Shanshan Wei & Morel Groper. (2022) Implementation of the Elrod Algorithm in Practical Design of an Axial Lubricant Supply Groove in Journal Bearings. Journal of Tribology 144:12.
Crossref

Hongli Jia & Hongbing Xin. (2021) Study on Lubrication Characteristics of Novel Forced Wave Generator of Harmonic Drive without Flexible Bearing. Materials 15:1, pages 215.
Crossref

Jagjit Singh Maan & R.K. Awasthi. (2021) Effect of texture location on performance characteristics of two-lobe hydrodynamic journal bearing under turbulent regime. Materials Today: Proceedings 47, pages 5575-5583.
Crossref

Anil Singh & Satish C. Sharma. (2020) Analysis of a double layer porous hybrid journal bearing considering the combined influence of wear and non-Newtonian behaviour of lubricant. Meccanica 56:1, pages 73-98.
Crossref

Diogo Stuani Alves, Gregory Bregion Daniel, Helio Fiori de Castro, Tiago Henrique Machado, Katia Lucchesi Cavalca, Ozhan Gecgel, João Paulo Dias & Stephen Ekwaro-Osire. (2020) Uncertainty quantification in deep convolutional neural network diagnostics of journal bearings with ovalization fault. Mechanism and Machine Theory 149, pages 103835.
Crossref

D. Y. Dhande, G. H. Lanjewar & D. W. Pande. (2018) Implementation of CFD–FSI Technique Coupled with Response Surface Optimization method for Analysis of Three-Lobe Hydrodynamic Journal Bearing. Journal of The Institution of Engineers (India): Series C 100:6, pages 955-966.
Crossref

Krishnkant Sahu & Satish C Sharma. (2019) Magneto-rheological fluid slot-entry journal bearing considering thermal effects. Journal of Intelligent Material Systems and Structures 30:18-19, pages 2831-2852.
Crossref

Alfredo Jaramillo & Gustavo C. Buscaglia. (2019) A stable numerical strategy for Reynolds-Rayleigh-Plesset coupling. Tribology International 130, pages 191-205.
Crossref

A.R.G. Silveira & Gregory Bregion Daniel. (2019) Influence of bearing ovalization in the dynamic of a planar slider-crank mechanism. Applied Mathematical Modelling 66, pages 175-194.
Crossref

Fuma Sakai, Masayuki Ochiai & Hiromu Hashimoto. (2018) Two-Phase Flow CFD Analysis of Temperature Effects on Oil Supplied to Small-Bore Journal Bearing with Oil Supply Groove. Tribology Online 13:5, pages 232-240.
Crossref

D. Y. Dhande, D. W. Pande & G. H. Lanjewar. (2018) Numerical analysis of three lobe hydrodynamic journal bearing using CFD–FSI technique based on response surface evaluation. Journal of the Brazilian Society of Mechanical Sciences and Engineering 40:8.
Crossref

Fuma SAKAI, Masayuki OCHIAI & Hiromu HASHIMOTO. (2017) Stability characteristics and CFD analysis of two-phase flow of oil film journal bearing having two oil filler holes. Transactions of the JSME (in Japanese) 83:848, pages 16-00457-16-00457.
Crossref

Athanasios Chasalevris. (2015) Analytical Evaluation of the Static and Dynamic Characteristics of Three-Lobe Journal Bearings With Finite Length. Journal of Tribology 137:4.
Crossref

Dun Lu, Wanhua Zhao, Bingheng Lu & Jun Zhang. (2014) The maximum dynamic eccentricity ratio of hydrodynamic rolling hybrid bearings. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 229:2, pages 168-177.
Crossref

Dun Lu, Wanhua Zhao, Bingheng Lu & Jun Zhang. (2014) The Maximum Allowable Misalignment in Hydrodynamic Rolling Hybrid Bearings. Journal of Engineering for Gas Turbines and Power 136:8.
Crossref

Dun Lu, Wanhua Zhao, Bingheng Lu & Jun Zhang. (2013) Cage Speed of Hydrodynamic Rolling Hybrid Bearings. Tribology Letters 51:3, pages 303-309.
Crossref

Dun Lu, Wanhua Zhao, Bingheng Lu & Jun Zhang. (2012) Static characteristics of a new hydrodynamic–rolling hybrid bearing. Tribology International 48, pages 87-92.
Crossref

Khalid Zarbane, Thami Zeghloul & Mohamed Hajjam. (2011) A numerical study of lubricant film behaviour subject to periodic loading. Tribology International 44:12, pages 1659-1667.
Crossref

Dun Lui, Wanhua Zhao, Bingheng Lu & Jun Zhang. (2011) A zero wear assembly of a hydrodynamic bearing and a rolling bearing. A zero wear assembly of a hydrodynamic bearing and a rolling bearing.

Hiromu Hashimoto & Masayuki Ochiai. (2010) Stabilization Method for Small-Bore Journal Bearings Utilizing Starved Lubrication. Journal of Tribology 132:1.
Crossref

Masayuki OCHIAI, Masaya KOBAYASHI & Hiromu HASHIMOTO. (2009) Development of safety and secure system of high-speed oil film journal bearing using supply oil quantity control. Journal of Advanced Science 21:3/4, pages 48-52.
Crossref

Hiromu Hashimoto & Masayuki Ochiai. (2009) Experimental Study on the Stabilization of Small-Bore Journal Bearings by Controlling Starved Lubrication and Bearing Orientation Angle. Journal of Tribology 131:1.
Crossref

N Tala Ighil, A Bounif & P Maspeyrot. (2008) Thermo-hydrodynamic study of the journal bearing under static load. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 222:9, pages 1801-1809.
Crossref

R.K. Awasthi, Satish C. Sharma & S.C. Jain. (2007) Performance of worn non-recessed hole-entry hybrid journal bearings. Tribology International 40:5, pages 717-734.
Crossref

R.K. Awasthi, S.C. Jain & Satish C. Sharma. (2006) Finite element analysis of orifice-compensated multiple hole-entry worn hybrid journal bearing. Finite Elements in Analysis and Design 42:14-15, pages 1291-1303.
Crossref

B-H Rho & K-W Kim. (2016) The effect of active control on stability characteristics of hydrodynamic journal bearings with an axial groove. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 216:9, pages 939-946.
Crossref

Byoung-Hoo Rho & Kyung-Woong Kim. (2002) A study of the dynamic characteristics of synchronously controlled hydrodynamic journal bearings. Tribology International 35:5, pages 339-345.
Crossref

Byoung-Hoo RHOKyung-Woong KIM. (2002) A Study on Stability Characteristics of Actively Controlled Hydrodynamic Journal Bearings.. JSME International Journal Series C 45:1, pages 239-245.
Crossref

H. Hashimoto & K. Matsumoto. (2001) Improvement of Operating Characteristics of High-Speed Hydrodynamic Journal Bearings by Optimum Design: Part I— Formulation of Methodology and Its Application to Elliptical Bearing Design. Journal of Tribology 123:2, pages 305-312.
Crossref

Bruno Vincent, Patrick Maspeyrot & Jean Frene. (1996) Cavitation in dynamically loaded journal bearings using mobility method. Wear 193:2, pages 155-162.
Crossref

A. Hussain, K. Mistry, S. Biswas & K. Athre. (1996) Thermal Analysis of Noncircular Bearings. Journal of Tribology 118:1, pages 246-254.
Crossref

D. Bonneau, D. Guines, J. Freˆne & J. Toplosky. (1995) EHD Analysis, Including Structural Inertia Effects and a Mass-Conserving Cavitation Model. Journal of Tribology 117:3, pages 540-547.
Crossref

B. Vincent, P. Maspeyrot & J. Frěne. 1995. Lubricants and Lubrication - Proceedings of the 21th leeds-Lyon Symposium on Tribology. Lubricants and Lubrication - Proceedings of the 21th leeds-Lyon Symposium on Tribology 455 464 .

D. Vijayaraghavan, D.E. Brewe & T.G. KeithJr.Jr.. 1991. Vehicle Tribology. Vehicle Tribology 81 89 .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.

People also read
Recommended articles
Cited by

To cite this article:

Reference style: APA Chicago Harvard

Citation copied to clipboard

Reference styles above use APA (6th edition), Chicago (16th edition) & Harvard (10th edition)

Download citation

Download a citation file in RIS format that can be imported by citation management software including EndNote, ProCite, RefWorks and Reference Manager.

Choose format: RIS BibTex RefWorks Direct Export

Choose options: Citation Citation & abstract Citation & references

Numerical Prediction of Cavitation in Noncircular Journal Bearings

Articles from other publishers (34)

Information for

Open access

Opportunities

Help and information

Your download is now in progress and you may close this window

Login or register to access this feature