Advanced search
Publication Cover
Tribology Transactions Volume 42, 1999 - Issue 2
Submit an article Journal homepage
685
Views
98
CrossRef citations to date
0
Altmetric
Original Articles

Tool Life and Surface Integrity When Machining Inconel 718 With PVD- and CVD-Coated Tools

E. O. Ezugwu South Bank University, Machining Research Center, School of Engineering Systems and Design, London, SE1 OAA, England
,
Z. M. Wang South Bank University, Machining Research Center, School of Engineering Systems and Design, London, SE1 OAA, England
&
C. I. Okeke South Bank University, Machining Research Center, School of Engineering Systems and Design, London, SE1 OAA, England
Pages 353-360 | Published online: 25 Mar 2008

Citations (98)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (13)

Anish Nair, Somasundaram Kumanan, Chander Prakash, Dhanesh G. Mohan, Kuldeep Kumar Saxena, Sandeep Kumar & Gaurav Kumar. (2023) Research developments and technological advancements in conventional and non-conventional machining of superalloys – a review. Journal of Adhesion Science and Technology 37:22, pages 3053-3124.
Read now
A. Shailesh Rao. (2023) Effect of nose radius on the chip morphology, cutting force and tool wear during dry turning of Inconel 718. Tribology - Materials, Surfaces & Interfaces 17:1, pages 62-71.
Read now
Kore Mahesh, Jibin T Philip, S N Joshi & Basil Kuriachen. (2021) Machinability of Inconel 718: A critical review on the impact of cutting temperatures. Materials and Manufacturing Processes 36:7, pages 753-791.
Read now
Thrinadh Jadam, Saurav Datta & Manoj Masanta. (2021) Influence of cutting tool material on machinability of Inconel 718 superalloy. Machining Science and Technology 25:3, pages 349-397.
Read now
Niharika Swain, Praveen Kumar, G. Srinivas, S. Ravishankar & Harish C. Barshilia. (2017) Mechanical micro-drilling of nimonic 80A superalloy using uncoated and TiAlN-coated micro-drills. Materials and Manufacturing Processes 32:13, pages 1537-1546.
Read now
A. Thakur, S. Gangopadhyay, K. P. Maity & S. K. Sahoo. (2016) Evaluation on Effectiveness of CVD and PVD Coated Tools during Dry Machining of Incoloy 825. Tribology Transactions 59:6, pages 1048-1058.
Read now
Hamed Hassanpour, Mohammad H. Sadeghi, Hamed Rezaei & Amir Rasti. (2016) Experimental Study of Cutting Force, Microhardness, Surface Roughness, and Burr Size on Micromilling of Ti6Al4V in Minimum Quantity Lubrication. Materials and Manufacturing Processes 31:13, pages 1654-1662.
Read now
A. Mohanty, S. Gangopadhyay & A. Thakur. (2016) On Applicability of Multilayer Coated Tool in Dry Machining of Aerospace Grade Stainless Steel. Materials and Manufacturing Processes 31:7, pages 869-879.
Read now
Waseem Akhtar, Jianfei Sun & Wuyi Chen. (2016) Effect of Machining Parameters on Surface Integrity in High Speed Milling of Super Alloy GH4169/Inconel 718. Materials and Manufacturing Processes 31:5, pages 620-627.
Read now
A. Thakur, S. Gangopadhyay & K. P. Maity. (2014) Effect of cutting speed and CVD multilayer coating on machinability of Inconel 825. Surface Engineering 30:7, pages 516-523.
Read now
ErweenA. Rahim & Hiroyuki Sasahara. (2011) AN ANALYSIS OF SURFACE INTEGRITY WHEN DRILLING INCONEL 718 USING PALM OIL AND SYNTHETIC ESTER UNDER MQL CONDITION. Machining Science and Technology 15:1, pages 76-90.
Read now
A. R. C. Sharman, J. I. Hughes & K. Ridgway. (2004) Workpiece Surface Integrity and Tool Life Issues When Turning Inconel 718™ Nickel Based Superalloy. Machining Science and Technology 8:3, pages 399-414.
Read now
E.O. Ezugwu & C.I. Okeke. (2000) Performance of PVD Coated Carbide Inserts When Machining a Nimonic (C-263) Alloy at High Speed Conditions. Tribology Transactions 43:2, pages 332-336.
Read now

Articles from other publishers (85)

Oskar Zemčík, Karel Kouřil, Martin Slaný, Jan Zouhar, Josef Sedlák & Štěpán Kolomý. (2023) Machinability of UMCo50 Cobalt Superalloy. Manufacturing Technology.
Crossref
Xiaoming Yin, Shenliang Yang, Xun Li & Deyuan Zhang. (2023) Research on surface integrity of Inconel 718 with various ultrasonic ball-end milling times. The International Journal of Advanced Manufacturing Technology 128:5-6, pages 2187-2197.
Crossref
Tiyamike Banda, Veronica Lestari Jauw, Ali Akhavan Farid, Ng Hao Wen, Kevin Choi Wei Xuan & Chin Seong Lim. (2023) In-process detection of failure modes using YOLOv3-based on-machine vision system in face milling Inconel 718. The International Journal of Advanced Manufacturing Technology.
Crossref
Dan Wang, Xiyu Chen, Xunqing Lai, Guolong Zhao & Yinfei Yang. (2023) Effect of Cutting Surface Integrity on Fatigue Properties of TC17 Titanium Alloy. Materials 16:16, pages 5658.
Crossref
Weiwei Yu, Weiwei Ming, Qinglong An & Ming Chen. (2023) Wear behavior of SiAlON ceramic tool and its effects during high-speed cutting. Ceramics International 49:16, pages 26694-26706.
Crossref
Monica C.R. Guimaraes, João B. Fogagnolo, Jose M. Paiva, Stephen Veldhuis & Anselmo E. Diniz. (2023) The impact of the cutting parameters and tool condition on surface integrity when milling Inconel 625. Journal of Materials Research and Technology 25, pages 1944-1958.
Crossref
Henry Boyle, Susanne Norgren, Pete Crawforth, Katerina Christofidou, Denis Boing & Martin Jackson. (2023) Insights in α-Al2O3 degradation in multilayer CVD coated carbide tools when turning IN718. Wear 523, pages 204786.
Crossref
Pratik Ashokrao Patil, Sachin K Patil & Mayur S Sawant. (2023) Assessment of surface integrity and hole quality in graphene-based NMQL Micro-drilling of ceramic-coated Nimonic 90 for gas turbine applications. Engineering Research Express 5:1, pages 015031.
Crossref
Soumikh Roy, Ramanuj Kumar, Ashutosh Satpathy & Ashok Kumar Sahoo. (2023) Current status of various coolant applications in machining of nickel-base superalloys. Materials Today: Proceedings 78, pages 535-542.
Crossref
Mohit Rana, Talvinder Singh, Vijay Kumar Sharma, Kamaljeet Singh & Pallavi Aggarwal. 2023. Emerging Trends in Mechanical and Industrial Engineering. Emerging Trends in Mechanical and Industrial Engineering 663 675 .
Abdul Rahman Vassouf, Mahir Akgün & Mehmet Akif Erden. (2022) Evaluation of the mechanical properties and machinability of chromium and molybdenum-added powder metallurgy steels. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, pages 095440892211454.
Crossref
Saurabh Shah, Anand Joshi, Kamlesh Chauhan, Ankit Oza, Chander Prakash, Raul Duarte Salgueiral Gomes Campilho & Sandeep Kumar. (2022) Feasibility Analysis of Machining Cobalt-Chromium Alloy (Stellite-6) Using TiN Coated Binary Inserts. Materials 15:20, pages 7294.
Crossref
Fırat KAFKAS, Hüseyin GÜRBÜZ & Ulvi ŞEKER. (2022) AISI 316L Paslanmaz Çeliğin Tornalanmasında Takım Geometrisi ve İşleme Parametrelerinin Yüzey Bütünlüğü Özelliklerine Etkisinin Taguchi Yöntemi ile AnaliziAnalysis of The Effect of Tool Geometry and Machining Parameters on Surface Integrity Properties in Turning of AISI 316L Stainless Steel by Taguchi Method. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji 10:3, pages 391-407.
Crossref
Monica C.R. Guimaraes, João B. Fogagnolo, Jose M. Paiva, Stephen C. Veldhuis & Anselmo E. Diniz. (2022) Evaluation of milling parameters on the surface integrity of welded inconel 625. Journal of Materials Research and Technology 20, pages 2611-2628.
Crossref
Meltem Altin Karataş. (2022) Wire EDM cutting of Inconel 718 nickel-based superalloy: kerf and MRR analysis. Multidiscipline Modeling in Materials and Structures 18:4, pages 653-672.
Crossref
Prabhat Chand Yadav, Prince Setia & Sandeep Sahu. (2022) Micro-scratching behavior of heat-treated cutting chips of Inconel 718. Materials Today Communications 32, pages 104007.
Crossref
Runyu Zhang, Kishore Mysore Nagaraja, Ning Bian, Ethan Fisher, Samir Ahmadyar, Kaya Bayazitoglu, Hongbing Lu & Wei Li. (2022) Experimental studies on fabricating functionally gradient material of stainless steel 316L-Inconel 718 through hybrid manufacturing: directed energy deposition and machining. The International Journal of Advanced Manufacturing Technology 120:11-12, pages 7815-7826.
Crossref
Liang Tan, Changfeng Yao, Xiangyu Li, Yi Fan & Minchao Cui. (2022) Effects of Machining Parameters on Surface Integrity when Turning Inconel 718. Journal of Materials Engineering and Performance 31:5, pages 4176-4186.
Crossref
Nurul Hayati Abdul Halim, Che Hassan Che Haron & Jaharah Abdul Ghani. (2022) PVD multi-coated carbide milling inserts performance: Comparison between cryogenic and dry cutting conditions. Journal of Manufacturing Processes 73, pages 895-902.
Crossref
Uma Maheshwera Reddy Paturi, Vidhya Darshini B.N.S. Reddy. (2021) Progress of machinability on the machining of Inconel 718: A comprehensive review on the perception of cleaner machining. Cleaner Engineering and Technology 5, pages 100323.
Crossref
Andrea De Bartolomeis, Stephen T. Newman, I.S. Jawahir, Dirk Biermann & Alborz Shokrani. (2021) Future research directions in the machining of Inconel 718. Journal of Materials Processing Technology 297, pages 117260.
Crossref
Irfan Ullah, Song Zhang, Qing Zhang & Renwei Wang. (2021) Numerical investigation on serrated chip formation during high-speed milling of Ti-6Al-4V alloy. Journal of Manufacturing Processes 71, pages 589-603.
Crossref
Murat Sarıkaya, Munish Kumar Gupta, Italo Tomaz, Danil Yu Pimenov, Mustafa Kuntoğlu, Navneet Khanna, Çağrı Vakkas Yıldırım & Grzegorz M. Krolczyk. (2021) A state-of-the-art review on tool wear and surface integrity characteristics in machining of superalloys. CIRP Journal of Manufacturing Science and Technology 35, pages 624-658.
Crossref
Liang Tan, Changfeng Yao, Dinghua Zhang, Minchao Cui & Xuehong Shen. (2021) Effects of tool wear on machined surface integrity during milling of Inconel 718. The International Journal of Advanced Manufacturing Technology 116:7-8, pages 2497-2509.
Crossref
Irfan Ullah, Song Zhang, Qing Zhang & BinXun Li. (2021) Microstructural and mechanical property investigation of machined surface layer in high-speed milling of Ti-6Al-4V alloy. The International Journal of Advanced Manufacturing Technology 116:5-6, pages 1707-1719.
Crossref
Anton Seleznev, Nestor Washington Solis Pinargote & Anton Smirnov. (2021) Ceramic Cutting Materials and Tools Suitable for Machining High-Temperature Nickel-Based Alloys: A Review. Metals 11:9, pages 1385.
Crossref
Zhenlong Peng, Xiangyu Zhang & Deyuan Zhang. (2021) Performance evaluation of high-speed ultrasonic vibration cutting for improving machinability of Inconel 718 with coated carbide tools. Tribology International 155, pages 106766.
Crossref
Gowtham Kumarasamy, Poovazhagan Lakshmanan & Geethapriyan Thangamani. (2020) Electrochemical Micromachining of Hastelloy C276 by Different Electrolyte Solutions. Arabian Journal for Science and Engineering 46:3, pages 2243-2259.
Crossref
Omid Kalantari, Farshid Jafarian & Mohammad Meghdad Fallah. (2021) Comparative investigation of surface integrity in laser assisted and conventional machining of Ti-6Al-4 V alloy. Journal of Manufacturing Processes 62, pages 90-98.
Crossref
Abhinav Shard, Deepshikha, Vishal Gupta & M P Garg. (2021) The Comprehensive Review on machining of Inconel 718 superalloy. IOP Conference Series: Materials Science and Engineering 1033:1, pages 012069.
Crossref
R. Thirumalai, M. Seenivasan & K. Panneerselvam. (2021) Experimental investigation and multi response optimization of turning process parameters for Inconel 718 using TOPSIS approach. Materials Today: Proceedings 45, pages 467-472.
Crossref
Joanna Lisowicz, Witold Habrat, Krzysztof Krupa & Mateusz Fiedeń. 2021. Advances in Manufacturing Engineering and Materials II. Advances in Manufacturing Engineering and Materials II 226 235 .
Wei Fan, Wei Ji, Lihui Wang, Lianyu Zheng & Yahui Wang. (2020) A review on cutting tool technology in machining of Ni-based superalloys. The International Journal of Advanced Manufacturing Technology 110:11-12, pages 2863-2879.
Crossref
Muhammad Qaiser Saleem & Salman Mumtaz. (2020) Face milling of Inconel 625 via wiper inserts: Evaluation of tool life and workpiece surface integrity. Journal of Manufacturing Processes 56, pages 322-336.
Crossref
Xing Dai, Kejia Zhuang, Donglin Pu, Weiwei Zhang & Han Ding. (2020) An Investigation of the Work Hardening Behavior in Interrupted Cutting Inconel 718 under Cryogenic Conditions. Materials 13:9, pages 2202.
Crossref
Hüseyin GÜRBÜZ, Ulvi ŞEKER & Fırat KAFKAS. (2019) AISI 316L çeliğinin tornalanmasında kesici takım formlarının yüzey bütünlüğü üzerine etkisi. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi 35:1, pages 225-240.
Crossref
Merugu Rakesh & Saurav Datta. (2019) Effects of Cutting Speed on Chip Characteristics and Tool Wear Mechanisms During Dry Machining of Inconel 718 Using Uncoated WC Tool. Arabian Journal for Science and Engineering 44:9, pages 7423-7440.
Crossref
Hamid Javadi, Walid Jomaa, Victor Songmene, Myriam Brochu & Philippe Bocher. (2019) Inconel 718 Superalloy Controlled Surface Integrity for Fatigue Applications Produced by Precision Turning. International Journal of Precision Engineering and Manufacturing 20:8, pages 1297-1310.
Crossref
Sathish Kannan & Liu Kui. (2019) Experimental investigation of surface integrity during abrasive edge profiling of nickel-based alloy. Journal of Manufacturing Processes 39, pages 40-51.
Crossref
Eren Kaya & İrfan Kaya. (2018) A review on machining of NiTi shape memory alloys: the process and post process perspective. The International Journal of Advanced Manufacturing Technology 100:5-8, pages 2045-2087.
Crossref
Zhe Chen, Ru Lin Peng, Jinming Zhou, Rachid M’Saoubi, David Gustafsson & Johan Moverare. (2018) Effect of machining parameters on cutting force and surface integrity when high-speed turning AD 730™ with PCBN tools. The International Journal of Advanced Manufacturing Technology 100:9-12, pages 2601-2615.
Crossref
Fahd N Khan, Julfikar Haider & Martin Persson. (2017) Investigating tool performance and wear when simulating bandsawing of nickel-based superalloy under interrupted orthogonal turning condition. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 233:2, pages 515-526.
Crossref
Xiaoliang Liang, Zhanqiang Liu & Bing Wang. (2019) State-of-the-art of surface integrity induced by tool wear effects in machining process of titanium and nickel alloys: A review. Measurement 132, pages 150-181.
Crossref
S.S. Sarnobat & H.K. Raval. (2019) Experimental investigation and analysis of the influence of tool edge geometry and work piece hardness on surface residual stresses, surface roughness and work-hardening in hard turning of AISI D2 steel. Measurement 131, pages 235-260.
Crossref
Merugu Rakesh, Saurav Datta & Siba Sankar Mahapatra. (2019) Effects of Depth of Cut during Machining of Inconel 718 using Uncoated WC Tool. Materials Today: Proceedings 18, pages 3667-3675.
Crossref
Bing Wang & Zhanqiang Liu. (2018) Influences of tool structure, tool material and tool wear on machined surface integrity during turning and milling of titanium and nickel alloys: a review. The International Journal of Advanced Manufacturing Technology 98:5-8, pages 1925-1975.
Crossref
Marek Vrabeľ, Martin Eckstein & Ildikó Maňková. (2018) Analysis of the metallography parameters and residual stress induced when producing bolt holes in Inconel 718 alloy. The International Journal of Advanced Manufacturing Technology 96:9-12, pages 4353-4366.
Crossref
Hamid Javadi, Walid Jomaa, Elvi Dalgaard, Myriam Brochu & Philippe Bocher. (2018) Influence of surface residual stresses on the fatigue life and crack propagation behavior of turned Inconel 718 super-alloy. MATEC Web of Conferences 165, pages 18004.
Crossref
Muhammed A. Sadiq, Nghi M. Hoang, Nicholas Valencia, Suleiman Obeidat & Wayne N.P. Hung. (2018) Experimental study of micromilling selective laser melted Inconel 718 superalloy. Procedia Manufacturing 26, pages 983-992.
Crossref
Soumikh Roy, Ramanuj Kumar, Anurag, Amlana Panda & Rabin Kumar Das. (2018) A Brief Review on Machining of Inconel 718. Materials Today: Proceedings 5:9, pages 18664-18673.
Crossref
Eren Kaya & Birol Akyüz. (2017) Effects of cutting parameters on machinability characteristics of Ni-based superalloys: a review. Open Engineering 7:1, pages 330-342.
Crossref
Isha Srivastava & Ajay Batish. (2017) Performance Evaluation of PVD and CVD Coated Inserts during End Milling with DRY and MQL Condition. Applied Mechanics and Materials 867, pages 165-170.
Crossref
Hüseyin Gürbüz, Ulvi Şeker & Fırat Kafkas. (2016) Investigation of effects of cutting insert rake face forms on surface integrity. The International Journal of Advanced Manufacturing Technology 90:9-12, pages 3507-3522.
Crossref
A. Thakur & S. Gangopadhyay. (2016) Influence of tribological properties on the performance of uncoated, CVD and PVD coated tools in machining of Incoloy 825. Tribology International 102, pages 198-212.
Crossref
Xiaoping Ren & Zhanqiang Liu. (2016) Influence of cutting parameters on work hardening behavior of surface layer during turning superalloy Inconel 718. The International Journal of Advanced Manufacturing Technology 86:5-8, pages 2319-2327.
Crossref
Z. Chen, R. Lin Peng, J. Moverare, P. Avdovic, J. M. Zhou & S. Johansson. (2016) Surface Integrity and Structural Stability of Broached Inconel 718 at High Temperatures. Metallurgical and Materials Transactions A 47:7, pages 3664-3676.
Crossref
A. Thakur & S. Gangopadhyay. (2016) State-of-the-art in surface integrity in machining of nickel-based super alloys. International Journal of Machine Tools and Manufacture 100, pages 25-54.
Crossref
M.R. Nurul Fatin, A.B. Mohd Hadzley, Raja Abdullah Raja Izamshah & M.A. Amrand. (2015) An Experimental Study of Wear Mechanism on High Speed Machining of FC300 Gray Cast Iron Using TiAlN Coated Carbide Cutting Tool. Applied Mechanics and Materials 761, pages 257-261.
Crossref
Mohsen Marani Barzani, Erfan Zalnezhad, Ahmed A.D. Sarhan, Saeed Farahany & Singh Ramesh. (2015) Fuzzy logic based model for predicting surface roughness of machined Al–Si–Cu–Fe die casting alloy using different additives-turning. Measurement 61, pages 150-161.
Crossref
Kejia Zhuang, Xiaoming Zhang & Han Ding. 2015. Intelligent Robotics and Applications. Intelligent Robotics and Applications 651 663 .
A. Thakur, A. Mohanty & S. Gangopadhyay. (2014) Comparative study of surface integrity aspects of Incoloy 825 during machining with uncoated and CVD multilayer coated inserts. Applied Surface Science 320, pages 829-837.
Crossref
Kejia Zhuang, Dahu Zhu, Xiaoming Zhang & Han Ding. (2014) Notch wear prediction model in turning of Inconel 718 with ceramic tools considering the influence of work hardened layer. Wear 313:1-2, pages 63-74.
Crossref
Turgay Kıvak. (2014) Optimization of surface roughness and flank wear using the Taguchi method in milling of Hadfield steel with PVD and CVD coated inserts. Measurement 50, pages 19-28.
Crossref
A. Madariaga, J. A. Esnaola, E. Fernandez, P. J. Arrazola, A. Garay & F. Morel. (2014) Analysis of residual stress and work-hardened profiles on Inconel 718 when face turning with large-nose radius tools. The International Journal of Advanced Manufacturing Technology 71:9-12, pages 1587-1598.
Crossref
Ali Hosseini, Hossam A. Kishawy & Hussein M. Hussein. 2014. Machinability of Advanced Materials. Machinability of Advanced Materials 95 118 .
Muhammad Imran, Paul T. Mativenga, Ali Gholinia & Philip J. Withers. (2014) Comparison of tool wear mechanisms and surface integrity for dry and wet micro-drilling of nickel-base superalloys. International Journal of Machine Tools and Manufacture 76, pages 49-60.
Crossref
R. Thirumalai & J. S. Senthilkumaar. (2013) Multi-criteria decision making in the selection of machining parameters for Inconel 718. Journal of Mechanical Science and Technology 27:4, pages 1109-1116.
Crossref
İrfan Ucun, Kubilay Aslantas & Fevzi Bedir. (2013) An experimental investigation of the effect of coating material on tool wear in micro milling of Inconel 718 super alloy. Wear 300:1-2, pages 8-19.
Crossref
Muhammad Imran, Paul T. Mativenga & Philip J. Withers. (2011) Assessment of machining performance using the wear map approach in micro-drilling. The International Journal of Advanced Manufacturing Technology 59:1-4, pages 119-126.
Crossref
Zhan Qiang Liu, Cheng Ming Cao, J. Du & Zhen Yu Shi. (2011) Effect of Cutting Speed on Surface Integrity in High Speed Machining Nickel-Based Superalloy Inconel 718. Materials Science Forum 697-698, pages 208-212.
Crossref
Muhammad Imran, Paul T. Mativenga, Ali Gholinia & Philip J. Withers. (2010) Evaluation of surface integrity in micro drilling process for nickel-based superalloy. The International Journal of Advanced Manufacturing Technology 55:5-8, pages 465-476.
Crossref
Durul Ulutan & Tugrul Ozel. (2011) Machining induced surface integrity in titanium and nickel alloys: A review. International Journal of Machine Tools and Manufacture 51:3, pages 250-280.
Crossref
Abhay Bhatt, Helmi Attia, R. Vargas & V. Thomson. (2010) Wear mechanisms of WC coated and uncoated tools in finish turning of Inconel 718. Tribology International 43:5-6, pages 1113-1121.
Crossref
M Imran, P T Mativenga, S Kannan & D Novovic. (2008) An experimental investigation of deep-hole microdrilling capability for a nickel-based superalloy. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 222:12, pages 1589-1596.
Crossref
Iulian Marinescu & Dragos A. Axinte. (2008) A critical analysis of effectiveness of acoustic emission signals to detect tool and workpiece malfunctions in milling operations. International Journal of Machine Tools and Manufacture 48:10, pages 1148-1160.
Crossref
A R C Sharman, J I Hughes & K Ridgway. (2008) Surface integrity and tool life when turning Inconel 718 using ultra-high pressure and flood coolant systems. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 222:6, pages 653-664.
Crossref
Y.S. Liao, H.M. Lin & J.H. Wang. (2008) Behaviors of end milling Inconel 718 superalloy by cemented carbide tools. Journal of Materials Processing Technology 201:1-3, pages 460-465.
Crossref
A.R.C. Sharman, A. Amarasinghe & K. Ridgway. (2008) Tool life and surface integrity aspects when drilling and hole making in Inconel 718. Journal of Materials Processing Technology 200:1-3, pages 424-432.
Crossref
R.S. Pawade, Suhas S. Joshi & P.K. Brahmankar. (2008) Effect of machining parameters and cutting edge geometry on surface integrity of high-speed turned Inconel 718. International Journal of Machine Tools and Manufacture 48:1, pages 15-28.
Crossref
H.R. Krain, A.R.C. Sharman & K. Ridgway. (2007) Optimisation of tool life and productivity when end milling Inconel 718TM. Journal of Materials Processing Technology 189:1-3, pages 153-161.
Crossref
A.R.C. Sharman, J.I. Hughes & K. Ridgway. (2006) An analysis of the residual stresses generated in Inconel 718™ when turning. Journal of Materials Processing Technology 173:3, pages 359-367.
Crossref
Erween Abd. RAHIM & Safian SHARIF. (2006) Investigation on Tool Life and Surface Integrity when Drilling Ti-6Al-4V and Ti-5Al-4V-Mo/Fe. JSME International Journal Series C 49:2, pages 340-345.
Crossref
R.M. Arunachalam, M.A. Mannan & A.C. Spowage. (2004) Surface integrity when machining age hardened Inconel 718 with coated carbide cutting tools. International Journal of Machine Tools and Manufacture 44:14, pages 1481-1491.
Crossref
E.O Ezugwu, J Bonney & Y Yamane. (2003) An overview of the machinability of aeroengine alloys. Journal of Materials Processing Technology 134:2, pages 233-253.
Crossref
C Ducros, V Benevent & F Sanchette. (2003) Deposition, characterization and machining performance of multilayer PVD coatings on cemented carbide cutting tools. Surface and Coatings Technology 163-164, pages 681-688.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.