Citations (23)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (4)
Anish Nair, Somasundaram Kumanan, Chander Prakash, Dhanesh G. Mohan, Kuldeep Kumar Saxena, Sandeep Kumar & Gaurav Kumar. (2023) Research developments and technological advancements in conventional and non-conventional machining of superalloys – a review. Journal of Adhesion Science and Technology 37:22, pages 3053-3124.
Read now
Read now
Kore Mahesh, Jibin T Philip, S N Joshi & Basil Kuriachen. (2021) Machinability of Inconel 718: A critical review on the impact of cutting temperatures. Materials and Manufacturing Processes 36:7, pages 753-791.
Read now
Read now
Halil Çalişkan, Peter Panjan & Srecko Paskvale. (2014) Monitoring of Wear Characteristics of TiN and TiAlN Coatings at Long Sliding Distances. Tribology Transactions 57:3, pages 496-502.
Read now
Read now
X H Han & L Hua. (2013) Effect of process parameters on wear in cold rotary forging by using 3D FE numerical simulation. Ironmaking & Steelmaking 40:1, pages 50-60.
Read now
Read now
Articles from other publishers (19)
Henry Boyle, Susanne Norgren, Pete Crawforth, Katerina Christofidou, Denis Boing & Martin Jackson. (2023) Insights in α-Al2O3 degradation in multilayer CVD coated carbide tools when turning IN718. Wear 523, pages 204786.
Crossref
Crossref
Chi Hsin Liu, Tatsuya Sugihara & Toshiyuki Enomoto. (2022) Interrupted cutting of Inconel 718 with AlTiSiN coated cemented carbide tool under high pressure coolant supply. Precision Engineering 78, pages 124-133.
Crossref
Crossref
Çagrı Vakkas Yıldırım, Turgay Kıvak & Fehmi Erzincanlı. (2019) Influence of Different Cooling Methods on Tool Life, Wear Mechanisms and Surface Roughness in the Milling of Nickel-Based Waspaloy with WC Tools. Arabian Journal for Science and Engineering 44:9, pages 7979-7995.
Crossref
Crossref
Daniel Finkeldei, Marcus Sexauer & Friedrich Bleicher. (2019) End milling of Inconel 718 using solid Si3N4 ceramic cutting tools. Procedia CIRP 81, pages 1131-1135.
Crossref
Crossref
Ramesh Rajguru & Hari Vasudevan. 2019. Proceedings of International Conference on Intelligent Manufacturing and Automation. Proceedings of International Conference on Intelligent Manufacturing and Automation
425
432
.
Isha Srivastava & Ajay Batish. (2017) Performance Evaluation of PVD and CVD Coated Inserts during End Milling with DRY and MQL Condition. Applied Mechanics and Materials 867, pages 165-170.
Crossref
Crossref
A. Thakur & S. Gangopadhyay. (2016) Influence of tribological properties on the performance of uncoated, CVD and PVD coated tools in machining of Incoloy 825. Tribology International 102, pages 198-212.
Crossref
Crossref
Xianjun Kong, Hongzhi Zhang, Lijun Yang, Guanxin Chi & Yang Wang. (2015) Carbide tool wear mechanisms in laser-assisted machining of metal matrix composites. The International Journal of Advanced Manufacturing Technology 85:1-4, pages 365-379.
Crossref
Crossref
Nik Masmiati NikPa, Ahmed Aly Diaa Sarhan, Mohsen Abdelnaeim Hassan & Mohd Hamdi Abd Shukor. (2015)
Novel uses of SiO
2
nanolubrication in end milling of medium carbon steel for higher compressive residual stress measured by high-energy X-ray diffraction data
. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 230:6, pages 697-708.
Crossref
Crossref
Xianjun Kong, Lijun Yang, Hongzhi Zhang, Kai Zhou & Yang Wang. (2014) Cutting performance and coated tool wear mechanisms in laser-assisted milling K24 nickel-based superalloy. The International Journal of Advanced Manufacturing Technology 77:9-12, pages 2151-2163.
Crossref
Crossref
B. Pazhanivel, T. Prem Kumar & G. Sozhan. (2015) Machinability and scratch wear resistance of carbon-coated WC inserts. Materials Science and Engineering: B 193, pages 146-152.
Crossref
Crossref
Turgay Kıvak. (2014) Optimization of surface roughness and flank wear using the Taguchi method in milling of Hadfield steel with PVD and CVD coated inserts. Measurement 50, pages 19-28.
Crossref
Crossref
Shao-hsien Chen, Sen-chieh Su & Wern-dare Jehng. (2014) Characterization of shear stresses in nickel-based superalloy Mar-M247 when orthogonal machining with coated carbide tools. Journal of Central South University 21:3, pages 862-869.
Crossref
Crossref
R Thirumalai, JS Senthilkumaar, P Selvarani & S Ramesh. (2012) Machining characteristics of Inconel 718 under several cutting conditions based on Taguchi method. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 227:9, pages 1889-1897.
Crossref
Crossref
R. Thirumalai & J. S. Senthilkumaar. (2013) Multi-criteria decision making in the selection of machining parameters for Inconel 718. Journal of Mechanical Science and Technology 27:4, pages 1109-1116.
Crossref
Crossref
G. Ranga Janardhana & D. Hanumantha Rao. (2011) Multi-Response Optimization Of High Speed Turning Parameters Of Superalloy Inconel 718 Material Using Taguchi Method Based Grey Relational Analysis. i-manager's Journal on Mechanical Engineering 1:3, pages 49-60.
Crossref
Crossref
Chao Xue & Wuyi Chen. (2011) Adhering layer formation and its effect on the wear of coated carbide tools during turning of a nickel-based alloy. Wear 270:11-12, pages 895-902.
Crossref
Crossref
Abhay Bhatt, Helmi Attia, R. Vargas & V. Thomson. (2010) Wear mechanisms of WC coated and uncoated tools in finish turning of Inconel 718. Tribology International 43:5-6, pages 1113-1121.
Crossref
Crossref
Y.S. Liao, H.M. Lin & J.H. Wang. (2008) Behaviors of end milling Inconel 718 superalloy by cemented carbide tools. Journal of Materials Processing Technology 201:1-3, pages 460-465.
Crossref
Crossref