Citations (47)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (10)
Jeya Jeevahan, R. B. Durai Raj, G. Mageshwaran, V. Sriram, G. Britto Joseph & A. Poovannan. (2019) Design and analysis of internal cooling passage of gas turbine using computational fluid dynamics. International Journal of Ambient Energy 40:1, pages 105-109.
Read now
Read now
Han-Sol Jeong & Kwang-Yong Kim. (2018) Shape optimization of a feedback-channel fluidic oscillator. Engineering Applications of Computational Fluid Mechanics 12:1, pages 169-181.
Read now
Read now
Sun-Min Kim & Kwang-Yong Kim. (2016) Microcooling system with impinging jets and a stalactite structure. Numerical Heat Transfer, Part A: Applications 69:12, pages 1376-1389.
Read now
Read now
Gongnan Xie, Yidan Song & Bengt Sundén. (2016) Computational optimization of the internal cooling passages of a guide vane by a gradient-based algorithm. Numerical Heat Transfer, Part A: Applications 69:12, pages 1311-1331.
Read now
Read now
Tao Zhang & Defu Che. (2016) Numerical investigation on heat transfer of supercritical water in a roughened tube. Numerical Heat Transfer, Part A: Applications 69:6, pages 558-573.
Read now
Read now
Tien-Mo Shih, Martinus Arie & Derrick Ko. (2011) Literature Survey of Numerical Heat Transfer (2000–2009): Part II. Numerical Heat Transfer, Part A: Applications 60:11-12, pages 883-1096.
Read now
Read now
Gongnan Xie, Bengt Sundén, Lieke Wang & Esa Utriainen. (2009) Enhanced Internal Heat Transfer on the Tip-Wall in a Rectangular Two-Pass Channel (AR = 1:2) by Pin-Fin Arrays. Numerical Heat Transfer, Part A: Applications 55:8, pages 739-761.
Read now
Read now
Murali Venkatraman, Sirivatch Shimpalee & J. W. Van Zee. (2009) Effect of Net Geometry on the Nusselt Number Distribution for Channel Flow. Numerical Heat Transfer, Part A: Applications 55:4, pages 309-336.
Read now
Read now
Ping Li & Kwang-Yong Kim. (2008) Multiobjective Optimization of Staggered Elliptical Pin-Fin Arrays. Numerical Heat Transfer, Part A: Applications 53:4, pages 418-431.
Read now
Read now
Chin-Hsiang Cheng, Chi-Kang Chan & Guang-Jer Lai. (2008) Design for Wall Shape Profile of a Millimeter-Scale Air-Heating Channel by Integrating Three-Dimensional CFD Code with Optimization Method. Numerical Heat Transfer, Part A: Applications 53:9, pages 982-1000.
Read now
Read now
Articles from other publishers (37)
Marta Żyłka, Natalia Marszałek & Wojciech Żyłka. (2023) Numerical simulation of pneumatic throttle check valve using computational fluid dynamics (CFD). Scientific Reports 13:1.
Crossref
Crossref
Guohua ZHANG, Rui ZHU, Gongnan XIE, Shulei LI & Bengt SUNDÉN. (2022) Optimization of cooling structures in gas turbines: A review. Chinese Journal of Aeronautics 35:6, pages 18-46.
Crossref
Crossref
Lei Xi, Liang Xu, Jianmin Gao, Zhen Zhao & Yunlong Li. (2021) Numerical analysis and optimization on flow and heat transfer performance of a steam-cooled ribbed channel. Case Studies in Thermal Engineering 28, pages 101442.
Crossref
Crossref
M. Černák, M. Michalec, M. Valena & M. Ranuša. (2021) Inlet shape optimization of pneumobile engine pneumatic cylinder using CFD analysis. Journal of Physics: Conference Series 1935:1, pages 012011.
Crossref
Crossref
Sirine Chtourou, Hassene Djemel, Mohamed Kaffel & Mounir Baccar. (2021) Predicting the effect of the rib pitch on thermal performance factor of small channels plate heat exchangers fitted with Y and C shapes obstacles. SN Applied Sciences 3:4.
Crossref
Crossref
Xin Li, Gongnan Xie, Jian Liu & Bengt Sunden. (2020) Parametric study on flow characteristics and heat transfer in rectangular channels with strip slits in ribs on one wall. International Journal of Heat and Mass Transfer 149, pages 118396.
Crossref
Crossref
BABU PALLI SYAM, SRIMATHULA SRIKANTH, B. S. V. RAMA RAO & YUVARAJ MANDA AKHIL. (2020) NUMERICAL SIMULATION FOR HEAT SWAPPING
BEHAVIOR ON VARIOUS PIPE GEOMETRIES. i-manager's Journal on Mechanical Engineering 10:3, pages 38.
Crossref
Crossref
Manda Akhil Yuvaraj & Geeri Satish. (2020) Comparative study of different pipe geometries using CFD. Materials Today: Proceedings 33, pages 5384-5391.
Crossref
Crossref
Ping He, Charles A. Mader, Joaquim R.R.A. Martins & Kevin J. Maki. (2019) Aerothermal optimization of a ribbed U-bend cooling channel using the adjoint method. International Journal of Heat and Mass Transfer 140, pages 152-172.
Crossref
Crossref
Narasimha R. Nagaiah & Christopher D. Geiger. (2019) Application of evolutionary algorithms to optimize cooling channels. International Journal for Simulation and Multidisciplinary Design Optimization 10, pages A4.
Crossref
Crossref
Ping He, Charles A. Mader, Joaquim R. R. A. Martins & Kevin Maki. (2018) Aerothermal Optimization of Internal Cooling Passages Using a Discrete Adjoint Method. Aerothermal Optimization of Internal Cooling Passages Using a Discrete Adjoint Method.
Mohammad Darvish Damavandi, Hamed Safikhani & Mojtaba Yahyaabadi. (2016) Multi-objective optimization of asymmetric v-shaped ribs in a cooling channel using CFD, artificial neural networks and genetic algorithms. Journal of the Brazilian Society of Mechanical Sciences and Engineering 39:6, pages 2319-2329.
Crossref
Crossref
Sunil Chamoli, Peng Yu & Shimin Yu. (2017) Multi-objective shape optimization of a heat exchanger tube fitted with compound inserts. Applied Thermal Engineering 117, pages 708-724.
Crossref
Crossref
Sun-Min Kim, Jun-Ho Jo, Ye-Eun Lee & Yeong-Seok Yoo. (2016) Comparative Study of Shell and Helically-Coiled Tube Heat Exchangers with Various Dimple Arrangements in Condensers for Odor Control in a Pyrolysis System. Energies 9:12, pages 1027.
Crossref
Crossref
Kishor Kulkarni & Kwang-Yong Kim. (2016) Comparative study of solar air heater performance with various shapes and configurations of obstacles. Heat and Mass Transfer 52:12, pages 2795-2811.
Crossref
Crossref
Aatif Ali Khan, Sun-Min Kim & Kwang-Yong Kim. (2016) Performance Analysis of a Microchannel Heat Sink with Various Rib Configurations. Journal of Thermophysics and Heat Transfer 30:4, pages 782-790.
Crossref
Crossref
Jae-Won Seo, Arshad Afzal & Kwang-Yong Kim. (2016) Efficient multi-objective optimization of a boot-shaped rib in a cooling channel. International Journal of Thermal Sciences 106, pages 122-133.
Crossref
Crossref
Narasimha R. Nagaiah, Jayanta S. Kapat & Christopher D. Geiger. (2016) Three-objective Optimization for the Design of Mechanical Component Using Evolutionary Numerical Simulation Approach. Three-objective Optimization for the Design of Mechanical Component Using Evolutionary Numerical Simulation Approach.
Jongmyung Park, Samgyu Park & P. M. Ligrani. (2015) Numerical predictions of detailed flow structural characteristics in a channel with angled rib turbulators. Journal of Mechanical Science and Technology 29:11, pages 4981-4991.
Crossref
Crossref
Sang-Moon Lee & Kwang-Yong Kim. (2015) Multi-objective optimization of arc-shaped ribs in the channels of a printed circuit heat exchanger. International Journal of Thermal Sciences 94, pages 1-8.
Crossref
Crossref
Bingxu Wang, Weihong Zhang, Gongnan Xie, Yingjie Xu & Manyu Xiao. (2015) Multiconfiguration Shape Optimization of Internal Cooling Systems of a Turbine Guide Vane Based on Thermomechanical and Conjugate Heat Transfer Analysis. Journal of Heat Transfer 137:6.
Crossref
Crossref
Kishor Kulkarni, Arshad Afzal & Kwang-Yong Kim. (2015) Multi-objective optimization of solar air heater with obstacles on absorber plate. Solar Energy 114, pages 364-377.
Crossref
Crossref
Sombat Tamna, Sompol Skullong, Chinaruk Thianpong & Pongjet Promvonge. (2014) Heat transfer behaviors in a solar air heater channel with multiple V-baffle vortex generators. Solar Energy 110, pages 720-735.
Crossref
Crossref
S. Caliskan. (2014) Experimental investigation of heat transfer in a channel with new winglet-type vortex generators. International Journal of Heat and Mass Transfer 78, pages 604-614.
Crossref
Crossref
Mi-Ae Moon, Min-Jung Park & Kwang-Yong Kim. (2014) Evaluation of heat transfer performances of various rib shapes. International Journal of Heat and Mass Transfer 71, pages 275-284.
Crossref
Crossref
Mi-Ae Moon, Min-Jung Park & Kwang-Yong Kim. (2013) Shape optimization of staggered ribs in a rotating equilateral triangular cooling channel. Heat and Mass Transfer 50:4, pages 533-544.
Crossref
Crossref
Narasimha R. Nagaiah & Christopher D. Geiger. (2014) Evolutionary numerical simulation approach for design optimization of gas turbine blade cooling channels. International Journal for Simulation and Multidisciplinary Design Optimization 5, pages A22.
Crossref
Crossref
Abdulmajeed A. Ramadhan, Yaser T. Al Anii & Amer J. Shareef. (2012) Groove geometry effects on turbulent heat transfer and fluid flow. Heat and Mass Transfer 49:2, pages 185-195.
Crossref
Crossref
Min-Jung Park, Mi-Ae Moon & Kwang-Yong Kim. (2012) Numerical Study on Various Ribs in a Triangular Internal Cooling Channel. Journal of Fluid Machinery 15:4, pages 19-26.
Crossref
Crossref
C. Nuntadusit, M. Wae-hayee, A. Bunyajitradulya & S. Eiamsa-ard. (2012) Thermal visualization on surface with transverse perforated ribs. International Communications in Heat and Mass Transfer 39:5, pages 634-639.
Crossref
Crossref
Pongjet Promvonge, Wayo Changcharoen, Sutapat Kwankaomeng & Chinaruk Thianpong. (2011) Numerical heat transfer study of turbulent square-duct flow through inline V-shaped discrete ribs. International Communications in Heat and Mass Transfer 38:10, pages 1392-1399.
Crossref
Crossref
S.W. Chang, K.F. Chiang & J.K. Kao. (2011) Heat transfer and pressure drop in a square spiral channel roughened by in-line skew ribs. International Journal of Heat and Mass Transfer 54:15-16, pages 3167-3178.
Crossref
Crossref
Gongnan Xie, Bengt Sundén, Esa Utriainen & Lieke Wang. (2010) Computational Analysis of Pin-Fin Arrays Effects on Internal Heat Transfer Enhancement of a Blade Tip Wall. Journal of Heat Transfer 132:3.
Crossref
Crossref
A.G. Kanaris, A.A. Mouza & S.V. Paras. (2009) Optimal design of a plate heat exchanger with undulated surfaces. International Journal of Thermal Sciences 48:6, pages 1184-1195.
Crossref
Crossref
Kwang-Yong Kim & Dong-Yoon Shin. (2008) Optimization of a staggered dimpled surface in a cooling channel using Kriging model. International Journal of Thermal Sciences 47:11, pages 1464-1472.
Crossref
Crossref
Smith Eiamsa-ard & Pongjet Promvonge. (2008) Numerical study on heat transfer of turbulent channel flow over periodic grooves. International Communications in Heat and Mass Transfer 35:7, pages 844-852.
Crossref
Crossref
Chin-Hsiang Cheng, Chi-Kang Chan & Guang-Jer Lai. (2008) Shape design of millimeter-scale air channels for enhancing heat transfer and reducing pressure drop. International Journal of Heat and Mass Transfer 51:9-10, pages 2335-2345.
Crossref
Crossref