336
Views
26
CrossRef citations to date
0
Altmetric
Articles

Introduction to the metallurgic characteristics of advanced high-strength steels for automobile applications

&
Pages 610-618 | Published online: 07 Oct 2008

Keep up to date with the latest research on this topic with citation updates for this article.

Read on this site (3)

Yiwen Wang, Yuejie Ding, Yihan Jiang, Wurong Wang, Yangyang Zhao & Xicheng Wei. (2022) The Effects of Die Temperature and Cooling Condition on Friction Behavior of Bare 22MnB5 Boron Steel in Hot Stamping. Tribology Transactions 65:3, pages 519-530.
Read now
S. T. Wei, D. Lv, R. D. Liu, L. Lin, R. J. Xu, J. Y. Guo & K. Q. Wang. (2014) Similar and dissimilar resistance spot welding of advanced high strength steels: welding and heat treatment procedures, structure and mechanical properties. Science and Technology of Welding and Joining 19:5, pages 427-435.
Read now
H Gaul, G Weber & M Rethmeier. (2011) Influence of HAZ cracks on fatigue resistance of resistance spot welded joints made of advanced high strength steels. Science and Technology of Welding and Joining 16:5, pages 440-445.
Read now

Articles from other publishers (23)

Huan Teng, Yiwen Wang, Wurong Wang, Yangyang Zhao, Xicheng Wei & Hongshan Zhao. (2023) The Oxide Layer of 10Mn5 Medium Manganese Steel for Wear Protection in High-Temperature Friction during Hot Stamping. Coatings 13:3, pages 570.
Crossref
Tae-Ung Song, Je-Sik Shin & Chang-Yeol Jeong. (2022) Fatigue Properties of Rolled Steel Sheets for Automotive Structure. Journal of Materials Engineering and Performance 31:10, pages 8304-8313.
Crossref
Kwangsoo Kim, Namhyun Kang, Minjung Kang & Cheolhee Kim. (2021) Assessment of Heat-Affected Zone Softening of Hot-Press-Formed Steel over 2.0 GPa Tensile Strength with Bead-On-Plate Laser Welding. Applied Sciences 11:13, pages 5774.
Crossref
A. Sajek. (2020) Welding Thermal Cycles of Joints Made of S1100QL Steel by Saw and Hybrid Plasma-Mag Processes. Advances in Materials Science 20:4, pages 75-86.
Crossref
Hanwen Yang, Yiming Sun, Caiwang Tan, Xiaoye Zhao, Bo Chen, Xiaoguo Song, Wei Guo & Jicai Feng. (2020) Influence of Al–Si coating on microstructure and mechanical properties of fiber laser welded and then press-hardened 22MnB5 steel. Materials Science and Engineering: A 794, pages 139918.
Crossref
Tarun Nanda, Vishal Singh, Virender Singh, Arnab Chakraborty & Sandeep Sharma. (2016) Third generation of advanced high-strength steels: Processing routes and properties. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 233:2, pages 209-238.
Crossref
Manashi Adhikary, Arnab Chakraborty, Anindya Das, Venugopalan T & Ravi Kumar B. (2018) Influence of annealing texture on dynamic tensile deformation characteristics of Dual phase steel. Materials Science and Engineering: A 736, pages 209-218.
Crossref
K I Yaakob, M Ishak, S R A Idris, M H Aiman & N Z Khalil. (2017) Hardness variation of welded boron steel using continuous wave (CW) and pulse wave (PW) mode of fiber laser. IOP Conference Series: Materials Science and Engineering 238, pages 012007.
Crossref
Kaab Omer, Lukas ten Kortenaar, Clifford Butcher, Michael Worswick, Skye Malcolm & Duane Detwiler. (2017) Testing of a hot stamped axial crush member with tailored properties – Experiments and models. International Journal of Impact Engineering 103, pages 12-28.
Crossref
Julian Frei, Hubert Suwala, Andrey Gumenyuk & Michael Rethmeier. (2016) Bestimmung der Rissanfälligkeit von hochfesten Stählen beim Widerstandspunktschweißen. Materials Testing 58:7-8, pages 612-616.
Crossref
Minjung Kang, Young-Min Kim & Cheolhee Kim. (2016) Effect of heating parameters on laser welded tailored blanks of hot press forming steel. Journal of Materials Processing Technology 228, pages 137-144.
Crossref
N.K. Tewary, S.K. Ghosh, Supriya Bera, D. Chakrabarti & S. Chatterjee. (2014) Influence of cold rolling on microstructure, texture and mechanical properties of low carbon high Mn TWIP steel. Materials Science and Engineering: A 615, pages 405-415.
Crossref
Young Nam Ahn, Min Jung Kang & Cheol Hee Kim. (2014) Analysis of Laser Weldments for Dual-Phase and Martensitic Steel Sheets for Automotive Applications. Defect and Diffusion Forum 353, pages 8-12.
Crossref
Michael Rethmeier. (2014) Influence of Weld Imperfections on the Fatigue Behaviour of Resistance Spot Welded Advanced High Strength Steels. Advanced Materials Research 891-892, pages 1445-1450.
Crossref
Gert Weber, Stephan Brauser, Holger Gaul & Michael Rethmeier. (2012) Study of Fatigue Behavior for Spot Welded Tensile Shear Specimens of Advanced High Strength Steels. steel research international 83:10, pages 988-994.
Crossref
Christian Ullner, Stephan Brauser, Andreas Subaric-Leitis, Gert Weber & Michael Rethmeier. (2011) Determination of local stress?strain properties of resistance spot-welded joints of advanced high-strength steels using the instrumented indentation test. Journal of Materials Science 47:3, pages 1504-1513.
Crossref
Holger Gaul, Stephan Brauser, Gert Weber & Michael Rethmeier. (2013) Methods to Obtain Weld Discontinuities in Spot-Welded Joints Made of Advanced High-Strength Steels. Welding in the World 55:11-12, pages 99-106.
Crossref
Min Jung Kang & Cheol Hee Kim. (2011) Analysis of Laser and Resistance Spot Weldments on Press-Hardened Steel. Materials Science Forum 695, pages 202-205.
Crossref
C. Kim, M.J. Kang & Y.D. Park. (2011) Laser welding of Al-Si coated hot stamping steel. Procedia Engineering 10, pages 2226-2231.
Crossref
Holger Gaul & Gert Weber. 2011. Hybrid Adhesive Joints. Hybrid Adhesive Joints 37 77 .
S. Brauser, L.A. Pepke, G. Weber & M. Rethmeier. (2010) Deformation behaviour of spot-welded high strength steels for automotive applications. Materials Science and Engineering: A 527:26, pages 7099-7108.
Crossref
G. Weber, T. Bschorr, H. Cramer, O. Hahn, M. Rethmeier & H. Thommes. 2010. Materials with Complex Behaviour. Materials with Complex Behaviour 343 372 .
A. Saeed-Akbari, J. Imlau, U. Prahl & W. Bleck. (2009) Derivation and Variation in Composition-Dependent Stacking Fault Energy Maps Based on Subregular Solution Model in High-Manganese Steels. Metallurgical and Materials Transactions A 40:13, pages 3076-3090.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.