe. (2016) Dynamic Pushing and Pulling and Implications for Slipping. Proceedings of the Human Factors and Ergonomics Society Annual Meeting 44:28, pages 479-481.
Crossref
Crossref
Marc L. Resnick & Don B. Chaffin. (1995) An ergonomic evaluation of handle height and load in maximal and submaximal cart pushing. Applied Ergonomics 26:3, pages 173-178.
Crossref
Crossref