Carlos Alberto Barrera-Diaz, Amir Nourmohammadi, Henrik Smedberg, Tehseen Aslam & Amos H. C. Ng. (2023) An Enhanced Simulation-Based Multi-Objective Optimization Approach with Knowledge Discovery for Reconfigurable Manufacturing Systems. Mathematics 11:6, pages 1527.
Crossref
Julia Reisinger, Maria Antonia Zahlbruckner, Iva Kovacic, Peter Kán, Xi Wang-Sukalia & Hannes Kaufmann. (2022) Integrated multi-objective evolutionary optimization of production layout scenarios for parametric structural design of flexible industrial buildings. Journal of Building Engineering 46, pages 103766.
Crossref
Abdul Salam Khan, Lazhar Homri, Jean Yves Dantan & Ali Siadat. (2022) An analysis of the theoretical and implementation aspects of process planning in a reconfigurable manufacturing system. The International Journal of Advanced Manufacturing Technology 119:9-10, pages 5615-5646.
Crossref
Muhammed Ameer & Mohammed Dahane. (2022) Reconfiguration effort based optimization for design problem of Reconfigurable Manufacturing System. Procedia Computer Science 200, pages 1264-1273.
Crossref
Zeren Zhang, Lyes Benyoucef & Ali Sialat. (2022) Sustainable Integrated Process Planning and Scheduling (IPPS) in RMS: Past, Present and Future. IFAC-PapersOnLine 55:10, pages 791-797.
Crossref
Qihao Liu, Xinyu Li & Liang Gao. (2021) A Novel MILP Model Based on the Topology of a Network Graph for Process Planning in an Intelligent Manufacturing System. Engineering 7:6, pages 807-817.
Crossref
Qihao Liu, Xinyu Li & Liang Gao. (2020) Mathematical modeling and a hybrid evolutionary algorithm for process planning. Journal of Intelligent Manufacturing 32:3, pages 781-797.
Crossref
Prince Pal Singh, Jatinder Madan & Harwinder Singh. 2021. Sustainable Development Through Engineering Innovations. Sustainable Development Through Engineering Innovations
457
466
.
Faycal A. Touzout, Hichem Haddou Benderbal, Amirhossein Khezri & Lyes Benyoucef. 2021. Heuristics for Optimization and Learning. Heuristics for Optimization and Learning
1
15
.
Osama Abdulhameed, Abdulrahman Al-Ahmari, Syed Hammad Mian, Abdulmajeed Dabwan & Hisham Alkhalefah. (2020) Evolution of Computer-Aided Process Planning for Hybrid Additive/Subtractive Process. Advances in Materials Science and Engineering 2020, pages 1-21.
Crossref
A. Khezri, H. Haddou Benderbal & Lyes Benyoucef. 2020. Reconfigurable Manufacturing Systems: From Design to Implementation. Reconfigurable Manufacturing Systems: From Design to Implementation
161
177
.
Kamal Khanna & Rakesh Kumar. (2019) Reconfigurable manufacturing system: a state-of-the-art review. Benchmarking: An International Journal 26:8, pages 2608-2635.
Crossref
Osama Abdulhameed, Abdurahman Mushabab Al-Ahmari, Wadea Ameen & Syed Hammad Mian. (2018) Novel dynamic CAPP system for hybrid additive–subtractive–inspection process. Rapid Prototyping Journal 24:6, pages 988-1002.
Crossref
Eram Asghar, Uzair Khaleeq uz Zaman, Aamer Ahmed Baqai & Lazhar Homri. (2018) Optimum machine capabilities for reconfigurable manufacturing systems. The International Journal of Advanced Manufacturing Technology 95:9-12, pages 4397-4417.
Crossref
Syed Maaz Hasan, Sajid Ullah Butt & Aamer Ahmed Baqai. (2018) A petri-net model for scalable systems with variable stages based on changing product demands. Procedia Manufacturing 17, pages 198-205.
Crossref
Ana Vafadar, Kevin Hayward & Majid Tolouei-Rad. (2017) Drilling reconfigurable machine tool selection and process parameters optimization as a function of product demand. Journal of Manufacturing Systems 45, pages 58-69.
Crossref
Andreas Hees, Corné S. L. Schutte & Gunther Reinhart. (2017) A production planning system to continuously integrate the characteristics of reconfigurable manufacturing systems. Production Engineering 11:4-5, pages 511-521.
Crossref
Fei Tao, Luning Bi, Ying Zuo & A. Y. C. Nee. (2017) A Cooperative Co-Evolutionary Algorithm for Large-Scale Process Planning With Energy Consideration. Journal of Manufacturing Science and Engineering 139:6.
Crossref
Jianping Dou, Jun Li & Chun Su. (2016) Bi-objective optimization of integrating configuration generation and scheduling for reconfigurable flow lines using NSGA-II. The International Journal of Advanced Manufacturing Technology 86:5-8, pages 1945-1962.
Crossref
Ping Liu, Qiang Zhang & Jurgen Pannek. (2016) Capacity adjustment of job shop manufacturing systems with RMTs. Capacity adjustment of job shop manufacturing systems with RMTs.
Mohammed Dahane & Lyes Benyoucef. 2016. Metaheuristics for Production Systems. Metaheuristics for Production Systems
109
130
.
C. Renzi, F. Leali, M. Cavazzuti & A. O. Andrisano. (2014) A review on artificial intelligence applications to the optimal design of dedicated and reconfigurable manufacturing systems. The International Journal of Advanced Manufacturing Technology 72:1-4, pages 403-418.
Crossref
Abderrahmane Bensmaine, Mohammed Dahane & Lyes Benyoucef. (2013) A non-dominated sorting genetic algorithm based approach for optimal machines selection in reconfigurable manufacturing environment. Computers & Industrial Engineering 66:3, pages 519-524.
Crossref
Abderahmane Bensmaine, Mohammed Dahane & Lyes Benyoucef. (2013) AMOSA Based Approach for Process Plan Generation in Reconfigurable Manufacturing System with Machine Load Balancing. AMOSA Based Approach for Process Plan Generation in Reconfigurable Manufacturing System with Machine Load Balancing.
Nina Sundstrom & Bengt Lennartson. (2013) Event- and time-based design of operation sequences with uncertainties in execution times. Event- and time-based design of operation sequences with uncertainties in execution times.
A. Bensmaine, M. Dahane & L. Benyoucef. (2013) A Simulation-based Genetic Algorithm Approach for Process Plans Selection in Uncertain Reconfigurable Environment. IFAC Proceedings Volumes 46:9, pages 1961-1966.
Crossref
Kristofer Bengtsson, Bengt Lennartson, Oscar Ljungkrantz & Chengyin Yuan. (2013) Developing control logic using aspect-oriented programming and sequence planning. Control Engineering Practice 21:1, pages 12-22.
Crossref
A. Bensmaine, M. Dahane & L. Benyoucef. (2012) Process Plan Generation in Reconfigurable Manufacturing Systems using AMOSA and TOPSIS. IFAC Proceedings Volumes 45:6, pages 560-565.
Crossref
Kristofer Bengtsson, Patrik Bergagard, Carl Thorstensson, Bengt Lennartson, Knut Akesson, Chengyin Yuan, Sajed Miremadi & Petter Falkman. (2012) Sequence Planning Using Multiple and Coordinated Sequences of Operations. IEEE Transactions on Automation Science and Engineering 9:2, pages 308-319.
Crossref
Abderahmane Bensmaine, Mohammed Dahane & Lyes Benyoucef. (2011) Simulation-based NSGA-II approach for multi-unit process plans generation in reconfigurable manufacturing system. Simulation-based NSGA-II approach for multi-unit process plans generation in reconfigurable manufacturing system.
Abderrahmane Bensmaine, Lyes Benyoucef & Mohammed Dahane. (2011) Process plan generation in reconfigurable manufacturing systems using adapted NSGA-II and AMOSA. Process plan generation in reconfigurable manufacturing systems using adapted NSGA-II and AMOSA.
Kristofer Bengtsson, Carl Thorstensson, Bengt Lennartson, Knut Åkesson, Chengyin Yuan, Sajed Miremadi & Petter Falkman. (2010) Relations identification and visualization for sequence planning and automation design. Relations identification and visualization for sequence planning and automation design.
Hoda A. ElMaraghy. 2009. Changeable and Reconfigurable Manufacturing Systems. Changeable and Reconfigurable Manufacturing Systems
25
45
.