Advanced search
Publication Cover
Experimental Heat Transfer
A Journal of Thermal Energy Generation, Transport, Storage, and Conversion
Volume 21, 2008 - Issue 1
Submit an article Journal homepage
590
Views
67
CrossRef citations to date
0
Altmetric
Original Articles

SPRAY COOLING OF HIGH TEMPERATURE METALS USING HIGH MASS FLUX INDUSTRIAL NOZZLES

H. M. Al-Ahmadi Damman College of Technology, Dammam, Saudi Arabia
&
S. C. Yao Department of Mechanical Engineering, Carnegie Mellon University, Pittsburgh, Pennsylvania, USA
Pages 38-54 | Accepted 05 Feb 2007, Published online: 17 Jan 2008

Citations (67)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (6)

Taqia Rahman, Andrew Dawson, Nick Thom, Tri Sudibyo, Juan S. Carvajal-Munoz, Fardzanela Suwarto & Imtiaz Ahmed. (2023) Spray water cooling of newly laid asphalt pavement for rapid opening to traffic. Road Materials and Pavement Design 24:4, pages 1103-1129.
Read now
Sabariman & Eckehard Specht. (2018) Characterization of the boiling width on metal quenching with spray cooling. Experimental Heat Transfer 31:5, pages 391-404.
Read now
Muhammad Aamir, Liao Qiang, Zhu Xun, Hong Wang & Ramzan Ullah. (2016) Study on Ultra-fast Cooling Behaviors of Water Spray Cooled Stainless Steel Plates. Experimental Heat Transfer 29:3, pages 299-321.
Read now
S. S. Mohapatra, J. M. Jha, S. V. Ravikumar, A. Singh, C. Bhatacharya, S. K. Pal & S. Chakraborty. (2015) Effect of Oxide Layer in the Ultra Fast Cooling of a Steel Plate. Experimental Heat Transfer 28:2, pages 156-173.
Read now
S. S. Mohapatra, J. M. Jha, K. Srinath, S. K. Pal & S. Chakraborty. (2014) Enhancement of Cooling Rate for a Hot Steel Plate using Air-Atomized Spray with Surfactant-Added Water. Experimental Heat Transfer 27:1, pages 72-90.
Read now
S.S. Mohapatra, S. Chakraborty & S.K. Pal. (2012) Experimental Studies on Different Cooling Processes to Achieve Ultra-Fast Cooling Rate for Hot Steel Plate. Experimental Heat Transfer 25:2, pages 111-126.
Read now

Articles from other publishers (61)

Yuhang Guo, Xiaojun Liu, Jiawei Ji, Zhaochang Wang, Xidong Hu, Yongqing Zhu, Tao Zhang, Tongtong Tao, Kun Liu & Yunlong Jiao. (2023) Delayed Leidenfrost Effect of a Cutting Droplet on a Microgrooved Tool Surface. Langmuir 39:28, pages 9648-9659.
Crossref
Saeed Jowkar, Xing Shen, Mohammad Reza Morad & Ghader Olyaei. (2023) A numerical modeling of thermal management of high CPV arrays using spray cooling. Applied Thermal Engineering 230, pages 120823.
Crossref
Muhammad Jamil, Ning He, Wei Zhao, Munish Kumar Gupta & Aqib Mashood Khan. (2023) Novel approach of cutting temperature measurement in sustainable milling of Ti-6Al-4V alloy. Measurement 214, pages 112837.
Crossref
Bhuwanesh Kumar, Ravi Kumar & Akhilesh Gupta. 2023. Emerging Trends in Energy Conversion and Thermo-Fluid Systems. Emerging Trends in Energy Conversion and Thermo-Fluid Systems 125 137 .
Matthias Koegl, Moritz Delwig & Lars Zigan. (2022) Characterization of Fluorescence Tracers for Thermometry and Film Thickness Measurements in Liquid Coolants Relevant for Thermal Management of Electric and Electronic Components. Sensors 22:22, pages 8892.
Crossref
Yutaku Kita, Mikiya Nakamatsu, Sumitomo Hidaka, Masamichi Kohno & Yasuyuki Takata. (2022) Quenching mechanism of spray cooling and the effect of system pressure. International Journal of Heat and Mass Transfer 190, pages 122795.
Crossref
Sabariman & Eckehard Specht. (2022) Investigation on salts mixture effect to the Leidenfrost temperature during spray quenching with use of actual cooling water from metal industries. Thermal Science and Engineering Progress 28, pages 101171.
Crossref
Alfonso Ruiz-Pineda, Alicia Aguilar-Corona, Constantin Alberto Hernández-Bocanegra, José Ángel Ramos-Banderas, Gildardo Solorio-Díaz & Romeo Omar Preciado-Martínez. (2022) Impingement Density Analysis on Heat Transfer and the Appearance of Edge Cracks in Conventional Slab Using Hydraulic Nozzles. Metals 12:1, pages 108.
Crossref
Prashant Kumar & Sudipto Chakraborty. (2021) Experimental investigation of hot AISI 304 steel plate with very‐high mass‐flux varying water temperature spray. Heat Transfer 51:1, pages 1110-1137.
Crossref
M. Börnhorst & O. Deutschmann. (2021) Advances and challenges of ammonia delivery by urea-water sprays in SCR systems. Progress in Energy and Combustion Science 87, pages 100949.
Crossref
Xiuhua Tian, Tianliang Fu, Zhaodong Wang & Guodong Wang. (2020) Effect of Surfactants on Liquid–Solid Heat Transfer on High‐Temperature Wall. steel research international 92:2, pages 2000321.
Crossref
Sagar Dave, Sirshendu Chattopadhyay & Deepak Gupta. 2021. Advances in Mechanical Engineering. Advances in Mechanical Engineering 487 493 .
Milan Hnizdil, Jan Kominek, Tae-Woo Lee, Miroslav Raudensky, Maria Carnogurska & Martin Chabicovsky. (2020) Prediction of Leidenfrost Temperature in Spray Cooling for Continuous Casting and Heat Treatment Processes. Metals 10:11, pages 1551.
Crossref
Kyung-Hwan Lim, Jungshin Kang & Kyung-Woo Yi. (2020) Study on the effects of electrostatic force and spray characteristics in spray cooling of vertical hot strip. Journal of Electrostatics 108, pages 103517.
Crossref
Kengo Tsukamoto, Yutaku Kita, Shinya Inoue, Takafumi Hamanosono, Sumitomo Hidaka, Satoshi Ueoka, Hiroyuki Fukuda, Masamichi Kohno & Yasuyuki Takata. (2020) On the onset of quench during spray cooling: The significance of oxide layers. Applied Thermal Engineering 179, pages 115682.
Crossref
L. Das, A.R. Pati, Anita Panda, B. Munshi, D.K. Sahoo, K. Barik, S.S. Mohapatra & A. Sahoo. (2020) The enhancement of spray cooling at very high initial temperature by using dextrose added water. International Journal of Heat and Mass Transfer 150, pages 119311.
Crossref
Ishita Sarkar, Jay M. Jha, V. Priyanka, Surjya K. Pal & Sudipto Chakraborty. (2019) Application of binary mixed surfactant additives in jet impingement cooling of a hot steel plate. Heat and Mass Transfer 55:12, pages 3413-3425.
Crossref
Hong Liu, Han Chen, Chang Cai, Ming Jia & Hongchao Yin. (2019) Numerical investigation on the unsteady spray cooling of high temperature steel plate. International Journal of Heat and Mass Transfer 143, pages 118342.
Crossref
Avadhesh Kumar Sharma & Santosh Kumar Sahu. (2019) An experimental study on heat transfer and rewetting behavior of hot horizontal downward facing hot surface by mist jet impingement. Applied Thermal Engineering 151, pages 459-474.
Crossref
Hong Liu, Chang Cai, Yan’an Yan, Ming Jia & Baozhen Yin. (2018) Numerical simulation and experimental investigation on spray cooling in the non-boiling region. Heat and Mass Transfer 54:12, pages 3747-3760.
Crossref
O. Lamini, R. Wu, C.Y. Zhao & Z.G. Xu. (2018) Enhanced heat spray cooling with a moving nozzle. Applied Thermal Engineering 141, pages 921-927.
Crossref
M. Enrique Huerta L, Tania M. Flores F, Claudia Barraza de la P & A. Humberto Castillejos E. (2018) Air-Mist Heat Extraction and Visualization of Droplets–Surface Interactions From 60 to 1200 °C Under Steady-State Conditions. Journal of Heat Transfer 140:6.
Crossref
Ishita Sarkar, Samarshi Chakraborty, Avinash Ashok, Iman Sengupta, Surjya K. Pal & Sudipto Chakraborty. (2018) Comparative study on different additives with a jet array on cooling of a hot steel surface. Applied Thermal Engineering 137, pages 154-163.
Crossref
A. R. Pati, A. Kumar & S. S. Mohapatra. (2017) Upward and downward facing high mass flux spray cooling with additives: A novel technique to enhance the heat removal rate at high initial surface temperature. Heat and Mass Transfer 54:6, pages 1669-1680.
Crossref
A. Panda, A.R. Pati, S. Pradhan, B. Saha, A. Kumar & S.S. Mohapatra. (2018) High mass flux air atomized spray with subcooled water: A novel methodology to enhance the heat transfer rate in film boiling regime. International Journal of Heat and Mass Transfer 120, pages 1287-1304.
Crossref
Yujun Liao, Panayotis Dimopoulos Eggenschwiler, Roman Furrer, Moyu Wang & Konstantinos Boulouchos. (2018) Heat transfer characteristics of urea-water spray impingement on hot surfaces. International Journal of Heat and Mass Transfer 117, pages 447-457.
Crossref
Gangtao Liang & Issam Mudawar. (2017) Review of spray cooling – Part 2: High temperature boiling regimes and quenching applications. International Journal of Heat and Mass Transfer 115, pages 1206-1222.
Crossref
A.R. Pati, Lily, A.P. Behera, B. Munshi & S.S. Mohapatra. (2017) Enhancement of heat removal rate of high mass flux spray cooling by sea water. Experimental Thermal and Fluid Science 89, pages 19-40.
Crossref
Yujun Liao, Panayotis Dimopoulos Eggenschwiler, Daniel Rentsch, Francesco Curto & Konstantinos Boulouchos. (2017) Characterization of the urea-water spray impingement in diesel selective catalytic reduction systems. Applied Energy 205, pages 964-975.
Crossref
N.H. Bhatt, Lily, R. Raj, P. Varshney, A.R. Pati, D. Chouhan, A. Kumar, B. Munshi & S.S. Mohapatra. (2017) Enhancement of heat transfer rate of high mass flux spray cooling by ethanol-water and ethanol-tween20-water solution at very high initial surface temperature. International Journal of Heat and Mass Transfer 110, pages 330-347.
Crossref
N.H. Bhatt, A.R. Pati, A. Kumar, A. Behera, B. Munshi & S.S. Mohapatra. (2017) High mass flux spray cooling with additives of low specific heat and surface tension: A novel process to enhance the heat removal rate. Applied Thermal Engineering 120, pages 537-548.
Crossref
Nedim Sozbir & S. C. Yao. (2016) Spray mist cooling heat transfer in glass tempering process. Heat and Mass Transfer 53:5, pages 1699-1711.
Crossref
Yujun Liao, Roman Furrer, Panayotis Dimopoulos Eggenschwiler & Konstantinos Boulouchos. (2017) Experimental investigation of the heat transfer characteristics of spray/wall interaction in diesel selective catalytic reduction systems. Fuel 190, pages 163-173.
Crossref
A. Labergue, J.-D. Pena-Carillo, M. Gradeck & F. Lemoine. (2017) Combined three-color LIF-PDA measurements and infrared thermography applied to the study of the spray impingement on a heated surface above the Leidenfrost regime. International Journal of Heat and Mass Transfer 104, pages 1008-1021.
Crossref
A. Labergue, M. Gradeck & F. Lemoine. (2016) Experimental investigation of spray impingement hydrodynamic on a hot surface at high flow rates using phase Doppler analysis and infrared thermography. International Journal of Heat and Mass Transfer 100, pages 65-78.
Crossref
Ruichao Guo, Jianjun Wu, He Fan & Xuepeng Zhan. (2016) The effects of spray characteristic on heat transfer during spray quenching of aluminum alloy 2024. Experimental Thermal and Fluid Science 76, pages 211-220.
Crossref
Ruichao Guo, Jianjun Wu, He Fan, Xuepeng Zhan & Yu Hui. (2016) Investigation of dissolved salts on heat transfer for aluminum alloy 2024 during spray quenching. Applied Thermal Engineering 107, pages 1065-1076.
Crossref
Przemysław Smakulski & Sławomir Pietrowicz. (2016) A review of the capabilities of high heat flux removal by porous materials, microchannels and spray cooling techniques. Applied Thermal Engineering 104, pages 636-646.
Crossref
W. Edelbauer, D. Zhang, R. Kopun & B. Stauder. (2016) Numerical and experimental investigation of the spray quenching process with an Euler-Eulerian multi-fluid model. Applied Thermal Engineering 100, pages 1259-1273.
Crossref
Mario E. Huerta L.M. Esther Mejía G.A. Humberto Castillejos E.. (2015) Heat Transfer and Observation of Droplet-Surface Interactions During Air-Mist Cooling at CSP Secondary System Temperatures. Metallurgical and Materials Transactions B 47:2, pages 1409-1426.
Crossref
Arjang Shahriari, Mark Hermes & Vaibhav Bahadur. (2016) Electrical control and enhancement of boiling heat transfer during quenching. Applied Physics Letters 108:9.
Crossref
Shou-Shing Hsieh & Sueng-Yang Luo. (2016) Droplet impact dynamics and transient heat transfer of a micro spray system for power electronics devices. International Journal of Heat and Mass Transfer 92, pages 190-205.
Crossref
Ishita Sarkar, Dinesh Kumar Behera, Jay M. Jha, Surjya K. Pal & Sudipto Chakraborty. (2016) Effect of polymer additive on the cooling rate of a hot steel plate by using water jet. Experimental Thermal and Fluid Science 70, pages 105-114.
Crossref
Jay M. Jha, Satya V. Ravikumar, Ishita Sarkar, Surjya K. Pal & Sudipto Chakraborty. (2015) Ultrafast cooling processes with surfactant additive for hot moving steel plate. Experimental Thermal and Fluid Science 68, pages 135-144.
Crossref
Satya V. Ravikumar, Krishnayan Haldar, Jay M. Jha, Samarshi Chakraborty, Ishita Sarkar, Surjya K. Pal & Sudipto Chakraborty. (2015) Heat transfer enhancement using air-atomized spray cooling with water–Al2O3 nanofluid. International Journal of Thermal Sciences 96, pages 85-93.
Crossref
Zejun Chen, Huiquan Han, Wei Ren & Guangjie Huang. (2015) Heat Transfer Modeling of an Annular On-Line Spray Water Cooling Process for Electric-Resistance-Welded Steel Pipe. PLOS ONE 10:7, pages e0131574.
Crossref
T.L. Fu, Z.D. Wang, X.T. Deng, G.H. Liu & G.D. Wang. (2015) The influence of spray inclination angle on the ultra fast cooling of steel plate in spray cooling condition. Applied Thermal Engineering 78, pages 500-506.
Crossref
A. Labergue, M. Gradeck & F. Lemoine. (2015) Comparative study of the cooling of a hot temperature surface using sprays and liquid jets. International Journal of Heat and Mass Transfer 81, pages 889-900.
Crossref
Khalid H.M. Abdalrahman, Sabariman & Eckehard Specht. (2014) Influence of salt mixture on the heat transfer during spray cooling of hot metals. International Journal of Heat and Mass Transfer 78, pages 76-83.
Crossref
Xiong Zhang, Zhi Wen, Ruifeng Dou, Gang Zhou & Fan Zhang. (2014) Experimental study of the air-atomized spray cooling of high-temperature metal. Applied Thermal Engineering 71:1, pages 43-55.
Crossref
T.L. Fu, Z.D. Wang, Y. Li, J.D. Li & G.D. Wang. (2014) The influential factor studies on the cooling rate of roller quenching for ultra heavy plate. Applied Thermal Engineering 70:1, pages 800-807.
Crossref
Satya V. Ravikumar, Jay M. Jha, A.M. Tiara, Surjya K. Pal & Sudipto Chakraborty. (2014) Experimental investigation of air-atomized spray with aqueous polymer additive for high heat flux applications. International Journal of Heat and Mass Transfer 72, pages 362-377.
Crossref
Soumya S. Mohapatra, Satya V. Ravikumar, Jay M. Jha, Akhilendra K. Singh, Chandrima Bhattacharya, Surjya K. Pal & Sudipto Chakraborty. (2013) Ultra fast cooling of hot steel plate by air atomized spray with salt solution. Heat and Mass Transfer 50:5, pages 587-601.
Crossref
Soumya S. Mohapatra, Satya V. Ravikumar, Ravi Ranjan, Surjya K. Pal, Shiv Brat Singh & Sudipto Chakraborty. (2014) Ultra Fast Cooling and Its Effect on the Mechanical Properties of Steel. Journal of Heat Transfer 136:3.
Crossref
Satya V. Ravikumar, Jay M. Jha, Ishita Sarkar, Surjya K. Pal & Sudipto Chakraborty. (2014) Enhancement of heat transfer rate in air-atomized spray cooling of a hot steel plate by using an aqueous solution of non-ionic surfactant and ethanol. Applied Thermal Engineering 64:1-2, pages 64-75.
Crossref
Peng Jiang, Qian Wang, I. Sabariman & Eckehard Specht. (2014) Experimental Study on Heat Transfer of Pressurized Spray Cooling on the Heated Plate by Using 45° Full Cone Nozzles. Applied Mechanics and Materials 535, pages 32-36.
Crossref
Eckehard Specht. 2014. Dubbel. Dubbel 757 769 .
Satya V. Ravikumar, Jay M. Jha, Soumya S. Mohapatra, Apurva Sinha, Surjya K. Pal & Sudipto Chakraborty. (2013) Experimental study of the effect of spray inclination on ultrafast cooling of a hot steel plate. Heat and Mass Transfer 49:10, pages 1509-1522.
Crossref
Soumya S. Mohapatra, Satya V. Ravikumar, Surjya K. Pal & Sudipto Chakraborty. (2013) Ultra Fast Cooling of a Hot Steel Plate by Using High Mass Flux Air Atomized Spray. steel research international 84:3, pages 229-236.
Crossref
Constantin A. Hernández-Bocanegra, A. Humberto Castillejos E.Francisco A. Acosta-González, Xiaoxu Zhou & Brian G. Thomas. (2013) Measurement of heat flux in dense air-mist cooling: Part I – A novel steady-state technique. Experimental Thermal and Fluid Science 44, pages 147-160.
Crossref
S.B. Tan, P.R. Hornsby, M.B. McAfee, M.P. Kearns & M.P. McCourt. (2012) Water spray cooling of polymers. Polymer Engineering & Science 52:5, pages 1069-1080.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.