Advanced search
Publication Cover
Materials and Manufacturing Processes Volume 21, 2006 - Issue 4
Submit an article Journal homepage
420
Views
61
CrossRef citations to date
0
Altmetric
ARTICLES

Parametric Optimization of Centrifugal Force-Assisted Abrasive Flow Machining (CFAAFM) by the Taguchi Method

R. S. Walia Department of Mechanical and Industrial Engineering, Indian Institute of Technology, Roorkee, India
,
H. S. Shan Department of Mechanical and Industrial Engineering, Indian Institute of Technology, Roorkee, India
&
Pradeep Kumar Department of Mechanical and Industrial Engineering, Indian Institute of Technology, Roorkee, IndiaCorrespondence[email protected]
Pages 375-382 | Received 05 Feb 2005, Accepted 23 Feb 2005, Published online: 07 Feb 2007

Citations (61)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (13)

Shilpi Ahluwalia, Amrit Pal Toor, Pushpendra Singh & Jai Gopal Sharma. (2023) Parametric optimisation for detoxification of non-oil Jatropha residual material using Taguchi method. Advances in Materials and Processing Technologies 9:2, pages 655-664.
Read now
Palwinder Singh, Lakhvir Singh & Sehijpal Singh. (2022) A box behnken design approach for parametric optimization in processing of aluminum 6061 tubes. Materials and Manufacturing Processes 37:10, pages 1110-1121.
Read now
Aref Azami, Abdolhamid Azizi, Ali Khoshanjam & Mohammadjafar Hadad. (2020) A new approach for nanofinishing of complicated-surfaces using rotational abrasive finishing process. Materials and Manufacturing Processes 35:8, pages 940-950.
Read now
Jai Kishan Sambharia, Harlal Singh Mali & Vishal Garg. (2018) Experimental investigation on unidirectional abrasive flow machining of trim die workpiece. Materials and Manufacturing Processes 33:6, pages 651-660.
Read now
A. Cheng Wang, Ken Chuan Cheng, Kuan Yu Chen & Yan-Cherng Lin. (2014) Enhancing the Surface Precision for the Helical Passageways in Abrasive Flow Machining. Materials and Manufacturing Processes 29:2, pages 153-159.
Read now
Yuli Sun, Dunwen Zuo, Yongwei Zhu & Jun Li. (2013) Using Taguchi Method to Optimize Polishing Parameters in Ice Fixed Abrasive Polishing. Materials and Manufacturing Processes 28:8, pages 923-927.
Read now
Tarun Goyal, R.S. Walia & T.S. Sidhu. (2012) Effect of Parameters on Coating Density for Cold Spray Process. Materials and Manufacturing Processes 27:2, pages 193-200.
Read now
Tarun Goyal, Ravinderjit Singh Walia & T.S. Sidhu. (2012) Study of Coating Thickness of Cold Spray Process Using Taguchi Method. Materials and Manufacturing Processes 27:2, pages 185-192.
Read now
Jujhar Singh, P.S. Satsangi, R.S. Walia & V.P. Singh. (2011) Micro-Hardness and Machined Surface Damage Study for Continuous and Discontinuous Ultrasonic Vibration Assisted Electrical Discharge Machining. Materials and Manufacturing Processes 0:0.
Read now
Ching-Lien Hung, Wei-Liang Ku & Lieh-Dai Yang. (2010) Prediction System of Magnetic Abrasive Finishing (MAF) on the Internal Surface of a Cylindrical Tube. Materials and Manufacturing Processes 25:12, pages 1404-1412.
Read now
Tsuo-Fei Mao, Shie-Chen Yang, Feng-Che Tsai, Jung-Chou Hung & Biing-Hwa Yan. (2010) Experimental Investigation of Abrasive Jet Polishing on the Free-Form Machined Surfaces of SKD61 Mold Steel Using SiC Particles. Materials and Manufacturing Processes 25:9, pages 965-973.
Read now
Z. W. Zhong. (2008) Recent Advances in Polishing of Advanced Materials. Materials and Manufacturing Processes 23:5, pages 449-456.
Read now
R. S. Walia, H. S. Shan & P. Kumar. (2006) Multi-Response Optimization of CFAAFM Process Through Taguchi Method and Utility Concept. Materials and Manufacturing Processes 21:8, pages 907-914.
Read now

Articles from other publishers (48)

Anant Bhardwaj, Krovvidi Srinivas & Rajiv Chaudhary. (2023) Morphology of Finished Brass Surface by Thermal Additive Centrifugal Abrasive Flow Machining Process Using Novel Electrode. JOM.
Crossref
Anant Bhardwaj, Krovvidi Srinivas & Rajiv Chaudhary. (2023) Novel electrode for thermal additive centrifugal force-assisted abrasive flow machining. Journal of the Brazilian Society of Mechanical Sciences and Engineering 45:11.
Crossref
Anant Bhardwaj & Parvesh Ali. (2023) Finishing and Wear analysis of 3D-Printed Workpiece Through Centrifugal Force-Assisted Abrasive Flow Machining. MAPAN.
Crossref
Muniram Meena, Nitin Dixit & Varun Sharma. (2023) Abrasive Flow Machining of Additively Manufactured Femoral Head of the Hip Joint. Journal of Materials Engineering and Performance.
Crossref
Anant Bhardwaj, Krovvidi Srinivas & Rajiv Chaudhary. (2023) Analysis of thermal additive centrifugal abrasive flow machining process with improved electrode geometry. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.
Crossref
Anant Bhardwaj, K. Srinivas & Rajiv Chaudhary. (2023) Analysis of Shapes of Centrifugal Force-Generating Rod in Centrifugal Force-Assisted Abrasive Flow Machining Process. MAPAN 38:2, pages 459-479.
Crossref
Kefeng Song, Zhaozhi Guo, Haizhen Ji, Jun Wu & Jun Cheng. (2023) Modeling and experimental study on a deburring method of micro slots of Ti6Al4V tubes with ultra-small-grinding (USG) tool. The International Journal of Advanced Manufacturing Technology 126:5-6, pages 2713-2731.
Crossref
S. Mehta, P. Gauba, S. Kaushal, P. Ali, M. Dhanda & R. S. Walia. 2023. Recent Trends in Mechanical Engineering. Recent Trends in Mechanical Engineering 375 384 .
Palwinder Singh, Lakhvir Singh & Sehijpal Singh. (2022) A review on magnetically assisted abrasive flow machining and abrasive material type. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 236:6, pages 2765-2781.
Crossref
Shivam Yadav, Amit Sangoi & Raju Pawade. (2022) Development of Mathematical Model and Characterization of Internal Surface Obtained by Elasto-Abrasives Magneto-Spiral Finishing (EAMSF). Journal of Manufacturing Science and Engineering 144:11.
Crossref
Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, Kuldeep K. Saxena, Ana Pilar Valerga Puerta, Chander Prakash, Dharam Buddhi, J. P. Davim & Dalael Saad Abdul-Zahra. (2022) Understanding the Mechanism of Abrasive-Based Finishing Processes Using Mathematical Modeling and Numerical Simulation. Metals 12:8, pages 1328.
Crossref
Nitin Dixit, Varun Sharma & Pradeep Kumar. (2021) Experimental investigations into abrasive flow machining (AFM) of 3D printed ABS and PLA parts. Rapid Prototyping Journal 28:1, pages 161-174.
Crossref
Swarn Singh, Harish Kumar, Santosh Kumar & Saurabh Chaitanya. (2022) A systematic review on recent advancements in Abrasive Flow Machining (AFM). Materials Today: Proceedings 56, pages 3108-3116.
Crossref
Talwinder Singh Bedi, Ravi Kant & Hema Gurung. 2022. Advanced Micro- and Nano-manufacturing Technologies. Advanced Micro- and Nano-manufacturing Technologies 105 126 .
Raminder Kaur & Mukesh Kumar. (2021) Practice of Taguchi design of experiments in the valuation of mechanical behavior of rigid polyurethane foam composites. Polymers and Polymer Composites 29:9_suppl, pages S1075-S1083.
Crossref
Ankit Tyagi, Qasim Murtaza & R S Walia. (2021) Evaluation of the residual stress of HVOF sprayed carbon coating after wear testing conditions using ANN coupled Taguchi approach. Surface Topography: Metrology and Properties 9:3, pages 035027.
Crossref
Nitin Dixit, Varun Sharma & Pradeep Kumar. (2021) Research trends in abrasive flow machining: A systematic review. Journal of Manufacturing Processes 64, pages 1434-1461.
Crossref
Pawan Kumar Yadav & S. C. Jayswal. (2020) Multi-Response Optimization of Magnetic Abrasive Flow Finishing Process on Aluminum (6061-T6) Using Utility Concept Embedded Firefly’s Algorithm. Journal of Advanced Manufacturing Systems 20:01, pages 51-74.
Crossref
Parvesh Ali, R S Walia, Qasim Murtaza & Ranganath M S. (2020) Modeling and analysis of developed Thermal additive Centrifugal Abrasive Flow Machining process. Surface Topography: Metrology and Properties 8:3, pages 035013.
Crossref
Parvesh Ali, R. S. Walia, Qasim Murtaza & Ranganath Muttanna Singari. (2020) Material removal analysis of hybrid EDM-assisted centrifugal abrasive flow machining process for performance enhancement. Journal of the Brazilian Society of Mechanical Sciences and Engineering 42:6.
Crossref
Parvesh Ali, S.M. Pandey, M.S. Ranganath, R.S. Walia & Qasim Murtaza. (2020) Experimentation and modelling of CNT additive abrasive media for micro finishing. Measurement 151, pages 107133.
Crossref
Ankit Tyagi, SM Pandey, R S Walia, Qasim Murtaza & R S Mishra. (2020) Characterization and parametric optimization of % change in residual stress of Mo composite coating using Taguchi approach. Materials Research Express 6:12, pages 125623.
Crossref
Girija Moona, R.S. Walia, Vikas Rastogi & Rina Sharma. (2020) Parametric optimization of fatigue behaviour of hybrid aluminium metal matrix composites. Materials Today: Proceedings 21, pages 1441-1445.
Crossref
Ankit Tyagi, SM Pandey, Qasim Murtaza, R.S. Walia & Mohit Tyagi. (2020) Tribological behavior of carbon coating for piston ring applications using Taguchi approach. Materials Today: Proceedings 25, pages 759-764.
Crossref
Sanjay Sundriyal, Ravinder Singh Walia & Vipin. 2020. Advances in Unconventional Machining and Composites. Advances in Unconventional Machining and Composites 3 16 .
Navriti Gupta, R. S. Walia & A. K. Agrawal. 2020. Recent Advances in Mechanical Engineering. Recent Advances in Mechanical Engineering 289 298 .
Girija Moona, R S Walia, Vikas Rastogi & Rina Sharma. (2019) Parameter optimization and characterization of environmental friendly aluminium hybrid metal matrix composites. Materials Research Express 6:11, pages 1165d5.
Crossref
Ankit Tyagi, R.S. Walia & Qasim Murtaza. (2019) Tribological behavior of temperature dependent environment friendly thermal CVD diamond coating. Diamond and Related Materials 96, pages 148-159.
Crossref
Ankit Tyagi, Shailesh Mani Pandey, R S Walia & Qasim Murtaza. (2019) Characterization and parametric optimization of tribological properties of Mo blend composite coating. Materials Research Express 6:8, pages 086428.
Crossref
Rajeev Verma, Suman Kant & Narendra Mohan Suri. (2018) Process Optimization of Slurry Spray Technique Through Multi-attribute Utility Function. Arabian Journal for Science and Engineering 44:2, pages 919-934.
Crossref
Jaikishan Sambharia & Harlal Singh Mali. (2017) Recent developments in abrasive flow finishing process: A review of current research and future prospects. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 233:2, pages 388-399.
Crossref
Anant Bhardwaj, Parvesh Ali, R. S. Walia, Qasim Murtaza & S. M. Pandey. 2019. Advances in Industrial and Production Engineering. Advances in Industrial and Production Engineering 41 67 .
Ramakant Rana, R.S. Walia & Surabhi Lata. (2018) Development and Investigation of Hybrid Electric Discharge Machining Electrode Process. Materials Today: Proceedings 5:2, pages 3936-3942.
Crossref
Mithun Sarkar & VK Jain. (2015) Nanofinishing of freeform surfaces using abrasive flow finishing process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 231:9, pages 1501-1515.
Crossref
S. Santhosh Kumar & Somashekhar S. Hiremath. (2016) A Review on Abrasive Flow Machining (AFM). Procedia Technology 25, pages 1297-1304.
Crossref
B. S. Brar, R. S. Walia & V. P. Singh. (2015) Electrochemical-aided abrasive flow machining (ECA2FM) process: a hybrid machining process. The International Journal of Advanced Manufacturing Technology 79:1-4, pages 329-342.
Crossref
Rahul Vaishya, R.S. Walia & P. Kalra. (2015) Design and Development of Hybrid Electrochemical and Centrifugal Force Assisted Abrasive Flow Machining. Materials Today: Proceedings 2:4-5, pages 3327-3341.
Crossref
R. Venkata Rao & V. D. Kalyankar. (2014) Optimization of modern machining processes using advanced optimization techniques: a review. The International Journal of Advanced Manufacturing Technology 73:5-8, pages 1159-1188.
Crossref
V.S. Sooraj & V. Radhakrishnan. (2014) Fine finishing of internal surfaces using elastic abrasives. International Journal of Machine Tools and Manufacture 78, pages 30-40.
Crossref
Tarun Goyal, R. S. Walia & T. S. Sidhu. (2012) Multi-response optimization of low-pressure cold-sprayed coatings through Taguchi method and utility concept. The International Journal of Advanced Manufacturing Technology 64:5-8, pages 903-914.
Crossref
Yilmaz Ozcelik, Raimondo Ciccu & Augusto Bortolussi. (2013) Effect of Working Parameters on Excavation Rate and Specific Energy on Surface Treatment With Pure Water Jet. Journal of Testing and Evaluation 41:1, pages 104617.
Crossref
Wen Tsann Lin, Shen Tsu Wang & Meng Hua Li. (2011) A Study on Improving the Efficiency of the Knapp Test for Injection Ampoule Inspection by Applying the Taguchi Method, TRIZ and CBR. Advanced Materials Research 403-408, pages 2046-2049.
Crossref
R. Venkata RaoR. Venkata Rao. 2011. Advanced Modeling and Optimization of Manufacturing Processes. Advanced Modeling and Optimization of Manufacturing Processes 285 316 .
R S Walia, H S Shan & P Kumar. (2009) Modelling of centrifugal-force-assisted abrasive flow machining. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 223:4, pages 195-204.
Crossref
R. S. Walia, H. S. Shan & P. Kumar. (2009) Enhancing AFM process productivity through improved fixturing. The International Journal of Advanced Manufacturing Technology 44:7-8, pages 700-709.
Crossref
H S Mali & A Manna. (2009) Current status and application of abrasive flow finishing processes: A review. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 223:7, pages 809-820.
Crossref
R. S. Walia, H. S. Shan & P. Kumar. (2007) Morphology and integrity of surfaces finished by centrifugal force assisted abrasive flow machining. The International Journal of Advanced Manufacturing Technology 39:11-12, pages 1171-1179.
Crossref
R. S. Walia, H. S. Shan & P. Kumar. (2007) Determining dynamically active abrasive particles in the media used in centrifugal force assisted abrasive flow machining process. The International Journal of Advanced Manufacturing Technology 38:11-12, pages 1157-1164.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.