K.A. Habib, D.L. Cano, José Antonio Heredia & J. Serrano-Mira. (2021) Analysis of the hardness ratio effect on the tribological performance of NiCrBSi coating/debris particles using the Stribeck Curve. Wear 486-487, pages 204081.
Crossref
Zamzam Golmohammadi & Farshid Sadeghi. (2019) A Coupled Multibody Finite Element Model for Investigating Effects of Surface Defects on Rolling Contact Fatigue. Journal of Tribology 141:4.
Crossref
Tom Reddyhoff, Richard J Underwood, Richie S Sayles & Hugh A Spikes. (2018) Temperature measurement of debris particles in EHL contacts. Surface Topography: Metrology and Properties 6:3, pages 034013.
Crossref
Pierre DuPont & Steven Lampman. 2017. Friction, Lubrication, and Wear Technology. Friction, Lubrication, and Wear Technology
836
864
.
Zhou Chang, Qian Jia, Xing Yuan & Yaolong Chen. (2017) Main failure mode of oil-air lubricated rolling bearing installed in high speed machining. Tribology International 112, pages 68-74.
Crossref
Guillermo E Morales Espejel & Antonio Gabelli. (2016) Particle entrapment and indentation process in rolling bearings. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 230:12, pages 1572-1587.
Crossref
George K. Nikas. (2016) Algebraic Equations for the Pile-Up Geometry in Debris Particle Indentation of Rolling Elastohydrodynamic Contacts. Journal of Tribology 138:2.
Crossref
Xiaolan Ai & Carl Hager. (2016) Forensic Analysis of Surface Indentations in Rolling Contact. Journal of Tribology 138:1.
Crossref
George K. Nikas. (2015) Modeling Dark and White Layer Formation on Elastohydrodynamically Lubricated Steel Surfaces by Thermomechanical Indentation or Abrasion by Metallic Particles. Journal of Tribology 137:3.
Crossref
Aibin Zhu, Pei Li, Yefan Zhang, Wei Chen & Xiaoyang Yuan. (2015) Influence of particles on the loading capacity and the temperature rise of water film in Ultra-high speed hybrid bearing. Chinese Journal of Mechanical Engineering 28:3, pages 541-548.
Crossref
George K Nikas. (2013) Strain-rate effects on the plastic indentation and abrasion of elastohydrodynamic contacts by debris particles. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 228:1, pages 22-45.
Crossref
George K Nikas. (2012) Debris particle indentation and abrasion of machine-element contacts: An experimentally validated, thermoelastoplastic numerical model with micro-hardness and frictional heating effects. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 227:6, pages 579-617.
Crossref
George K Nikas. (2012) An experimentally validated numerical model of indentation and abrasion by debris particles in machine-element contacts considering micro-hardness effects. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 226:5, pages 406-438.
Crossref
M. Vrbka, I. Křupka, O. Šamánek, P. Svoboda, M. Vaverka & M. Hartl. (2010) Effect of surface texturing on lubrication film formation and rolling contact fatigue within mixed lubricated non-conformal contacts. Meccanica 46:3, pages 491-498.
Crossref
M. Vrbka, O. Šamánek, P. Šperka, T. Návrat, I. Křupka & M. Hartl. (2010) Effect of surface texturing on rolling contact fatigue within mixed lubricated non-conformal rolling/sliding contacts. Tribology International 43:8, pages 1457-1465.
Crossref
G K Nikas. (2010) A state-of-the-art review on the effects of particulate contamination and related topics in machine-element contacts. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 224:5, pages 453-479.
Crossref
J Halme & P Andersson. (2016) Rolling contact fatigue and wear fundamentals for rolling bearing diagnostics - state of the art. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 224:4, pages 377-393.
Crossref
I. Křupka, M. Vrbka & M. Hartl. (2008) Effect of surface texturing on mixed lubricated non-conformal contacts. Tribology International 41:11, pages 1063-1073.
Crossref
Eduard Antaluca & Daniel Nélias. (2008) Contact Fatigue Analysis of a Dented Surface in a Dry Elastic–Plastic Circular Point Contact. Tribology Letters 29:2, pages 139-153.
Crossref
Wei Wang, Kun Liu & Minghua Jiao. (2007) Thermal and non-Newtonian analysis on mixed liquid–solid lubrication. Tribology International 40:7, pages 1067-1074.
Crossref
G. K. Nikas. (2007) Effects of operating conditions and friction on the entrapment of spherical debris particles in elliptical contacts. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 221:6, pages 727-741.
Crossref
I Křupka, M Hartl, L Urbanec & J Čermák. (2007) Single dent within elastohydrodynamic contact - comparison between experimental and numerical results. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 221:6, pages 635-644.
Crossref
Radek Poliscuk, Michal Vaverka, Martin Vrbka, Ivan Krupka & Martin Hartl. (2006) Pressure Distribution Within EHD Point Contacts Based on Measured Film Thickness. Pressure Distribution Within EHD Point Contacts Based on Measured Film Thickness.
G. K. Nikas. (2006) A mechanistic model of spherical particle entrapment in elliptical contacts. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 220:6, pages 507-522.
Crossref
A Sasaki. (2006) Contaminants in Used Oils and Their Problems. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 220:5, pages 471-478.
Crossref
Sandrine Coulon, Fabrice Vtlle & Ton Lubrecht. 2005. Life Cycle Tribology. Life Cycle Tribology
691
702
.
Young Sup Kang, Farshid Sadeghi & Mike R. Hoeprich. (2004) A Finite Element Model for Spherical Debris Denting in Heavily Loaded Contacts. Journal of Tribology 126:1, pages 71-80.
Crossref
X Ai. (2005) Effect of debris contamination on the fatigue life of roller bearings. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 215:6, pages 563-575.
Crossref
Juha Miettinen & Peter Andersson. (2000) Acoustic emission of rolling bearings lubricated with contaminated grease. Tribology International 33:11, pages 777-787.
Crossref
Young S. Kang, Farshid Sadeghi & Xiaolan Ai. (2000) Debris Effects on EHL Contact. Journal of Tribology 122:4, pages 711-720.
Crossref
D. Ne´lias & F. Ville. (2000) Detrimental Effects of Debris Dents on Rolling Contact Fatigue. Journal of Tribology 122:1, pages 55-64.
Crossref
G. K. Nikas, E. loannides & R. S. Sayles. (1999) Thermal Modeling and Effects From Debris Particles in Sliding/Rolling EHD Line Contacts—A Possible Local Scuffing Mode. Journal of Tribology 121:2, pages 272-281.
Crossref
G. K. Nikas, R. S. Sayles & E. Ioannides. (1999) Thermoelastic Distortion of EHD Line Contacts During the Passage of Soft Debris Particles. Journal of Tribology 121:2, pages 265-271.
Crossref
G. K. Nikas, R. S. Sayles & E loannides. (2005) Effects of debris particles in sliding/rolling elastohydrodynamic contacts. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 212:5, pages 333-343.
Crossref
Fabrice Ville & Daniel Nelias. 1998. Tribology for Energy Conservation, Proceedings of the 24th Leeds-Lyon Symposium on Tribology. Tribology for Energy Conservation, Proceedings of the 24th Leeds-Lyon Symposium on Tribology
399
409
.
Gang Xu, Farshid Sadeghi & J. David Cogdell. (1997) Debris Denting Effects on Elastohydrodynamic Lubricated Contacts. Journal of Tribology 119:3, pages 579-587.
Crossref
G Xu, D A Nickel, F Sadeghi & X Ai. (2006) Elastoplastohydrodynamic Lubrication with Dent Effects. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 210:4, pages 233-245.
Crossref
Jean-Marie Georges, Denis Mazuyer, Jean-Luc Loubet & Andre Tonck. 1992. Fundamentals of Friction: Macroscopic and Microscopic Processes. Fundamentals of Friction: Macroscopic and Microscopic Processes
263
286
.
. 1991. Rheology and Elastohydrodynamic Lubrication. Rheology and Elastohydrodynamic Lubrication
341
356
.
C.N. Ko & E. loannides. 1989. Tribological Design of Machine Elements, Proceedings of the 15th Leeds-Lyon Symposium on Tribology held at Bodington Hall, The University of Leeds. Tribological Design of Machine Elements, Proceedings of the 15th Leeds-Lyon Symposium on Tribology held at Bodington Hall, The University of Leeds
199
207
.
E. loannides, B. Jacobson & J.H. Tripp. 1989. Tribological Design of Machine Elements, Proceedings of the 15th Leeds-Lyon Symposium on Tribology held at Bodington Hall, The University of Leeds. Tribological Design of Machine Elements, Proceedings of the 15th Leeds-Lyon Symposium on Tribology held at Bodington Hall, The University of Leeds
181
187
.