Advanced search
Publication Cover
Tribology Transactions Volume 44, 2001 - Issue 3
Submit an article Journal homepage
452
Views
119
CrossRef citations to date
0
Altmetric
Original Articles

Analysis of the Hydrodynamic Effects in a Surface Textured Circumferential Gas Seal

Yuri Kligerman Surface Technologies, Ltd., Nesher, 36601, Israel
&
Izhak Etsion Technion-Israel Institute of Technology, Department of Mechanical Engineering, Haifa, 32000, Israel
Pages 472-478 | Published online: 25 Mar 2008

Citations (119)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (9)

B. Manser, I. Belaidi, A. Hamrani, S. Khelladi & F. Bakir. (2020) Texture shape effects on hydrodynamic journal bearing performances using mass-conserving numerical approach. Tribology - Materials, Surfaces & Interfaces 14:1, pages 33-50.
Read now
N. Nuraliza, S. Syahrullail, D. M. Razak & C. S. N. Azwadi. (2016) Influence of micro-pits on sliding motion under low speeds for block-on-disk tribotester. Particulate Science and Technology 34:6, pages 754-763.
Read now
Saurabh Kumar Yadav & Satish C. Sharma. (2016) Performance of Hydrostatic Textured Thrust Bearing with Supply Holes Operating with Non-Newtonian Lubricant. Tribology Transactions 59:3, pages 408-420.
Read now
Shaoxian Bai, Xudong Peng & Linqing Bai. (2012) Experimental Investigation of an Inclined Ellipse Dimpled Gas Face Seal. Tribology Transactions 55:4, pages 512-517.
Read now
Alexey Shinkarenko, Yuri Kligerman & Izhak Etsion. (2010) Theoretical Analysis of Surface-Textured Elastomer Sleeve in Lubricated Rotary Sliding. Tribology Transactions 53:3, pages 376-385.
Read now
G. RYK, Y. KLIGERMAN, I. ETSION & A. SHINKARENKO. (2005) Experimental Investigation of Partial Laser Surface Texturing for Piston-Ring Friction Reduction. Tribology Transactions 48:4, pages 583-588.
Read now
V. Brizmer, Y. Kligerman & I. Etsion. (2003) A Laser Surface Textured Parallel Thrust Bearing. Tribology Transactions 46:3, pages 397-403.
Read now
G. Ryk, Y. Kligerman & I. Etsion. (2002) Experimental Investigation of Laser Surface Texturing for Reciprocating Automotive Components. Tribology Transactions 45:4, pages 444-449.
Read now
I. Etsion & G. Halperin. (2002) A Laser Surface Textured Hydrostatic Mechanical Seal. Tribology Transactions 45:3, pages 430-434.
Read now

Articles from other publishers (110)

Hardik Gangadia & Saurin Sheth. (2023) The Effect of Star Shaped Dimples on Sliding Surfaces under Hydrodynamic Lubrication. Tribology Online 18:7, pages 457-468.
Crossref
Igal Cohen & Roman Goltsberg. (2023) Partial Surface Texturing in Hydrodynamic Lubrication: A CFD-Based Investigation. Lubricants 11:9, pages 395.
Crossref
Weizheng Zhang, Lishan Xu, Yueyue Sun, Yanan Ren & Xuexing Ding. (2023) The influence of different structural parameters on lift off speed of spring groove gas seal. Journal of the Brazilian Society of Mechanical Sciences and Engineering 45:9.
Crossref
Wen’an Wang, Zhiqi Liu & Dongliang Chen. (2023) Influence of different oil flow directions on the friction performance of asymmetric structures in heavy load hydraulic friction pairs. AIP Advances 13:1.
Crossref
Dan Li, Xuefeng Yang, Yuanbo Wu, Jian Cheng, Shouren Wang, Zhuang Wan, Wenbo Liu & Guofeng Xia. (2022) Theoretical Analysis and Experimental Research of Surface Texture Hydrodynamic Lubrication. Chinese Journal of Mechanical Engineering 35:1.
Crossref
Bowen Jiao, Yuyang Liu, Tongyang Li, Xiqun Lu & Xuan Ma. (2022) Macro-texture in hydrodynamic lubrication: Effects of dimple parameter, density and distribution. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 236:15, pages 8703-8713.
Crossref
Mun Ki Bae, Tae Hwan Jang, Min Su Kim, Jin Uk Gwon & Tae Gyu Kim. (2022) Friction wear characteristics of a femtosecond laser-patterned amorphous carbon thin film. Modern Physics Letters B 36:16.
Crossref
Hongju Li, Ying Liu, Haoran Liao & Zhurong Liang. (2022) Accelerated Wear Test Design Based on Dissipation Wear Model Entropy Analysis under Mixed Lubrication. Lubricants 10:4, pages 71.
Crossref
Linqing Bai, Pengcheng Zhang & Zulfiqar Ahmad Khan. (2021) Semi Salix Leaf Textured Gas Mechanical Face Seal with Enhanced Opening Performance. Materials 14:24, pages 7522.
Crossref
Christopher K. Dawari, Inzimam Haq, Kari Mönkkönen, Mika Suvanto & Jarkko J. Saarinen. (2021) Reduced sliding friction on flat and microstructured metal injection molded (MIM) WC-Co hard metals with MoS2 composite lubricants. Tribology International 160, pages 107020.
Crossref
Sriharitha Rowthu, Pushkar Deshpande, Adithyan Annamalai & Patrik Hoffmann. (2021) Harnessing nano oil reservoir network for generating low friction and wear in self-mating alumina. Materials & Design 206, pages 109821.
Crossref
M.M. Khonsari, Sahar Ghatrehsamani & Saleh Akbarzadeh. (2021) On the running-in nature of metallic tribo-components: A review. Wear 474-475, pages 203871.
Crossref
V. Kashyap & P. Ramkumar. 2021. Recent Advances in Mechanical Engineering. Recent Advances in Mechanical Engineering 185 192 .
Liu Yajun, Luo Qi, Zhang Shenchao & Wang Liya. (2020) Numerical Simulation of Lubrication Film in Piston Ring of Fuel Dispenser Flowmeter Based on Hydrodynamic Lubrication. Numerical Simulation of Lubrication Film in Piston Ring of Fuel Dispenser Flowmeter Based on Hydrodynamic Lubrication.
Ping Lu & Robert J K Wood. (2020) Tribological performance of surface texturing in mechanical applications—a review. Surface Topography: Metrology and Properties 8:4, pages 043001.
Crossref
Paolo Casoli, Fabio Scolari, Massimo Rundo, Antonio Lettini & Manuel Rigosi. (2020) CFD Analyses of Textured Surfaces for Tribological Improvements in Hydraulic Pumps. Energies 13:21, pages 5799.
Crossref
H. Kovacı & Y. Seçer. (2020) Improved tribological performance of AISI 316L stainless steel by a combined surface treatment: Surface texturing by selective laser melting and plasma nitriding. Surface and Coatings Technology 400, pages 126178.
Crossref
Nilesh D. Hingawe & Skylab P. Bhore. (2019) Multi-objective optimization of the design parameters of texture bottom profiles in a parallel slider. Friction 8:4, pages 726-745.
Crossref
T A Rodrigues, R V Arencibia, H L Costa & W M da Silva. (2020) Roughness analysis of electrochemically textured surfaces: effects on friction and wear of lubricated contacts. Surface Topography: Metrology and Properties 8:2, pages 024011.
Crossref
Liping Shi, Wei Wei, Tao Wang, Yicong Zhang, Wei Zhu & Xiaolei Wang. (2020) Experimental investigation of the effect of typical surface texture patterns on mechanical seal performance. Journal of the Brazilian Society of Mechanical Sciences and Engineering 42:5.
Crossref
Wenlong Song, Shoujun Wang, Zixiang Xia & Xuan Zhang. (2019) Effect of microhole-textures filled with graphite on tribological properties of WC/TiC/Co carbide tools. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 233:11, pages 1627-1638.
Crossref
Vivek Kumar & Satish C. Sharma. (2019) Effect of geometric shape of micro-grooves on the performance of textured hybrid thrust pad bearing. Journal of the Brazilian Society of Mechanical Sciences and Engineering 41:11.
Crossref
Vivek Kumar, Satish C. Sharma & Kuldeep Narwat. (2019) Influence of micro-groove attributes on frictional power loss and load-carrying capacity of hybrid thrust bearing. Industrial Lubrication and Tribology 72:5, pages 589-598.
Crossref
Minghua Pang, Xiaojun Liu & Kun Liu. (2018) Effect of conical micro-grooved texture on tool–chip friction property and cutting performance of WC-TiC/Co cemented carbide tools. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 233:5, pages 791-804.
Crossref
Xuan Ma, Q. Jane Wang, Xiqun Lu & Viral S. Mehta. (2019) Piston surface design to improve the lubrication performance of a swash plate pump. Tribology International 132, pages 275-285.
Crossref
Abhishek Kumar & Satish C. Sharma. (2019) Textured conical hybrid journal bearing with ER lubricant behavior. Tribology International 129, pages 363-376.
Crossref
Bai Shaoxian & Wen Shizhu. 2019. Gas Thermohydrodynamic Lubrication and Seals. Gas Thermohydrodynamic Lubrication and Seals 179 195 .
Sriharitha Rowthu & Patrik Hoffmann. 2019. Functional Nanostructured Interfaces for Environmental and Biomedical Applications. Functional Nanostructured Interfaces for Environmental and Biomedical Applications 27 62 .
Haytam Kasem, Ori Stav, Philipp Grützmacher & Carsten Gachot. (2018) Effect of Low Depth Surface Texturing on Friction Reduction in Lubricated Sliding Contact. Lubricants 6:3, pages 62.
Crossref
Xiangkai Meng & M.M. khonsari. (2018) Viscosity wedge effect of dimpled surfaces considering cavitation effect. Tribology International 122, pages 58-66.
Crossref
A. Codrignani, B. Frohnapfel, F. Magagnato, P. Schreiber, J. Schneider & P. Gumbsch. (2018) Numerical and experimental investigation of texture shape and position in the macroscopic contact. Tribology International 122, pages 46-57.
Crossref
José Jaime Taha-Tijerina, GerardoTadeo Garza & Demófilo Maldonado-Cortés. (2018) Evaluation of parameters for application of Laser Surface Texturing (LST) in tooling for the sheet-metal forming process. Industrial Lubrication and Tribology 70:4, pages 620-627.
Crossref
Hiroyuki Yamada, Hiroo Taura & Satoru Kaneko. (2018) Numerical and Experimental Analyses of the Dynamic Characteristics of Journal Bearings With Square Dimples. Journal of Tribology 140:1.
Crossref
Davinder Singh, Navneet Singh & RK Awasthi. (2018) Effect of surface texture parameters on the performance of finite slider bearing. Materials Today: Proceedings 5:9, pages 19349-19358.
Crossref
Bojan Podgornik. 2017. Friction, Lubrication, and Wear Technology. Friction, Lubrication, and Wear Technology 706 722 .
Sriharitha Rowthu, Edin E Balic & Patrik Hoffmann. (2017) Molecular dimensions and surface diffusion assisted mechanically robust slippery perfluoropolyether impregnated mesoporous alumina interfaces. Nanotechnology 28:50, pages 505605.
Crossref
Kangmei Li, Dalei Jing, Jun Hu, Xiaohong Ding & Zhenqiang Yao. (2017) Numerical investigation of the tribological performance of micro-dimple textured surfaces under hydrodynamic lubrication. Beilstein Journal of Nanotechnology 8, pages 2324-2338.
Crossref
L. M. Vilhena, A. Ramalho & A. Cavaleiro. (2017) Grooved surface texturing by electrical discharge machining (EDM) under different lubrication regimes. Lubrication Science 29:7, pages 493-501.
Crossref
Chenbo Ma, Jianjun Sun, Yan Wang, Bo Yu, Qiuping Yu & Qiaoan Tu. (2017) On the optimum dimple depth-over-diameter ratio for textured surfaces. Advances in Mechanical Engineering 9:9, pages 168781401772008.
Crossref
Hiroyuki YamadaHiroo TauraSatoru Kaneko. (2017) Static Characteristics of Journal Bearings With Square Dimples. Journal of Tribology 139:5.
Crossref
Morteza Taee, Amir Torabi, Saleh Akbarzadeh, M. M. Khonsari & Mohsen Badrossamay. (2017) On the Performance of EHL Contacts with Textured Surfaces. Tribology Letters 65:3.
Crossref
A. M. Kovalchenko, A. Erdemir, O. O. Ajayi & I. Etsion. (2017) Tribological Behavior of Oil-Lubricated Laser Textured Steel Surfaces in Conformal Flat and Non-Conformal Contacts. Materials Performance and Characterization 6:2, pages MPC20160013.
Crossref
Yanfeng Han, Jiaxu Wang, Guangwu Zhou, Ke Xiao & Junyang Li. (2016) Micro-bottom shape effects on the misaligned herringbone grooved axial piston bearing with a new parallel algorithm. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 231:5, pages 637-654.
Crossref
Daehun Lee, Sang-Shin Park, Tae Jo Ko & Jaesool Shim. (2017) Effect of the Texture Shape Aspect Ratio on Friction Reduction in a Hydrodynamic Lubrication Regime. Journal of the Korean Society of Manufacturing Process Engineers 16:2, pages 63-68.
Crossref
Wengang Chen, Xueyuan Liu & Lili Zheng. (2017) Study on the friction characteristics of 304 steel with composite surface modification. Industrial Lubrication and Tribology 69:2, pages 248-258.
Crossref
Hisham A Abdel-Aal. (2016) Functional surfaces for tribological applications: inspiration and design. Surface Topography: Metrology and Properties 4:4, pages 043001.
Crossref
Liping Shi, Xiuying Wang, Xiao Su, Wei Huang & Xiaolei Wang. (2016) Comparison of the Load-Carrying Performance of Mechanical Gas Seals Textured With Microgrooves and Microdimples. Journal of Tribology 138:2.
Crossref
Arslan Ahmed, H. H. Masjuki, M. Varman, M. A. Kalam, M. Habibullah & K. A. H. Al Mahmud. (2015) An overview of geometrical parameters of surface texturing for piston/cylinder assembly and mechanical seals. Meccanica 51:1, pages 9-23.
Crossref
Xiuqing Hao, Shiyuan Pei, Li Wang, Hua Xu, Ning He & Bingheng Lu. (2014) Microtexture fabrication on cylindrical metallic surfaces and its application to a rotor-bearing system. The International Journal of Advanced Manufacturing Technology 78:5-8, pages 1021-1029.
Crossref
Simon Medina, Mark T Fowell, Sorin-Cristian Vladescu, Tom Reddyhoff, Ian Pegg, Andrew V Olver & Daniele Dini. (2015) Transient effects in lubricated textured bearings. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 229:4, pages 523-537.
Crossref
Xiaolei Wang, Jingqiu Wang, Bo Zhang & Wei Huang. (2014) Design principles for the area density of dimple patterns. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 229:4, pages 538-546.
Crossref
Tomoko Hirayama, Heinosuke Shiotani, Kazuki Yamada, Naoki Yamashita, Takashi Matsuoka, Hiroshi Sawada & Kosuke Kawahara. (2015) Hydrodynamic Performance Produced by Nanotexturing in Submicrometer Clearance With Surface Roughness. Journal of Tribology 137:1.
Crossref
Wang Wenzhong, Shen Dian, Zhang Shengguang & Zhao Ziqiang. (2015) Investigation of Patterned Textures in Ball-on-Disk Lubricated Point Contacts. Journal of Tribology 137:1.
Crossref
Matthias Bieda, Cindy Schmädicke, Teja Roch & Andrés Lasagni. (2015) Ultra-Low Friction on 100Cr6-Steel Surfaces After Direct Laser Interference Patterning. Advanced Engineering Materials 17:1, pages 102-108.
Crossref
Ling Wang. (2014) Use of structured surfaces for friction and wear control on bearing surfaces. Surface Topography: Metrology and Properties 2:4, pages 043001.
Crossref
Satish C. Sharma & Saurabh K. Yadav. (2014) Performance analysis of a fully textured hybrid circular thrust pad bearing system operating with non-Newtonian lubricant. Tribology International 77, pages 50-64.
Crossref
Shigeru Yonemura, Susumu Isono, Masashi Yamaguchi, Yoshiaki Kawagoe, Takanori Takeno, Hiroyuki Miki & Toshiyuki Takagi. (2014) Mechanism of Levitation of a Slider with a Micro/Nanoscale Surface Structure on a Rotating Disk. Tribology Letters 55:3, pages 437-454.
Crossref
Lichun Hao, Yonggang Meng & Cheng Chen. (2014) Experimental investigation on effects of surface texturing on lubrication of initial line contacts. Lubrication Science 26:5, pages 363-373.
Crossref
Saurabh Kumar Yadav & Satish C. Sharama. (2014) Performance Comparison of Partial and Full Textured Thrust Bearing Operating with Non-Newtonian Lubricant. Applied Mechanics and Materials 592-594, pages 1376-1380.
Crossref
Tomoko Hirayama, Mitsutaka Ikeda, Toshiteru Suzuki, Takashi Matsuoka, Hiroshi Sawada & Kosuke Kawahara. (2014) Effect of Nanotexturing on Increase in Elastohydrodynamic Lubrication Oil Film Thickness. Journal of Tribology 136:3.
Crossref
Robert Jackson & Jiang Lei. (2014) Hydrodynamically Lubricated and Grooved Biomimetic Self-Adapting Surfaces. Journal of Functional Biomaterials 5:2, pages 78-98.
Crossref
Mingfeng Qiu, Brian N. Bailey, Rob Stoll & Bart Raeymaekers. (2014) The accuracy of the compressible Reynolds equation for predicting the local pressure in gas-lubricated textured parallel slider bearings. Tribology International 72, pages 83-89.
Crossref
Jinghu Ji, Yonghong Fu & Qinsheng Bi. (2014) The influence of partially textured slider with orientation ellipse dimples on the behavior of hydrodynamic lubrication. Industrial Lubrication and Tribology 66:2, pages 161-167.
Crossref
Ismail Syed & M. Sarangi. (2014) Hydrodynamic lubrication with deterministic micro textures considering fluid inertia effect. Tribology International 69, pages 30-38.
Crossref
Shaoni Sun, Liyang Xie, Yichen Zhang & Hui Li. (2013) Experimental study on friction and wear performance of non-smooth brake surface. Experimental study on friction and wear performance of non-smooth brake surface.
Ali Gökhan Demir, Barbara Previtali & Nora Lecis. (2013) Development of laser dimpling strategies on TiN coatings for tribological applications with a highly energetic Q-switched fibre laser. Optics & Laser Technology 54, pages 53-61.
Crossref
Mingfeng Qiu, Bret R. Minson & Bart Raeymaekers. (2013) The effect of texture shape on the friction coefficient and stiffness of gas-lubricated parallel slider bearings. Tribology International 67, pages 278-288.
Crossref
Izhak Etsion. (2013) Modeling of surface texturing in hydrodynamic lubrication. Friction 1:3, pages 195-209.
Crossref
Zhaoqiang Wang, Linyi Gu & Lin Li. (2013) Experimental studies on the overall efficiency performance of axial piston motor with a laser surface textured valve plate. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 227:7, pages 1049-1056.
Crossref
Kazuyuki Yagi & Joichi Sugimura. (2013) Balancing Wedge Action: A Contribution of Textured Surface to Hydrodynamic Pressure Generation. Tribology Letters 50:3, pages 349-364.
Crossref
Wen-zhong Wang, Zhixiang Huang, Dian Shen, Lingjia Kong & Shanshan Li. (2013) The Effect of Triangle-Shaped Surface Textures on the Performance of the Lubricated Point-Contacts. Journal of Tribology 135:2.
Crossref
Haiwu Yu, Wei Huang & Xiaolei Wang. (2011) Dimple patterns design for different circumstances. Lubrication Science 25:2, pages 67-78.
Crossref
Mingfeng Qiu, Adis Delic & Bart Raeymaekers. (2012) The Effect of Texture Shape on the Load-Carrying Capacity of Gas-Lubricated Parallel Slider Bearings. Tribology Letters 48:3, pages 315-327.
Crossref
Gonzalo Brito Gadeschi, Katja Backhaus & Gunther Knoll. (2012) Numerical Analysis of Laser-Textured Piston-Rings in the Hydrodynamic Lubrication Regime. Journal of Tribology 134:4.
Crossref
Bo Zhang, Wei Huang & Xiaolei Wang. (2012) Biomimetic surface design for ultrahigh molecular weight polyethylene to improve the tribological properties. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 226:8, pages 705-713.
Crossref
Hui Qin Hao, Xin Qi Yu, Qing Gang Liu & Jia Hui Yu. (2012) Numerical Analysis on Sealing Properties of Mechanical Seals with a Laser-Textured Face. Applied Mechanics and Materials 189, pages 429-432.
Crossref
Ze Wu, Jianxin Deng, Hui Zhang, Yunsong Lian & Jun Zhao. (2012) Tribological behavior of textured cemented carbide filled with solid lubricants in dry sliding with titanium alloys. Wear 292-293, pages 135-143.
Crossref
Shaoxian Bai, Xudong Peng, Yefeng Li & Songen Sheng. (2012) Gas Lubrication Analysis Method of Step-Dimpled Face Mechanical Seals. Journal of Tribology 134:1.
Crossref
Sławomir Błasiak & Czesław Kundera. (2012) A Numerical Analysis of the Grooved Surface Effects on the Thermal Behavior of a Non-Contacting Face Seal. Procedia Engineering 39, pages 315-326.
Crossref
Y. Kligerman & A. Shinkarenko. (2011) The effect of tapered edges on lubrication regimes in surface-textured elastomer seals. Tribology International 44:12, pages 2059-2066.
Crossref
Chenbo Ma & Hua Zhu. (2011) An optimum design model for textured surface with elliptical-shape dimples under hydrodynamic lubrication. Tribology International 44:9, pages 987-995.
Crossref
Xiuqing Hao, Li Wang, Quandai Wang, Fangliang Guo, Yiping Tang, Yucheng Ding & Bingheng Lu. (2011) Surface micro-texturing of metallic cylindrical surface with proximity rolling-exposure lithography and electrochemical micromachining. Applied Surface Science 257:21, pages 8906-8911.
Crossref
Andriy Kovalchenko, Oyelayo Ajayi, Ali Erdemir & George Fenske. (2011) Friction and wear behavior of laser textured surface under lubricated initial point contact. Wear 271:9-10, pages 1719-1725.
Crossref
Piotr Stępień. (2011) Deterministic and stochastic components of regular surface texture generated by a special grinding process. Wear 271:3-4, pages 514-518.
Crossref
Kristian Tønder. (2010) Dimpled pivoted plane bearings: Modified coefficients. Tribology International 43:12, pages 2303-2307.
Crossref
D Zhu, T Nanbu, N Ren, Y Yasuda & Q J Wang. (2010) Model-based virtual surface texturing for concentrated conformal-contact lubrication. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 224:8, pages 685-696.
Crossref
Shaoxian Bai, Xudong Peng, Yefeng Li & Songen Sheng. (2010) A Hydrodynamic Laser Surface-Textured Gas Mechanical Face Seal. Tribology Letters 38:2, pages 187-194.
Crossref
Robert L. Jackson. (2010) A Scale Dependent Simulation of Liquid Lubricated Textured Surfaces. Journal of Tribology 132:2.
Crossref
Haiwu Yu, Xiaolei Wang & Fei Zhou. (2009) Geometric Shape Effects of Surface Texture on the Generation of Hydrodynamic Pressure Between Conformal Contacting Surfaces. Tribology Letters 37:2, pages 123-130.
Crossref
A. Shinkarenko, Y. Kligerman & I. Etsion. (2009) The Validity of Linear Elasticity in Analyzing Surface Texturing Effect for Elastohydrodynamic Lubrication. Journal of Tribology 131:2.
Crossref
A. Shinkarenko, Y. Kligerman & I. Etsion. (2009) The effect of surface texturing in soft elasto-hydrodynamic lubrication. Tribology International 42:2, pages 284-292.
Crossref
K. Tønder. (2008) Effects of striated texturing on pivoted gas sliders. Tribology International 41:9-10, pages 896-900.
Crossref
Jiadao Wang, Zhongling Han, Haosheng Chen & Darong Chen. (2008) Drag Reduction by Dimples on Surfaces in Plane–Plane Contact Lubrication. Tribology Letters 31:3, pages 159-166.
Crossref
Ning Ren, Toshikazu Nanbu, Yoshiteru Yasuda, Dong Zhu & Qian Wang. (2007) Micro Textures in Concentrated-Conformal-Contact Lubrication: Effect of Distribution Patterns. Tribology Letters 28:3, pages 275-285.
Crossref
Aravind N. Murthy, Izhak Etsion & Frank E. Talke. (2007) Analysis of Surface Textured Air Bearing Sliders with Rarefaction Effects. Tribology Letters 28:3, pages 251-261.
Crossref
Xiao Wang, Jian Li, Wei Chen, Lan Cai & Jian Ying Zhu. (2007) Influence of Laser Micro-Mesh Texturing on the Tribological Performance in an EHL Point Contact. Key Engineering Materials 353-358, pages 796-800.
Crossref
Bart Raeymaekers, Izhak Etsion & Frank E. Talke. (2007) A Model for Magnetic Tape/Guide Friction Reduction by Laser Surface Texturing. Tribology Letters 28:1, pages 9-17.
Crossref
Xiaobin Lu & M. M. Khonsari. (2007) An Experimental Investigation of Dimple Effect on the Stribeck Curve of Journal Bearings. Tribology Letters 27:2.
Crossref
Bart Raeymaekers, Izhak Etsion & Frank E. Talke. (2007) Enhancing tribological performance of the magnetic tape/guide interface by laser surface texturing. Tribology Letters 27:1.
Crossref
Y. Feldman, Y. Kligerman & I. Etsion. (2007) Stiffness and Efficiency Optimization of a Hydrostatic Laser Surface Textured Gas Seal. Journal of Tribology 129:2, pages 407-410.
Crossref
M. Fowell, A. V. Olver, A. D. Gosman, H. A. Spikes & I. Pegg. (2007) Entrainment and Inlet Suction: Two Mechanisms of Hydrodynamic Lubrication in Textured Bearings. Journal of Tribology 129:2, pages 336-347.
Crossref
Min Zou, Hengyu Wang, P.R. Larson, K.L. Hobbs, M.B. Johnson & O.K. Awitor. (2006) Ni nanodot-patterned surfaces for adhesion and friction reduction. Tribology Letters 24:2, pages 137-142.
Crossref
Y. Feldman, Y. Kligerman & I. Etsion. (2006) A Hydrostatic Laser Surface Textured Gas Seal. Tribology Letters 22:1, pages 21-28.
Crossref
Q. Jane Wang & Dong Zhu. (2005) Virtual Texturing: Modeling the Performance of Lubricated Contacts of Engineered Surfaces. Journal of Tribology 127:4, pages 722-728.
Crossref
Izhak Etsion. (2005) State of the Art in Laser Surface Texturing. Journal of Tribology 127:1, pages 248-253.
Crossref
I. Etsion. (2004) Improving Tribological Performance of Mechanical Components by Laser Surface Texturing. Tribology Letters 17:4, pages 733-737.
Crossref
A. D. McNickle & I. Etsion. (2004) Near-Contact Laser Surface Textured Dry Gas Seals. Journal of Tribology 126:4, pages 788-794.
Crossref
Mihai Arghir, Nicolas Roucou, Mathieu Helene & Jean Frene. (2003) Theoretical Analysis of the Incompressible Laminar Flow in a Macro-Roughness Cell. Journal of Tribology 125:2, pages 309-318.
Crossref
. (2003) A laser surface textured hydrostatic mechanical seal. Sealing Technology 2003:3, pages 6-10.
Crossref
Manabu Wakuda, Yukihiko Yamauchi, Shuzo Kanzaki & Yoshiteru Yasuda. (2003) Effect of surface texturing on friction reduction between ceramic and steel materials under lubricated sliding contact. Wear 254:3-4, pages 356-363.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.