Citations (23)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (5)
Amina Nemchi, Ahmed Bouzidane, Marc Thomas & Asma Abed. (2018) Performance analysis of four-pad hydrostatic squeeze film dampers loaded between pads under laminar and turbulent flow conditions. Tribology - Materials, Surfaces & Interfaces 12:2, pages 59-70.
Read now
Read now
Feng Shen, Cong-Lian Chen & Zhao-Miao Liu. (2014) Effect of Pocket Geometry on the Performance of a Circular Thrust Pad Hydrostatic Bearing in Machine Tools. Tribology Transactions 57:4, pages 700-714.
Read now
Read now
Lin Wang, Shiyuan Pei, Xianzhi Xiong & Hua Xu. (2014) Study on the Static Performance and Stability of a Water-Lubricated Hybrid Bearing with Circumferential Grooves and Stepped Recesses Considering the Influence of Recess Sizes. Tribology Transactions 57:1, pages 36-45.
Read now
Read now
Roberto Bassani. (2013) Hydrostatic Self-Regulating Multipad Journal and Integral Bearings. Tribology Transactions 56:2, pages 187-195.
Read now
Read now
Ahmed Bouzidane & Marc Thomas. (2007) Equivalent Stiffness and Damping Investigation of a Hydrostatic Journal Bearing. Tribology Transactions 50:2, pages 257-267.
Read now
Read now
Articles from other publishers (18)
Hidetoshi Ueda, Mitsuhiro Saito, Yusuke Kawamura, Shouhei Kawada & Masaaki Miyatake. (2024) Study on static and dynamic characteristics of water-lubricated hydrostatic thrust bearings – Effect of feed hole inlet shape on bearing characteristics. Tribology International 191, pages 109127.
Crossref
Crossref
Jiawei Wang, Jiuqi Huang, Sen Jiang, Ange Nsilani Kouediatouka, Qi Liu & Guangneng Dong. (2023) Analysis of maximum radial load capacity of hydrostatic journal bearing considering supply pressure limitation by a novel method. Tribology International 184, pages 108484.
Crossref
Crossref
Michal Michalec, Martin Ondra, Martin Svoboda, Jiří Chmelík, Petr Zeman, Petr Svoboda & Robert L. Jackson. (2023) A Novel Geometry Optimization Approach for Multi-Recess Hydrostatic Bearing Pad Operating in Static and low-Speed Conditions Using CFD Simulation. Tribology Letters 71:2.
Crossref
Crossref
Jiawei Wang, Sen Jiang, Jiuqi Huang, Wencai Xiong, Jingwei Hu, Zhaozhe Meng, Ange Nsilani Kouediatouka & Guangneng Dong. (2023) Simplified calculation of recess pressure considering the hydrodynamic effect. Journal of Tribology, pages 1-17.
Crossref
Crossref
Xinglong Chen, James K Mills, Kai Shi & Gang Bao. (2020) Numerical investigation on the static performance of aerostatic journal bearings with different pocket shapes by the finite-element method. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 235:9, pages 1897-1911.
Crossref
Crossref
Michal Michalec, Petr Svoboda, Ivan Křupka & Martin Hartl. (2021) A review of the design and optimization of large-scale hydrostatic bearing systems. Engineering Science and Technology, an International Journal 24:4, pages 936-958.
Crossref
Crossref
Le Zhang, Qi Xin, Bo Wu, Ning Zhong, Liyue Tu & Hulin Li. (2020) Study on the capacity performance of journal bearings with different spiral groove structures by CFD method. IOP Conference Series: Materials Science and Engineering 999:1, pages 012015.
Crossref
Crossref
Gen Fu & Alexandrina Untaroiu. (2017) A Study of the Effect of Various Recess Shapes on Hybrid Journal Bearing Performance Using Computational Fluid Dynamics and Response Surface Method. Journal of Fluids Engineering 139:6.
Crossref
Crossref
Faiza Ghezali, A. Bouzidane & M. Thomas. (2016) 3D Numerical investigation of pressure field of an orifice compensated hydrostatic bearing. Mechanics & Industry 18:1, pages 101.
Crossref
Crossref
Cho-Yun Yang, Cho-Yu Yang, Cheng-Kuo Sung & Chih-Yung Huang. (2014) Design of Slip Boundary Produced by a Lotus Structure Applied to a Hydrostatic Bearing. Tribology Letters 55:1, pages 55-64.
Crossref
Crossref
Feng Shen, Cong-Lian Chen & Zhao-Miao Liu. (2013) Three-dimensional pressure- and shear-driven flow phenomena in a circular recess of a hydrostatic rotary table. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 228:6, pages 989-1004.
Crossref
Crossref
Arvind K Rajput & Satish C Sharma. (2013) A study of capillary-compensated geometrically imperfect six-pocket hybrid journal bearing of various geometric shapes of recess. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 228:2, pages 170-186.
Crossref
Crossref
Vijay Kumar Dwivedi, Satish Chand & K.N. Pandey. (2013) Analysis of Hybrid (Hydrodynamic/Hydrostatic) Journal Bearing. Advanced Materials Research 650, pages 385-390.
Crossref
Crossref
E. Rajasekhar Nicodemus & Satish C. Sharma. (2011) Orifice compensated multirecess hydrostatic/hybrid journal bearing system of various geometric shapes of recess operating with micropolar lubricant. Tribology International 44:3, pages 284-296.
Crossref
Crossref
E. Rajasekhar Nicodemus & Satish C. Sharma. (2010) A Study of Worn Hybrid Journal Bearing System With Different Recess Shapes Under Turbulent Regime. Journal of Tribology 132:4.
Crossref
Crossref
Ilmar Ferreira Santos & Fla´vio Yukio Watanabe. (2004) Compensation of Cross-Coupling Stiffness and Increase of Direct Damping in Multirecess Journal Bearings Using Active Hybrid Lubrication: Part I—Theory. Journal of Tribology 126:1, pages 146-155.
Crossref
Crossref
Narendra Singh, Satish C. Sharma, S.C. Jain & S. Sanjeeva Reddy. (2004) Performance of membrane compensated multirecess hydrostatic/hybrid flexible journal bearing system considering various recess shapes. Tribology International 37:1, pages 11-24.
Crossref
Crossref
Satish C. Sharma, S.C. Jain & D.K. Bharuka. (2002) Influence of recess shape on the performance of a capillary compensated circular thrust pad hydrostatic bearing. Tribology International 35:6, pages 347-356.
Crossref
Crossref