Citations (29)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (2)
Amir Moslemi, Mirmehdi Seyyed-Esfahani & Seyed Taghi Akhavan Niaki. (2018) A robust posterior preference multi-response optimization approach in multistage processes. Communications in Statistics - Theory and Methods 47:15, pages 3547-3570.
Read now
Read now
Jen-Ping Peng, Wei-Ching Yeh, Tsung-Chih Lai & Chi-Bin Hsu. (2015) The incorporation of the Taguchi and the VIKOR methods to optimize multi-response problems in intuitionistic fuzzy environments. Journal of the Chinese Institute of Engineers 38:7, pages 897-907.
Read now
Read now
Articles from other publishers (27)
Wei Fang, Yu Zhou, Jiajie Gu, Wenhong Zhao & Binghai Lyu. (2023) Comparison of Taguchi method and grey relational analysis method in process parameter optimization for shear thickening polishing of YAG crystal. The International Journal of Advanced Manufacturing Technology 127:3-4, pages 1597-1608.
Crossref
Crossref
Rakesh Saur, Amar Kumar Kathwas, Pranata Hazra & Barnali Saha. 2023. Geospatial Analytics for Environmental Pollution Modeling. Geospatial Analytics for Environmental Pollution Modeling
141
161
.
Abhinav Kumar Sharma, Indrajit Mukherjee, Sasadhar Bera & Raghu Nandan Sengupta. (2021)
A robust multiobjective solution approach for
mean-variance
optimisation of correlated multiple quality characteristics
. International Journal of Quality & Reliability Management 39:9, pages 2205-2232.
Crossref
Crossref
Abayomi A. Akinwande, Adeolu A. Adediran, Oluwatosin A. Balogun, Moses Ebiowei Yibowei, Abel A. Barnabas, Henry K. Talabi & Bayode J. Olorunfemi. (2022) Optimization of selected casting parameters on the mechanical behaviour of Al 6061/glass powder composites. Heliyon 8:5, pages e09350.
Crossref
Crossref
Kashif Ishfaq, Sadaf Zahoor, Sarmad Ali Khan, Mudassar Rehman, Abdullah Alfaify & Saqib Anwar. (2021) Minimizing the corner errors (top and bottom) at optimized cutting rate and surface finish during WEDM of Al6061. Engineering Science and Technology, an International Journal 24:4, pages 1027-1041.
Crossref
Crossref
Lina Tang, Taho Yang, Yiliu Tu & Yizhong Ma. (2020) Supply chain information sharing under consideration of bullwhip effect and system robustness. Flexible Services and Manufacturing Journal 33:2, pages 337-380.
Crossref
Crossref
Thanh-Phu Nguyen, Thanh-Hoa Doan & Van-Canh Tong. (2021) Multi-objective optimization of WC-12Co coating by high-velocity oxygen fuel spray using multiple regression-based weighted signal-to-noise ratio. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 235:6-7, pages 1168-1178.
Crossref
Crossref
Jesus M. Padilla-Atondo, Jorge Limon-Romero, Armando Perez-Sanchez, Diego Tlapa, Yolanda Baez-Lopez, Cesar Puente & Sinue Ontiveros. (2021) The Impact of Hydrogen on a Stationary Gasoline-Based Engine through Multi-Response Optimization: A Desirability Function Approach. Sustainability 13:3, pages 1385.
Crossref
Crossref
Mohamed Ali Rezgui & Ali Trabelsi. (2020) Use of the stochastic frontier and the grey relational analysis in robust design of multi-objective problems. Concurrent Engineering 28:2, pages 110-129.
Crossref
Crossref
Marcos Almeida Bezerra, Sérgio Luis Costa Ferreira, Cleber Galvão Novaes, Ana Maria Pinto dos Santos, Gisseli Souza Valasques, Uillian Mozart Ferreira da Mata Cerqueira & Juscelia Pereira dos Santos Alves. (2019) Simultaneous optimization of multiple responses and its application in Analytical Chemistry – A review. Talanta 194, pages 941-959.
Crossref
Crossref
Sergio L.C. Ferreira, Valfredo A. Lemos, Vanessa S. de Carvalho, Erik G.P. da Silva, Antonio F.S. Queiroz, Caio S.A. Felix, Daniel L.F. da Silva, Gilson B. Dourado & Rafael V. Oliveira. (2018) Multivariate optimization techniques in analytical chemistry - an overview. Microchemical Journal 140, pages 176-182.
Crossref
Crossref
Yuanchen Fang, Huyang Xu & Nasser Fard. (2017) Neural Network-WPCA Based Method for Multi-Objective Optimal Redundancy Allocation. International Journal of Reliability, Quality and Safety Engineering 24:05, pages 1750024.
Crossref
Crossref
Amir Moslemi & Mirmehdi Seyyed-Esfahani. (2017) Robustness Indices in Multistage Problems. Quality and Reliability Engineering International 33:6, pages 1211-1224.
Crossref
Crossref
Suyi Li & Wenjia Wang. (2016) A general framework for multiple responses optimization based on Bayesian posterior predictive method. A general framework for multiple responses optimization based on Bayesian posterior predictive method.
Hossein Safari, Zahra Faraji & Setareh Majidian. (2014) Identifying and evaluating enterprise architecture risks using FMEA and fuzzy VIKOR. Journal of Intelligent Manufacturing 27:2, pages 475-486.
Crossref
Crossref
Xiaodong Wan, Yuanxun Wang & Dawei Zhao. (2015) Multi-response optimization in small scale resistance spot welding of titanium alloy by principal component analysis and genetic algorithm. The International Journal of Advanced Manufacturing Technology 83:1-4, pages 545-559.
Crossref
Crossref
Marwa S. Elazazy, K. Ganesh, V. Sivakumar & Yasser H. A. Huessein. (2016) Interaction of p-synephrine with p-chloranil: experimental design and multiple response optimization. RSC Advances 6:69, pages 64967-64976.
Crossref
Crossref
Nasser Fard, Huyang Xu & Yuanchen Fang. (2015) A unique solution for principal component analysis-based multi-response optimization problems. The International Journal of Advanced Manufacturing Technology 82:1-4, pages 697-709.
Crossref
Crossref
Taha Hossein Hejazi, Mirmehdi Seyyed-Esfahani & Masoud Mahootchi. (2015) Optimization of Degree of Conformance in Multiresponse-Multistage Systems with a Simulation-based Metaheuristic. Quality and Reliability Engineering International 31:4, pages 645-658.
Crossref
Crossref
Tse-Chang Li, Chang-Fu Han, Chung-Jen Chung, Cheng-Hung Huang & Jen-Fin Lin. (2015)
Effects of Deposition Conditions of TiO
2
Film and Substrate Prestrain on Film Void Geometries and Optical Properties in TiO
2
/PET Specimens
. International Journal of Applied Ceramic Technology 12, pages E217-E230.
Crossref
Crossref
Sheng Nan Zhou & Jian Jun Wang. (2014) An Integrated Approach to Correlated Multi-Response Optimization. Applied Mechanics and Materials 635-637, pages 1750-1754.
Crossref
Crossref
Susanta Kumar Gauri & Surajit Pal. (2013) The principal component analysis (PCA)-based approaches for multi-response optimization: some areas of concerns. The International Journal of Advanced Manufacturing Technology 70:9-12, pages 1875-1887.
Crossref
Crossref
Xiao Hong Tan, Lei Gang Wang & Wen Shen Wang. (2013) Multi-Objective Optimization in Manufacturing Engineering for Slender Pen Rod Injection Molding Quality Based on Grey Correlation. Applied Mechanics and Materials 345, pages 486-493.
Crossref
Crossref
Jen-Ping PengWei-Ching YehTsung-Chih Lai & Chi-Pin Hsu. (2013) Similarity-based method for multiresponse optimization problems with intuitionistic fuzzy sets. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 227:6, pages 908-916.
Crossref
Crossref
Nuno Ricardo Costa, João Lourenço & Zulema Lopes Pereira. (2011) Multiresponse Optimization and Pareto Frontiers. Quality and Reliability Engineering International 28:7, pages 701-712.
Crossref
Crossref
Nuno R. Costa, João Lourenço & Zulema L. Pereira. (2011) Desirability function approach: A review and performance evaluation in adverse conditions. Chemometrics and Intelligent Laboratory Systems 107:2, pages 234-244.
Crossref
Crossref
Surajit Pal & Susanta Kumar Gauri. (2010) Assessing effectiveness of the various performance metrics for multi-response optimization using multiple regression. Computers & Industrial Engineering 59:4, pages 976-985.
Crossref
Crossref