61
Views
28
CrossRef citations to date
0
Altmetric
Original Articles

Performance Characteristics of Cavitated Noncircular Journal Bearings in the Turbulent Flow Regime

&
Pages 35-44 | Published online: 25 Mar 2008

Keep up to date with the latest research on this topic with citation updates for this article.

Read on this site (2)

E. Rajasekhar Nicodemus & SatishC. Sharma. (2012) Performance Characteristics of Micropolar Lubricated Membrane-Compensated Worn Hybrid Journal Bearings. Tribology Transactions 55:1, pages 59-70.
Read now
Daen Wang, TheoG. Keith, Qingmin Yang & Vaidyanathan Kumar. (2004) Lubrication Analysis of a Connecting-Rod Bearing in a High-Speed Engine. Part II: Lubrication Performance Evaluation for Non-Circular Bearings. Tribology Transactions 47:2, pages 290-298.
Read now

Articles from other publishers (26)

Yunlei Wang, Jiu Hui Wu & Lushuai Xu. (2021) Influence of turbulent cavitating flow on performance characteristics of spiral groove liquid film seal. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 236:1, pages 70-79.
Crossref
Gang Liu & Ming Li. (2021) Experimental study on the lubrication characteristics of water-lubricated rubber bearings at high rotating speeds. Tribology International 157, pages 106868.
Crossref
Sandeep Soni. (2020) Turbulence effect on dynamic performance of non-circular floating ring bearing. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 235:2, pages 290-302.
Crossref
Jagjit Singh Maan & R.K. Awasthi. (2021) Effect of texture location on performance characteristics of two-lobe hydrodynamic journal bearing under turbulent regime. Materials Today: Proceedings 47, pages 5575-5583.
Crossref
Gang Liu & Ming Li. (2020) Lubrication Characteristics of Water-Lubricated Rubber Bearings With Partial Wear. Journal of Fluids Engineering 142:2.
Crossref
Mushrek A. Mahdi & Ahmed Waleed Hussein. (2019) Investigation the combined effects of wear and turbulent on the performance of hydrodynamic journal bearing operating with couple stress fluids. International Journal of Structural Integrity 10:6, pages 825-837.
Crossref
Sandeep Soni & DP Vakharia. (2016) Performance analysis of a finite noncircular floating ring bearing in turbulent flow regime. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 231:7, pages 869-888.
Crossref
Ravindra Mallya, Satish B Shenoy & Raghuvir Pai. (2016) Static characteristics of misaligned multiple axial groove water-lubricated bearing in the turbulent regime. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 231:3, pages 385-398.
Crossref
Tiago Henrique Machado & Katia L. Cavalca. (2016) Experimental validation of a bearing wear model using the directional response of the rotor-bearing system. Anais da Academia Brasileira de Ciências 88:4, pages 2401-2416.
Crossref
Tiago H. Machado & Katia L. Cavalca. (2016) Investigation on an experimental approach to evaluate a wear model for hydrodynamic cylindrical bearings. Applied Mathematical Modelling 40:21-22, pages 9546-9564.
Crossref
Boualem Chetti. (2016) The effect of turbulence on the performance of a two-lobe journal bearing lubricated with a couple stress fluid. Industrial Lubrication and Tribology 68:3, pages 336-340.
Crossref
J. K. Wang & M. M. Khonsari. 2016. Thermohydrodynamic Instability in Fluid-Film Bearings. Thermohydrodynamic Instability in Fluid-Film Bearings 91 167 .
Michael G. Papanikolaou, Michael G. Farmakopoulos & Chris A. Papadopoulos. (2015) Alternation of the dynamic coefficients of short journal bearings due to wear. International Journal of Structural Integrity 6:5, pages 649-664.
Crossref
Athanasios Chasalevris, Fadi Dohnal & Ioannis Chatzisavvas. (2014) Experimental detection of additional harmonics due to wear in journal bearings using excitation from a magnetic bearing. Tribology International 71, pages 158-167.
Crossref
Nathi Ram & Satish Sharma. (2013) A study of misaligned hole‐entry worn journal bearing operating in turbulent regime. Industrial Lubrication and Tribology 65:2, pages 108-118.
Crossref
Vikas M. Phalle, Satish C. Sharma & S.C. Jain. (2012) Performance analysis of a 2-lobe worn multirecess hybrid journal bearing system using different flow control devices. Tribology International 52, pages 101-116.
Crossref
K M Saridakis, P G Nikolakopoulos, C A Papadopoulos & A J Dentsoras. (2011) Identification of wear and misalignment on journal bearings using artificial neural networks. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 226:1, pages 46-56.
Crossref
Satish C. Sharma, Vikas M. Phalle & S.C. Jain. (2011) Influence of wear on the performance of a multirecess conical hybrid journal bearing compensated with orifice restrictor. Tribology International 44:12, pages 1754-1764.
Crossref
Vikas M. Phalle, Satish C. Sharma & S.C. Jain. (2011) Influence of wear on the performance of a 2-lobe multirecess hybrid journal bearing system compensated with membrane restrictor. Tribology International 44:4, pages 380-395.
Crossref
K.P. Gertzos, P.G. Nikolakopoulos, A.C. Chasalevris & C.A. Papadopoulos. (2011) Wear identification in rotor-bearing systems by measurements of dynamic bearing characteristics. Computers & Structures 89:1-2, pages 55-66.
Crossref
E. Rajasekhar Nicodemus & Satish C. Sharma. (2010) A Study of Worn Hybrid Journal Bearing System With Different Recess Shapes Under Turbulent Regime. Journal of Tribology 132:4.
Crossref
Satyam Shivam Gautam & Mihir Kumar Ghosh. (2010) Dynamic and Static Characteristics of Wavy Annular Seals in Turbulent Flow. Tribology Online 5:1, pages 7-18.
Crossref
Chris A. Papadopoulos, Pantelis G. Nikolakopoulos & George D. Gounaris. (2008) Identification of clearances and stability analysis for a rotor-journal bearing system. Mechanism and Machine Theory 43:4, pages 411-426.
Crossref
M. Fillon & J. Bouyer. (2004) Thermohydrodynamic analysis of a worn plain journal bearing. Tribology International 37:2, pages 129-136.
Crossref
Anjani Kumar & S.S. Mishra. (1996) Steady state analysis of noncircular worn journal bearings in nonlaminar lubrication regimes. Tribology International 29:6, pages 493-498.
Crossref
Anjani Kumar & S.S. Mishra. (1996) Stability of a rigid rotor in turbulent hydrodynamic worn journal bearings. Wear 193:1, pages 25-30.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.