Citations (19)
Keep up to date with the latest research on this topic with citation updates for this article.
Read on this site (6)
Y. Zhou, G. Yang, Y. Yang, Y. Qin, D. Yin & Y. Zhang. (2014) Effect of heating rate on densification and magnetic properties of MnZn ferrites sintered by multiphysical fields coupling methodology. Advances in Applied Ceramics 113:5, pages 257-261.
Read now
Read now
J.M. Jafferson & P. Hariharan. (2013) Machining Performance of Cryogenically Treated Electrodes in Microelectric Discharge Machining: A Comparative Experimental Study. Materials and Manufacturing Processes 28:4, pages 397-402.
Read now
Read now
Shuiming Li, Hongyan Zhou, Liping Du, Xiangxin Xue & Hua Yang. (2012) Synthesis and Magnetic Properties of ZnO: Co–Fe Nanoparticles. Materials and Manufacturing Processes 27:12, pages 1315-1317.
Read now
Read now
Po-Huai Yu, Hsiang-Kuo Lee, Yang-Xin Lin, Shi-Jie Qin, Biing-Hwa Yan & Fuang-Yuan Huang. (2011) Machining Characteristics of Polycrystalline Silicon by Wire Electrical Discharge Machining. Materials and Manufacturing Processes 26:12, pages 1443-1450.
Read now
Read now
Lianxiang Yu, Xuewei Yang, Lei Wang & Hua Yang. (2011) Preparation and Magnetic Properties of Doped Ni-Fe/Fe3O4 Nanocomposite. Materials and Manufacturing Processes 26:11, pages 1383-1387.
Read now
Read now
Naveen Beri, Sachin Maheshwari, Chitra Sharma & Anil Kumar. (2010) Technological Advancement in Electrical Discharge Machining with Powder Metallurgy Processed Electrodes: A Review. Materials and Manufacturing Processes 25:10, pages 1186-1197.
Read now
Read now
Articles from other publishers (13)
Ruslan Kuzmin, Roman Khabirov, Anna Mass & Elena Lozhkina. (2023) Influence of the powders phase composition and sintering atmosphere on the structure and magnetic properties of Mn-Zn ferrites. Chimica Techno Acta 10:3.
Crossref
Crossref
Ahmet Tolunay Işık, Ramazan Çakıroğlu & Mustafa Günay. (2023) Multiresponse optimization of performance indicators through Taguchi-grey relational analysis in EDM of cemented carbide. CIRP Journal of Manufacturing Science and Technology 41, pages 490-500.
Crossref
Crossref
Ahmet Tolunay IŞIK & Ramazan CAKIROGLU. (2022) Investigation of Workpiece and Tool Surface Quality in Electro Discharge Machining of Al 5083 Alloy Produced by Powder MetallurgyToz Metalürjisi ile Üretilmiş Al 5083 Alaşımının Elektro Erozyon ile İşlenmesinde İş Parçası ve Takım Yüzey Yapısının İncelenmesi. İmalat Teknolojileri ve Uygulamaları 3:1, pages 47-58.
Crossref
Crossref
Sergey N. Grigoriev, Marina A. Volosova, Anna A. Okunkova, Sergey V. Fedorov, Khaled Hamdy & Pavel A. Podrabinnik. (2021) Sub-Microstructure of Surface and Subsurface Layers after Electrical Discharge Machining Structural Materials in Water. Metals 11:7, pages 1040.
Crossref
Crossref
Mohammad Sajjad Mahdieh & Sara Zare-Reisabadi. (2019) Effects of electro-discharge machining process on ultra-fined grain copper. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 233:15, pages 5341-5349.
Crossref
Crossref
Mohammad Sajjad Mahdieh & RamezanAli Mahdavinejad. (2016) Comparative Study on Electrical Discharge Machining of Ultrafine-Grain Al, Cu, and Steel. Metallurgical and Materials Transactions A 47:12, pages 6237-6247.
Crossref
Crossref
M. Y. Naz, S. Shukrullah, A. Ghaffar, I. Shakir, S. Ullah, M. Sagir & M. Pervaiz. (2015) Surface morphology and mechanical strength of AISI M2 tool steel treated in abnormal glow region of plasma. Surface Engineering and Applied Electrochemistry 51:1, pages 58-64.
Crossref
Crossref
T. Muthuramalingam & B. Mohan. (2015) A review on influence of electrical process parameters in EDM process. Archives of Civil and Mechanical Engineering 15:1, pages 87-94.
Crossref
Crossref
Samra Arooj, Masood Shah, Shahid Sadiq, Syed Hussain Imran Jaffery & Shahab Khushnood. (2014) Effect of Current in the EDM Machining of Aluminum 6061 T6 and its Effect on the Surface Morphology. Arabian Journal for Science and Engineering 39:5, pages 4187-4199.
Crossref
Crossref
Sonal Singhal, Rimi Sharma, Charanjit Singh & S. Bansal. (2013)
Enhanced Photocatalytic Degradation of Methylene Blue Using
/MWCNT Composite Synthesized by Hydrothermal Method
. Indian Journal of Materials Science 2013, pages 1-6.
Crossref
Crossref
Po-Huai Yu, Yang-Xin Lin, Hsiang-Kuo Lee, Chao-Chuang Mai & Biing-Hwa Yan. (2011) Improvement of wire electrical discharge machining efficiency in machining polycrystalline silicon with auxiliary-pulse voltage supply. The International Journal of Advanced Manufacturing Technology 57:9-12, pages 991-1001.
Crossref
Crossref
Fu Qiang Hu, Bo Yan Song, Y.F. Guo, X.D. Yang, J.C. Bai & D. Li. (2011) Study on Powder Mixed EDM of an Aluminium Matrix Composite. Advanced Materials Research 183-185, pages 1947-1951.
Crossref
Crossref
B.C. Routara,P. Sahoo,A. Bandyopadhyay,. (2007) Parametric Optimization of EDM Process Parameters Using Grey Relational Analysis for Multiple Performance Characteristics. Journal for Manufacturing Science and Production 8:2-4, pages 187-198.
Crossref
Crossref