Advanced search
Publication Cover
Tribology Transactions Volume 44, 2001 - Issue 3
Submit an article Journal homepage
1,199
Views
175
CrossRef citations to date
0
Altmetric
Original Articles

A Computer Program Package for the Prediction of EHL and Mixed Lubrication Characteristics, Friction, Subsurface Stresses and Flash Temperatures Based on Measured 3-D Surface Roughness

Dong Zhu Eaton Corporation, Innovation Center, Southfield, Michigan, 48037
&
Yuan-Zhong Hu Tsinghua University, State Key Laboratory of Tribology, Beijing, 100084, China
Pages 383-390 | Published online: 25 Mar 2008

Citations (175)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (14)

Venkata Harish Babu Manne, Andrea Vacca & Kushagra Singh. (2023) A Curve-fit Traction Coefficient Relation of Mixed EHL Line Contact with Hydraulic Fluid and Steel Surfaces. Tribology Transactions 66:2, pages 364-380.
Read now
Michael J. Handschuh, Sheng Li, Ahmet Kahraman & David Talbot. (2020) An Experimental–Theoretical Methodology to Develop Scuffing Limits for Relatively Smooth High-Speed Contacts. Tribology Transactions 63:5, pages 781-795.
Read now
Alexis Bonetto, Daniel Nélias, Thibaut Chaise & Laurent Zamponi. (2019) A Coupled Euler-Lagrange Model for More Realistic Simulation of Debris Denting in Rolling Element Bearings. Tribology Transactions 62:5, pages 760-778.
Read now
Yibin Guo, Xiqun Lu, Wanyou Li & Tao He. (2013) Interfacial Stress and Failure Analysis for Piston Ring Coatings under Dry Running Condition. Tribology Transactions 56:6, pages 1027-1034.
Read now
Jiman Han & Qian Zou. (2013) Evolution of Contact Characteristics during a Scuffing Process. Tribology Transactions 56:1, pages 58-64.
Read now
H.P. EVANS, A. CLARKE, K.J. SHARIF & R.W. SNIDLE. (2010) The Role of Heat Partition in Elastohydrodynamic Lubrication. Tribology Transactions 53:2, pages 179-188.
Read now
Q. Jane Wang, Dong Zhu, Raosheng Zhou & Fukuo Hashimoto. (2008) Investigating the Effect of Surface Finish on Mixed EHL in Rolling and Rolling-Sliding Contacts. Tribology Transactions 51:6, pages 748-761.
Read now
NOBUYOSHI OHNO (Member, STLE)MD. ZIAUR RAHMAN (Member, STLE)KOUICHI KAKUDA. (2005) Bulk Modulus of Lubricating Oils as Predominant Factor Affecting Tractional Behavior in High-Pressure Elastohydrodynamic Contacts. Tribology Transactions 48:2, pages 165-170.
Read now
LAURENTIU MORARU, THEOG. KEITH & AHMET KAHRAMAN. (2004) Aspects Regarding the Use of Probabilistic Models for Isothermal Full Film Rough Line Contacts. Tribology Transactions 47:3, pages 386-395.
Read now
Dong Zhu. (2003) Elastohydrodynamic Lubrication in Extended Parameter Ranges — Part III: Ellipticity Effect. Tribology Transactions 46:4, pages 585-591.
Read now
Dmitry Epstein, LeonM. Keer, Q. Jane Wang, H.S. Cheng & Dong Zhu. (2003) Effect of Surface Topography on Contact Fatigue in Mixed Lubrication. Tribology Transactions 46:4, pages 506-513.
Read now
Dong Zhu. (2003) Effect of Surface Roughness on Mixed EHD Lubrication Characteristics. Tribology Transactions 46:1, pages 44-48.
Read now
Dong Zhu. (2002) Elastohydrodynamic Lubrication in Extended Parameter Ranges — Part II: Load Effect. Tribology Transactions 45:4, pages 549-555.
Read now
Dong Zhu. (2002) Elastohydrodynamic Lubrication in Extended Parameter Ranges — Part I: Speed Effect. Tribology Transactions 45:4, pages 540-548.
Read now

Articles from other publishers (161)

Deliang Hua, Renze Li, Xiujiang Shi, Wen Sun, Fangpeng Shi & Xiqun Lu. (2023) Predictions of friction and temperature at marine cam-tappet interface based on mixed lubrication analysis with real surface roughness. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 237:9, pages 1854-1867.
Crossref
Deepak K Prajapati, Dilshad Ahmad, Jitendra K Katiyar, Chander Prakash & Rafic M Ajaj. (2023) A numerical study on the impact of lubricant rheology and surface topography on heavily loaded non-conformal contacts. Surface Topography: Metrology and Properties 11:3, pages 035006.
Crossref
Jun Wen, Yuansheng Zhou, Jinyuan Tang & Yu Dai. (2023) An Effective Analytical Approach to Predicting the Surface Contact Temperature of the Face Gear Drives. Mathematics 11:14, pages 3087.
Crossref
Xingxin Liang, Muyu Han, Tao He, Lijun Cui, Zhiyong Yang & Wu Ouyang. (2023) A Mixed Lubrication Deterministic Model of an Elastic Support Water-Lubricated Tilting Pad Thrust Bearing. Lubricants 11:6, pages 262.
Crossref
Jiaqi Li, Boyang Zhang, Qingdong Zhang & Rui Li. (2023) The influence of surface topography on mixed plasto-elastohydrodynamic lubrication in point contacts. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 237:5, pages 1197-1211.
Crossref
Siyu Wang & Rupeng Zhu. (2023) Evaluating the Time-Varying Mesh Stiffness of Planetary Gear Set With Gear Crack Considering the Friction Force Under Mixed Elastohydrodynamic Lubrication Condition. Journal of Tribology 145:4.
Crossref
Duan Yang, He Liu, Jianfeng Zhong, Xiang Zhu & Yu Dai. (2023) Influence of Nozzle Layouts on the Heat-Flow Coupled Characteristics for Oil-Jet Lubricated Spur Gears. Lubricants 11:1, pages 25.
Crossref
Henara L. Costa, Francisco J. Profito, Xuan Zhang & Karen Ann Thole. (2023) Optimizing the surface of manufactured components for friction, adhesion, and convective heat transfer. MRS Bulletin 47:12, pages 1247-1259.
Crossref
Vasu Kolli, Andreas Winkler, Sandro Wartzack & Max Marian. (2022) Micro-scale deterministic asperity contact FEM simulation. Surface Topography: Metrology and Properties 10:4, pages 044011.
Crossref
Ning Jiang, Shuting Wang, Aodi Yang, Wan Zhou & Jie Zhang. (2022) Transmission Efficiency of Cycloid–Pinion System Considering the Assembly Dimensional Chain. Applied Sciences 12:23, pages 11917.
Crossref
Antonio Carlo Bertolino, Andrea De Martin, Federico Fasiello, Stefano Mauro & Massimo Sorli. (2022) A Simulation Study on the Effect of Lubricant Ageing on Ball Screws Behaviour. A Simulation Study on the Effect of Lubricant Ageing on Ball Screws Behaviour.
R.I. Taylor & I. Sherrington. (2022) A simplified approach to the prediction of mixed and boundary friction. Tribology International 175, pages 107836.
Crossref
Max Marian, Andreas Almqvist, Andreas Rosenkranz & Michel Fillon. (2022) Numerical micro-texture optimization for lubricated contacts—A critical discussion. Friction 10:11, pages 1772-1809.
Crossref
Fengxia Lu, Xuechen Cao, Heyun Bao & Rupeng Zhu. (2022) Nonlinear tribo-dynamic model of helicopter mid-reducer system under light loss of lubrication. Journal of Mechanical Science and Technology 36:11, pages 5327-5339.
Crossref
Sheng Li, Ali Kolivand & Jing Wei. (2022) Determination of Critical Temperature of Scuffing for AISI 8620 Steel Gear Contacts Lubricated by Dexron 6 Through Computational Simulation of Experiment. Journal of Tribology 144:8.
Crossref
Javier Echávarri Otero, Eduardo de la Guerra Ochoa, Enrique Chacón Tanarro, Francisco Franco Martínez & Rafael Wilmer Contreras Urgiles. (2022) An Analytical Approach for Predicting EHL Friction: Usefulness and Limitations. Lubricants 10:7, pages 141.
Crossref
Siyu Wang & Rupeng Zhu. (2022) Vibration-Based Fault Diagnosis of Helical Gear Pair With Tooth Surface Wear Considering Time-Varying Friction Coefficient Under Mixed Elastohydrodynamic Lubrication Condition. Journal of Tribology 144:7.
Crossref
Jiang Zhao, Wei Sheng, Zhengminqing Li, Hong Zhang & Rupeng Zhu. (2022) Study on the Lubrication Characteristics of Spur Gear Pairs With Low Sliding Ratio Under Mixed Elastohydrodynamic Lubrication. Journal of Tribology 144:7.
Crossref
Li-Ming Chu, Cai-Wan Chang-Jian & Hsiang-Chen Hsu. (2022) The effects of couple stress lubricants and surface roughness on squeeze EHL motion between porous medium layer and elastic ball. Advances in Mechanical Engineering 14:6, pages 168781322210998.
Crossref
Jeng-Haur Horng, Chia-Chun Yu & Yang-Yuan Chen. (2022) Tribological Characteristics and Load-Sharing of Point-Contact Interface in Three-Body Mixed Lubrication. Journal of Tribology 144:5.
Crossref
Chan Xu, Bo Li & Tonghai Wu. (2021) Wear characterization under sliding–rolling contact using friction-induced vibration features. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 236:4, pages 634-647.
Crossref
Jingyue Wang, Ning Liu, Haotian Wang & Lixin Guo. (2022) Research on bifurcation and chaos characteristics of planet gear transmission system with mixed elastohydrodynamic lubrication (EHL) friction. International Journal of Nonlinear Sciences and Numerical Simulation 23:1, pages 1-14.
Crossref
Wei Cao, Tao He, Wei Pu & Ke Xiao. (2021) Dynamics of lubricated spiral bevel gears under different contact paths. Friction 10:2, pages 247-267.
Crossref
Romain Quiban, Nicolas Grenet De Bechillon, Thomas Touret, Pierre Navet, Yasser Diab, Jérôme Cavoret, Fabrice Ville & Christophe Changenet. (2021) On the interest of a semi-empirical model for the tooth friction coefficient in gear transmissions. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 235:12, pages 2654-2663.
Crossref
Shuowen Zhang & Chenhui Zhang. (2021) A New Deterministic Model for Mixed Lubricated Point Contact With High Accuracy. Journal of Tribology 143:10.
Crossref
M F Al-Mayali, Ali Albattat, Hassneen AL – Asadi & K J Sharif. (2021) Assessment of Multiaxial Fatigue Damage Criteria Based on the Critical Plane Concept in Micro-EHL Line Contact.. Journal of Physics: Conference Series 1973:1, pages 012159.
Crossref
Antonio Carlo Bertolino, Giovanni Jacazio, Stefano Mauro & Massimo Sorli. (2021) Investigation on the ball screws no-load drag torque in presence of lubrication through MBD simulations. Mechanism and Machine Theory 161, pages 104328.
Crossref
Jingyue Wang, Ning Liu, Haotian Wang & Lixin Guo. (2020) Nonlinear dynamic characteristics of planetary gear transmission system considering squeeze oil film. Journal of Low Frequency Noise, Vibration and Active Control 40:2, pages 823-851.
Crossref
Jialong Yang, Wei Pu & Xin Pei. (2021) A deterministic tribofilm growth model considering flash temperature and surface roughness in mixed lubrication. Surface Topography: Metrology and Properties 9:2, pages 025017.
Crossref
Xiu-jiang Shi, Xi-qun Lu, Tao He, Wen Sun, Qing-shun Tong, Xuan Ma, Bin Zhao & Dong Zhu. (2021) Predictions of friction and flash temperature in marine gears based on a 3D line contact mixed lubrication model considering measured surface roughness船用齿轮基于三维线接触混合润滑模型摩擦以及闪温预测. Journal of Central South University 28:5, pages 1570-1583.
Crossref
Siyu Wang & Rupeng Zhu. (2021) An improved mesh stiffness model for double-helical gear pair with spalling defects considering time-varying friction coefficient under mixed EHL. Engineering Failure Analysis 121, pages 105174.
Crossref
George Tumanishvili, Tengiz Nadiradze & Giorgi Tumanishvili. 2021. Tribology in Materials and Manufacturing - Wear, Friction and Lubrication. Tribology in Materials and Manufacturing - Wear, Friction and Lubrication.
Xingbao Huang, Bintang Yang & Youqiang Wang. (2020) Influences of transient impact and vibration on the lubrication performance of spur gears. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 235:2, pages 274-289.
Crossref
Sheng Li & Ahmet Kahraman. (2021) A scuffing model for spur gear contacts. Mechanism and Machine Theory 156, pages 104161.
Crossref
Changjiang Zhou, Mingcai Xing, Bo Hu & Zhaoyao Shi. (2020) A Modified Wear Model Considering Contact Temperature for Spur Gears in Mixed Elastohydrodynamic Lubrication. Tribology Letters 68:4.
Crossref
Siyu Wang & Rupeng Zhu. (2020) An improved mesh stiffness calculation model of spur gear pair under mixed EHL friction with spalling effect. Vibroengineering PROCEDIA 33, pages 176-181.
Crossref
Patricia M. Johns-Rahnejat, Nader Dolatabadi & Homer Rahnejat. (2020) Analytical Elastostatic Contact Mechanics of Highly-Loaded Contacts of Varying Conformity. Lubricants 8:9, pages 89.
Crossref
Heli Wang, Haifeng Huang, Sibo Yu & Weijie Gu. (2020) The Effect of Surface Morphology of Tapered Rolling Bearings in High-Speed Train on Grease Lubrication. Lubricants 8:7, pages 76.
Crossref
Xiujiang Shi, Jiqiang Wu, Bin Zhao, Xuan Ma & Xiqun Lu. (2020) Mixed thermal elastohydrodynamic lubrication analysis with dynamic performance of aero ball bearing during start-up and shut-down. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 234:6, pages 873-886.
Crossref
Wei Pu, Qin Zhang, Wang Zhang, Si Ren, Zhe Chen & Tian Tian. (2020) Flash temperature and anti-wear tribofilm growth mechanisms by asperity contact in top-ring/liner conjunction of IC engines. Tribology International 146, pages 106186.
Crossref
Si Ren, Ying Zhang, Jialong Yang, Zongzheng Wang, Ling Dai & Wei Pu. (2020) Lubrication mechanisms of rubbing interface in internal meshing teeth with small clearance. Lubrication Science 32:4, pages 169-182.
Crossref
Andreas Winkler, Max Marian, Stephan Tremmel & Sandro Wartzack. (2020) Numerical Modeling of Wear in a Thrust Roller Bearing under Mixed Elastohydrodynamic Lubrication. Lubricants 8:5, pages 58.
Crossref
Hui Cao, Zulfiqar Khan & Yonggang Meng. (2020) Comparison of rolling contact fatigue life between elastohydrodynamic lubricated point contacts pre and post running-in treatment. Tribology International 144, pages 106089.
Crossref
Tao He, Zhanjiang Wang & Jiqiang Wu. (2020) Effect of imperfect coating on the elastohydrodynamic lubrication: Dislocation-like and force-like coating-substrate interfaces. Tribology International 143, pages 106098.
Crossref
Florian König, Andreas Rosenkranz, Philipp G. Grützmacher, Frank Mücklich & Georg Jacobs. (2020) Effect of single- and multi-scale surface patterns on the frictional performance of journal bearings – A numerical study. Tribology International 143, pages 106041.
Crossref
Heli Liu, Huaiju Liu, Caichao Zhu & Robert G. Parker. (2020) Effects of lubrication on gear performance: A review. Mechanism and Machine Theory 145, pages 103701.
Crossref
Xin Pei, Wei Pu, Jialong Yang & Ying Zhang. (2020) Friction and adhesive wear behavior caused by periodic impact in mixed-lubricated point contacts. Advances in Mechanical Engineering 12:2, pages 168781402090166.
Crossref
Zhongliang Xie & Huanling Liu. (2020) Experimental research on the interface lubrication regimes transition of water lubricated bearing. Mechanical Systems and Signal Processing 136, pages 106522.
Crossref
Chunxing Gu, Xianghui Meng, Shuwen Wang & Xiaohong Ding. (2019) Research on Mixed Lubrication Problems of the Non-Gaussian Rough Textured Surface With the Influence of Stochastic Roughness in Consideration. Journal of Tribology 141:12.
Crossref
Philipp G. Grützmacher, Francisco J. Profito & Andreas Rosenkranz. (2019) Multi-Scale Surface Texturing in Tribology—Current Knowledge and Future Perspectives. Lubricants 7:11, pages 95.
Crossref
Xin Pei, Wei Pu, Ying Zhang & Lu Huang. (2019) Surface topography and friction coefficient evolution during sliding wear in a mixed lubricated rolling-sliding contact. Tribology International 137, pages 303-312.
Crossref
S. Li & D. Masse. (2019) On the flash temperature under the starved lubrication condition of a line contact. Tribology International 136, pages 173-181.
Crossref
Andreas Rosenkranz, Philipp G. Grützmacher, Carsten Gachot & Henara L. Costa. (2019) Surface Texturing in Machine Elements − A Critical Discussion for Rolling and Sliding Contacts. Advanced Engineering Materials 21:8, pages 1900194.
Crossref
Xingbao Huang, Changjiang Zhou, Xianjiu Lu & Youqiang Wang. (2019) The mixed regime and wear mechanism of elliptical contact in the start-up process considering interface material properties: A theoretical prediction. International Journal of Mechanical Sciences 157-158, pages 60-74.
Crossref
G. Li, Z. H. Wang & W. D. Zhu. (2019) Prediction of Surface Wear of Involute Gears Based on a Modified Fractal Method. Journal of Tribology 141:3.
Crossref
Shivam S. Alakhramsing, Matthijn B. de Rooij, Aydar Akchurin, Dirk J. Schipper & Mark van Drogen. (2019) A Mixed-TEHL Analysis of Cam-Roller Contacts Considering Roller Slip: On the Influence of Roller-Pin Contact Friction. Journal of Tribology 141:1.
Crossref
Xiao-Liang Yan, Yu-Yan Zhang, Guo-Xin Xie, Xiao-Qiong Du & Fen Qin. (2019) Effects of Texture Orientation on the Mixed Thermal Elastohydrodynamic Lubrication and Fatigue Life in Point Contacts. Journal of Tribology 141:1.
Crossref
Lai Gan, Ke Xiao, Jiaxu Wang, Wei Pu & Wei Cao. (2019) A numerical method to investigate the temperature behavior of spiral bevel gears under mixed lubrication condition. Applied Thermal Engineering 147, pages 866-875.
Crossref
Shaoshuai Hou, Jing Wei, Aiqiang Zhang, Teik C. Lim & Chunpeng Zhang. (2018) Study of Dynamic Model of Helical/Herringbone Planetary Gear System With Friction Excitation. Journal of Computational and Nonlinear Dynamics 13:12.
Crossref
Yazhao Zhang, Alexander Kovalev, Noriyuki Hayashi, Kensuke Nishiura & Yonggang Meng. (2018) Numerical Prediction of Surface Wear and Roughness Parameters During Running-In for Line Contacts Under Mixed Lubrication. Journal of Tribology 140:6.
Crossref
A.A. Lubrecht, N. Biboulet & C.H. Venner. (2018) Boundary layers: Unifying the impact and rolling EHL point contacts. Tribology International 126, pages 186-191.
Crossref
Ling Dai, Wei Pu & Jiaxu Wang. (2018) Mixed EHL analysis of planetary drives with small teeth number difference considering real tooth geometry. Lubrication Science 30:6, pages 317-330.
Crossref
A.I. Vakis, V.A. Yastrebov, J. Scheibert, L. Nicola, D. Dini, C. Minfray, A. Almqvist, M. Paggi, S. Lee, G. Limbert, J.F. Molinari, G. Anciaux, R. Aghababaei, S. Echeverri Restrepo, A. Papangelo, A. Cammarata, P. Nicolini, C. Putignano, G. Carbone, S. Stupkiewicz, J. Lengiewicz, G. Costagliola, F. Bosia, R. Guarino, N.M. Pugno, M.H. Müser & M. Ciavarella. (2018) Modeling and simulation in tribology across scales: An overview. Tribology International 125, pages 169-199.
Crossref
Bharati M Shettar, P S Hiremath & N M Bujurke. (2018) A novel numerical scheme for the analysis of effects of surface roughness on EHL line contact with couple stress fluid as lubricant. Sādhanā 43:8.
Crossref
Xiqun Lu, Qingbing Dong, Kun Zhou, Bin Zhao & Bo Zhao. (2018) Numerical Analysis of Transient Elastohydrodynamic Lubrication During Startup and Shutdown Processes. Journal of Tribology 140:4.
Crossref
Hans-Jürgen Butt & Michael Kappl. 2018. Surface and Interfacial Forces 2e. Surface and Interfacial Forces 2e 381 429 .
Zhijian Wang, Qingtao Yu, Xuejin Shen & Xiaoyang Chen. (2018) A Simple Model for Scuffing Risk Evaluation of Point Contact Under Mixed Lubrication. Journal of Tribology 140:3.
Crossref
Wang Yunlong, Wang Wenzhong, Zhang Shengguang & Zhao Ziqiang. (2018) Effects of raceway surface roughness in an angular contact ball bearing. Mechanism and Machine Theory 121, pages 198-212.
Crossref
S. Fricke, C. Hager, S. Solovyev, M. Wangenheim & J. Wallaschek. (2018) Influence of surface form deviations on friction in mixed lubrication. Tribology International 118, pages 491-499.
Crossref
Zhenhua Zhang, Jiaxu Wang, Guangwu Zhou & Xin Pei. (2018) Analysis of mixed lubrication of RV reducer turning arm roller bearing. Industrial Lubrication and Tribology 70:1, pages 161-171.
Crossref
Van-Canh Tong & Seong-Wook Hong. (2018) Improved formulation for running torque in angular contact ball bearings. International Journal of Precision Engineering and Manufacturing 19:1, pages 47-56.
Crossref
A. Diez-Ibarbia, A. Fernandez-Del-Rincon, P. Garcia, A. De-Juan, M. Iglesias & F. Viadero. (2017) Assessment of load dependent friction coefficients and their influence on spur gears efficiency. Meccanica 53:1-2, pages 425-445.
Crossref
Jacob Sukumaran, Patrick De Baets & Dieter Fauconnier. 2017. Friction, Lubrication, and Wear Technology. Friction, Lubrication, and Wear Technology 67 80 .
C.H. HagerJr.Jr., W.M. Hannon & V.M. Bedekar. 2017. Friction, Lubrication, and Wear Technology. Friction, Lubrication, and Wear Technology 442 453 .
Xiaogang Zhang, Sangarapillai Kanapathipillai, Tonghai Wu & Zhongxiao Peng. (2017) Frictional behaviour and friction mechanisms of rolling-sliding contact in mixed EHL. Tribology International 114, pages 201-207.
Crossref
Jian-ge Zhang, Shao-jun Liu & Te Fang. (2017) Determination of surface temperature rise with the coupled thermo-elasto-hydrodynamic analysis of spiral bevel gears. Applied Thermal Engineering 124, pages 494-503.
Crossref
Javier Echávarri Otero, Eduardo de la Guerra Ochoa, Enrique Chacón Tanarro & Benito del Río López. (2017) Friction coefficient in mixed lubrication: A simplified analytical approach for highly loaded non-conformal contacts. Advances in Mechanical Engineering 9:7, pages 168781401770626.
Crossref
Aydar Akchurin, Rob Bosman & Piet M. Lugt. (2017) Generation of wear particles and running-in in mixed lubricated sliding contacts. Tribology International 110, pages 201-208.
Crossref
Xianghui Meng, Chunxing Gu & Youbai Xie. (2016) Elasto-plastic contact of rough surfaces: a mixed-lubrication model for the textured surface analysis. Meccanica 52:7, pages 1541-1559.
Crossref
Tao He, Dong Zhu, Jiaxu Wang & Q. Jane Wang. (2017) Experimental and Numerical Investigations of the Stribeck Curves for Lubricated Counterformal Contacts. Journal of Tribology 139:2.
Crossref
Xiaogang Zhang, Zhixiong Li & Jianmei Wang. (2017) Friction prediction of rolling-sliding contact in mixed EHL. Measurement 100, pages 262-269.
Crossref
Zhiheng Feng & Chaosheng Song. (2017) Effects of Geometry Design Parameters on the Static Strength and Dynamics for Spiral Bevel Gear. International Journal of Rotating Machinery 2017, pages 1-8.
Crossref
F. E. Kennedy & X. Tian. (2016) Modeling Sliding Contact Temperatures, Including Effects of Surface Roughness and Convection. Journal of Tribology 138:4.
Crossref
Wei Pu, Dong Zhu, Jiaxu Wang & Q. Jane Wang. (2016) Rolling–sliding contact fatigue of surfaces with sinusoidal roughness. International Journal of Fatigue 90, pages 57-68.
Crossref
Javier Echávarri Otero, Eduardo Guerra Ochoa, Enrique Chacón Tanarro, Andrés Díaz Lantada & Juan M. Munoz‐Guijosa. (2015) Analytical model for predicting friction in line contacts. Lubrication Science 28:4, pages 189-205.
Crossref
Qingbing Dong, Jing Yang, Xu Wang, Leon M Keer & Kun Zhou. (2015) Heterogeneous structures with inhomogeneous inclusions under elastohydrodynamic lubrication contact with consideration of surface roughness. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 230:5, pages 571-582.
Crossref
Zhongliang Xie, Zhu-shi Rao, Na Ta & Ling Liu. (2016) Investigations on transitions of lubrication states for water lubricated bearing. Part I: determination of friction coefficients and film thickness ratios. Industrial Lubrication and Tribology 68:3, pages 404-415.
Crossref
Harish Hirani. 2016. Fundamentals of Engineering Tribology with Applications. Fundamentals of Engineering Tribology with Applications 326 370 .
Daniel Gropper, Ling Wang & Terry J. Harvey. (2016) Hydrodynamic lubrication of textured surfaces: A review of modeling techniques and key findings. Tribology International 94, pages 509-529.
Crossref
M. Andersson, M. Sosa & U. Olofsson. (2016) The effect of running-in on the efficiency of superfinished gears. Tribology International 93, pages 71-77.
Crossref
M. Masjedi & M.M. Khonsari. (2015) An engineering approach for rapid evaluation of traction coefficient and wear in mixed EHL. Tribology International 92, pages 184-190.
Crossref
Aydar Akchurin, Rob Bosman, Piet M. Lugt & Mark van Drogen. (2015) On a Model for the Prediction of the Friction Coefficient in Mixed Lubrication Based on a Load-Sharing Concept with Measured Surface Roughness. Tribology Letters 59:1.
Crossref
Dong Zhu, Jiaxu Wang & Q. Jane Wang. (2015) On the Stribeck Curves for Lubricated Counterformal Contacts of Rough Surfaces. Journal of Tribology 137:2.
Crossref
He Liang, Dan Guo, Tom Reddyhoff, Hugh Spikes & JianBin Luo. (2014) Influence of thermal effects on elastohydrodynamic (EHD) lubrication behavior at high speeds. Science China Technological Sciences 58:3, pages 551-558.
Crossref
M. Masjedi & M.M. Khonsari. (2015) On the effect of surface roughness in point-contact EHL: Formulas for film thickness and asperity load. Tribology International 82, pages 228-244.
Crossref
Wang Wenzhong, Shen Dian, Zhang Shengguang & Zhao Ziqiang. (2015) Investigation of Patterned Textures in Ball-on-Disk Lubricated Point Contacts. Journal of Tribology 137:1.
Crossref
Qingbing Dong & Kun Zhou. (2014) Elastohydrodynamic lubrication modeling for materials with multiple cracks. Acta Mechanica 225:12, pages 3395-3408.
Crossref
Ali Beheshti & M. M. Khonsari. (2014) On the Contact of Curved Rough Surfaces: Contact Behavior and Predictive Formulas. Journal of Applied Mechanics 81:11.
Crossref
Zhang Shengguang, Wang Wenzhong & Zhao Ziqiang. (2014) Elastohydrodynamic Lubrication Analysis of Point Contacts With Consideration of Material Inhomogeneity. Journal of Tribology 136:4.
Crossref
Dong Xu, Jie Zhang, Hongbo Li, Jinsong Lu, Leichuan Wang & Zehong Lei. (2014) Effect of surface spacing parameters on mixed lubrication condition. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 228:5, pages 577-583.
Crossref
Lei Wang, Wenzhong Wang, Hui Wang, Tianbao Ma & Yuanzhong Hu. (2014) Numerical Analysis on the Factors Affecting the Hydrodynamic Performance for the Parallel Surfaces With Microtextures. Journal of Tribology 136:2.
Crossref
Mihaela Rodica D. Bălan, Vasile Ciprian Stamate, Luc Houpert & Dumitru N. Olaru. (2014) The influence of the lubricant viscosity on the rolling friction torque. Tribology International 72, pages 1-12.
Crossref
Zou Yujing & Chang Degong. (2013) Prediction of meshing efficiency in spur gear under mixed EHL conditions and research on the influence of design parameters. Prediction of meshing efficiency in spur gear under mixed EHL conditions and research on the influence of design parameters.
S. Li. (2013) Influence of Surface Roughness Lay Directionality on Scuffing Failure of Lubricated Point Contacts. Journal of Tribology 135:4.
Crossref
Xiao-Liang Yan, Xiao-Li Wang & Yu-Yan Zhang. (2013) A Parametric Study on Fatigue Life for Mixed Elastohydrodynamic Lubrication Point Contacts. Journal of Tribology 135:4.
Crossref
Dong Zhu & Q. Jane Wang. (2013) Effect of Roughness Orientation on the Elastohydrodynamic Lubrication Film Thickness. Journal of Tribology 135:3.
Crossref
Wen-zhong Wang, Zhixiang Huang, Dian Shen, Lingjia Kong & Shanshan Li. (2013) The Effect of Triangle-Shaped Surface Textures on the Performance of the Lubricated Point-Contacts. Journal of Tribology 135:2.
Crossref
S. Li, A. Kahraman, N. Anderson & L.D. Wedeven. (2013) A model to predict scuffing failures of a ball-on-disk contact. Tribology International 60, pages 233-245.
Crossref
Dong Zhu & Q Jane Wang. (2012) On the λ ratio range of mixed lubrication . Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 226:12, pages 1010-1022.
Crossref
Wen-Zhong Wang, Shanshan Li, Dian Shen, Shengguang Zhang & Yuan-Zhong Hu. (2012) A mixed lubrication model with consideration of starvation and interasperity cavitations. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 226:12, pages 1023-1038.
Crossref
Q. Wang, Simon C. Tung, Y. Liu, Y. Zhang & D. Zhu. 2012. Automotive Lubricants and Testing. Automotive Lubricants and Testing 85 104 .
Xiu Mei Qi, Chuang Kuan Gao & Zeng Qiang Zhang. (2012) Effect of Lubricant Viscosity on Gearing Contact Fatigue Life. Applied Mechanics and Materials 190-191, pages 1295-1301.
Crossref
Dong ZhuJiaxu WangNing Ren & Q. Jane Wang. (2012) Mixed Elastohydrodynamic Lubrication in Finite Roller Contacts Involving Realistic Geometry and Surface Roughness. Journal of Tribology 134:1.
Crossref
J. Wang, C.H. Venner & A.A. Lubrecht. (2011) Amplitude reduction in EHL line contacts under rolling sliding conditions. Tribology International 44:12, pages 1997-2001.
Crossref
Zhiheng Feng, Shilong Wang, Teik C. Lim & Tao Peng. (2011) Enhanced friction model for high-speed right-angle gear dynamics. Journal of Mechanical Science and Technology 25:11, pages 2741-2753.
Crossref
P Isaksson, D Nilsson, R Larsson & A Almqvist. (2011) The influence of surface roughness on friction in a flexible hybrid bearing. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 225:10, pages 975-985.
Crossref
Ning Ren, Dong Zhu & Q. Jane Wang. (2011) Three-Dimensional Plasto-Elastohydrodynamic Lubrication (PEHL) for Surfaces with Irregularities. Journal of Tribology 133:3.
Crossref
W-Z Wang, Y-Z Hu, Y-C Liu & D Zhu. (2010) Solution agreement between dry contacts and lubrication system at ultra-low speed. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 224:10, pages 1049-1060.
Crossref
D Zhu, T Nanbu, N Ren, Y Yasuda & Q J Wang. (2010) Model-based virtual surface texturing for concentrated conformal-contact lubrication. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 224:8, pages 685-696.
Crossref
Dong Zhu, Ning Ren & Q. Jane Wang. (2009) Pitting Life Prediction Based on a 3D Line Contact Mixed EHL Analysis and Subsurface von Mises Stress Calculation. Journal of Tribology 131:4.
Crossref
H.P. Evans, R.W. Snidle & K.J. Sharif. (2009) Deterministic mixed lubrication modelling using roughness measurements in gear applications. Tribology International 42:10, pages 1406-1417.
Crossref
E. Ciulli. (2008) Non-steady state non-conformal contacts: friction and film thickness studies. Meccanica 44:4, pages 409-425.
Crossref
W-Z Wang, F-C Wang, Z-M Jin, D Dowson & Y-Z Hu. (2009) Numerical lubrication simulation of metal-on-metal artificial hip joint replacements: Ball-in-socket model and ball-on-plane model. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 223:7, pages 1073-1082.
Crossref
Laurentiu Moraru & Theo. G KeithJr.Jr.. (2009) Application of the Amplitude Reduction Technique Within Probabilistic Rough EHL Models. Journal of Tribology 131:2.
Crossref
Y-Z Hu. (2009) Tribology research in China: A personal view. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 223:1, pages 1-15.
Crossref
H. P. Evans, K. J. Sharif, A. Clarke & R. W. Snidle. 2010. Advanced Tribology. Advanced Tribology 48 49 .
J. Castro & J. Seabra. (2008) Global and local analysis of gear scuffing tests using a mixed film lubrication model. Tribology International 41:4, pages 244-255.
Crossref
W-Z Wang, Z M Jin, D Dowson & Y Z Hu. (2008) A study of the effect of model geometry and lubricant rheology upon the elastohydrodynamic lubrication performance of metal-on-metal hip joints. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 222:3, pages 493-501.
Crossref
H Qiao, H P Evans & R W Snidle. (2008) Comparison of fatigue model results for rough surface elastohydrodynamic lubrication. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 222:3, pages 381-393.
Crossref
Toshikazu Nanbu, Ning Ren, Yoshiteru Yasuda, Dong Zhu & Q. Jane Wang. (2008) Micro-Textures in Concentrated Conformal-Contact Lubrication: Effects of Texture Bottom Shape and Surface Relative Motion. Tribology Letters 29:3, pages 241-252.
Crossref
Toshikazu Nanbu, Yoshiteru Yasuda, Kenshi Ushijima, Jun Watanabe & Dong Zhu. (2007) Increase of Traction Coefficient due to Surface Microtexture. Tribology Letters 29:2, pages 105-118.
Crossref
Neelesh Deolalikar, Farshid Sadeghi & Sean Marble. (2008) Numerical Modeling of Mixed Lubrication and Flash Temperature in EHL Elliptical Contacts. Journal of Tribology 130:1.
Crossref
Ning Ren, Toshikazu Nanbu, Yoshiteru Yasuda, Dong Zhu & Qian Wang. (2007) Micro Textures in Concentrated-Conformal-Contact Lubrication: Effect of Distribution Patterns. Tribology Letters 28:3, pages 275-285.
Crossref
Ashlie Martini, Dong Zhu & Qian Wang. (2007) Friction Reduction in Mixed Lubrication. Tribology Letters 28:2, pages 139-147.
Crossref
Dong Zhu, Ashlie Martini, Wenzhong Wang, Yuanzhong Hu, Bohdan Lisowsky & Q. Jane Wang. (2007) Simulation of Sliding Wear in Mixed Lubrication. Journal of Tribology 129:3, pages 544-552.
Crossref
Wen-zhong Wang, Shun Wang, Fanghui Shi, Yu-cong Wang, Hai-bo Chen, Hui Wang & Yuan-zhong Hu. (2007) Simulations and Measurements of Sliding Friction Between Rough Surfaces in Point Contacts: From EHL to Boundary Lubrication. Journal of Tribology 129:3, pages 495-501.
Crossref
Yi Jia & Guillermo Araya. (2007) Numerical analysis of the design parameters on the performance of thin film temperature sensors. Measurement Science and Technology 18:7, pages 2268-2274.
Crossref
D Zhu. (2007) On some aspects of numerical solutions of thin-film and mixed elastohydrodynamic lubrication. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 221:5, pages 561-579.
Crossref
Wen-zhong Wang, Yuan-zhong Hu, Yu-chuan Liu & Hui Wang. (2007) Deterministic solutions and thermal analysis for mixed lubrication in point contacts. Tribology International 40:4, pages 687-693.
Crossref
J Castro & J Seabra. (2007) Coefficient of friction in mixed film lubrication: Gears versus twin-discs. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 221:3, pages 399-411.
Crossref
A Clarke, K. J. Sharif, H. P. Evans & R. W. Snidle. (2007) Elastohydrodynamic modelling of heat partition in rolling-sliding point contacts. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 221:3, pages 223-235.
Crossref
Yuchuan Liu, Q. Jane Wang, Wenzhong Wang, Yuanzhong Hu & Dong Zhu. (2006) Effects of Differential Scheme and Mesh Density on EHL Film Thickness in Point Contacts. Journal of Tribology 128:3, pages 641-653.
Crossref
W-Z Wang, Y-Z Hu, H Wang & Y-C Liu. (2006) Effect of thermo-elastic deformation on lubricated point contacts. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 220:6, pages 523-534.
Crossref
Y Jia & G Araya. (2006) Dynamic performance of a thin film temperature sensor in a lubricated contact. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 220:6, pages 487-497.
Crossref
Wen-zhong Wang, Hui Chen, Yuan-zhong Hu & Hui Wang. (2006) Effect of surface roughness parameters on mixed lubrication characteristics. Tribology International 39:6, pages 522-527.
Crossref
J.B. Luo & S. Liu. (2006) The investigation of contact ratio in mixed lubrication. Tribology International 39:5, pages 409-416.
Crossref
A. Clarke, K. J. Sharif, H. P. Evans & R. W. Snidle. (2006) Heat Partition in Rolling/Sliding Elastohydrodynamic Contacts. Journal of Tribology 128:1, pages 67.
Crossref
I. Riche & B. Villechaise. (2006) Use of the FFT to Determine the Subsurface Stresses Locally in Multilayered Elastic Solids Caused by a TEHL Loading. Journal of Tribology 128:1, pages 59-66.
Crossref
C. K. Gao, X. M. Qi, R. W. Snidle & H. P. Evans. 2006. IUTAM Symposium on Elastohydrodynamics and Micro-elastohydrodynamics. IUTAM Symposium on Elastohydrodynamics and Micro-elastohydrodynamics 423 434 .
Martin Hartl, Ivan Křupka & Dong Zhu. 2006. IUTAM Symposium on Elastohydrodynamics and Micro-elastohydrodynamics. IUTAM Symposium on Elastohydrodynamics and Micro-elastohydrodynamics 217 228 .
Q. Jane Wang & Dong Zhu. (2005) Virtual Texturing: Modeling the Performance of Lubricated Contacts of Engineered Surfaces. Journal of Tribology 127:4, pages 722-728.
Crossref
Ramesh Singh, Shreyes N. Melkote & Fukuo Hashimoto. (2005) Frictional response of precision finished surfaces in pure sliding. Wear 258:10, pages 1500-1509.
Crossref
Hong Lin, Robert R. Binoniemi, Gregory A. Fett & Mick Deis. Contact Fatigue Tests and Contact Fatigue Life Analysis. Contact Fatigue Tests and Contact Fatigue Life Analysis.
J. Castro, A. Campos, A. Sottomayor & J. Seabra. 2005. Life Cycle Tribology. Life Cycle Tribology 525 533 .
Ingrid Riche & Bernard Villechaise. (2004) Étude de la lubrification EHD rugueuse établie localement dans un palier. Mécanique & Industries 5:6, pages 677-684.
Crossref
Q. Jane Wang, Dong Zhu, Herbert S. Cheng, Tonghui Yu, Xiaofei Jiang & Shuangbiao Liu. (2004) Mixed Lubrication Analyses by a Macro-Micro Approach and a Full-Scale Mixed EHL Model. Journal of Tribology 126:1, pages 81-91.
Crossref
Wen-Zhong Wang, Yu-Chuan Liu, Hui Wang & Yuan-Zhong Hu. (2004) A Computer Thermal Model of Mixed Lubrication in Point Contacts. Journal of Tribology 126:1, pages 162-170.
Crossref
Dmitry Epstein, Q. Jane Wang, Leon M. Keer, Herbert S. Cheng, Dong Zhu, Stephen Harris & Arup Gangopadhyay. 2003. Tribological Research and Design for Engineering Systems, Proceedings of the 29th Leeds-Lyon Symposium on Tribology. Tribological Research and Design for Engineering Systems, Proceedings of the 29th Leeds-Lyon Symposium on Tribology 835 844 .
Dong Zhu. 2003. Tribological Research and Design for Engineering Systems, Proceedings of the 29th Leeds-Lyon Symposium on Tribology. Tribological Research and Design for Engineering Systems, Proceedings of the 29th Leeds-Lyon Symposium on Tribology 703 711 .
J. Castro, A. Sottomayor, A. Campos & J. Seabra. 2003. Tribological Research and Design for Engineering Systems, Proceedings of the 29th Leeds-Lyon Symposium on Tribology. Tribological Research and Design for Engineering Systems, Proceedings of the 29th Leeds-Lyon Symposium on Tribology 603 612 .
I. Křupka, M. Hartl & M. Liška. 2003. Tribological Research and Design for Engineering Systems, Proceedings of the 29th Leeds-Lyon Symposium on Tribology. Tribological Research and Design for Engineering Systems, Proceedings of the 29th Leeds-Lyon Symposium on Tribology 549 557 .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.