Citations (36)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (1)
F. Naghdi, R. Mahmudi, J.Y. Kang & H.S. Kim. (2015) Contributions of different strengthening mechanisms to the shear strength of an extruded Mg–4Zn–0.5Ca alloy. Philosophical Magazine 95:31, pages 3452-3466.
Read now
Read now
Articles from other publishers (35)
Xin Chen, Chuming Liu, Yingchun Wan, Shunong Jiang, Xiuzhu Han & Zhiyong Chen. (2023) Formation of nanocrystalline AZ31B Mg alloys via cryogenic rotary swaging. Journal of Magnesium and Alloys 11:5, pages 1580-1591.
Crossref
Crossref
Aditya Joshi, George J. Dias & Mark P. Staiger. (2022) Surgically-induced deformation in biodegradable orthopaedic implant devices. Acta Biomaterialia 154, pages 667-675.
Crossref
Crossref
Kristina Kittner, Madlen Ullmann & Ulrich Prahl. (2022) Microstructural and Textural Investigation of an Mg-Zn-Al-Ca Alloy after Hot Plane Strain Compression. Materials 15:21, pages 7499.
Crossref
Crossref
Fatemeh Iranshahi, Mohammad Bagher Nasiri, Fernando Gustavo Warchomicka & Christof Sommitsch. (2022) Investigation of the degradation rate of electron beam processed and friction stir processed biocompatible ZKX50 magnesium alloy. Journal of Magnesium and Alloys 10:3, pages 707-720.
Crossref
Crossref
Viacheslav Bazhenov, Anastasia Lyskovich, Anna Li, Vasily Bautin, Alexander Komissarov, Andrey Koltygin, Andrey Bazlov, Alexey Tokar, Denis Ten & Aigul Mukhametshina. (2021) Effect of Heat Treatment on the Mechanical and Corrosion Properties of Mg–Zn–Ga Biodegradable Mg Alloys. Materials 14:24, pages 7847.
Crossref
Crossref
S. Fida Hassan. (2021) Designing heterogeneous microstructured superior strength-ductility magnesium by blend-press-sinter powder metallurgy process. The International Journal of Advanced Manufacturing Technology 117:5-6, pages 1547-1555.
Crossref
Crossref
Daniela Zander, Paul Zaslansky, Naemi A. Zumdick, Markus Felten, Christian Schnatterer, Veronika F. Chaineux, Jörg U. Hammel, Malte Storm, Fabian Wilde & Claudia Fleck. (2021) The Effect of Chemistry and 3D Microstructural Architecture on Corrosion of Biodegradable Mg–Ca–Zn Alloys. Advanced Engineering Materials 23:11.
Crossref
Crossref
Andrea Mizelli-Ojdanic, Jelena Horky, Bernhard Mingler, Mattia Fanetti, Sandra Gardonio, Matjaz Valant, Bartosz Sulkowski, Erhard Schafler, Dmytro Orlov & Michael J. Zehetbauer. (2021) Enhancing the Mechanical Properties of Biodegradable Mg Alloys Processed by Warm HPT and Thermal Treatments. Materials 14:21, pages 6399.
Crossref
Crossref
V.E. Bazhenov, A.V. Li, A.A. Komissarov, A.V. Koltygin, S.A. Tavolzhanskii, V.A. Bautin, O.O. Voropaeva, A.M. Mukhametshina & A.A. Tokar. (2021) Microstructure and mechanical and corrosion properties of hot-extruded Mg–Zn–Ca–(Mn) biodegradable alloys. Journal of Magnesium and Alloys 9:4, pages 1428-1442.
Crossref
Crossref
Arnab Mahato, Munmun De, Promita Bhattacharjee, Vinod Kumar, Prasenjit Mukherjee, Gajendra Singh, Biswanath Kundu, Vamsi K. Balla & Samit Kumar Nandi. (2021) Role of calcium phosphate and bioactive glass coating on in vivo bone healing of new Mg–Zn–Ca implant. Journal of Materials Science: Materials in Medicine 32:5.
Crossref
Crossref
Darja Steiner Petrovič, Djordje Mandrino, Božidar Šarler, Jelena Horky, Andrea Ojdanic, Michael J. Zehetbauer & Dmytro Orlov. (2020) Surface Analysis of Biodegradable Mg-Alloys after Immersion in Simulated Body Fluid. Materials 13:7, pages 1740.
Crossref
Crossref
S. Fida Hassan, M. T. Islam, S. Nouari, M. M. A. Baig, F. Patel & N. Al-Aqeeli. (2020) Extraordinary Strengthening of Magnesium by Solid-State Diffusion of Copper in Mg-0.5Cu Alloy. JOM 72:4, pages 1597-1606.
Crossref
Crossref
Nikolaus P. Papenberg, Stefan Gneiger, Irmgard Weißensteiner, Peter J. Uggowitzer & Stefan Pogatscher. (2020) Mg-Alloys for Forging Applications—A Review. Materials 13:4, pages 985.
Crossref
Crossref
Wang Rong, Le Qichi, Wang Engang, Wang Tong, Cui Jianzhong, Cao Zhaoxun, Ren Zheng, Cheng Xiangyu & Zhu Xiurong. (2020) Effect of microalloying with Ca and Al on the microstructure, mechanical and corrosion properties of the ZM60 alloy. Materials Research Express 6:12, pages 1265j3.
Crossref
Crossref
M. Cihova, E. Martinelli, P. Schmutz, A. Myrissa, R. Schäublin, A.M. Weinberg, P.J. Uggowitzer & J.F. Löffler. (2019) The role of zinc in the biocorrosion behavior of resorbable Mg‒Zn‒Ca alloys. Acta Biomaterialia 100, pages 398-414.
Crossref
Crossref
S. Fida Hassan, M.T. Islam, S. Nouari, N. Al-Aqeeli, M.M.A. Baig & F. Patel. (2019) Mg6Zn0.4Ca0.5Cu alloy: Physically blended microalloyed lightweight alloy with significantly high strength and ductility. Journal of Alloys and Compounds 787, pages 1015-1022.
Crossref
Crossref
V. Roche, G.Y. Koga, T.B. Matias, C.S. Kiminami, C. Bolfarini, W.J. Botta, R.P. Nogueira & A.M. Jorge Junior. (2019) Degradation of biodegradable implants: The influence of microstructure and composition of Mg-Zn-Ca alloys. Journal of Alloys and Compounds 774, pages 168-181.
Crossref
Crossref
Seung Mi Baek, Hyung Keun Park, Jae Ik Yoon, Jaimyun Jung, Ji Hyun Moon, Seok Gyu Lee, Jae H. Kim, Taek Soo Kim, Sunghak Lee, Nack J. Kim & Hyoung Seop Kim. (2018) Effect of secondary phase particles on the tensile behavior of Mg-Zn-Ca alloy. Materials Science and Engineering: A 735, pages 288-294.
Crossref
Crossref
Hong-xiang Li, Shi-kai Qin, Ying-zhong Ma, Jian Wang, Yun-jin Liu & Ji-shan Zhang. (2018) Effects of Zn content on the microstructure and the mechanical and corrosion properties of as-cast low-alloyed Mg–Zn–Ca alloys. International Journal of Minerals, Metallurgy, and Materials 25:7, pages 800-809.
Crossref
Crossref
Yuzhou Du, Mingyi Zheng, Xiaoguang Qiao & Bailing Jiang. (2017) Enhancing the Strength and Ductility in Mg-Zn-Ce Alloy through Achieving High Density Precipitates and Texture Weakening. Advanced Engineering Materials 19:12, pages 1700487.
Crossref
Crossref
M. Vargas, S. Lathabai, P.J. Uggowitzer, Y. Qi, D. Orlov & Y. Estrin. (2017) Microstructure, crystallographic texture and mechanical behaviour of friction stir processed Mg-Zn-Ca-Zr alloy ZKX50. Materials Science and Engineering: A 685, pages 253-264.
Crossref
Crossref
Sajjad Jafari, R.K. Singh Raman, Chris H.J. Davies, Joelle Hofstetter, Peter J. Uggowitzer & Jörg F. Löffler. (2017) Stress corrosion cracking and corrosion fatigue characterisation of MgZn1Ca0.3 (ZX10) in a simulated physiological environment. Journal of the Mechanical Behavior of Biomedical Materials 65, pages 634-643.
Crossref
Crossref
Rainer Eifler, Florian Schäfke, Hans Jürgen Maier & Christian Klose. 2017. Magnesium Technology 2017. Magnesium Technology 2017
323
327
.
Jake D. Cao, Thomas Weber, Robin Schäublin & Jörg F. Löffler. (2016) Equilibrium ternary intermetallic phase in the Mg–Zn–Ca system. Journal of Materials Research 31:14, pages 2147-2155.
Crossref
Crossref
Y.Z. Du, X.G. Qiao, M.Y. Zheng, D.B. Wang, K. Wu & I.S. Golovin. (2016) Effect of microalloying with Ca on the microstructure and mechanical properties of Mg-6 mass%Zn alloys. Materials & Design 98, pages 285-293.
Crossref
Crossref
M.G. Jiang, C. Xu, T. Nakata, H. Yan, R.S. Chen & S. Kamado. (2016) Development of dilute Mg–Zn–Ca–Mn alloy with high performance via extrusion. Journal of Alloys and Compounds 668, pages 13-21.
Crossref
Crossref
Alok Singh, Althaf B. Dudekula, Naoko Ikeo, Hidetoshi Somekawa & Toshiji Mukai. 2016. Magnesium Technology 2016. Magnesium Technology 2016
83
88
.
Alok Singh, Althaf B. Dudekula, Naoko Ikeo, Hidetoshi Somekawa & Toshiji Mukai. 2016. Magnesium Technology 2016. Magnesium Technology 2016
83
88
.
Y.Z. Du, X.G. Qiao, M.Y. Zheng, K. Wu & S.W. Xu. (2015) Development of high-strength, low-cost wrought Mg–2.5mass% Zn alloy through micro-alloying with Ca and La. Materials & Design 85, pages 549-557.
Crossref
Crossref
J. Hofstetter, S. Rüedi, I. Baumgartner, H. Kilian, B. Mingler, E. Povoden-Karadeniz, S. Pogatscher, P.J. Uggowitzer & J.F. Löffler. (2015) Processing and microstructure–property relations of high-strength low-alloy (HSLA) Mg–Zn–Ca alloys. Acta Materialia 98, pages 423-432.
Crossref
Crossref
J. Hofstetter, E. Martinelli, S. Pogatscher, P. Schmutz, E. Povoden-Karadeniz, A.M. Weinberg, P.J. Uggowitzer & J.F. Löffler. (2015) Influence of trace impurities on the in vitro and in vivo degradation of biodegradable Mg–5Zn–0.3Ca alloys. Acta Biomaterialia 23, pages 347-353.
Crossref
Crossref
Y.Z. Du, X.G. Qiao, M.Y. Zheng, K. Wu & S.W. Xu. (2015) The microstructure, texture and mechanical properties of extruded Mg–5.3Zn–0.2Ca–0.5Ce (wt%) alloy. Materials Science and Engineering: A 620, pages 164-171.
Crossref
Crossref
K. Illkova, P. Dobroň, F. Chmelík, K.U. Kainer, J. Balík, S. Yi, D. Letzig & J. Bohlen. (2014) Effect of aluminium and calcium on the microstructure, texture, plastic deformation and related acoustic emission of extruded magnesium–manganese alloys. Journal of Alloys and Compounds 617, pages 253-264.
Crossref
Crossref
J. Hofstetter, M. Becker, E. Martinelli, A. M. Weinberg, B. Mingler, H. Kilian, S. Pogatscher, P. J. Uggowitzer & J. F. Löffler. (2014) High-Strength Low-Alloy (HSLA) Mg–Zn–Ca Alloys with Excellent Biodegradation Performance. JOM 66:4, pages 566-572.
Crossref
Crossref
Karin Pichler, Stefan Fischerauer, Peter Ferlic, Elisabeth Martinelli, Hans-Peter Brezinsek, Peter J. Uggowitzer, Jörg F. Löffler & Annelie-Martina Weinberg. (2014) Immunological Response to Biodegradable Magnesium Implants. JOM 66:4, pages 573-579.
Crossref
Crossref