http://orcid.org/0000-0002-7416-1312
Citations (37)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (8)
Reza Imaninasab, Luis Loria-Salazar & Alan Carter. (2023) Impact of aggregate structure restoration on rutting resistance of asphalt mixtures with very high percentages of RAP. Road Materials and Pavement Design 0:0, pages 1-17.
Read now
Read now
Ali Moniri, Hassan Ziari, Amir Amini & Mojtaba Hajiloo. (2022) Investigating the ANN model for cracking of HMA in terms of temperature, RAP and fibre content. International Journal of Pavement Engineering 23:3, pages 545-557.
Read now
Read now
Runhua Zhang, Jo E. Sias & Eshan V. Dave. (2022) Development of new performance indices to evaluate the fatigue properties of asphalt binders with ageing. Road Materials and Pavement Design 23:2, pages 377-396.
Read now
Read now
Hassan Ziari, Amir Amini, Ali Moniri & Mahdi Habibpour. (2021) Using the GMDH and ANFIS methods for predicting the crack resistance of fibre reinforced high RAP asphalt mixtures. Road Materials and Pavement Design 22:10, pages 2248-2266.
Read now
Read now
Ali Moniri, Hassan Ziari, M. R. M. Aliha & Yasha Saghafi. (2021) Laboratory study of the effect of oil-based recycling agents on high RAP asphalt mixtures. International Journal of Pavement Engineering 22:11, pages 1423-1434.
Read now
Read now
Hasan Ziari, Yasha Saghafi, Ali Moniri & Parastoo Bahri. (2020) The effect of polyolefin-aramid fibers on performance of hot mix asphalt. Petroleum Science and Technology 38:3, pages 170-176.
Read now
Read now
Hassan Ziari, Ali Moniri, Parastoo Bahri & Yasha Saghafi. (2019) Evaluation of performance properties of 50% recycled asphalt mixtures using three types of rejuvenators. Petroleum Science and Technology 37:23, pages 2355-2361.
Read now
Read now
Hassan Ziari, Ali Moniri & Navid Norouzi. (2019) The effect of nanoclay as bitumen modifier on rutting performance of asphalt mixtures containing high content of rejuvenated reclaimed asphalt pavement. Petroleum Science and Technology 37:17, pages 1946-1951.
Read now
Read now
Articles from other publishers (29)
Ammar Alnmr & Richard Ray. (2023) Investigating the Impact of Varying Sand Content on the Physical Characteristics of Expansive Clay Soils from Syria. Geotechnical and Geological Engineering.
Crossref
Crossref
Hossein Maleki Toulabi, Seyed Azim Hosseini & Leila Haj Najafi. (2023) Investigating the effect of using recycled waste concrete powder (RWCP) on the performance of thin layer surface treatment: Microsurfacing. Construction and Building Materials 400, pages 132734.
Crossref
Crossref
Marko Orešković, João Santos, Goran Mladenović & Vladana Rajaković-Ognjanović. (2023) The feasibility of using copper slag in asphalt mixtures for base and surface layers based on laboratory results. Construction and Building Materials 384, pages 131285.
Crossref
Crossref
Jialei Li, Yalong Liao, Haifei Ma, Qingfeng Liu & Yue Wu. (2023) Review on Comprehensive Recovery Valuable Metals and Utilization of Copper Slag. Journal of Sustainable Metallurgy 9:2, pages 439-458.
Crossref
Crossref
Mansour Fakhri, Sajad JavadiMohammad Amin Norouzi, Behnam Baveli BahmaiMohammad M. Karimi. (2023) The Induced Heating–Healing of Inductive Warm-Mix Asphalt Mixture Containing Copper-Slag Filler. Journal of Materials in Civil Engineering 35:4.
Crossref
Crossref
Shaban Ismael Albrka ALI, Dania ALOTHMAN & Hüseyin GÖKÇEKUŞ. (2023) Rheological Performance of ZycoTherm/Nano-Silica Composite Modified Binders at High and Low Temperatures. Turkish Journal of Civil Engineering 34:2, pages 77-102.
Crossref
Crossref
Mansour Fakhri, Sajad Javadi, Pooyan Ayar, Ali Ghodrati & Behnam Baveli Bahmai. (2022) Moisture Susceptibility, Deicing, and Self-Healing Characteristics of Sasobit-Modified Warm Mix Asphalt Containing Basic Oxygen Furnace Filler. Iranian Journal of Science and Technology, Transactions of Civil Engineering 46:6, pages 4719-4735.
Crossref
Crossref
Ali Zalnezhad, Seyed Azim Hosseini, Reza Shirinabadi & Mohammad Emami Korandeh. (2022) Feasibility of using copper slag as natural aggregate replacement in microsurfacing for quality enhancement: Microscopic and mechanical analysis. Construction and Building Materials 354, pages 129175.
Crossref
Crossref
Andrea Rojas-Pardo, Osvaldo Muñoz-Cáceres, Aitor C. Raposeiras, Diana Movilla-Quesada & Daniel Castro-Fresno. (2022) UV curing study of semi-dense asphalt mixes with different sizes of copper slag – A sustainable rehabilitation and production strategy. Construction and Building Materials 347, pages 128621.
Crossref
Crossref
Ishfaq Mohi Ud Din & Mohammad Shafi Mir. (2021) Laboratory Study on the use of Reclaimed Asphalt Pavement and Copper Slag in Warm Mix Asphalt Pavements using Waste Engine Oil as a Rejuvenator. International Journal of Pavement Research and Technology 15:3, pages 547-559.
Crossref
Crossref
Saeed Fatemi, Jafar Bolouri Bazaz & Seyed Ali Ziaee. (2022) Investigating the Effect of Calcium Lignosulfonate on the Durability and Performance of Asphalt Mixtures. Advances in Materials Science and Engineering 2022, pages 1-14.
Crossref
Crossref
Mohammad Reza Pour Ebrahim Akhtari, Ali Abdi Kordani & Mohammad Zarei. (2021) Low-Temperature Fracture Toughness Study for Hot Mix Asphalt and Warm Mix Asphalt Under Pure Mode I and II Loading Condition. International Journal of Pavement Research and Technology 15:2, pages 320-332.
Crossref
Crossref
Mansour Fakhri, Sajad Javadi, Alireza Sassani & Mohsen Torabi-Dizaji. (2022) Zinc Slag as a Partial or Total Replacement for Mineral Filler in Warm Mix Asphalt and Its Effects on Self-Healing Capacity and Performance Characteristics. Materials 15:3, pages 736.
Crossref
Crossref
Fei Jin. 2022. Low Carbon Stabilization and Solidification of Hazardous Wastes. Low Carbon Stabilization and Solidification of Hazardous Wastes
321
341
.
Osvaldo Muñoz-Cáceres, Aitor C. Raposeiras, Diana Movilla-Quesada, Daniel Castro-Fresno, Manuel Lagos-Varas, Valerio C. Andrés-Valeri & Gonzalo Valdés-Vidal. (2021) Mechanical performance of sustainable asphalt mixtures manufactured with copper slag and high percentages of reclaimed asphalt pavement. Construction and Building Materials 304, pages 124653.
Crossref
Crossref
Aitor C. Raposeiras, Diana Movilla-Quesada, Osvaldo Muñoz-Cáceres, Valerio C. Andrés-Valeri & Manuel Lagos-Varas. (2021) Production of asphalt mixes with copper industry wastes: Use of copper slag as raw material replacement. Journal of Environmental Management 293, pages 112867.
Crossref
Crossref
Zülal Akbay Arama. (2021) Experimental and numerical study to investigate the usability of walnut shell waste as an additive for foundations of highway embankments. Arabian Journal of Geosciences 14:18.
Crossref
Crossref
Dinesh Kumar Sharma, B.L. Swami & Ashok Kumar Vyas. (2021) Performance evaluation of hot mix asphalt containing copper slag. Materials Today: Proceedings 38, pages 1241-1244.
Crossref
Crossref
Hailian Li, Peipei Tong, Xijun Zhang, Xixiong Lin & Bo Li. (2020) Influence of Ultraviolet and Oxygen Coupling Aging on Rheological Properties and Functional Group Index of Warm Mix Asphalt Binder. Materials 13:19, pages 4216.
Crossref
Crossref
Ishfaq Mohi Ud Din & Mohammad Shafi Mir. (2020) Laboratory study on the use of copper slag and RAP in WMA pavements. Innovative Infrastructure Solutions 5:2.
Crossref
Crossref
Jiaqiu Xu, Enhui Yang, Haoyuan Luo & Haibo Ding. (2020) Effects of warm mix additives on the thermal stress and ductile resistance of asphalt binders. Construction and Building Materials 238, pages 117746.
Crossref
Crossref
Hassan Ziari, M.R.M. Aliha, Ali Moniri & Yasha Saghafi. (2020) Crack resistance of hot mix asphalt containing different percentages of reclaimed asphalt pavement and glass fiber. Construction and Building Materials 230, pages 117015.
Crossref
Crossref
Khelifa Harichane, Mohamed Ghrici & Hamid Gadouri. (2019) Natural pozzolana used as a source of silica for improving the behaviour of lime–stabilised clayey soil. Arabian Journal of Geosciences 12:15.
Crossref
Crossref
Hasan Ziari & Ali Moniri. (2019) Laboratory evaluation of the effect of synthetic Polyolefin-glass fibers on performance properties of hot mix asphalt. Construction and Building Materials 213, pages 459-468.
Crossref
Crossref
H.R. Fattahi Amirdehi, M.R.M. Aliha, Ali Moniri & A.R. Torabi. (2019) Using the generalized maximum tangential stress criterion to predict mode II fracture of hot mix asphalt in terms of mode I results – A statistical analysis. Construction and Building Materials 213, pages 483-491.
Crossref
Crossref
Ali Mansourkhaki & Amir Aghasi. (2019) Performance of rubberized asphalt containing liquid nanomaterial anti-strip agent. Construction and Building Materials 214, pages 468-474.
Crossref
Crossref
Mostafa Nakhaei, Koorosh Naderi, Aliasghar Akbari Nasrekani & David H. Timm. (2018) Moisture resistance study on PE-wax and EBS-wax modified warm mix asphalt using chemical and mechanical procedures. Construction and Building Materials 189, pages 882-889.
Crossref
Crossref
Asghar Habibnejad Korayem, Hasan Ziari, Mojtaba Hajiloo & Ali Moniri. (2018) Rutting and fatigue performance of asphalt mixtures containing amorphous carbon as filler and binder modifier. Construction and Building Materials 188, pages 905-914.
Crossref
Crossref
Mohammadreza Sabouri, Danial Mirzaiyan & Ali Moniri. (2018) Effectiveness of Linear Amplitude Sweep (LAS) asphalt binder test in predicting asphalt mixtures fatigue performance. Construction and Building Materials 171, pages 281-290.
Crossref
Crossref