Advanced search
Publication Cover
Materials and Manufacturing Processes Volume 21, 2006 - Issue 4
Submit an article Journal homepage
280
Views
36
CrossRef citations to date
0
Altmetric
ARTICLES

Modeling and Optimization of Process Parameters for Defect Toleranced Drilling of GFRP Composites

S. Arul Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai, India
,
D. Samuel Raj Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai, India
,
L. Vijayaraghavan Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai, IndiaCorrespondence[email protected]
,
S. K. Malhotra Composites Technology Center, Indian Institute of Technology Madras, Chennai, India
&
R. Krishnamurthy Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai, India
Pages 357-365 | Received 07 Jan 2005, Accepted 23 Mar 2005, Published online: 07 Feb 2007

Citations (36)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (5)

Karthick Rasu & Anbumalar Veerabathiran. (2022) A Review on Drilling of Natural and Synthetic Fiber Reinforced Polymer Composites: 1992 - 2021. Journal of Natural Fibers 19:16, pages 15100-15115.
Read now
D. Samuel Raj & L. Karunamoorthy. (2016) Study of the Effect of Tool Wear on Hole Quality in Drilling CFRP to Select a Suitable Drill for Multi-Criteria Hole Quality. Materials and Manufacturing Processes 31:5, pages 587-592.
Read now
R. Venkata Rao & V.D. Kalyankar. (2012) Parameter Optimization of Machining Processes Using a New Optimization Algorithm. Materials and Manufacturing Processes 27:9, pages 978-985.
Read now
S. Kumar, S.R. Chauhan, P.K. Rakesh, I. Singh & J.P. Davim. (2012) Drilling of Glass Fiber/Vinyl Ester Composites with Fillers. Materials and Manufacturing Processes 27:3, pages 314-319.
Read now
T. Rajmohan & K. Palanikumar. (2011) Experimental Investigation and Analysis of Thrust Force in Drilling Hybrid Metal Matrix Composites by Coated Carbide Drills. Materials and Manufacturing Processes 26:8, pages 961-968.
Read now

Articles from other publishers (31)

K. S. Lokesh, C. G. Ramachandra, G. Ravindra Babu & D. Shrinivasa Mayya. 2024. Structural Composite Materials. Structural Composite Materials 263 273 .
Sezer Morkavuk, Uğur Köklü & Kubilay Aslantaş. (2022) An Experimental Comprehensive Analysis of Drilling Carbon Fiber Reinforced Plastic Tubes and Comparison With Carbon Fiber Reinforced Plastic Plate. Journal of Reinforced Plastics and Composites 42:7-8, pages 323-345.
Crossref
Praveenkumara Jagadeesh, Sanjay Mavinkere Rangappa, Indran Suyambulingam, Suchart Siengchin, Madhu Puttegowda, Joseph Selvi Binoj, Sergey Gorbatyuk, Anish Khan, Mrityunjay Doddamani, Vincenzo Fiore & Marta María Moure Cuadrado. (2023) Drilling characteristics and properties analysis of fiber reinforced polymer composites: A comprehensive review. Heliyon 9:3, pages e14428.
Crossref
Sezer Morkavuk, Uğur Köklü & Kubilay Aslantaş. (2022) An experimental investigation on the influence of different surface curvatures in drilling machinability of carbon fiber reinforced plastic. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 236:22, pages 10953-10968.
Crossref
Anshuman Kumar & Chandramani Upadhyay. (2021) Experimental investigation and optimization of machining performance characteristics during WEDM of inconel 718: On evaluation of wire electrodes and advanced parameter techniques. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 236:3, pages 1645-1665.
Crossref
Hazari NARESH & Padhy CHINMAYA PRASAD. (2020) Lathe Parameters Optimization for UD-GFRP Composite Part Turning with PCD Tool by Taguchi Method. INCAS BULLETIN 12:4, pages 135-144.
Crossref
Jogendra Kumar, Rajesh Kumar Verma & Kishore Debnath. (2020) A new approach to control the delamination and thrust force during drilling of polymer nanocomposites reinforced by graphene oxide/carbon fiber. Composite Structures 253, pages 112786.
Crossref
Halil Burak Kaybal, Ali Unuvar, Yusuf Kaynak & Ahmet Avcı. (2019) Evaluation of boron nitride nanoparticles on delamination in drilling carbon fiber epoxy nanocomposite materials. Journal of Composite Materials 54:2, pages 215-227.
Crossref
Ritesh Bhat, Nanjangud Mohan, Sathyashankara Sharma, Achutha U. Kini, Shivamurthy Shivakumar & Nithesh Naik. (2020) Multi response parametric optimisation in machining of marine application based GFRP composite with HSS drill: Application of TOPSIS approach. Materials Today: Proceedings 28, pages 2077-2083.
Crossref
Muhammad Aamir, Majid Tolouei-Rad, Khaled Giasin & Ataollah Nosrati. (2019) Recent advances in drilling of carbon fiber–reinforced polymers for aerospace applications: a review. The International Journal of Advanced Manufacturing Technology 105:5-6, pages 2289-2308.
Crossref
Uğur Köklü, Murat Mayda, Sezer Morkavuk, Ahmet Avcı & Okan Demir. (2019) Optimization and prediction of thrust force, vibration and delamination in drilling of functionally graded composite using Taguchi, ANOVA and ANN analysis. Materials Research Express 6:8, pages 085335.
Crossref
Gopalakrishnan Ramya Devi & Kayaroganam Palanikumar. (2019) Analysis on drilling of woven glass fibre reinforced aluminium sandwich laminates. Journal of Materials Research and Technology 8:1, pages 1024-1035.
Crossref
D. Samuel Raj & L. Karunamoorthy. (2019) Performance of cryogenically treated WC drill using tool wear measurements on the cutting edge and hole surface topography when drilling CFRP. International Journal of Refractory Metals and Hard Materials 78, pages 32-44.
Crossref
M.S. Abdullah, A.B. Abdullah & Z. Samad. 2019. Hole-Making and Drilling Technology for Composites. Hole-Making and Drilling Technology for Composites 1 15 .
Kalyan Kumar Singh & Dhiraj Kumar. (2016) Experimental investigation and modelling of drilling on multi-wall carbon nanotube–embedded epoxy/glass fabric polymeric nanocomposites. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 232:11, pages 1943-1959.
Crossref
R Arun Ramnath, PR Thyla, N Mahendra Kumar & S Aravind. (2017) Optimization of machining parameters of composites using multi-attribute decision-making techniques: A review. Journal of Reinforced Plastics and Composites 37:2, pages 77-89.
Crossref
B. Ramesh, A. Elayaperumal, S. Satishkumar & Anish Kumar. (2018) Drilling of pultruded and liquid composite moulded glass/epoxy thick composites: Experimental and statistical investigation. Measurement 114, pages 109-121.
Crossref
Harshadeep S. Joshi, Surjya K. Pal & Goutam Chakraborty. 2018. Simulations for Design and Manufacturing. Simulations for Design and Manufacturing 1 43 .
T. Xia, Y. Kaynak, C. Arvin & I. S. Jawahir. (2015) Cryogenic cooling-induced process performance and surface integrity in drilling CFRP composite material. The International Journal of Advanced Manufacturing Technology 82:1-4, pages 605-616.
Crossref
Meenu Gupta & Surinder Kumar. (2015) Investigation of surface roughness and MRR for turning of UD-GFRP using PCA and Taguchi method. Engineering Science and Technology, an International Journal 18:1, pages 70-81.
Crossref
P. Marimuthu & P. Raveendran. (2014) Experimental Study of Parameter for Turning GFRP Using Coated Tool. Applied Mechanics and Materials 573, pages 655-658.
Crossref
Hsin-Te Liao, Chorng-Jyh Tzeng, Yung-Kuang Yang, Yung-Chih Li & Chih-Hung Tsai. (2012) Using a d-optimal mixture design to study the thermal properties of short glass fiber- and polytetrafluoroethylene-reinforced polycarbonate composites. Neural Computing and Applications 24:3-4, pages 833-844.
Crossref
Hsin-Te Liao & Zhi-Wei Chen. (2012) A study on fiber laser micro-spot welding of thin stainless steel using response surface methodology and simulated annealing approach. The International Journal of Advanced Manufacturing Technology 67:5-8, pages 1015-1025.
Crossref
T.V. Rajamurugan, K. Shanmugam & K. Palanikumar. (2013) Analysis of delamination in drilling glass fiber reinforced polyester composites. Materials & Design 45, pages 80-87.
Crossref
Rong Tai Yang, Chorng Jyh Tzeng, Yung Kuang Yang & Ming Hua Hsieh. (2011) Optimization of wire electrical discharge machining process parameters for cutting tungsten. The International Journal of Advanced Manufacturing Technology 60:1-4, pages 135-147.
Crossref
Yung-Kuang Yang, Chorng-Jyh Tzeng, Rong-Tai Yang & Ming-Hua Hsieh. (2011) Study on tribological behaviors of short glass fiber and polytetrafluoroethylene reinforced polycarbonate composites via a d-optimal mixture design. Polymers for Advanced Technologies 22:12, pages 2191-2200.
Crossref
T. Yang, Y.-K. Yang & C.-Y. Chen. (2011) Optimization of Injection Molding Process for SGF and PTFE Reinforced PC Composites Using Response Surface Methodology and Simulated Annealing Approach. International Polymer Processing 26:5, pages 525-539.
Crossref
B. LathaV.S. Senthilkumar & K. Palanikumar. (2011) Influence of drill geometry on thrust force in drilling GFRP composites. Journal of Reinforced Plastics and Composites 30:6, pages 463-472.
Crossref
R. Venkata RaoR. Venkata Rao. 2011. Advanced Modeling and Optimization of Manufacturing Processes. Advanced Modeling and Optimization of Manufacturing Processes 55 175 .
B. Işık & A. Kentli. (2009) Multicriteria optimization of cutting parameters in turning of UD-GFRP materials considering sensitivity. The International Journal of Advanced Manufacturing Technology 44:11-12, pages 1144-1153.
Crossref
R.C. YU & A. PANDOLFI. 2008. Delamination Behaviour of Composites. Delamination Behaviour of Composites 429 457 .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.