Citations (30)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (1)
N. A. Kozyrev, R. E. Kryukov, A. S. Nepomnyashchikh, A. A. Usoltsev & M. V. Popova. (2020) Development of a new flux-cored wire based on the gas cleaning dust of the silicomanganese. Welding International 34:10-12, pages 455-459.
Read now
Read now
Articles from other publishers (29)
N. A. KOZYREV, S. N. ZUEVA, E. V. POLEVOI, R. E. KRYUKOV & A. A. SYCHEV. (2022) STUDY OF THE EFFECT OF TITANIUM INTRODUCTION INTO THE FLUX-CORED WIRE COATING OF THE Fe‒C‒Si‒Mn‒Сr‒Mo‒Ni SYSTEM. Ferrous Metallurgy. Bulletin of Scientific , Technical and Economic Information 78:10, pages 886-895.
Crossref
Crossref
Jiamei Wang, Chengning Li, Xinjie Di & Dongpo Wang. (2022) Effect of Cu Content on Microstructure and Mechanical Properties for High-Strength Deposited Metals Strengthened by Nano-Precipitation. Metals 12:8, pages 1360.
Crossref
Crossref
Radu Ioachim Comăneci & Constantin Mirea. (2022) Investigation on Failure Conditions in DRAWING METAL POWDER-CORED RODS. International Journal of Modern Manufacturing Technologies 14:1, pages 39-44.
Crossref
Crossref
N. A. Kozyrev, I. V. Osetkovskii, A. A. Usol’tsev, E. V. Polevoi & A. R. Mikhno. (2022) Composition of non-metallic inclusions and microstructure of electric arc coating formed using the flux-cored wire of Fe – C – Si – Mn – Сr – Ni – Mo system. Izvestiya. Ferrous Metallurgy 65:6, pages 421-426.
Crossref
Crossref
N. A. Kozyrev, I. V. Osetkovskii, A. A. Usol’tsev, E. V. Polevoi & A. R. Mikhno. (2022) Composition of Non-Metallic Inclusions and Microstructure of Electric Arc Coating Formed Using the Flux-Cored Wire of Fe–C–Si–Mn–Cr–Mo System. Steel in Translation 52:6, pages 581-585.
Crossref
Crossref
N. A. KOZYREV, I. V. OSETKOVSKII, A. A. USOL’TSEV, E. V. POLEVOI & A. R. MIKHNO. (2022) STUDY OF COMPOSITION OF NONMETALLIC INCLUSIONS AND MICROSTRUCTURE OF ELECTRIC ARC COATING FORMED USING FLUX-CORED WIRE OF THE Fe‒C‒Si‒Mn‒Сr‒Ni‒Mo SYSTEM. Ferrous Metallurgy. Bulletin of Scientific , Technical and Economic Information 78:3, pages 264-270.
Crossref
Crossref
N. A. Kozyrev, A. A. Usol’tsev, A. I. Gusev, A. R. Mikhno & V. E. Gromov. (2022) Elemental and phase composition of electric arc coating formed with a flux-cored wire of Fe – C – Si – Mn – Сr – Ni – Mo system. Izvestiya. Ferrous Metallurgy 65:2, pages 120-126.
Crossref
Crossref
N. A. Kozyrev, R. E. Kryukov, A. A. Usol’tsev, N. V. Kibko & L. P. Bashchenko. (2022) Development of a new cored wire based on silica manganese gas-cleaning dust. Izvestiya. Ferrous Metallurgy 64:12, pages 863-869.
Crossref
Crossref
Jiamei Wang, Xinjie Di, Chengning Li & Dongpo Wang. (2022) Characterization of nanoscale precipitates and enhanced mechanical properties of high strength weld metals containing Cu additions after PWHT. Metallurgical Research & Technology 119:1, pages 119.
Crossref
Crossref
Jiamei Wang, Xinjie Di, Chengning Li & Dongpo Wang. (2021) The Influence of Ni on Bainite/Martensite Transformation and Mechanical Properties of Deposited Metals Obtained from Metal-Cored Wire. Metals 11:12, pages 1971.
Crossref
Crossref
N. A. Kozyrev, R. E. Kryukov, A. A. Usol’tsev, N. V. Kibko & L. P. Bashchenko. (2022) Development of a Novel Flux-Cored Wire Based on Silicomanganese Gas-Purification Dust. Steel in Translation 51:12, pages 847-852.
Crossref
Crossref
N. A. Kozyrev, R. E. Kryukov, V. F. Goryushkin, A. N. Prudnikov & Yu. V. Bendre. (2020) Thermodynamic features of chrome oxides reduction by carbon at electric arc discharge using cored wires. Ferrous Metallurgy. Bulletin of Scientific , Technical and Economic Information 75:10, pages 1159-1168.
Crossref
Crossref
Bogdan Trembach, Aleksandr Grin, Nataliia Makarenko, Serhii Zharikov, Illia Trembach & Oleg Markov. (2020) Influence of the core filler composition on the recovery of alloying elements during the self-shielded flux-cored arc welding. Journal of Materials Research and Technology 9:5, pages 10520-10528.
Crossref
Crossref
R. E. Kryukov, V. F. Goryushkin, Yu. V. Bendre, L. P. Bashchenko & N. A. Kozyrev. (2020) Thermodynamic aspects of Cr<sub>2</sub>O<sub>3</sub> reduction by carbon. Izvestiya. Ferrous Metallurgy 62:12, pages 950-956.
Crossref
Crossref
R. E. Kryukov, V. F. Goryushkin, Yu. V. Bendre, L. P. Bashchenko & N. A. Kozyrev. (2020) Thermodynamic Aspects of Cr2O3 Reduction by Carbon. Steel in Translation 49:12, pages 843-847.
Crossref
Crossref
N A Kozyrev, A A Usoltsev, R E Kryukov, A I Gusev & I V Osetkovskiy. (2019) Operational factors of new flux cored wires of the Fe–C–Si–Mn–Cr–Ni–Mo system for surfacing of protective plates of shearer cutting drums. IOP Conference Series: Earth and Environmental Science 377:1, pages 012022.
Crossref
Crossref
N. A. Kozyrev, A. A. Usol’tsev, R. E. Kryukov, A. I. Gusev & I. V. Osetkovskii. (2019) Operation indices of the new cored wire of Fe−C−Si−Мn−Сr−Ni−Mo system. Ferrous Metallurgy. Bulletin of Scientific , Technical and Economic Information 75:7, pages 860-868.
Crossref
Crossref
N. A. Kozyrev, R. E. Kryukov, V. M. Shurupov, N. V. Kibko & L. P. Bashchenko. (2019) TUNGSTEN RECOVERY FROM OXIDE DURING FLUX CORD WIRE SURFACING. Izvestiya. Ferrous Metallurgy 62:3, pages 215-221.
Crossref
Crossref
R. E. Kryukov, Yu. V. Bendre, V. F. Goryushkin, N. A. Kozyrev & V. M. Shurupov. (2019) SOME THERMODYNAMIC ASPECTS OF WO3 REDUCTION BY ALUMINUM. Izvestiya. Ferrous Metallurgy 62:2, pages 128-133.
Crossref
Crossref
N. A. Kozyrev, R. E. Kryukov, V. M. Shurupov, N. V. Kibko & L. P. Bashchenko. (2019) Reduction of Tungsten from Its Oxide in Surfacing by Means of Powder-Core Wire. Steel in Translation 49:3, pages 157-162.
Crossref
Crossref
A. I. Gusev, A. A. Usol’tsev, N. A. Kozyrev, N. V. Kibko & L. P. Bashchenko. (2018) Development of flux-cored wire for surfacing of parts operating under conditions of wear. Izvestiya Visshikh Uchebnykh Zavedenii. Chernaya Metallurgiya = Izvestiya. Ferrous Metallurgy 61:11, pages 898-906.
Crossref
Crossref
N A Kozyrev, R E Kryukov, A A Usoltsev, N V Kibko & A S Nepomnyashchikh. (2018) Development of a new wear-resistant flux cored wire for welding armor on the buckets of mining equipment. IOP Conference Series: Earth and Environmental Science 206, pages 012035.
Crossref
Crossref
A I Gusev, N A Kozyrev, A A Usoltsev, R E Kryukov & A R Mikhno. (2018) Development of a flux-cored wire for surfacing mining equipment operating in the conditions of shock-abrasive wear. IOP Conference Series: Earth and Environmental Science 206, pages 012034.
Crossref
Crossref
A. I. Gusev, A. A. Usol’tsev, N. A. Kozyrev, N. V. Kibko & L. P. Bashchenko. (2019) Flux-Cored Wire for the Surfacing of Parts Subject to Wear. Steel in Translation 48:11, pages 724-731.
Crossref
Crossref
A.I. Gusev, N.A. Kozyrev, I.V. Osetkovskiy & A.A. Usoltsev. (2018) Developing New Powder Wire for Surfacing Details which Works in the Wear Resistance Conditions. Materials Science Forum 927, pages 126-133.
Crossref
Crossref
Aleksander I Gusev, Nikolay A Kozyrev, Ivan V Osetkovskiy, Roman E Kryukov & Olga A Kozyreva. (2017) Quality of Metal Deposited Flux Cored Wire With the System Fe-C-Si-Mn-Cr-Mo-Ni-V-Co. IOP Conference Series: Materials Science and Engineering 253, pages 012008.
Crossref
Crossref
I.V. Osetkovskiy, N.A. Kozyrev & R.E. Kryukov. (2017) Studying the Influence of Tungsten and Chromium Additives in Flux Cored Wire System Fe-C-Si-Mn-Mo-Ni-V-Co on Surfaced Metal Properties. Materials Science Forum 906, pages 107-113.
Crossref
Crossref
A I Gusev, N A Kozyrev, A A Usoltsev, R E Kryukov & I V Osetkovsky. (2017) Study of the properties of flux cored wire of Fe-C-Si-Mn-Cr-Mo-Ni-V-Co system for the strengthening of nodes and parts of equipment used in the mineral mining. IOP Conference Series: Earth and Environmental Science 84, pages 012018.
Crossref
Crossref
A.I. Gusev, N.A. Kozyrev, I.V. Osetkovskiy, O.A. Kozyreva & D.V. Valuev. (2017) Quality of Metal Deposited Flux Cored Wire with the System Fe-C-Si-Mn-Cr-Mo-Ni-V-Co. Key Engineering Materials 736, pages 23-28.
Crossref
Crossref