403
Views
18
CrossRef citations to date
0
Altmetric
Original Articles

A Comparative Study of the Microabrasion Wear Behavior of CoNiCrAlY Coatings Fabricated by APS, HVOF, and CGDS Techniques

, , , &
Pages 11-17 | Received 26 Dec 2012, Accepted 24 Jun 2013, Published online: 26 Dec 2013

Keep up to date with the latest research on this topic with citation updates for this article.

Read on this site (4)

Chaosheng Ma, Wenbo Yu, Guozheng Ma & Wang Haidou. (2023) Recent progress on high temperature radar absorbing coatings (RACs): a review. Critical Reviews in Solid State and Materials Sciences 48:6, pages 726-753.
Read now
Alin Constantin Murariu, Anghel Vasile Cernescu & Ion-Aurel Perianu. (2018) The effect of saline environment on the fatigue behaviour of HVOF-sprayed WC–CrC–Ni coatings. Surface Engineering 34:10, pages 755-761.
Read now
A. C. Karaoglanli, A. Turk & I. Ozdemir. (2016) Effect of sintering on mechanical properties of cold sprayed thermal barrier coatings. Surface Engineering 32:9, pages 686-690.
Read now
Halil Çalişkan, Peter Panjan & Srecko Paskvale. (2014) Monitoring of Wear Characteristics of TiN and TiAlN Coatings at Long Sliding Distances. Tribology Transactions 57:3, pages 496-502.
Read now

Articles from other publishers (14)

Miklós Jakab, Osamah Ihsan Ali, István Gábor Gyurika, Tamás Korim & Judit Telegdi. (2023) The Tribological Behavior of TiN/TiC CVD Coatings under Dry Sliding Conditions against Zirconia and Steel Counterparts. Coatings 13:5, pages 832.
Crossref
Pragyan Senapati, Harekrushna Sutar, Rabiranjan Murmu & Shubham Gupta. 2023. Recent Advances in Mechanical Engineering. Recent Advances in Mechanical Engineering 623 629 .
N. Purushotham, B. Rajasekaran, N.L. Parthasarathi, K. Praveen & G. Sivakumar. (2022) Sliding wear behaviour of Ni-5 %Al coating deposited by detonation spray on IN718. Materials Today: Proceedings 65, pages 3741-3747.
Crossref
Yi Yanliang, Long Shaolei, Zhang Rui, Wu Changyi & Zhou Shengfeng. (2021) Influence of Al2O3 particles on the tribological properties of CoCrAlYTa coating produced by laser-induction hybrid cladding. Ceramics International 47:14, pages 19434-19442.
Crossref
M. Ashokkumar, D. Thirumalaikumarasamy, P. Thirumal & R. Barathiraja. (2021) Influences of Mechanical, Corrosion, erosion and tribological performance of cold sprayed Coatings A review. Materials Today: Proceedings 46, pages 7581-7587.
Crossref
Purusharth Bhati, Vishal Shrama, Raghav Jha, Sujeet Gupta, Mohit Vishnoi & T. G. Mamatha. 2021. Advances in Fluid and Thermal Engineering. Advances in Fluid and Thermal Engineering 559 574 .
Azmi Erdogan. (2019) Boriding Temperature Effect on Micro-Abrasion Wear Resistance of Borided Tool Steel. Journal of Tribology 141:12.
Crossref
Mecit Öge, Yilmaz Kucuk, Mustafa S. Gok & Abdullah Cahit Karaoglanli. (2019) Comparison of dry sliding wear behavior of plasma sprayed FeCr slag coating with Cr 2 O 3 and Al 2 O 3 ‐13TiO 2 coatings . International Journal of Applied Ceramic Technology 16:6, pages 2283-2298.
Crossref
Azmi Erdoğan & Emre Altaş. (2019) Experimental study on micro-abrasion behavior of hard coatings: the role of load, sliding distance and abrasive particle size. Materials Research Express 6:11, pages 116430.
Crossref
Abou Bakr Elshalakany, T.A. Osman, W. Hoziefa, Angel Vicente Escuder & V. Amigó. (2019) Comparative study between high-velocity oxygen fuel and flame spraying using MCrAlY coats on a 304 stainless steel substrate. Journal of Materials Research and Technology 8:5, pages 4253-4263.
Crossref
Rajab Ali Seraj, Amir Abdollah-zadeh, Sergi Dosta, Hamid Assadi & Irene Garcia Cano. (2019) Comparison of Stellite coatings on low carbon steel produced by CGS and HVOF spraying. Surface and Coatings Technology 372, pages 299-311.
Crossref
Yao Chen, Xueling Fan, Yongle Sun & Weixu Zhang. (2018) Effect of tensile load on high temperature oxidation of CoNiCrAlY coating. Surface and Coatings Technology 352, pages 399-405.
Crossref
Ali Gunen & Erdogan Kanca. (2017) Microstructure and Mechanical Properties of Borided Inconel 625 Superalloy. Matéria (Rio de Janeiro) 22:2.
Crossref
Ali Günen, Yılmaz Küçük, Yusuf Er, V. Veli Çay, Mecit Öge & M. Sabri Gök. (2015) Effect of the powder particle size on the wear behavior of boronized AISI 304 stainless steel. Materials Testing 57:5, pages 468-473.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.