Citations (50)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (7)
Sandeep Jain, Piyush Kumar, Vinod Kumar, Abhijit Ghosh & Sumanta Samal. (2022) Solidification simulation of single-phase Fe–Co–Cr–Ni–V high entropy alloy. Philosophical Magazine 102:18, pages 1832-1852.
Read now
Read now
Leo Lukose & Tanmay Basak. (2021) Unified approach on numerical implementation of heatfunction boundary conditions for accurate prediction of heatlines involving steady convection in enclosures. Numerical Heat Transfer, Part A: Applications 80:6, pages 291-317.
Read now
Read now
L. Henríquez-Vargas, F. Angel, A. Reyes, N. Pailahueque & P. Donoso-García. (2020) Simulation of a solar energy accumulator based on phase change materials. Numerical Heat Transfer, Part A: Applications 77:5, pages 443-459.
Read now
Read now
Manuel S. Romero-Cano, Antonio M. Puertas, Sabina Rosiek & F. J. Batlles. (2019) Kinetics of freezing and melting of encapsulated phase change materials with effective convection: Experiments and simulations. Numerical Heat Transfer, Part A: Applications 76:12, pages 909-924.
Read now
Read now
Sepehr Mousavi, Majid Siavashi & Mohammad Mahdi Heyhat. (2019) Numerical melting performance analysis of a cylindrical thermal energy storage unit using nano-enhanced PCM and multiple horizontal fins. Numerical Heat Transfer, Part A: Applications 75:8, pages 560-577.
Read now
Read now
Isaac Perez-Raya & Satish G. Kandlikar. (2016) Numerical modeling of interfacial heat and mass transport phenomena during a phase change using ANSYS-Fluent. Numerical Heat Transfer, Part B: Fundamentals 70:4, pages 322-339.
Read now
Read now
M. D. Muhammad, O. Badr & H. Yeung. (2015) CFD Modeling of the Charging and Discharging of a Shell-and-Tube Latent Heat Storage System for High-Temperature Applications. Numerical Heat Transfer, Part A: Applications 68:8, pages 813-826.
Read now
Read now
Articles from other publishers (43)
Arman Moaveni, Majid Siavashi & Sepehr Mousavi. (2024) Passive and hybrid battery thermal management system by cooling flow control, employing nano-PCM, fins, and metal foam. Energy 288, pages 129809.
Crossref
Crossref
Dario Guarda, Jorge Martinez-Garcia, Benjamin Fenk, David Schiffmann, Damian Gwerder, Anastasia Stamatiou, Jörg Worlitschek, Simone Mancin & Philipp Schuetz. (2023) New liquid fraction measurement methodology for phase change material analysis based on X-ray computed tomography. International Journal of Thermal Sciences 194, pages 108585.
Crossref
Crossref
Shouguang Yao, Min Zuo & Xinyu Huang. (2023) Evaluation and Optimization of the Thermal Storage Performance of a Triplex-Tube Thermal Energy Storage System with V-Shaped Fins. Journal of Thermal Science 32:6, pages 2048-2064.
Crossref
Crossref
Asif Afzal, Ravindra Jilte, Mohammed Samee, Umit Ağbulut, Saboor Shaik, Sung Goon Park & Mamdooh Alwetaishi. (2023) Melting numerical simulation of hydrated salt phase change material in thermal management of cylindrical battery cells using enthalpy-porosity model. Sustainable Energy Technologies and Assessments 59, pages 103395.
Crossref
Crossref
Abolfazl NematpourKeshteli, Marcello Iasiello, Giuseppe Langella & Nicola Bianco. (2023) Increasing melting and solidification performances of a phase change material-based flat plate solar collector equipped with metal foams, nanoparticles, and wavy wall-Y-shaped surface. Energy Conversion and Management 291, pages 117268.
Crossref
Crossref
A. Mohammadian Soodmand, B. Azimi, S. Nejatbakhsh, H. Pourpasha, M. Ebrahimi Farshchi, H. Aghdasinia, M. Mohammadpourfard & S. Zeinali Heris. (2023) A comprehensive review of computational fluid dynamics simulation studies in phase change materials: applications, materials, and geometries. Journal of Thermal Analysis and Calorimetry.
Crossref
Crossref
Rishikesh Kumar, Mohd. Kaleem Khan & Manabendra Pathak. (2023) Efficient Thermoelectric Cooler for Localized Cooling in Electronic Devices. Journal of Thermal Science and Engineering Applications 15:8.
Crossref
Crossref
Hasan Najafi Khaboshan, Farzad Jaliliantabar, Abdul Adam Abdullah & Satyam Panchal. (2023) Improving the cooling performance of cylindrical lithium-ion battery using three passive methods in a battery thermal management system. Applied Thermal Engineering 227, pages 120320.
Crossref
Crossref
Jinghua Yu, Hongyun Yang, Junwei Tao, Jingang Zhao & Yongqiang Luo. (2023) Performance Evaluation and Optimum Design of Ventilation Roofs with Different Positions of Shape-Stabilized PCM. Sustainability 15:11, pages 8721.
Crossref
Crossref
Sepehr Mousavi, Amirhosein Zadehkabir, Majid Siavashi & Xiaohu Yang. (2023) An improved hybrid thermal management system for prismatic Li-ion batteries integrated with mini-channel and phase change materials. Applied Energy 334, pages 120643.
Crossref
Crossref
Milan Sojitra, Sachin Gupta, Arunendra Kumar Tiwari, Asim Kumar Joshi & Ramkishore Singh. 2023. Advances in Clean Energy and Sustainability. Advances in Clean Energy and Sustainability
529
538
.
Sindre Engzelius Gylver & Kristian Etienne Einarsrud. 2023. Light Metals 2023. Light Metals 2023
691
698
.
Zhiping Li, Ying Zhu, Yong Liu, Chenxu Cao, Jiaojiao Wu & Fei Huang. (2022) Study of a new method for the instant preparation of ice particles in ice abrasive air jet. Scientific Reports 12:1.
Crossref
Crossref
S. Madhankumar & Karthickeyan Viswanathan. (2022) Computational and experimental study of a novel corrugated-type absorber plate solar collector with thermal energy storage moisture removal device. Applied Energy 324, pages 119746.
Crossref
Crossref
Hicham El Mghari, Abdellah Idrissi & Rachid El Amraoui. (2022) Cascaded latent heat thermal energy storage device with longitudinal fins: Numerical investigation of melting process and thermal performance analysis. Journal of Energy Storage 53, pages 105199.
Crossref
Crossref
Amin Shahsavar, Abbas Goodarzi, Ighball Baniasad Askari, Mehdi Jamei, Masoud Karbasi & Masoud Afrand. (2022) The entropy generation analysis of the influence of using fins with tip clearance on the thermal management of the batteries with phase change material: Application a new gradient-based ensemble machine learning approach. Engineering Analysis with Boundary Elements 140, pages 432-446.
Crossref
Crossref
Hossein Rahmanian‐Koushkaki, Saeed Rahmanian, Mahbod Moein‐Jahromi & Kamaruzzaman Sopian. (2022) Performance evaluation of concentrated photovoltaics with phase change materials embedded metal foam‐based heat sink using gradient strategy. International Journal of Energy Research 46:9, pages 12290-12315.
Crossref
Crossref
Ankur Sharma & Satish Kumar Dewangan. (2021) Performance analysis of melting behavior of phase change material encapsulated within differently shaped macro-capsule. International Journal of Energy and Environmental Engineering 13:1, pages 377-394.
Crossref
Crossref
Liping Song, Suchen Wu, Cheng Yu & Wei Gao. (2022) Thermal performance analysis and enhancement of the multi-tube latent heat storage (MTLHS) unit. Journal of Energy Storage 46, pages 103812.
Crossref
Crossref
Yousef Kanani, Avijit Karmakar & Sumanta Acharya. (2021) Phase-Change Process Inside a Small-Radii Cylinder Subjected to Cyclic Convective Boundary Conditions: A Numerical Study. Journal of Heat Transfer 143:10.
Crossref
Crossref
Sepehr Mousavi, Majid Siavashi & Amirhosein Zadehkabir. (2021) A new design for hybrid cooling of Li-ion battery pack utilizing PCM and mini channel cold plates. Applied Thermal Engineering 197, pages 117398.
Crossref
Crossref
Xiao Sun, Wenyu Liao, Aditya Kumar, Kamal H. Khayat, Zhenghong Tian & Hongyan Ma. (2021) Multi-level modeling of thermal behavior of phase change material incorporated lightweight aggregate and concrete. Cement and Concrete Composites 122, pages 104131.
Crossref
Crossref
Abdalqader Ahmad, Helena Navarro, Saikat Ghosh, Yulong Ding & Jatindra Nath Roy. (2021) Evaluation of New PCM/PV Configurations for Electrical Energy Efficiency Improvement through Thermal Management of PV Systems. Energies 14:14, pages 4130.
Crossref
Crossref
Nesrine Boulaktout, El Hacene Mezaache, Mohamed Teggar, Müslüm Arıcı, Kamal A. R. Ismail & Çağatay Yıldız. (2021) Effect of Fin Orientation on Melting Process in Horizontal Double Pipe Thermal Energy Storage Systems. Journal of Energy Resources Technology 143:7.
Crossref
Crossref
Felipe S dos Santos, Kamal A.R. Ismail, Fatima A.M. Lino, Ahmad Arabkoohsar & Taynara G.S. Lago. (2020) Parametric investigation of the enhancing effects of finned tubes on the solidification of PCM. International Journal of Heat and Mass Transfer 152, pages 119485.
Crossref
Crossref
Mohammad Mahdi Heyhat, Sepehr Mousavi & Majid Siavashi. (2020) Battery thermal management with thermal energy storage composites of PCM, metal foam, fin and nanoparticle. Journal of Energy Storage 28, pages 101235.
Crossref
Crossref
Z. Badiei, M. Eslami & K. Jafarpur. (2020) Performance improvements in solar flat plate collectors by integrating with phase change materials and fins: A CFD modeling. Energy 192, pages 116719.
Crossref
Crossref
Leo Lukose & Tanmay Basak. (2019) Heatlines vs energy flux vectors: Tools for heat flow visualization. International Communications in Heat and Mass Transfer 108, pages 104265.
Crossref
Crossref
Mohamed Fadl & Philip C. Eames. (2019) An experimental investigations of the melting of RT44HC inside a horizontal rectangular test cell subject to uniform wall heat flux. International Journal of Heat and Mass Transfer 140, pages 731-742.
Crossref
Crossref
Israel B. Sebastião, Bakul Bhatnagar, Serguei Tchessalov, Satoshi Ohtake, Matthias Plitzko, Bernhard Luy & Alina Alexeenko. (2019) Bulk Dynamic Spray Freeze-Drying Part 2: Model-Based Parametric Study for Spray-Freezing Process Characterization. Journal of Pharmaceutical Sciences 108:6, pages 2075-2085.
Crossref
Crossref
A.K. Raj, M. Srinivas & S. Jayaraj. (2019) CFD modeling of macro-encapsulated latent heat storage system used for solar heating applications. International Journal of Thermal Sciences 139, pages 88-104.
Crossref
Crossref
S. Saeed Mostafavi Tehrani, Gonzalo Diarce & Robert A. Taylor. (2018) The error of neglecting natural convection in high temperature vertical shell-and-tube latent heat thermal energy storage systems. Solar Energy 174, pages 489-501.
Crossref
Crossref
T. Bouhal, Saïf ed-Dîn Fertahi, T. Kousksou & A. Jamil. (2018) CFD thermal energy storage enhancement of PCM filling a cylindrical cavity equipped with submerged heating sources. Journal of Energy Storage 18, pages 360-370.
Crossref
Crossref
Prahlad Kulkarni, Prachi Kale, Collier Miers & Amy Marconnet. (2018) Combined Experimental-Numerical Investigation of Metal-Wax Interactions for Phase Change Thermal Energy Storage. Combined Experimental-Numerical Investigation of Metal-Wax Interactions for Phase Change Thermal Energy Storage.
Nibir Mandal, Shamik Sarkar, Amiya Baruah & Urmi Dutta. (2018) Production, pathways and budgets of melts in mid-ocean ridges: An enthalpy based thermo-mechanical model. Physics of the Earth and Planetary Interiors 277, pages 55-69.
Crossref
Crossref
Rani Puthukulangara Ramachandran, Mohsen Akbarzadeh, Jitendra Paliwal & Stefan Cenkowski. (2017) Computational Fluid Dynamics in Drying Process Modelling—a Technical Review. Food and Bioprocess Technology 11:2, pages 271-292.
Crossref
Crossref
M.D. Muhammad & O. Badr. (2017) Performance of a finned, latent-heat storage system for high temperature applications. Applied Thermal Engineering 116, pages 799-810.
Crossref
Crossref
X. Xia & H. Y. Zhang. (2016) Numerical Study of Thermal Behavior of Phase Change Material for Thermal Management of Cylindrical Power Batteries. Numerical Study of Thermal Behavior of Phase Change Material for Thermal Management of Cylindrical Power Batteries.
Monisha Roy, Pratibha Biswal & Tanmay Basak. (2016) On the finite element based evaluation of Nusselt numbers for curved walls. International Communications in Heat and Mass Transfer 77, pages 123-131.
Crossref
Crossref
X Xia, H Y Zhang & Y C Deng. (2016) Numerical analysis of phase change materials for thermal control of power battery of high power dissipations. IOP Conference Series: Earth and Environmental Science 40, pages 012046.
Crossref
Crossref
Mohammed Bechiri & Kacem Mansouri. (2016) Analytical study of heat generation effects on melting and solidification of nano-enhanced PCM inside a horizontal cylindrical enclosure. Applied Thermal Engineering 104, pages 779-790.
Crossref
Crossref
I. Perez-Raya & S.G. Kandlikar. 2016.
125
190
.
Hasan Najafi Khaboshan, Farzad Jaliliantabar, Abdul Adam Abdullah & Satyam Panchal. (2022) Improving the Cooling Performance of Cylindrical Lithium-Ion Battery Using Three Passive Methods in a Battery Thermal Management System. SSRN Electronic Journal.
Crossref
Crossref