Advanced search
Publication Cover
Materials and Manufacturing Processes Volume 22, 2007 - Issue 4
Submit an article Journal homepage
900
Views
134
CrossRef citations to date
0
Altmetric
Original Articles

Effect of Deep Cryogenic Treatment on the Carbide Precipitation and Tribological Behavior of D2 Steel

D. Das Department of Metallurgy and Materials Engineering, Bengal Engineering and Science University, Shibpur, Howrah, India
,
A. K. Dutta Department of Mechanical Engineering, Bengal Engineering and Science University, Shibpur, Howrah, IndiaCorrespondence[email protected] [email protected]
,
V. Toppo National Institute of Foundry and Forge Technology, Ranchi, Jharkhand, India
&
K. K. Ray Department of Metallurgical and Materials Engineering, Indian Institute of Technology, Kharagpur, India
Pages 474-480 | Received 10 Feb 2006, Accepted 30 Sep 2006, Published online: 10 Apr 2007

Citations (134)

Keep up to date with the latest research on this topic with citation updates for this article.

Subscribe to citation updates

Read on this site (22)

Shaohong Li, Han Guo, Junwan Li, Zhimin Li & Jun Li. (2022) Carbides precipitation and kinetics of H13 steel subjected to deep cryogenic treatment. Materials Science and Technology 38:16, pages 1376-1389.
Read now
S. Kumar, A.K. Ghose & I. Chakrabarty. (2021) Austempering and Cryogenic treatment of Vanadium modified Carbidic Ductile Iron. Materials and Manufacturing Processes 36:12, pages 1352-1364.
Read now
M. Padmakumar & D. Dinakaran. (2021) A review on cryogenic treatment of tungsten carbide (WC-Co) tool material. Materials and Manufacturing Processes 36:6, pages 637-659.
Read now
N. B. Dhokey, C. Thakur & P. Ghosh. (2021) Influence of Intermediate Cryogenic Treatment on the Microstructural Transformation and Shift in Wear Mechanism in AISI D2 Steel. Tribology Transactions 64:1, pages 91-100.
Read now
Silvio José Gobbi, Vagner João Gobbi, Gustavo Reinke, Palloma Vieira Muterlle & Daniel Monteiro Rosa. (2019) Ultra-low-temperature process effects on microscale abrasion of tool steel AISI D2. Materials Science and Technology 35:11, pages 1355-1364.
Read now
B. Mokarian, K. Amini, H. Ghayour & F Gharavi. (2019) The combined effect of cryogenic and boronising treatments on the wear behaviour and microstructure of DIN 1.2344 steel. Transactions of the IMF 97:3, pages 121-128.
Read now
Anil Kumar Singla, Jagtar Singh & Vishal S. Sharma. (2018) Processing of materials at cryogenic temperature and its implications in manufacturing: A review. Materials and Manufacturing Processes 33:15, pages 1603-1640.
Read now
T. Vignesh Kumar, Rama Thirumurugan & B. Viswanath. (2017) Influence of cryogenic treatment on the metallurgy of ferrous alloys: A review. Materials and Manufacturing Processes 32:16, pages 1789-1805.
Read now
K. K. Ray & D. Das. (2017) Improved wear resistance of steels by cryotreatment: the current state of understanding. Materials Science and Technology 33:3, pages 340-354.
Read now
S. Li & X. Wu. (2015) Microstructural evolution and corresponding property changes after deep cryotreatment of tool steel. Materials Science and Technology 31:15, pages 1867-1878.
Read now
C.L. Gogte, Ajay Likhite, Dilip Peshwe, Aniruddha Bhokarikar & Rahul Shetty. (2014) Effect of Cryogenic Processing on Surface Roughness of Age Hardenable AA6061 Alloy. Materials and Manufacturing Processes 29:6, pages 710-714.
Read now
P. F. da Silva Farina, A. Bellegard Farina, C. Antonio Barbosa & H. Goldenstein. (2013) Effects of cryogenic and stress relief treatments on temper carbide precipitation in AISI D2 tool steel. International Heat Treatment and Surface Engineering 7:3, pages 120-124.
Read now
A. Shokrani, V. Dhokia, P. Muñoz-Escalona & S.T. Newman. (2013) State-of-the-art cryogenic machining and processing. International Journal of Computer Integrated Manufacturing 26:7, pages 616-648.
Read now
S. Ravi & M. Pradeep Kumar. (2012) Experimental Investigation of Cryogenic Cooling in Milling of AISI D3 Tool Steel. Materials and Manufacturing Processes 27:10, pages 1017-1021.
Read now
R. Sri Siva, M. Arockia Jaswin & D. Mohan Lal. (2012) Enhancing the Wear Resistance of 100Cr6 Bearing Steel Using Cryogenic Treatment. Tribology Transactions 55:3, pages 387-393.
Read now
M. Dhananchezian, M. Pradeep Kumar & T. Sornakumar. (2011) Cryogenic Turning of AISI 304 Stainless Steel with Modified Tungsten Carbide Tool Inserts. Materials and Manufacturing Processes 26:5, pages 781-785.
Read now
M. Arockia Jaswin, D. Mohan Lal & A. Rajadurai. (2011) Effect of Cryogenic Treatment on the Microstructure and Wear Resistance of X45Cr9Si3 and X53Cr22Mn9Ni4N Valve Steels. Tribology Transactions 54:3, pages 341-350.
Read now
NirmalS. Kalsi, Rakesh Sehgal & VishalS. Sharma. (2010) Cryogenic Treatment of Tool Materials: A Review. Materials and Manufacturing Processes 25:10, pages 1077-1100.
Read now
M. Pellizzari. (2010) Influence of deep cryogenic treatment on heat treatment of steel and Cu–Be alloy. International Heat Treatment and Surface Engineering 4:3, pages 105-109.
Read now
D. Das, A. K. Dutta & K. K. Ray. (2009) Inconsistent wear behaviour of cryotreated tool steels: role of mode and mechanism. Materials Science and Technology 25:10, pages 1249-1257.
Read now
D. Das, A.K. Dutta & K.K. Ray. (2009) On the refinement of carbide precipitates by cryotreatment in AISI D2 steel. Philosophical Magazine 89:1, pages 55-76.
Read now
D. Das, A.K. Dutta & K.K. Ray. (2008) On the enhancement of wear resistance of tool steels by cryogenic treatment. Philosophical Magazine Letters 88:11, pages 801-811.
Read now

Articles from other publishers (112)

Ganesh Shete, Punit Singh & Megha Nagrale. (2023) Effect of cutting parameters on various output responses for cryo-treated INCONEL X750 alloy. International Journal on Interactive Design and Manufacturing (IJIDeM).
Crossref
Jun Li, Xu Zhang, Hengyong Bu, Huarong Qi, Pengpeng Zuo, Shaohong Li & Mengnie Li. (2023) Effects of deep cryogenic treatment on the microstructure evolution, mechanical and thermal fatigue properties of H13 hot work die steel. Journal of Materials Research and Technology 27, pages 8100-8118.
Crossref
Prashant Veer, S.C. Vettivel, Jatinder Madan & B.S. Pabla. (2023) Mechanical and tribological characterization of 3D printed-cryogenically treated thermoplastic polyurethane. Materials Today: Proceedings.
Crossref
Qianwei Guo, Hanghang Liu, Chen Sun, Hongwei Liu, Yanfei Cao, Leitao Wang, Xin Cai, Paixian Fu, Pei Wang & Dianzhong Li. (2023) Effectively improving the hardness-strength-toughness of carburized bearing steel via nanoprecipitates and fine grain structure. Materials Science and Engineering: A 872, pages 144961.
Crossref
Hongqing Wu, Hong Mao, Hui Ning, Zhipeng Deng & Xiaochun Wu. (2023) Friction Behavior and Self-Lubricating Mechanism of SLD-MAGIC Cold Worked Die Steel during Different Wear Conditions. Metals 13:4, pages 809.
Crossref
Gülşah Akıncıoğlu. (2022) Effect of deep sub-zero treatment on the wear behavior of CPPU steel at different temperatures. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 237:2, pages 374-387.
Crossref
Monireh Ahmadi, Omid Mirzaee, Maboobeh Azadi & Hootan Biukani. (2023) Effects of various double-quenching treatments on the microstructure and corrosion properties of D2 tool steel. International Journal of Pressure Vessels and Piping 202, pages 104915.
Crossref
Yixiang Liu, Hao Wang, Yinglong Zhao, Xiang Hou, Xiaoli Wang, Huijie Xia, Bo Song, Linjiang Chai, Ning Guo & Shengfeng Guo. (2023) Effect of Hot Torsion on Microstructure and Properties of Precipitation Hardening Martensitic Stainless Steel. Journal of Materials Engineering and Performance.
Crossref
Bappa Das, Biranchi N. Panda & Uday S. Dixit. (2023) Effects of Heat Treatment on the Mechanical Properties of Fe-Based ER70S-6 Cladding on Aluminum Substrate Using Cold Metal Transfer Process. Journal of Materials Engineering and Performance.
Crossref
Mahmoud A. Essam, Ahmed Y. Shash, Mohamed Kamal El-Fawakhry, Emad El-Kashif & Hassan Megahed. (2023) Effect of Deep Cryogenic Treatment on Wear Behavior of Cold Work Tool Steel. Metals 13:2, pages 382.
Crossref
Fuat Kara, Yılmaz Küçük, Onur Özbek, Nursel Altan Özbek, Mustafa Sabri Gök, Emre Altaş & İlyas Uygur. (2023) Effect of cryogenic treatment on wear behavior of Sleipner cold work tool steel. Tribology International 180, pages 108301.
Crossref
Ümit Er & Fatih Bozkurt. (2022) Investigation of the Effects of Cryogenic Treatment on the Friction and Wear Properties of 36CrB4 Boron Steel. Arabian Journal for Science and Engineering 47:12, pages 16209-16221.
Crossref
Hana Jirková, Kateřina Rubešová, Štěpán Jeníček, David Hradil & Ludmila Kučerová. (2022) Improving the Wear Resistance of Ledeburitic Tool Steels by a Combination of Semi-Solid and Cryogenic Processing. Metals 12:11, pages 1869.
Crossref
LiXiong Han, Yan Wang, ShiFeng Liu, ZhaoHui Zhang, Xi Song, YunZhe Li, Wei Liu, ZhaoPeng Yang & MinQiang Mu. (2022) Effect of cryogenic treatment on the microstructure and mechanical properties of selected laser melted H13 steel. Journal of Materials Research and Technology 21, pages 5056-5065.
Crossref
Moganapriya Chinnasamy, Rajasekar Rathanasamy, Samir Kumar Pal & Sathish Kumar Palaniappan. (2022) Effectiveness of cryogenic treatment on cutting tool inserts: A review. International Journal of Refractory Metals and Hard Materials 108, pages 105946.
Crossref
Bence Trautman, László Tóth & Enikő Réka Fábián. (2022) Comparison of Tool Steels for Tube End Flanging. Acta Materialia Transylvanica 5:2, pages 93-98.
Crossref
Gurkirat Singh & K.N. Pandey. (2022) Effect of cryogenic treatment on properties of materials: A review. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 236:4, pages 1758-1773.
Crossref
Ergün EKİCİ & Gültekin UZUN. (2022) Effects on machinability of cryogenic treatment applied to carbide tools in the milling of Ti6AI4V with optimization via the Taguchi method and grey relational analysis. Journal of the Brazilian Society of Mechanical Sciences and Engineering 44:7.
Crossref
Venu Yarasu, Peter Jurci, Jakub Hornik & Stanislav Krum. (2022) Optimization of cryogenic treatment to improve the tribological behavior of Vanadis 6 steel using the Taguchi and grey relation approach. Journal of Materials Research and Technology 18, pages 2945-2962.
Crossref
László Tóth. (2022) Reduction of Retained Austenite in Tool Steels. Műszaki Tudományos Közlemények 16:1, pages 52-57.
Crossref
Tanju Teker, S. Osman Yilmaz & S. Özmen Eruslu. (2022) Effect of austempering treatment on metallurgical structure of Ce inoculated X210Cr12 cold work tool steel. Materials Testing 64:1, pages 78-87.
Crossref
Tony Varghese, K. Sreekumar, K. Thomas Tharian & Saju Sebastian. 2022. Recent Advances in Manufacturing Processes and Systems. Recent Advances in Manufacturing Processes and Systems 361 368 .
Tarang Shinde, Catalin Pruncu, Narendra B. Dhokey, Anca C. Parau & Alina Vladescu. (2021) Effect of Deep Cryogenic Treatment on Corrosion Behavior of AISI H13 Die Steel. Materials 14:24, pages 7863.
Crossref
Chengsong Cui, Juan Dong, Jérémy Epp, Alwin Schulz, Matthias Steinbacher, Serdal Acar, Sebastian Herbst & Hans Jürgen Maier. (2021) In Situ X‐Ray Diffraction Analysis of Microstructure Evolution during Deep Cryogenic Treatment and Tempering of Tool Steels. steel research international 92:12.
Crossref
Congpeng Kang, Fubin Liu, Zhouhua Jiang, Haoyang Suo, Xinhao Yu, Haibao Zhang & Shineng Ding. (2021) Effect of cryogenic treatment on microstructure evolution and mechanical properties of high nitrogen plastic die steel. Journal of Materials Research and Technology 15, pages 5128-5140.
Crossref
Munish Kumar, Hazoor Singh Sidhu & Buta Singh Sidhu. (2021) Slurry erosion behavior of hydro-turbine steel treated cryogenically at different soaking periods. Materials Research Express 8:10, pages 106524.
Crossref
Fengxiang Shang, Jinxing Kong, Dongxing Du, Zheng Zhang & Yunhua Li. (2021) Effect of Cryogenic Treatment on Internal Residual Stresses of Hydrogen-Resistant Steel. Micromachines 12:10, pages 1179.
Crossref
D Hradil, M Duchek, H Jirková & K. Rubešová. (2021) Impact of semi-solid processing and cryogenic treatment on wear resistance of X210Cr12 tool steel. IOP Conference Series: Materials Science and Engineering 1178:1, pages 012021.
Crossref
Seoung-Ho Lim, KenHee Ryou, Kyuseon Jang, Won Seok Choi, Hyuck Mo Lee & Pyuck-Pa Choi. (2021) Hot cracking behavior of additively manufactured D2 steel. Materials Characterization 178, pages 111217.
Crossref
R. Mahendran, P. Rajkumar, L. Nirmal Raj, S. Karthikeyan & L. Rajeshkumar. (2021) Effect of deep cryogenic treatment on tool life of multilayer coated carbide inserts by shoulder milling of EN8 steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering 43:8.
Crossref
Sıtkı Akıncıoğlu. (2021) Investigation of the Effect of Deep Cryogenic Process on the Tribological Properties of X153CrMoV12 Mold Steel. Journal of Materials Engineering and Performance 30:4, pages 2843-2852.
Crossref
Bilal Kurşuncu. (2020) The effect of cryogenic treatment on dry sliding wear mechanisms in hard coatings. Industrial Lubrication and Tribology 73:1, pages 97-102.
Crossref
Mangal Singh Sisodiya & Vivek Bajpai. (2021) An Insight: Machining of Titanium Alloys & Associated Tool Wear. IOP Conference Series: Materials Science and Engineering 1017:1, pages 012013.
Crossref
KMB. Karthikeyan, C. Yuvaraj & T. Balasubramanian. (2021) Tensile test fractography of subzero treated EN24 alloy steel. Materials Today: Proceedings 46, pages 3205-3211.
Crossref
Sunil Kumar, Saikat Ranjan Maity & Lokeswar Patnaik. (2021) A comparative study on wear behaviors of hot work and cold work tool steel with same hardness under dry sliding tribological test. Materials Today: Proceedings 44, pages 949-954.
Crossref
Ravi Thakurai, Hemendra Patle, B. Ratna Sunil & Ravikumar Dumpala. (2021) Effect of cryogenic treatment duration on the microhardness and tribological behavior of 40CrMoV5 tool steel. Materials Today: Proceedings 38, pages 2140-2144.
Crossref
Jure Voglar, Živa Novak, Patricia Jovičević-Klug, Bojan Podgornik & Tadeja Kosec. (2020) Effect of Deep Cryogenic Treatment on Corrosion Properties of Various High-Speed Steels. Metals 11:1, pages 14.
Crossref
Ajesh Antony, Natalya M. Schmerl, Anna Sokolova, Reza Mahjoub, Daniel Fabijanic & Nikki E. Stanford. (2020) Quantification of the Dislocation Density, Size, and Volume Fraction of Precipitates in Deep Cryogenically Treated Martensitic Steels. Metals 10:11, pages 1561.
Crossref
Bilal Kursuncu. (2020) Influence of cryogenic heat-treatment soaking period and temperature on performance of sintered carbide cutting tools in milling of Inconel 718. International Journal of Refractory Metals and Hard Materials 92, pages 105323.
Crossref
Li Wang, Chaofang Dong, Yu Cao, Jianxiong Liang, Kui Xiao & Xiaogang Li. (2020) Co-enhancing the Mechanical Property and Corrosion Resistance of Selective Laser Melted High-Strength Stainless Steel via Cryogenic Treatment. Journal of Materials Engineering and Performance 29:11, pages 7052-7062.
Crossref
Alwin Schulz, Chengsong Cui, Matthias Steinbacher, Tuncer Ümit, Martin Wunde, Ingrid Jung, Serdal Acar, Florian Nürnberger, Gregory Gerstein, Sebastian Herbst & Hans Jürgen Maier. (2020) Effects of Cryogenic Treatment on the Microstructure and Mechanical Properties of High-alloyed Tool Steels. HTM Journal of Heat Treatment and Materials 75:5, pages 73-93.
Crossref
Satish Kumar, Arunkumar Bongale & Nitin Khedkar. (2020) Machining performance evaluation of liquid nitrogen treated M2 cutting tools for turning operations. FME Transactions 48:2, pages 227-235.
Crossref
Sunil Kumar, Saikat Ranjan Maity & Lokeswar Patnaik. (2020) Effect of heat treatment and TiN coating on AISI O1 cold work tool steel. Materials Today: Proceedings 26, pages 685-688.
Crossref
Abbas Razavykia, Cristiana Delprete & Paolo Baldissera. (2019) Correlation between Microstructural Alteration, Mechanical Properties and Manufacturability after Cryogenic Treatment: A Review. Materials 12:20, pages 3302.
Crossref
Enikő Réka Fábián, László Tóth & Csenge Huszák. (2019) Examination of Heat Treatment on the Microstructure and Wear of Tool Steels. Acta Materialia Transylvanica 2:2, pages 87-92.
Crossref
Yuanchun Huang, Ying Li, Xianwei Ren & Zhengbing Xiao. (2019) Effect of Deep Cryogenic Treatment on Aging Processes of Al–Mg–Si Alloy. Physics of Metals and Metallography 120:9, pages 914-918.
Crossref
Ney José Luiggi A. (2019) Study of elastic, structural, electronic, magnetic, and topological properties of η-Fe2C carbide under pressure. Journal of Physics and Chemistry of Solids 131, pages 196-212.
Crossref
Tanju Teker, I. Savaş Dalmis & Rana Yilmaz. (2019) Effect of heat treatment on the wear behavior of GX200Cr13Ni6WMoMn. Materials Testing 61:5, pages 441-447.
Crossref
Junwan Li, Yongan Min, Peiying Wang, Xin Cai & Xiaochun Wu. (2018) Analysis of Distortion Mechanism of a Cold Work Tool Steel During Quenching and Deep Cryogenic Treatment. Metals and Materials International 25:3, pages 546-558.
Crossref
Rahul & Saurav Datta. (2019) Electrical Discharge Machining Performance of Deep Cryogenically Treated Inconel 825 Superalloy: Emphasis on Surface Integrity. Metallography, Microstructure, and Analysis 8:2, pages 212-225.
Crossref
M. Pervaz Ahmed & H. Siddhi Jailani. (2018) Enhancing Wear Resistance of Cryo Treated Cu-Be2 Alloy. Silicon 11:1, pages 105-115.
Crossref
Vinay Varghese, M.R. Ramesh & D. Chakradhar. (2019) Influence of deep cryogenic treatment on performance of cemented carbide (WC-Co) inserts during dry end milling of maraging steel. Journal of Manufacturing Processes 37, pages 242-250.
Crossref
N. B. Dhokey, P. Lalge, A. Rajankar, K. Bawane & R. Mahajan. 2019. Proceedings of the 7th International Conference on Fracture Fatigue and Wear. Proceedings of the 7th International Conference on Fracture Fatigue and Wear 569 580 .
Junwan Li, Xin Cai, Yiwen Wang & Xiaochun Wu. (2018) Multiscale Analysis of the Microstructure and Stress Evolution in Cold Work Die Steel during Deep Cryogenic Treatment. Materials 11:11, pages 2122.
Crossref
Dileep Korade, Kavuluri Venkata Ramana & Kirankumar Jagtap. (2018) Influence of Cryogenic Treatment on the Tribological Behaviour of AISI H21 Tool Steel. Materials Research 22:1.
Crossref
Hai-feng Xu, Gui-lin Wu, Chang Wang, Jian Li & Wen-quan Cao. (2018) Microstructure, hardness and contact fatigue properties of X30N high nitrogen stainless bearing steel. Journal of Iron and Steel Research International 25:9, pages 954-967.
Crossref
Shaohong Li, Maoguo Xiao, Guomin Ye, Kunyu Zhao & Maosheng Yang. (2018) Effects of deep cryogenic treatment on microstructural evolution and alloy phases precipitation of a new low carbon martensitic stainless bearing steel during aging. Materials Science and Engineering: A 732, pages 167-177.
Crossref
D. Palanisamy & P. Senthil. (2018) A comparative study on machinability of cryo-treated and peak aged 15Cr-5Ni precipitation hardened stainless steel. Measurement 116, pages 162-169.
Crossref
Enes Ersöz & İsmail Ovalı. (2018) AISI D2 Soğuk İş Takım Çeliğine Uygulanan Endüstriyel Kriyojenik İşlemin Aşınma Davranışları Üzerindeki Etkisi. Journal of Polytechnic.
Crossref
政 刘. (2018) Effect of Cryogenic Treatment Time on Microstructure and Properties of 17CrNiMo6 Steel. Material Sciences 08:07, pages 828-836.
Crossref
Peter Jurči, Jana Ptačinová, Martin Sahul, Mária Dománková & Ivo Dlouhy. (2018) Metallurgical principles of microstructure formation in sub-zero treated cold-work tool steels – a review. Matériaux & Techniques 106:1, pages 104.
Crossref
Jana Ptačinová, Viktória Sedlická, Mária Hudáková, Ivo Dlouhý & Peter Jurči. (2017) Microstructure – Toughness relationships in sub-zero treated and tempered Vanadis 6 steel compared to conventional treatment. Materials Science and Engineering: A 702, pages 241-258.
Crossref
Gaurav Kumar Dhuria, Rupinder Singh & Ajay Batish. (2016) Application of a hybrid Taguchi-entropy weight-based GRA method to optimize and neural network approach to predict the machining responses in ultrasonic machining of Ti–6Al–4V. Journal of the Brazilian Society of Mechanical Sciences and Engineering 39:7, pages 2619-2634.
Crossref
Fatih Hayati Çakir & Osman Nuri Çelik. (2017) The effects of cryogenic treatment on the toughness and tribological behaviors of eutectoid steel. Journal of Mechanical Science and Technology 31:7, pages 3233-3239.
Crossref
Junji Li, Xianguo Yan, Xiaoyang Liang, Hong Guo & D.Y. Li. (2017) Influence of different cryogenic treatments on high-temperature wear behavior of M2 steel. Wear 376-377, pages 1112-1121.
Crossref
Shaohong Li, Kunyu Zhao, Kang Wang & Maosheng Yang. (2017) Microstructural evolution and thermal stability after aging of a cobalt-containing martensitic bearing steel. Materials Characterization 124, pages 154-164.
Crossref
Gurnam Singh, Simranpreet Singh Gill & Manu Dogra. (2017) Techno-economic analysis of blanking punch life improvement by environment friendly cryogenic treatment. Journal of Cleaner Production 143, pages 1060-1068.
Crossref
T. Slatter & R. Thornton. 2017. Comprehensive Materials Finishing. Comprehensive Materials Finishing 421 454 .
R. Singh, G. Dhuria & A. Batish. 2017. Reference Module in Materials Science and Materials Engineering. Reference Module in Materials Science and Materials Engineering.
Gaurav Dhuria, Rupinder Singh & Ajay Batish. (2016) Predictive modeling of surface roughness in ultrasonic machining of cryogenic treated Ti-6Al-4V. Engineering Computations 33:8, pages 2377-2394.
Crossref
Yusuf Arslan & Ahmet Özdemir. (2016) Punch structure, punch wear and cut profiles of AISI 304 stainless steel sheet blanks manufactured using cryogenically treated AISI D3 tool steel punches. The International Journal of Advanced Manufacturing Technology 87:1-4, pages 587-599.
Crossref
Jana Sobotova, Petr Jurci & Ivo Dlouhy. (2016) The effect of subzero treatment on microstructure, fracture toughness, and wear resistance of Vanadis 6 tool steel. Materials Science and Engineering: A 652, pages 192-204.
Crossref
C C Wu, W C Chen & L H Chen. (2015) Effects of cryogenic treatment on mechanical property and microstructure of JIS SKH51 high-speed steel. IOP Conference Series: Materials Science and Engineering 103, pages 012022.
Crossref
Adem Çiçek, Fuat Kara, Turgay Kıvak, Ergün Ekici & İlyas Uygur. (2015) Effects of Deep Cryogenic Treatment on the Wear Resistance and Mechanical Properties of AISI H13 Hot-Work Tool Steel. Journal of Materials Engineering and Performance 24:11, pages 4431-4439.
Crossref
Dae-Cheol Ko, Sung-Gwi Kim & Byung-Min Kim. (2015) Influence of microstructure on galling resistance of cold-work tool steels with different chemical compositions when sliding against ultra-high-strength steel sheets under dry condition. Wear 338-339, pages 362-371.
Crossref
Sıtkı Akincioğlu, Hasan Gökkaya & İlyas Uygur. (2015) A review of cryogenic treatment on cutting tools. The International Journal of Advanced Manufacturing Technology 78:9-12, pages 1609-1627.
Crossref
Dagmar JandováPavel ŠuchmannJana Nižňanská. (2015) Microstructure of Tool Steel X37CrMoV5 after Cryogenic Treatment and its Effect on Wear Resistance. Key Engineering Materials 647, pages 23-37.
Crossref
Saeed Kahrobaee & Mehrdad Kashefi. (2015) Assessment of Retained Austenite in AISI D2 Tool Steel Using Magnetic Hysteresis and Barkhausen Noise Parameters. Journal of Materials Engineering and Performance 24:3, pages 1192-1198.
Crossref
Peter Jurči, Martin Kusý, Jana Ptačinová, Vladimír Kuracina & Petra Priknerová. (2015) Long-term Sub-zero Treatment of P/M Vanadis 6 Ledeburitic Tool Steel - a Preliminary Study. Manufacturing Technology 15:1, pages 41-47.
Crossref
Peter Jurči, Mária Dománková, Ľubomír Čaplovič, Jana Ptačinová, Jana Sobotová, Petra Salabová, Otakar Prikner, Borivoj Šuštaršič & Darja Jenko. (2015) Microstructure and hardness of sub-zero treated and no tempered P/M Vanadis 6 ledeburitic tool steel. Vacuum 111, pages 92-101.
Crossref
Swamini A. Chopra & V.G. Sargade. (2015) Metallurgy behind the Cryogenic Treatment of Cutting Tools: An Overview. Materials Today: Proceedings 2:4-5, pages 1814-1824.
Crossref
Ibrahim Gunes, Adem Cicek, Kubilay Aslantas & Fuat Kara. (2014) Effect of Deep Cryogenic Treatment on Wear Resistance of AISI 52100 Bearing Steel. Transactions of the Indian Institute of Metals 67:6, pages 909-917.
Crossref
Wei Wang, Venkateswaran Srinivasan, Sri Siva, Bensely Albert, Mohan Lal & Akram Alfantazi. (2014) Corrosion Behavior of Deep Cryogenically Treated AISI 420 and AISI 52100 Steel. CORROSION 70:7, pages 708-720.
Crossref
Prabhat Kumar, Kausik Chattopadhyay & Indrajit Chakrabarty. (2014) Effect of Sub-critical Tempering and Deep Cryogenic Treatment on Slurry Erosion of Cr–Mn–Cu White Cast Irons. ISIJ International 54:10, pages 2294-2301.
Crossref
Feng Hu, Kaiming Wu, Peter Damian Hodgson & Amir Abbas Shirzadi. (2014) Refinement of Retained Austenite in Super-bainitic Steel by a Deep Cryogenic Treatment. ISIJ International 54:1, pages 222-226.
Crossref
M.K. Vidyarthi, A.K. Ghose & I. Chakrabarty. (2013) Effect of deep cryogenic treatment on the microstructure and wear performance of Cr–Mn–Cu white cast iron grinding media. Cryogenics 58, pages 85-92.
Crossref
Kaixuan Gu, Hong Zhang, Bing Zhao, Junjie Wang, Yuan Zhou & Zhiqiang Li. (2013) Effect of cryogenic treatment and aging treatment on the tensile properties and microstructure of Ti–6Al–4V alloy. Materials Science and Engineering: A 584, pages 170-176.
Crossref
Shaohong Li, Na Min, Junwan Li & Xiaochun Wu. (2013) Internal friction measurements of phase transformations during the process of deep cryogenic treatment of a tool steel. Cryogenics 57, pages 1-5.
Crossref
Shaohong Li, Na Min, Junwan Li, Xiaochun Wu, Chenhui Li & Leilei Tang. (2013) Experimental verification of segregation of carbon and precipitation of carbides due to deep cryogenic treatment for tool steel by internal friction method. Materials Science and Engineering: A 575, pages 51-60.
Crossref
Junwan Li, Leilei Tang, Shaohong Li & Xiaochun Wu. (2013) Finite element simulation of deep cryogenic treatment incorporating transformation kinetics. Materials & Design 47, pages 653-666.
Crossref
X.G. Yan & D.Y. Li. (2013) Effects of the sub-zero treatment condition on microstructure, mechanical behavior and wear resistance of W9Mo3Cr4V high speed steel. Wear 302:1-2, pages 854-862.
Crossref
A. Akhbarizadeh, S. Javadpour, K. Amini & A.H. Yaghtin. (2013) Investigating the effect of ball milling during the deep cryogenic heat treatment of the 1.2080 tool steel. Vacuum 90, pages 70-74.
Crossref
Amin Akhbarizadeh, Sirus Javadpour & Kamran Amini. (2013) Investigating the effect of electric current flow on the wear behavior of 1.2080 tool steel during the deep cryogenic heat treatment. Materials & Design 45, pages 103-109.
Crossref
Simranpreet Singh Gill & Harpreet Singh. 2013. Polymers at Cryogenic Temperatures. Polymers at Cryogenic Temperatures 245 273 .
Kamran Amini, Amin Akhbarizadeh & Sirus Javadpour. (2012) Effect of deep cryogenic treatment on the formation of nano-sized carbides and the wear behavior of D2 tool steel. International Journal of Minerals, Metallurgy, and Materials 19:9, pages 795-799.
Crossref
Simranpreet Singh Gill, Jagdev Singh, Rupinder Singh & Harpreet Singh. (2011) Effect of Cryogenic Treatment on AISI M2 High Speed Steel: Metallurgical and Mechanical Characterization. Journal of Materials Engineering and Performance 21:7, pages 1320-1326.
Crossref
Kamran Amini, Amin Akhbarizadeh & Sirus Javadpour. (2012) Investigating the effect of holding duration on the microstructure of 1.2080 tool steel during the deep cryogenic heat treatment. Vacuum 86:10, pages 1534-1540.
Crossref
Debdulal Das & Kalyan Kumar Ray. (2012) Structure–property correlation of sub-zero treated AISI D2 steel. Materials Science and Engineering: A 541, pages 45-60.
Crossref
Simranpreet Singh Gill, Jagdev Singh, Rupinder Singh & Harpreet Singh. (2010) Metallurgical principles of cryogenically treated tool steels—a review on the current state of science. The International Journal of Advanced Manufacturing Technology 54:1-4, pages 59-82.
Crossref
Xiaochun Wu & Luoping Xu. 2011. Advanced Steels. Advanced Steels 423 441 .
Debdulal Das, Rajdeep Sarkar, Apurba Kishore Dutta & Kalyan Kumar Ray. (2010) Influence of sub-zero treatments on fracture toughness of AISI D2 steel. Materials Science and Engineering: A 528:2, pages 589-603.
Crossref
Shaohong Li, Lihui Deng, Xiaochun Wu, Hongbin Wang, Yong’an Min & Na Min. (2010) Effect of deep cryogenic treatment on internal friction behaviors of cold work die steel and their experimental explanation by coupling model. Materials Science and Engineering: A 527:29-30, pages 7950-7954.
Crossref
A. Oppenkowski, S. Weber & W. Theisen. (2010) Evaluation of factors influencing deep cryogenic treatment that affect the properties of tool steels. Journal of Materials Processing Technology 210:14, pages 1949-1955.
Crossref
Shaohong Li, Lihui Deng, Xiaochun Wu, Yong’an Min & Hongbin Wang. (2010) Influence of deep cryogenic treatment on microstructure and evaluation by internal friction of a tool steel. Cryogenics 50:11-12, pages 754-758.
Crossref
Shaohong Li, Lihui Deng & Xiaochun Wu. (2010) The mechanism investigation of deep cryogenic treatment on high alloy martensitic steel by low frequency internal friction. Cryogenics 50:8, pages 433-438.
Crossref
Debdulal Das, Apurba Kishore Dutta & Kalyan Kumar Ray. (2010) Sub-zero treatments of AISI D2 steel: Part II. Wear behavior. Materials Science and Engineering: A 527:9, pages 2194-2206.
Crossref
Debdulal Das, Apurba Kishore Dutta & Kalyan Kumar Ray. (2010) Sub-zero treatments of AISI D2 steel: Part I. Microstructure and hardness. Materials Science and Engineering: A 527:9, pages 2182-2193.
Crossref
Simranpreet Singh Gill, Harpreet Singh, Rupinder Singh & Jagdev Singh. (2009) Cryoprocessing of cutting tool materials—a review. The International Journal of Advanced Manufacturing Technology 48:1-4, pages 175-192.
Crossref
D. Das, A.K. Dutta & K.K. Ray. (2009) Correlation of microstructure with wear behaviour of deep cryogenically treated AISI D2 steel. Wear 267:9-10, pages 1371-1380.
Crossref
D. Das, K.K. Ray & A.K. Dutta. (2009) Influence of temperature of sub-zero treatments on the wear behaviour of die steel. Wear 267:9-10, pages 1361-1370.
Crossref
D. Das, A.K. Dutta & K.K. Ray. (2009) Optimization of the duration of cryogenic processing to maximize wear resistance of AISI D2 steel. Cryogenics 49:5, pages 176-184.
Crossref
D. Das, A.K. Dutta & K.K. Ray. (2009) Influence of varied cryotreatment on the wear behavior of AISI D2 steel. Wear 266:1-2, pages 297-309.
Crossref

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.