Citations (27)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (3)
Sirous Amirghodsi, Ali Bonyadi Naeini & Behrooz Roozbehani. (2020) An Integrated Shannon-PAF Method on Gray Numbers to Rank Technology Transfer Strategies. Engineering Management Journal 32:3, pages 186-207.
Read now
Read now
C. Chandrasekhara Sastry, P. Hariharan & M. Pradeep Kumar. (2019) Experimental investigation of dry, wet and cryogenic boring of AA 7075 alloy. Materials and Manufacturing Processes 34:7, pages 814-831.
Read now
Read now
N. Yuvaraj & M. Pradeep Kumar. (2015) Multiresponse Optimization of Abrasive Water Jet Cutting Process Parameters Using TOPSIS Approach. Materials and Manufacturing Processes 30:7, pages 882-889.
Read now
Read now
Articles from other publishers (24)
Ravindra Singh Saluja & Varinder Singh. (2023) Attribute-based characterization, coding, and selection of joining processes using a novel MADM approach. OPSEARCH 60:2, pages 616-655.
Crossref
Crossref
Rajesh Sharma, M.K. Pradhan & Pankaj Jain. (2022) Optimal selection of an AA8011 reinforced nano Si3N4 composite using multi criteria decision-making method. Materials Today: Proceedings 56, pages 1399-1405.
Crossref
Crossref
Xin Liu, Zheng Liu, Ziyu Xie & Pengqing Chen. (2021) Ergonomic Reliability Assessment for Operation Process of Medical Device Interface Design Based on OAT and CREAM. IOP Conference Series: Materials Science and Engineering 1043:4, pages 042041.
Crossref
Crossref
R. Thirumalai, M. Seenivasan & K. Panneerselvam. (2021) Experimental investigation and multi response optimization of turning process parameters for Inconel 718 using TOPSIS approach. Materials Today: Proceedings 45, pages 467-472.
Crossref
Crossref
Xin Liu, Zheng Liu, Jia-Tuo Chen, Xin-Lou Yu, Bin-Jun Lai, Bo Zhan & Sai-Fan Huang. (2020) Ergonomic Reliability Assessment for Passenger Car Interface Design Based on EWM-MADM and Human Cognitive Reliability Experiments. Mathematical Problems in Engineering 2020, pages 1-10.
Crossref
Crossref
Rupinder Singh, Jasminder Singh Dureja, Manu Dogra & Jugraj Singh Randhawa. (2019) Optimization of machining parameters under MQL turning of Ti-6Al-4V alloy with textured tool using multi-attribute decision-making methods. World Journal of Engineering 16:5, pages 648-659.
Crossref
Crossref
T. Geethapriyan, T. Muthuramalingam & K. Kalaichelvan. (2019) Influence of Process Parameters on Machinability of Inconel 718 by Electrochemical Micromachining Process using TOPSIS Technique. Arabian Journal for Science and Engineering 44:9, pages 7945-7955.
Crossref
Crossref
N. Pradeep, K. Shanmuga Sundaram & M. Pradeep Kumar. (2019) Multi-response optimization of electrochemical micromachining parameters for SS304 using polymer graphite electrode with NaNO3 electrolyte based on TOPSIS technique. Journal of the Brazilian Society of Mechanical Sciences and Engineering 41:8.
Crossref
Crossref
Jalil Vaziri, Ali Jahan, Ehsan Borhani, Mohammad Yousefieh & Kevin L Edwards. (2016) Evaluating promising applications of a new nanomaterial produced by accumulative roll bonding process: A preliminary multiple criteria decision-making approach. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 233:6, pages 1023-1032.
Crossref
Crossref
Muhammet Gul, Erkan Celik, Alev Taskin Gumus & Ali Fuat Guneri. (2018) A fuzzy logic based PROMETHEE method for material selection problems. Beni-Suef University Journal of Basic and Applied Sciences 7:1, pages 68-79.
Crossref
Crossref
Vinay Kumar Patel & Anil Dhanola. (2016) Influence of CaCO3, Al2O3, and TiO2 microfillers on physico-mechanical properties of Luffa cylindrica/polyester composites. Engineering Science and Technology, an International Journal 19:2, pages 676-683.
Crossref
Crossref
Nitin Upadhyay. (2016) SDMF: Systematic Decision-making Framework for Evaluation of Software Architecture. Procedia Computer Science 91, pages 599-608.
Crossref
Crossref
S.S. Baral, K. Raja Shekar, Megha Sharma & P.V. Rao. (2014) Optimization of leaching parameters for the extraction of rare earth metal using decision making method. Hydrometallurgy 143, pages 60-67.
Crossref
Crossref
Rodrigo Villanueva Ponce & Jorge Luis García Alcaraz. (2013) Evaluation of Technology using TOPSIS in Presence of Multi-collinearity in Attributes: Why use the Mahalanobis distance?. Revista Facultad de Ingeniería Universidad de Antioquia:67, pages 31-42.
Crossref
Crossref
ANKUR GARG & Avadhesh Yadav. (2013) Design Fabrication and Performance Evaluation of Parabolic Trough Concentrator. i-manager's Journal on Instrumentation and Control Engineering 1:2, pages 19-25.
Crossref
Crossref
Veera P. Darji & Ravipudi V. Rao. (2013) Application of AHP/EVAMIX Method for Decision Making in the Industrial Environment. American Journal of Operations Research 03:06, pages 542-569.
Crossref
Crossref
R. T. Durai Prabhakaran, Aage Lystrup & Tom Løgstrup Andersen. 2013. Dynamic Methods and Process Advancements in Mechanical, Manufacturing, and Materials Engineering. Dynamic Methods and Process Advancements in Mechanical, Manufacturing, and Materials Engineering
267
288
.
Majid Behzadian, S. Khanmohammadi Otaghsara, Morteza Yazdani & Joshua Ignatius. (2012) A state-of the-art survey of TOPSIS applications. Expert Systems with Applications 39:17, pages 13051-13069.
Crossref
Crossref
Jihong Pang, Genbao Zhang, Gengbao Huang & Guohua Chen. 2012. 2011 International Conference in Electrics, Communication and Automatic Control Proceedings. 2011 International Conference in Electrics, Communication and Automatic Control Proceedings
1405
1411
.
R. T. Durai Prabhakaran, Aage Lystrup & Tom Løgstrup Andersen. (2011) Attribute Based Selection of Thermoplastic Resin for Vacuum Infusion Process. International Journal of Manufacturing, Materials, and Mechanical Engineering 1:3, pages 31-52.
Crossref
Crossref
P. Venkateswara Rao & Saroj S. Baral. (2011) Attribute based specification, comparison and selection of feed stock for anaerobic digestion using MADM approach. Journal of Hazardous Materials 186:2-3, pages 2009-2016.
Crossref
Crossref
V. Singh, V.P. Agrawal & P. Deb. (2010) A decision making method for selection of finish process for a cylindrical surface. A decision making method for selection of finish process for a cylindrical surface.
Abhishek Kumar & V.P. Agrawal. (2009) Attribute based specification, comparison and selection of electroplating system using MADM approach. Expert Systems with Applications 36:8, pages 10815-10827.
Crossref
Crossref
Sachin WaigaonkarB.J.C. Babu & R.T. Durai Prabhakaran. (2008) A New Approach for Resin Selection in Rotational Molding. Journal of Reinforced Plastics and Composites 27:10, pages 1021-1037.
Crossref
Crossref